Add this new metric (where sda is active and sdb is in standby mode):
smartmon_device_active{disk="/dev/sda",type="sat"} 1
smartmon_device_active{disk="/dev/sdb",type="sat"} 0
Also skip further metrics if the drive is in a low-power mode. This
prevents spinning up disks just to get the metrics (which matches e.g.
debian's default behavior for smartd).
Signed-off-by: Andre Heider <a.heider@gmail.com>
* netstat: Add TCP In/Out Segs
In order to get a better idea of TCP packet loss, we need to know how
many `node_netstat_Tcp_OutSegs` there are so we can compare this to
`node_netstat_Tcp_RetransSegs`.
Signed-off-by: Ben Kochie <superq@gmail.com>
* Update fixtures
Signed-off-by: Ben Kochie <superq@gmail.com>
* Add fallback for missing /proc/1/mounts
On some systems, `/proc/1/mounts` is hidden from non-root users due to
the `hidepid` procfs feature. Attempt to fallback to `/proc/mounts` if
`/proc/1/mounts` is not found.
Signed-off-by: Ben Kochie <superq@gmail.com>
* Add tests.
Signed-off-by: Ben Kochie <superq@gmail.com>
* Add CHANGELOG entry.
Signed-off-by: Ben Kochie <superq@gmail.com>
The pull request #1002 changed the logic used on Linux servers to determine if a filesystem is
read-only. As a result of this change, the variable `readOnly` is now unused and can be removed.
Signed-off-by: Jerome Froelich <jeromefroelich@hotmail.com>
* Convert to Go modules
* Update promu config.
* Convert to Go modules.
* Update vendoring.
* Update Makefile.common.
* Update circleci config.
* Use Prometheus release tar for promtool.
* Fixup unpack
* Use temp dir for unpacking tools.
* Use BSD compatible tar command.
* OpenBSD mkdir doesn't support `-v`.
Signed-off-by: Ben Kochie <superq@gmail.com>
We use the output-compatible perccli and storcli.py does not handle 'Unknown' as a result:
```
sg="Error parsing \"/var/lib/node_exporter/perccli.prom\": text format parsing error in line 222: expected float as value, got \"Unknown\"" source="textfile.go:212"
```
I know, the perccli should not return 'Unknown' but this error breaks all other useful measurements because the prom file is not parsable. My if condition fixes this.
Signed-off-by: Andreas Wirooks <andreas.wirooks@1und1.de>
In order to avoid stuck collectors using up all system resources, add a
limit to the number of parallel in-flight scrape requests. This will
return a 503 error.
Default to 40 requests, this seems like a reasonable number based on:
* Two Prometheus servers scraping every 15 seconds.
* Failing scrapes after 5 minutes of stuckness.
Signed-off-by: Ben Kochie <superq@gmail.com>
If this flag is set, the metrics about the exporter itself (go_*,
process_*, promhttp_*) will be excluded from /metrics.
The Kingpin way of handling boolean flags makes the negative flag
wording (_dis_able) the most reasonably one.
This also refactors the flow in node_exporter.go quite a bit to avoid
mixing up the global and a local registry and to avoid re-creating a
registry even if no filtering is requested.
Signed-off-by: beorn7 <beorn@soundcloud.com>
Tcp SYN packet retransmits are a very useful signal as they affect
network performance disproportionately to regular TCP retransmits.
Signed-off-by: Ben Kochie <superq@gmail.com>
* storcli.py: Remove IntEnum
This removes an external dependency.
Moved VD state to VD info labels
* storcli.py: Fix BBU health detection
BBU Status is 0 for a healthy cache vault and 32 for a healthy BBU.
* storcli.py: Strip all strings from PD
Strip all strings that we get from PDs.
They often contain whitespaces....
* storcli.py: Add formatting options
Add help text explaining how this documented was formatted
* storcli.py: Add DG to pd_info label
Add disk group to pd_info.
That way we can relate to PDs in the same DG.
For example to check if all disks in one RAID
use the same interface...
* storcli.py: Fix promtool issues
Fix linting issues reported by promtool check-metrics
* storcli.py: Exit if storcli reports issues
storcli reports if the command was a success.
We should not continue if there are issues.
* storcli.py: Try to parse metrics to float
This will sanitize the values we hand over to
node_exporter - eliminating any unforeseen values we read out...
* storcli.py: Refactor code to implement handle_sas_controller()
Move code into methods so that we can now also support HBA queries.
* storcli.py: Sort inputs
"...like a good python developer"
- Daniel Swarbrick
* storcli.py: Replace external dateutil library with internal datetime
Removes external dependency...
* storcli.py: Also collect temperature on megaraid cards
We have already collected them on mpt3sas cards...
* storcli.py: Clean up old code
Removed dead code that is not used any more.
* storcli.py: strip() all information for labels
They often contain whitespaces...
* storcli.py: Try to catch KeyErrors generally
If some key we expect is not there, we will want to
still print whatever we have collected so far...
* storcli.py: Increment version number
We have made some changes here and there.
The general look of the data has not been changed.
* storcli.py: Fix CodeSpell issue
Split string to avoid issues with Codespell due to Celcius in JSON Key
Signed-off-by: Christopher Blum <zeichenanonym@web.de>
* deleted_libraries: Upgrade to Python 3
Python 2.7 will not be maintained past 2020. Therefore upgrade
text_collector_examples/deleted_libraries.py to Python 3.
* Add mellanox_hca_temp text collector example
mellanox_hca_temp is a script that reads Mellanox HCA temperature using
the Mellanox mget_temp_ext tool.
Signed-off-by: Benjamin Drung <benjamin.drung@cloud.ionos.com>
In some cases the file might be called "temp" instead of the usual format "temp<index>_<item>"
as described in the kernel docs: https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
In this case, treat this as an _input file containing the current temperature reading.
Fixes#1122
Signed-off-by: Paul Gier <pgier@redhat.com>
* Update Linux cpufreq collector to use new procfs library functions.
* Split thermal throttle collection to a separate function.
* Add new required fixtures and repack ttar file.
Signed-off-by: Ben Kochie <superq@gmail.com>
The format of /proc/diskstats is changing in linux-4.19 to include some
additional fields. See: https://www.kernel.org/doc/Documentation/iostats.txt
* collector/diskstats: use constants for some hard coded strings
* collector/diskstats: update diskstats for linux-4.19
* collector/diskstats: remove kernel doc url from individual metrics
Signed-off-by: Paul Gier <pgier@redhat.com>
* State that wifi collector is disabled by default
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add the 'processes' collector to the Readme
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
LaunchDaemons are the correct way to create services that are restart proof.
There is now only a single destination place mentioned in the readme for the plist file.
Signed-off-by: Dávid Balakirev <dave00ster@gmail.com>
This is mostly required to fix a bug with histograms on 32bit platforms.
(Which might or might not be used in node_exporter. Just in case...)
Signed-off-by: beorn7 <beorn@soundcloud.com>
