Single-node version [scales perfectly](https://medium.com/@valyala/measuring-vertical-scalability-for-time-series-databases-in-google-cloud-92550d78d8ae)
with the number of CPU cores, RAM and available storage space.
Single-node version is easier to configure and operate comparing to cluster version, so think twice before sticking to cluster version.
Join [our Slack](http://slack.victoriametrics.com/) or [contact us](mailto:info@victoriametrics.com) with consulting and support questions.
## Prominent features
- Supports all the features of [single-node version](https://github.com/VictoriaMetrics/VictoriaMetrics).
by a separate service sitting in front of VictoriaMetrics cluster such as [vmauth](https://docs.victoriametrics.com/vmauth.html) or [vmgateway](https://docs.victoriametrics.com/vmgateway.html). [Contact us](mailto:info@victoriametrics.com) if you need assistance with such service.
* The database performance and resource usage doesn't depend on the number of tenants. It depends mostly on the total number of active time series in all the tenants. A time series is considered active if it received at least a single sample during the last hour or it has been touched by queries during the last hour.
Compiled binaries for cluster version are available in the `assets` section of [releases page](https://github.com/VictoriaMetrics/VictoriaMetrics/releases).
See archives containing `cluster` word.
Docker images for cluster version are available here:
An http load balancer such as [vmauth](https://docs.victoriametrics.com/vmauth.html) or `nginx` must be put in front of `vminsert` and `vmselect` nodes:
Each flag values can be set thru environment variables by following these rules:
- The `-envflag.enable` flag must be set
- Each `.` in flag names must be substituted by `_` (for example `-insert.maxQueueDuration <duration>` will translate to `insert_maxQueueDuration=<duration>`)
- For repeating flags, an alternative syntax can be used by joining the different values into one using `,` as separator (for example `-storageNode <nodeA> -storageNode <nodeB>` will translate to `storageNode=<nodeA>,<nodeB>`)
- It is possible setting prefix for environment vars with `-envflag.prefix`. For instance, if `-envflag.prefix=VM_`, then env vars must be prepended with `VM_`
All the cluster components expose various metrics in Prometheus-compatible format at `/metrics` page on the TCP port set in `-httpListenAddr` command-line flag.
It is recommended setting up alerts in [vmalert](https://docs.victoriametrics.com/vmalert.html) or in Prometheus from [this config](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/cluster/deployment/docker/alerts.yml).
-`<accountID>` is an arbitrary 32-bit integer identifying namespace for data ingestion (aka tenant). It is possible to set it as `accountID:projectID`,
where `projectID` is also arbitrary 32-bit integer. If `projectID` isn't set, then it equals to `0`.
-`prometheus` and `prometheus/api/v1/write` - for inserting data with [Prometheus remote write API](https://prometheus.io/docs/prometheus/latest/configuration/configuration/#remote_write)
-`influx/write` and `influx/api/v2/write` - for inserting data with [Influx line protocol](https://docs.influxdata.com/influxdb/v1.7/write_protocols/line_protocol_tutorial/).
-`prometheus/api/v1/import/csv` - for importing arbitrary CSV data. See [these docs](https://docs.victoriametrics.com/Single-server-VictoriaMetrics.html#how-to-import-csv-data) for details.
-`prometheus/api/v1/import/prometheus` - for importing data in [Prometheus text exposition format](https://github.com/prometheus/docs/blob/master/content/docs/instrumenting/exposition_formats.md#text-based-format) and in [OpenMetrics format](https://github.com/OpenObservability/OpenMetrics/blob/master/specification/OpenMetrics.md). See [these docs](https://docs.victoriametrics.com/Single-server-VictoriaMetrics.html#how-to-import-data-in-prometheus-exposition-format) for details.
-`api/v1/labels` - returns a [list of label names](https://prometheus.io/docs/prometheus/latest/querying/api/#getting-label-names).
-`api/v1/label/<label_name>/values` - returns values for the given `<label_name>` according [to API](https://prometheus.io/docs/prometheus/latest/querying/api/#querying-label-values).
-`api/v1/export` - exports raw data in JSON line format. See [this article](https://medium.com/@valyala/analyzing-prometheus-data-with-external-tools-5f3e5e147639) for details.
-`api/v1/export/native` - exports raw data in native binary format. It may be imported into another VictoriaMetrics via `api/v1/import/native` (see above).
-`render` - implements Graphite Render API. See [these docs](https://graphite.readthedocs.io/en/stable/render_api.html). This functionality is available in [Enterprise package](https://victoriametrics.com/enterprise.html).
-`tags/tagSeries` - registers time series. See [these docs](https://graphite.readthedocs.io/en/stable/tags.html#adding-series-to-the-tagdb).
-`tags/tagMultiSeries` - register multiple time series. See [these docs](https://graphite.readthedocs.io/en/stable/tags.html#adding-series-to-the-tagdb).
-`tags` - returns tag names. See [these docs](https://graphite.readthedocs.io/en/stable/tags.html#exploring-tags).
-`tags/<tag_name>` - returns tag values for the given `<tag_name>`. See [these docs](https://graphite.readthedocs.io/en/stable/tags.html#exploring-tags).
-`tags/autoComplete/tags` - returns tags matching the given `tagPrefix` and/or `expr`. See [these docs](https://graphite.readthedocs.io/en/stable/tags.html#auto-complete-support).
-`tags/autoComplete/values` - returns tag values matching the given `valuePrefix` and/or `expr`. See [these docs](https://graphite.readthedocs.io/en/stable/tags.html#auto-complete-support).
-`tags/delSeries` - deletes series matching the given `path`. See [these docs](https://graphite.readthedocs.io/en/stable/tags.html#removing-series-from-the-tagdb).
* URL for query stats across all tenants: `http://<vmselect>:8481/api/v1/status/top_queries`. It lists with the most frequently executed queries and queries taking the most duration.
* URL for time series deletion: `http://<vmselect>:8481/delete/<accountID>/prometheus/api/v1/admin/tsdb/delete_series?match[]=<timeseries_selector_for_delete>`.
Note that the `delete_series` handler should be used only in exceptional cases such as deletion of accidentally ingested incorrect time series. It shouldn't
be used on a regular basis, since it carries non-zero overhead.
*`vmstorage` nodes provide the following HTTP endpoints on `8482` port:
which can be used for backups in background. Snapshots are created in `<storageDataPath>/snapshots` folder, where `<storageDataPath>` is the corresponding
command-line flag value.
-`/snapshot/list` - list available snasphots.
-`/snapshot/delete?snapshot=<id>` - delete the given snapshot.
-`/snapshot/delete_all` - delete all the snapshots.
Snapshots may be created independently on each `vmstorage` node. There is no need in synchronizing snapshots' creation
Cluster performance and capacity scales with adding new nodes.
*`vminsert` and `vmselect` nodes are stateless and may be added / removed at any time.
Do not forget updating the list of these nodes on http load balancer.
Adding more `vminsert` nodes scales data ingestion rate. See [this comment](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/175#issuecomment-536925841)
about ingestion rate scalability.
Adding more `vmselect` nodes scales select queries rate.
*`vmstorage` nodes own the ingested data, so they cannot be removed without data loss.
Adding more `vmstorage` nodes scales cluster capacity.
Steps to add `vmstorage` node:
1. Start new `vmstorage` node with the same `-retentionPeriod` as existing nodes in the cluster.
2. Gradually restart all the `vmselect` nodes with new `-storageNode` arg containing `<new_vmstorage_host>:8401`.
3. Gradually restart all the `vminsert` nodes with new `-storageNode` arg containing `<new_vmstorage_host>:8400`.
-`vmselect` continues serving partial responses if at least a single `vmstorage` node is available. If consistency over availability is preferred, then either pass `-search.denyPartialResponse` command-line flag to `vmselect` or pass `deny_partial_response=1` query arg in requests to `vmselect`.
`vmselect` doesn't serve partial responses for API handlers returning raw datapoints - [`/api/v1/export*` endpoints](https://docs.victoriametrics.com/#how-to-export-time-series), since users usually expect this data is always complete.
* The recommended total number of vCPU cores for all the `vminsert` instances can be calculated from the ingestion rate: `vCPUs = ingestion_rate / 150K`.
* The recommended number of vCPU cores per each `vminsert` instance should equal to the number of `vmstorage` instances in the cluster.
* The amount of RAM per each `vminsert` instance should be 1GB or more. RAM is used as a buffer for spikes in ingestion rate.
* The recommended total number of vCPU cores for all the `vmstorage` instances can be calculated from the ingestion rate: `vCPUs = ingestion_rate / 150K`.
* The recommended total amount of RAM for all the `vmstorage` instances can be calculated from the number of active time series: `RAM = 2 * active_time_series * 1KB`.
The recommended hardware for `vmselect` instances highly depends on the type of queries. Lightweight queries over small number of time series usually require
small number of vCPU cores and small amount of RAM on `vmselect`, while heavy queries over big number of time series (>10K) usually require
bigger number of vCPU cores and bigger amounts of RAM.
It is recommended to run all the components for a single cluster in the same subnetwork with high bandwidth, low latency and low error rates.
This improves cluster performance and availability.
It isn't recommended spreading components for a single cluster across multiple availability zones, since cross-AZ network usually has lower bandwidth, higher latency
and higher error rates comparing the network inside AZ.
If you need multi-AZ setup, then it is recommended running independed clusters in each AZ and setting up
Another solution is to use multi-level cluster setup, where the top level of `vminsert` nodes [replicate](#replication-and-data-safety) data among the lower level of `vminsert` nodes located at different availability zones. These `vminsert` nodes then spread the data among `vmstorage` nodes in each AZ. See [these docs](#multi-level-cluster-setup) for more details.
## Multi-level cluster setup
`vminsert` nodes can accept data from another `vminsert` nodes starting from [v1.60.0](https://docs.victoriametrics.com/CHANGELOG.html#v1600) if `-clusternativeListenAddr` command-line flag is set. For example, if `vminsert` is started with `-clusternativeListenAddr=:8400` command-line flag, then it can accept data from another `vminsert` nodes at TCP port 8400 in the same way as `vmstorage` nodes do. This allows chaining `vminsert` nodes and building multi-level cluster topologies with flexible configs. For example, the top level of `vminsert` nodes can replicate data among the second level of `vminsert` nodes located in distinct availability zones (AZ), while the second-level `vminsert` nodes can spread the data among `vmstorage` nodes located in the same AZ. Such setup guarantees cluster availability if some AZ becomes unavailable. The data from all the `vmstorage` nodes in all the AZs can be read via `vmselect` nodes, which are configured to query all the `vmstorage` nodes in all the availability zones (e.g. all the `vmstorage` addresses are passed via `-storageNode` command-line flag to `vmselect` nodes). Additionally, `-replicationFactor=k+1` must be passed to `vmselect` nodes, where `k` is the lowest number of `vmstorage` nodes in a single AZ. See [replication docs](#replication-and-data-safety) for more details.
The cluster must contain at least `2*N-1``vmstorage` nodes, where `N`
is replication factor, in order to maintain the given replication factor for newly ingested data when `N-1` of storage nodes are lost.
For example, when `-replicationFactor=3` is passed to `vminsert`, then it replicates all the ingested data to 3 distinct `vmstorage` nodes,
so up to 2 `vmstorage` nodes can be lost without data loss. The minimum number of `vmstorage` nodes should be equal to `2*3-1 = 5`, so when 2 `vmstorage` nodes are lost,
the remaining 3 `vmstorage` nodes could provide the `-replicationFactor=3` for newly ingested data.
The `-replicationFactor=N` improves query performance when up to `N-1` vmstorage nodes respond slowly and/or temporarily unavailable. Sometimes `-replicationFactor` at `vmselect` nodes can result in partial responses. See [this issues](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1207) for details.
Note that the replication increases resource usage - CPU, RAM, disk space, network bandwidth - by up to `-replicationFactor` times. So it may be worth
offloading the replication to underlying storage pointed by `-storageDataPath` such as [Google Compute Engine persistent disk](https://cloud.google.com/compute/docs/disks/#pdspecs),
which is protected from data loss and data corruption. It also provide consistently high performance
It is recommended performing periodical backups from [instant snapshots](https://medium.com/@valyala/how-victoriametrics-makes-instant-snapshots-for-multi-terabyte-time-series-data-e1f3fb0e0282)
for protecting from user errors such as accidental data deletion.
The following steps must be performed for each `vmstorage` node for creating a backup:
1. Create an instant snapshot by navigating to `/snapshot/create` HTTP handler. It will create snapshot and return its name.
2. Archive the created snapshot from `<-storageDataPath>/snapshots/<snapshot_name>` folder using [vmbackup](https://docs.victoriametrics.com/vmbackup.html).
- Fragile gossip protocols. See [failed attempt in Thanos](https://github.com/improbable-eng/thanos/blob/030bc345c12c446962225221795f4973848caab5/docs/proposals/completed/201809_gossip-removal.md).
* [List of command-line flags for vminsert](#list-of-command-line-flags-for-vminsert)
* [List of command-line flags for vmselect](#list-of-command-line-flags-for-vmselect)
* [List of command-line flags for vmstorage](#list-of-command-line-flags-for-vmstorage)
### List of command-line flags for vminsert
Below is the output for `/path/to/vminsert -help`:
```
-clusternativeListenAddr string
TCP address to listen for data from other vminsert nodes in multi-level cluster setup. See https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#multi-level-cluster-setup . Usually :8400 must be set. Doesn't work if empty
-csvTrimTimestamp duration
Trim timestamps when importing csv data to this duration. Minimum practical duration is 1ms. Higher duration (i.e. 1s) may be used for reducing disk space usage for timestamp data (default 1ms)
-disableRerouting
Whether to disable re-routing when some of vmstorage nodes accept incoming data at slower speed compared to other storage nodes. By default the re-routing is enabled. Disabled re-routing limits the ingestion rate by the slowest vmstorage node. On the other side, disabled re-routing minimizes the number of active time series in the cluster
-enableTCP6
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP and UDP is used
-envflag.enable
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set
-envflag.prefix string
Prefix for environment variables if -envflag.enable is set
-fs.disableMmap
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
-graphiteListenAddr string
TCP and UDP address to listen for Graphite plaintext data. Usually :2003 must be set. Doesn't work if empty
-graphiteTrimTimestamp duration
Trim timestamps for Graphite data to this duration. Minimum practical duration is 1s. Higher duration (i.e. 1m) may be used for reducing disk space usage for timestamp data (default 1s)
-http.connTimeout duration
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
-http.disableResponseCompression
Disable compression of HTTP responses to save CPU resources. By default compression is enabled to save network bandwidth
-http.idleConnTimeout duration
Timeout for incoming idle http connections (default 1m0s)
-http.maxGracefulShutdownDuration duration
The maximum duration for a graceful shutdown of the HTTP server. A highly loaded server may require increased value for a graceful shutdown (default 7s)
-http.pathPrefix string
An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
-http.shutdownDelay duration
Optional delay before http server shutdown. During this delay, the server returns non-OK responses from /health page, so load balancers can route new requests to other servers
-httpListenAddr string
Address to listen for http connections (default ":8480")
-import.maxLineLen size
The maximum length in bytes of a single line accepted by /api/v1/import; the line length can be limited with 'max_rows_per_line' query arg passed to /api/v1/export
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 104857600)
-influx.databaseNames array
Comma-separated list of database names to return from /query and /influx/query API. This can be needed for accepting data from Telegraf plugins such as https://github.com/fangli/fluent-plugin-influxdb
Supports an array of values separated by comma or specified via multiple flags.
-influx.maxLineSize size
The maximum size in bytes for a single Influx line during parsing
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 262144)
-influxListenAddr string
TCP and UDP address to listen for Influx line protocol data. Usually :8189 must be set. Doesn't work if empty. This flag isn't needed when ingesting data over HTTP - just send it to http://<vminsert>:8480/insert/<accountID>/influx/write
-influxMeasurementFieldSeparator string
Separator for '{measurement}{separator}{field_name}' metric name when inserted via Influx line protocol (default "_")
-influxSkipMeasurement
Uses '{field_name}' as a metric name while ignoring '{measurement}' and '-influxMeasurementFieldSeparator'
-influxSkipSingleField
Uses '{measurement}' instead of '{measurement}{separator}{field_name}' for metic name if Influx line contains only a single field
-influxTrimTimestamp duration
Trim timestamps for Influx line protocol data to this duration. Minimum practical duration is 1ms. Higher duration (i.e. 1s) may be used for reducing disk space usage for timestamp data (default 1ms)
-insert.maxQueueDuration duration
The maximum duration for waiting in the queue for insert requests due to -maxConcurrentInserts (default 1m0s)
-loggerDisableTimestamps
Whether to disable writing timestamps in logs
-loggerErrorsPerSecondLimit int
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
-loggerFormat string
Format for logs. Possible values: default, json (default "default")
-loggerLevel string
Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO")
-loggerOutput string
Output for the logs. Supported values: stderr, stdout (default "stderr")
-loggerTimezone string
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
-loggerWarnsPerSecondLimit int
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
-maxConcurrentInserts int
The maximum number of concurrent inserts. Default value should work for most cases, since it minimizes the overhead for concurrent inserts. This option is tigthly coupled with -insert.maxQueueDuration (default 16)
-maxInsertRequestSize size
The maximum size in bytes of a single Prometheus remote_write API request
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 33554432)
-maxLabelsPerTimeseries int
The maximum number of labels accepted per time series. Superfluous labels are dropped (default 30)
-memory.allowedBytes size
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
-memory.allowedPercent float
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
-opentsdbHTTPListenAddr string
TCP address to listen for OpentTSDB HTTP put requests. Usually :4242 must be set. Doesn't work if empty
-opentsdbListenAddr string
TCP and UDP address to listen for OpentTSDB metrics. Telnet put messages and HTTP /api/put messages are simultaneously served on TCP port. Usually :4242 must be set. Doesn't work if empty
-opentsdbTrimTimestamp duration
Trim timestamps for OpenTSDB 'telnet put' data to this duration. Minimum practical duration is 1s. Higher duration (i.e. 1m) may be used for reducing disk space usage for timestamp data (default 1s)
-opentsdbhttp.maxInsertRequestSize size
The maximum size of OpenTSDB HTTP put request
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 33554432)
-opentsdbhttpTrimTimestamp duration
Trim timestamps for OpenTSDB HTTP data to this duration. Minimum practical duration is 1ms. Higher duration (i.e. 1s) may be used for reducing disk space usage for timestamp data (default 1ms)
-relabelConfig string
Optional path to a file with relabeling rules, which are applied to all the ingested metrics. See https://docs.victoriametrics.com/#relabeling for details
-relabelDebug
Whether to log metrics before and after relabeling with -relabelConfig. If the -relabelDebug is enabled, then the metrics aren't sent to storage. This is useful for debugging the relabeling configs
-replicationFactor int
Replication factor for the ingested data, i.e. how many copies to make among distinct -storageNode instances. Note that vmselect must run with -dedup.minScrapeInterval=1ms for data de-duplication when replicationFactor is greater than 1. Higher values for -dedup.minScrapeInterval at vmselect is OK (default 1)
-rpc.disableCompression
Whether to disable compression of RPC traffic. This reduces CPU usage at the cost of higher network bandwidth usage
-sortLabels
Whether to sort labels for incoming samples before writing them to storage. This may be needed for reducing memory usage at storage when the order of labels in incoming samples is random. For example, if m{k1="v1",k2="v2"} may be sent as m{k2="v2",k1="v1"}. Enabled sorting for labels can slow down ingestion performance a bit
-storageNode array
Address of vmstorage nodes; usage: -storageNode=vmstorage-host1:8400 -storageNode=vmstorage-host2:8400
Supports an array of values separated by comma or specified via multiple flags.
-tls
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
-tlsCertFile string
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
-tlsKeyFile string
Path to file with TLS key. Used only if -tls is set
-version
Show VictoriaMetrics version
```
### List of command-line flags for vmselect
Below is the output for `/path/to/vmselect -help`:
```
-cacheDataPath string
Path to directory for cache files. Cache isn't saved if empty
-dedup.minScrapeInterval duration
Remove superflouos samples from time series if they are located closer to each other than this duration. This may be useful for reducing overhead when multiple identically configured Prometheus instances write data to the same VictoriaMetrics. Deduplication is disabled if the -dedup.minScrapeInterval is 0
-enableTCP6
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP and UDP is used
-envflag.enable
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set
-envflag.prefix string
Prefix for environment variables if -envflag.enable is set
-fs.disableMmap
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
-graphiteTrimTimestamp duration
Trim timestamps for Graphite data to this duration. Minimum practical duration is 1s. Higher duration (i.e. 1m) may be used for reducing disk space usage for timestamp data (default 1s)
-http.connTimeout duration
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
-http.disableResponseCompression
Disable compression of HTTP responses to save CPU resources. By default compression is enabled to save network bandwidth
-http.idleConnTimeout duration
Timeout for incoming idle http connections (default 1m0s)
-http.maxGracefulShutdownDuration duration
The maximum duration for a graceful shutdown of the HTTP server. A highly loaded server may require increased value for a graceful shutdown (default 7s)
-http.pathPrefix string
An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
-http.shutdownDelay duration
Optional delay before http server shutdown. During this delay, the server returns non-OK responses from /health page, so load balancers can route new requests to other servers
-httpListenAddr string
Address to listen for http connections (default ":8481")
-loggerDisableTimestamps
Whether to disable writing timestamps in logs
-loggerErrorsPerSecondLimit int
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
-loggerFormat string
Format for logs. Possible values: default, json (default "default")
-loggerLevel string
Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO")
-loggerOutput string
Output for the logs. Supported values: stderr, stdout (default "stderr")
-loggerTimezone string
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
-loggerWarnsPerSecondLimit int
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
-memory.allowedBytes size
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
-memory.allowedPercent float
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
-replicationFactor int
How many copies of every time series is available on vmstorage nodes. See -replicationFactor command-line flag for vminsert nodes (default 1)
-search.cacheTimestampOffset duration
The maximum duration since the current time for response data, which is always queried from the original raw data, without using the response cache. Increase this value if you see gaps in responses due to time synchronization issues between VictoriaMetrics and data sources (default 5m0s)
-search.denyPartialResponse
Whether to deny partial responses if a part of -storageNode instances fail to perform queries; this trades availability over consistency; see also -search.maxQueryDuration
-search.disableCache
Whether to disable response caching. This may be useful during data backfilling
-search.latencyOffset duration
The time when data points become visible in query results after the collection. Too small value can result in incomplete last points for query results (default 30s)
-search.logSlowQueryDuration duration
Log queries with execution time exceeding this value. Zero disables slow query logging (default 5s)
-search.maxConcurrentRequests int
The maximum number of concurrent search requests. It shouldn't be high, since a single request can saturate all the CPU cores. See also -search.maxQueueDuration (default 8)
-search.maxExportDuration duration
The maximum duration for /api/v1/export call (default 720h0m0s)
-search.maxLookback duration
Synonym to -search.lookback-delta from Prometheus. The value is dynamically detected from interval between time series datapoints if not set. It can be overridden on per-query basis via max_lookback arg. See also '-search.maxStalenessInterval' flag, which has the same meaining due to historical reasons
-search.maxPointsPerTimeseries int
The maximum points per a single timeseries returned from /api/v1/query_range. This option doesn't limit the number of scanned raw samples in the database. The main purpose of this option is to limit the number of per-series points returned to graphing UI such as Grafana. There is no sense in setting this limit to values bigger than the horizontal resolution of the graph (default 30000)
-search.maxQueryDuration duration
The maximum duration for query execution (default 30s)
-search.maxQueryLen size
The maximum search query length in bytes
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 16384)
-search.maxQueueDuration duration
The maximum time the request waits for execution when -search.maxConcurrentRequests limit is reached; see also -search.maxQueryDuration (default 10s)
-search.maxStalenessInterval duration
The maximum interval for staleness calculations. By default it is automatically calculated from the median interval between samples. This flag could be useful for tuning Prometheus data model closer to Influx-style data model. See https://prometheus.io/docs/prometheus/latest/querying/basics/#staleness for details. See also '-search.maxLookback' flag, which has the same meaning due to historical reasons
-search.maxStatusRequestDuration duration
The maximum duration for /api/v1/status/* requests (default 5m0s)
-search.maxStepForPointsAdjustment duration
The maximum step when /api/v1/query_range handler adjusts points with timestamps closer than -search.latencyOffset to the current time. The adjustment is needed because such points may contain incomplete data (default 1m0s)
-search.minStalenessInterval duration
The minimum interval for staleness calculations. This flag could be useful for removing gaps on graphs generated from time series with irregular intervals between samples. See also '-search.maxStalenessInterval'
-search.queryStats.lastQueriesCount int
Query stats for /api/v1/status/top_queries is tracked on this number of last queries. Zero value disables query stats tracking (default 20000)
-search.queryStats.minQueryDuration duration
The minimum duration for queries to track in query stats at /api/v1/status/top_queries. Queries with lower duration are ignored in query stats
-search.resetCacheAuthKey string
Optional authKey for resetting rollup cache via /internal/resetRollupResultCache call
-search.treatDotsAsIsInRegexps
Whether to treat dots as is in regexp label filters used in queries. For example, foo{bar=~"a.b.c"} will be automatically converted to foo{bar=~"a\\.b\\.c"}, i.e. all the dots in regexp filters will be automatically escaped in order to match only dot char instead of matching any char. Dots in ".+", ".*" and ".{n}" regexps aren't escaped. This option is DEPRECATED in favor of {__graphite__="a.*.c"} syntax for selecting metrics matching the given Graphite metrics filter
-selectNode array
Addresses of vmselect nodes; usage: -selectNode=vmselect-host1:8481 -selectNode=vmselect-host2:8481
Supports an array of values separated by comma or specified via multiple flags.
-storageNode array
Addresses of vmstorage nodes; usage: -storageNode=vmstorage-host1:8401 -storageNode=vmstorage-host2:8401
Supports an array of values separated by comma or specified via multiple flags.
-tls
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
-tlsCertFile string
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
-tlsKeyFile string
Path to file with TLS key. Used only if -tls is set
-version
Show VictoriaMetrics version
```
### List of command-line flags for vmstorage
Below is the output for `/path/to/vmstorage -help`:
```
-bigMergeConcurrency int
The maximum number of CPU cores to use for big merges. Default value is used if set to 0
-dedup.minScrapeInterval duration
Remove superflouos samples from time series if they are located closer to each other than this duration. This may be useful for reducing overhead when multiple identically configured Prometheus instances write data to the same VictoriaMetrics. Deduplication is disabled if the -dedup.minScrapeInterval is 0
-denyQueriesOutsideRetention
Whether to deny queries outside of the configured -retentionPeriod. When set, then /api/v1/query_range would return '503 Service Unavailable' error for queries with 'from' value outside -retentionPeriod. This may be useful when multiple data sources with distinct retentions are hidden behind query-tee
-enableTCP6
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP and UDP is used
-envflag.enable
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set
-envflag.prefix string
Prefix for environment variables if -envflag.enable is set
-finalMergeDelay duration
The delay before starting final merge for per-month partition after no new data is ingested into it. Final merge may require additional disk IO and CPU resources. Final merge may increase query speed and reduce disk space usage in some cases. Zero value disables final merge
-forceFlushAuthKey string
authKey, which must be passed in query string to /internal/force_flush pages
-forceMergeAuthKey string
authKey, which must be passed in query string to /internal/force_merge pages
-fs.disableMmap
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
-http.connTimeout duration
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
-http.disableResponseCompression
Disable compression of HTTP responses to save CPU resources. By default compression is enabled to save network bandwidth
-http.idleConnTimeout duration
Timeout for incoming idle http connections (default 1m0s)
-http.maxGracefulShutdownDuration duration
The maximum duration for a graceful shutdown of the HTTP server. A highly loaded server may require increased value for a graceful shutdown (default 7s)
-http.pathPrefix string
An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
-http.shutdownDelay duration
Optional delay before http server shutdown. During this delay, the server returns non-OK responses from /health page, so load balancers can route new requests to other servers
-httpListenAddr string
Address to listen for http connections (default ":8482")
-logNewSeries
Whether to log new series. This option is for debug purposes only. It can lead to performance issues when big number of new series are ingested into VictoriaMetrics
-loggerDisableTimestamps
Whether to disable writing timestamps in logs
-loggerErrorsPerSecondLimit int
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
-loggerFormat string
Format for logs. Possible values: default, json (default "default")
-loggerLevel string
Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO")
-loggerOutput string
Output for the logs. Supported values: stderr, stdout (default "stderr")
-loggerTimezone string
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
-loggerWarnsPerSecondLimit int
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
-memory.allowedBytes size
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
-memory.allowedPercent float
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
-precisionBits int
The number of precision bits to store per each value. Lower precision bits improves data compression at the cost of precision loss (default 64)
-retentionPeriod value
Data with timestamps outside the retentionPeriod is automatically deleted
The following optional suffixes are supported: h (hour), d (day), w (week), y (year). If suffix isn't set, then the duration is counted in months (default 1)
-rpc.disableCompression
Disable compression of RPC traffic. This reduces CPU usage at the cost of higher network bandwidth usage
-search.maxTagKeys int
The maximum number of tag keys returned per search (default 100000)
-search.maxTagValueSuffixesPerSearch int
The maximum number of tag value suffixes returned from /metrics/find (default 100000)
-search.maxTagValues int
The maximum number of tag values returned per search (default 100000)
-search.maxUniqueTimeseries int
The maximum number of unique time series each search can scan (default 300000)
-smallMergeConcurrency int
The maximum number of CPU cores to use for small merges. Default value is used if set to 0
-snapshotAuthKey string
authKey, which must be passed in query string to /snapshot* pages
-storage.maxDailySeries int
The maximum number of unique series can be added to the storage during the last 24 hours. Excess series are logged and dropped. This can be useful for limiting series churn rate. See also -storage.maxHourlySeries
-storage.maxHourlySeries int
The maximum number of unique series can be added to the storage during the last hour. Excess series are logged and dropped. This can be useful for limiting series cardinality. See also -storage.maxDailySeries
-storageDataPath string
Path to storage data (default "vmstorage-data")
-tls
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
-tlsCertFile string
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
-tlsKeyFile string
Path to file with TLS key. Used only if -tls is set
-version
Show VictoriaMetrics version
-vminsertAddr string
TCP address to accept connections from vminsert services (default ":8400")
-vmselectAddr string
TCP address to accept connections from vmselect services (default ":8401")
