`vmauth` is a simple auth proxy, router and [load balancer](#load-balancing) for [VictoriaMetrics](https://github.com/VictoriaMetrics/VictoriaMetrics).
It reads auth credentials from `Authorization` http header ([Basic Auth](https://en.wikipedia.org/wiki/Basic_access_authentication), `Bearer token` and [InfluxDB authorization](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1897) is supported),
matches them against configs pointed by [-auth.config](#auth-config) command-line flag and proxies incoming HTTP requests to the configured per-user `url_prefix` on successful match.
The auth config can be reloaded via the following ways:
- By passing `SIGHUP` signal to `vmauth`.
- By querying `/-/reload` http endpoint. This endpoint can be protected with `-reloadAuthKey` command-line flag. See [security docs](#security) for more details.
- By specifying `-configCheckInterval` command-line flag to the interval between config re-reads. For example, `-configCheckInterval=5s` will re-read the config
Feel free [contacting us](mailto:info@victoriametrics.com) if you need customized auth proxy for VictoriaMetrics with the support of LDAP, SSO, RBAC, SAML,
-`vmauth_unauthorized_user_concurrent_requests_capacity` - the limit on the number of concurrent requests for unauthorized users (if `unauthorized_user` section is used).
-`vmauth_unauthorized_user_concurrent_requests_current` - the current number of concurrent requests for unauthorized users (if `unauthorized_user` section is used).
-`vmauth_unauthorized_user_concurrent_requests_limit_reached_total` - the number of requests rejected with `429 Too Many Requests` error
because of the concurrency limit has been reached for unauthorized users (if `unauthorized_user` section is used).
[Enterprise version](https://docs.victoriametrics.com/enterprise.html) of `vmauth` can be configured to allow / deny incoming requests via global and per-user IP filters.
For example, the following config allows requests to `vmauth` from `10.0.0.0/24` network and from `1.2.3.4` IP address, while denying requests from `10.0.0.42` IP address:
It is expected that all the backend services protected by `vmauth` are located in an isolated private network, so they can be accessed by external users only via `vmauth`.
Do not transfer Basic Auth headers in plaintext over untrusted networks. Enable https. This can be done by passing the following `-tls*` command-line flags to `vmauth`:
`vmauth` also supports the ability to restict access by IP - see [these docs](#ip-filters). See also [concurrency limiting docs](#concurrency-limiting).
`vmauth` exports various metrics in Prometheus exposition format at `http://vmauth-host:8427/metrics` page. It is recommended setting up regular scraping of this page
`vmauth` exports `vmauth_user_requests_total` metric with `username` label. The `username` label value equals to `username` field value set in the `-auth.config` file. It is possible to override or hide the value in the label by specifying `name` field. For example, the following config will result in `vmauth_user_requests_total{username="foobar"}` instead of `vmauth_user_requests_total{username="secret_user"}`:
For unauthorized users `vmauth` exports `vmauth_unauthorized_user_requests_total` metric without label (if `unauthorized_user` section of config is used).
It is recommended using [binary releases](https://github.com/VictoriaMetrics/VictoriaMetrics/releases) - `vmauth` is located in `vmutils-*` archives there.
by setting it via `<ROOT_IMAGE>` environment variable. For example, the following command builds the image on top of [scratch](https://hub.docker.com/_/scratch) image:
Path to auth config. It can point either to local file or to http url. See https://docs.victoriametrics.com/vmauth.html for details on the format of this auth config
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/assets/VM_EULA.pdf . This flag is available only in VictoriaMetrics enterprise. See https://docs.victoriametrics.com/enterprise.html
Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
The maximum duration for a graceful shutdown of the HTTP server. A highly loaded server may require increased value for a graceful shutdown (default 7s)
An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
Optional delay before http server shutdown. During this delay, the server returns non-OK responses from /health page, so load balancers can route new requests to other servers
The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning (default 500)
Whether to log requests with invalid auth tokens. Such requests are always counted at vmauth_http_request_errors_total{reason="invalid_auth_token"} metric, which is exposed at /metrics page
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
The maximum number of concurrent requests vmauth can process per each configured user. Other requests are rejected with '429 Too Many Requests' http status code. See also -maxConcurrentRequests command-line option and max_concurrent_requests option in per-user config (default 300)
The maximum number of concurrent requests vmauth can process. Other requests are rejected with '429 Too Many Requests' http status code. See also -maxConcurrentPerUserRequests and -maxIdleConnsPerBackend command-line options (default 1000)
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabel='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
Supports an array of values separated by comma or specified via multiple flags.
-pushmetrics.interval duration
Interval for pushing metrics to -pushmetrics.url (default 10s)
-pushmetrics.url array
Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
Supports an array of values separated by comma or specified via multiple flags.
Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
