docs: update docs after ae8a867924

Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1470

README.md

@@ -2633,7 +2633,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -graphiteTrimTimestamp duration
      Trim timestamps for Graphite data to this duration. Minimum practical duration is 1s. Higher duration (i.e. 1m) may be used for reducing disk space usage for timestamp data (default 1s)
   -http.connTimeout duration
-     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
+     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem
   -http.disableResponseCompression
      Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth
   -http.header.csp default-src 'self'
@@ -2655,10 +2655,14 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
      Flag value can be read from the given file when using -httpAuth.password=file:///abs/path/to/file or -httpAuth.password=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -httpAuth.password=http://host/path or -httpAuth.password=https://host/path
   -httpAuth.username string
      Username for HTTP server's Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
-  -httpListenAddr string
-     TCP address to listen for http connections. See also -tls and -httpListenAddr.useProxyProtocol (default ":8428")
-  -httpListenAddr.useProxyProtocol
-     Whether to use proxy protocol for connections accepted at -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+  -httpListenAddr array
+     TCP addresses to listen for incoming http requests. See also -tls and -httpListenAddr.useProxyProtocol
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -httpListenAddr.useProxyProtocol array
+     Whether to use proxy protocol for connections accepted at the corresponding -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -import.maxLineLen size
      The maximum length in bytes of a single line accepted by /api/v1/import; the line length can be limited with 'max_rows_per_line' query arg passed to /api/v1/export
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 10485760)
@@ -2738,10 +2742,14 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -metricsAuthKey value
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path
-  -mtls
-     Whether to require valid client certificate for https requests to -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
-  -mtlsCAFile string
-     Optional path to TLS Root CA for verifying client certificates when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+  -mtls array
+     Whether to require valid client certificate for https requests to the corresponding -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -mtlsCAFile array
+     Optional path to TLS Root CA for verifying client certificates at the corresponding -httpListenAddr when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -newrelic.maxInsertRequestSize size
      The maximum size in bytes of a single NewRelic request to /newrelic/infra/v2/metrics/events/bulk
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 67108864)
@@ -3036,18 +3044,26 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
      Whether to drop all the input samples after the aggregation with -streamAggr.config. By default, only aggregated samples are dropped, while the remaining samples are stored in the database. See also -streamAggr.keepInput and https://docs.victoriametrics.com/stream-aggregation.html
   -streamAggr.keepInput
      Whether to keep all the input samples after the aggregation with -streamAggr.config. By default, only aggregated samples are dropped, while the remaining samples are stored in the database. See also -streamAggr.dropInput and https://docs.victoriametrics.com/stream-aggregation.html
-  -tls
-     Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
-  -tlsCertFile string
-     Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+  -tls array
+     Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -tlsCertFile array
+     Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -tlsCipherSuites array
      Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
      Supports an array of values separated by comma or specified via multiple flags.
      Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
-  -tlsKeyFile string
-     Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
-  -tlsMinVersion string
-     Optional minimum TLS version to use for incoming requests over HTTPS if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+  -tlsKeyFile array
+     Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -tlsMinVersion array
+     Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -usePromCompatibleNaming
      Whether to replace characters unsupported by Prometheus with underscores in the ingested metric names and label names. For example, foo.bar{a.b='c'} is transformed into foo_bar{a_b='c'} during data ingestion if this flag is set. See https://prometheus.io/docs/concepts/data_model/#metric-names-and-labels
   -version

docs/Cluster-VictoriaMetrics.md

@@ -1026,7 +1026,7 @@ Below is the output for `/path/to/vminsert -help`:
   -graphiteTrimTimestamp duration
      Trim timestamps for Graphite data to this duration. Minimum practical duration is 1s. Higher duration (i.e. 1m) may be used for reducing disk space usage for timestamp data (default 1s)
   -http.connTimeout duration
-     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
+     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem
   -http.disableResponseCompression
      Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth
   -http.header.csp default-src 'self'
@@ -1048,10 +1048,14 @@ Below is the output for `/path/to/vminsert -help`:
      Flag value can be read from the given file when using -httpAuth.password=file:///abs/path/to/file or -httpAuth.password=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -httpAuth.password=http://host/path or -httpAuth.password=https://host/path
   -httpAuth.username string
      Username for HTTP server's Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
-  -httpListenAddr string
-     Address to listen for http connections. See also -httpListenAddr.useProxyProtocol (default ":8480")
-  -httpListenAddr.useProxyProtocol
-     Whether to use proxy protocol for connections accepted at -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+  -httpListenAddr array
+     Address to listen for incoming http requests. See also -httpListenAddr.useProxyProtocol
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -httpListenAddr.useProxyProtocol array
+     Whether to use proxy protocol for connections accepted at the given -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -import.maxLineLen size
      The maximum length in bytes of a single line accepted by /api/v1/import; the line length can be limited with 'max_rows_per_line' query arg passed to /api/v1/export
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 10485760)
@@ -1127,10 +1131,14 @@ Below is the output for `/path/to/vminsert -help`:
   -metricsAuthKey value
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path
-  -mtls
-     Whether to require valid client certificate for https requests to -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
-  -mtlsCAFile string
-     Optional path to TLS Root CA for verifying client certificates when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+  -mtls array
+     Whether to require valid client certificate for https requests to the corresponding -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -mtlsCAFile array
+     Optional path to TLS Root CA for verifying client certificates at the corresponding -httpListenAddr when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -newrelic.maxInsertRequestSize size
      The maximum size in bytes of a single NewRelic request to /newrelic/infra/v2/metrics/events/bulk
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 67108864)
@@ -1186,18 +1194,26 @@ Below is the output for `/path/to/vminsert -help`:
      Interval for refreshing -storageNode list behind dns+srv records. The minimum supported interval is 1s. See https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#automatic-vmstorage-discovery . This flag is available only in VictoriaMetrics enterprise. See https://docs.victoriametrics.com/enterprise.html (default 2s)
   -storageNode.filter string
      An optional regexp filter for discovered -storageNode addresses according to https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#automatic-vmstorage-discovery. Discovered addresses matching the filter are retained, while other addresses are ignored. This flag is available only in VictoriaMetrics enterprise. See https://docs.victoriametrics.com/enterprise.html
-  -tls
-     Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
-  -tlsCertFile string
-     Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+  -tls array
+     Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -tlsCertFile array
+     Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -tlsCipherSuites array
      Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
      Supports an array of values separated by comma or specified via multiple flags.
      Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
-  -tlsKeyFile string
-     Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
-  -tlsMinVersion string
-     Optional minimum TLS version to use for incoming requests over HTTPS if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+  -tlsKeyFile array
+     Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -tlsMinVersion array
+     Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -usePromCompatibleNaming
      Whether to replace characters unsupported by Prometheus with underscores in the ingested metric names and label names. For example, foo.bar{a.b='c'} is transformed into foo_bar{a_b='c'} during data ingestion if this flag is set. See https://prometheus.io/docs/concepts/data_model/#metric-names-and-labels
   -version
@@ -1284,7 +1300,7 @@ Below is the output for `/path/to/vmselect -help`:
   -fs.disableMmap
      Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
   -http.connTimeout duration
-     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
+     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem
   -http.disableResponseCompression
      Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth
   -http.header.csp default-src 'self'
@@ -1306,10 +1322,14 @@ Below is the output for `/path/to/vmselect -help`:
      Flag value can be read from the given file when using -httpAuth.password=file:///abs/path/to/file or -httpAuth.password=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -httpAuth.password=http://host/path or -httpAuth.password=https://host/path
   -httpAuth.username string
      Username for HTTP server's Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
-  -httpListenAddr string
-     Address to listen for http connections. See also -httpListenAddr.useProxyProtocol (default ":8481")
-  -httpListenAddr.useProxyProtocol
-     Whether to use proxy protocol for connections accepted at -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+  -httpListenAddr array
+     Address to listen for incoming http requests. See also -httpListenAddr.useProxyProtocol
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -httpListenAddr.useProxyProtocol array
+     Whether to use proxy protocol for connections accepted at the given -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -internStringCacheExpireDuration duration
      The expiry duration for caches for interned strings. See https://en.wikipedia.org/wiki/String_interning . See also -internStringMaxLen and -internStringDisableCache (default 6m0s)
   -internStringDisableCache
@@ -1350,10 +1370,14 @@ Below is the output for `/path/to/vmselect -help`:
   -metricsAuthKey value
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path
-  -mtls
-     Whether to require valid client certificate for https requests to -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
-  -mtlsCAFile string
-     Optional path to TLS Root CA for verifying client certificates when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+  -mtls array
+     Whether to require valid client certificate for https requests to the corresponding -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -mtlsCAFile array
+     Optional path to TLS Root CA for verifying client certificates at the corresponding -httpListenAddr when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -pprofAuthKey value
      Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -pprofAuthKey=file:///abs/path/to/file or -pprofAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -pprofAuthKey=http://host/path or -pprofAuthKey=https://host/path
@@ -1483,18 +1507,26 @@ Below is the output for `/path/to/vmselect -help`:
      Interval for refreshing -storageNode list behind dns+srv records. The minimum supported interval is 1s. See https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#automatic-vmstorage-discovery . This flag is available only in VictoriaMetrics enterprise. See https://docs.victoriametrics.com/enterprise.html (default 2s)
   -storageNode.filter string
      An optional regexp filter for discovered -storageNode addresses according to https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#automatic-vmstorage-discovery. Discovered addresses matching the filter are retained, while other addresses are ignored. This flag is available only in VictoriaMetrics enterprise. See https://docs.victoriametrics.com/enterprise.html
-  -tls
-     Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
-  -tlsCertFile string
-     Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+  -tls array
+     Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -tlsCertFile array
+     Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -tlsCipherSuites array
      Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
      Supports an array of values separated by comma or specified via multiple flags.
      Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
-  -tlsKeyFile string
-     Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
-  -tlsMinVersion string
-     Optional minimum TLS version to use for incoming requests over HTTPS if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+  -tlsKeyFile array
+     Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -tlsMinVersion array
+     Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -version
      Show VictoriaMetrics version
   -vmalert.proxyURL string
@@ -1568,7 +1600,7 @@ Below is the output for `/path/to/vmstorage -help`:
   -fs.disableMmap
      Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
   -http.connTimeout duration
-     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
+     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem
   -http.disableResponseCompression
      Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth
   -http.header.csp default-src 'self'
@@ -1590,10 +1622,14 @@ Below is the output for `/path/to/vmstorage -help`:
      Flag value can be read from the given file when using -httpAuth.password=file:///abs/path/to/file or -httpAuth.password=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -httpAuth.password=http://host/path or -httpAuth.password=https://host/path
   -httpAuth.username string
      Username for HTTP server's Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
-  -httpListenAddr string
-     Address to listen for http connections. See also -httpListenAddr.useProxyProtocol (default ":8482")
-  -httpListenAddr.useProxyProtocol
-     Whether to use proxy protocol for connections accepted at -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+  -httpListenAddr array
+     Address to listen for incoming http requests. See also -httpListenAddr.useProxyProtocol
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -httpListenAddr.useProxyProtocol array
+     Whether to use proxy protocol for connections accepted at the given -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -inmemoryDataFlushInterval duration
      The interval for guaranteed saving of in-memory data to disk. The saved data survives unclean shutdowns such as OOM crash, hardware reset, SIGKILL, etc. Bigger intervals may help increase the lifetime of flash storage with limited write cycles (e.g. Raspberry PI). Smaller intervals increase disk IO load. Minimum supported value is 1s (default 5s)
   -insert.maxQueueDuration duration
@@ -1642,10 +1678,14 @@ Below is the output for `/path/to/vmstorage -help`:
   -metricsAuthKey value
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path
-  -mtls
-     Whether to require valid client certificate for https requests to -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
-  -mtlsCAFile string
-     Optional path to TLS Root CA for verifying client certificates when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+  -mtls array
+     Whether to require valid client certificate for https requests to the corresponding -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -mtlsCAFile array
+     Optional path to TLS Root CA for verifying client certificates at the corresponding -httpListenAddr when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -pprofAuthKey value
      Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -pprofAuthKey=file:///abs/path/to/file or -pprofAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -pprofAuthKey=http://host/path or -pprofAuthKey=https://host/path
@@ -1725,18 +1765,26 @@ Below is the output for `/path/to/vmstorage -help`:
      The time needed for gradual closing of vminsert connections during graceful shutdown. Bigger duration reduces spikes in CPU, RAM and disk IO load on the remaining vmstorage nodes during rolling restart. Smaller duration reduces the time needed to close all the vminsert connections, thus reducing the time for graceful shutdown. See https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#improving-re-routing-performance-during-restart (default 25s)
   -storageDataPath string
      Path to storage data (default "vmstorage-data")
-  -tls
-     Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
-  -tlsCertFile string
-     Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+  -tls array
+     Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -tlsCertFile array
+     Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -tlsCipherSuites array
      Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
      Supports an array of values separated by comma or specified via multiple flags.
      Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
-  -tlsKeyFile string
-     Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
-  -tlsMinVersion string
-     Optional minimum TLS version to use for incoming requests over HTTPS if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+  -tlsKeyFile array
+     Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -tlsMinVersion array
+     Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -version
      Show VictoriaMetrics version
   -vminsertAddr string

docs/README.md

@@ -2636,7 +2636,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -graphiteTrimTimestamp duration
      Trim timestamps for Graphite data to this duration. Minimum practical duration is 1s. Higher duration (i.e. 1m) may be used for reducing disk space usage for timestamp data (default 1s)
   -http.connTimeout duration
-     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
+     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem
   -http.disableResponseCompression
      Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth
   -http.header.csp default-src 'self'
@@ -2658,10 +2658,14 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
      Flag value can be read from the given file when using -httpAuth.password=file:///abs/path/to/file or -httpAuth.password=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -httpAuth.password=http://host/path or -httpAuth.password=https://host/path
   -httpAuth.username string
      Username for HTTP server's Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
-  -httpListenAddr string
-     TCP address to listen for http connections. See also -tls and -httpListenAddr.useProxyProtocol (default ":8428")
-  -httpListenAddr.useProxyProtocol
-     Whether to use proxy protocol for connections accepted at -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+  -httpListenAddr array
+     TCP addresses to listen for incoming http requests. See also -tls and -httpListenAddr.useProxyProtocol
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -httpListenAddr.useProxyProtocol array
+     Whether to use proxy protocol for connections accepted at the corresponding -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -import.maxLineLen size
      The maximum length in bytes of a single line accepted by /api/v1/import; the line length can be limited with 'max_rows_per_line' query arg passed to /api/v1/export
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 10485760)
@@ -2741,10 +2745,14 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -metricsAuthKey value
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path
-  -mtls
-     Whether to require valid client certificate for https requests to -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
-  -mtlsCAFile string
-     Optional path to TLS Root CA for verifying client certificates when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+  -mtls array
+     Whether to require valid client certificate for https requests to the corresponding -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -mtlsCAFile array
+     Optional path to TLS Root CA for verifying client certificates at the corresponding -httpListenAddr when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -newrelic.maxInsertRequestSize size
      The maximum size in bytes of a single NewRelic request to /newrelic/infra/v2/metrics/events/bulk
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 67108864)
@@ -3039,18 +3047,26 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
      Whether to drop all the input samples after the aggregation with -streamAggr.config. By default, only aggregated samples are dropped, while the remaining samples are stored in the database. See also -streamAggr.keepInput and https://docs.victoriametrics.com/stream-aggregation.html
   -streamAggr.keepInput
      Whether to keep all the input samples after the aggregation with -streamAggr.config. By default, only aggregated samples are dropped, while the remaining samples are stored in the database. See also -streamAggr.dropInput and https://docs.victoriametrics.com/stream-aggregation.html
-  -tls
-     Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
-  -tlsCertFile string
-     Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+  -tls array
+     Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -tlsCertFile array
+     Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -tlsCipherSuites array
      Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
      Supports an array of values separated by comma or specified via multiple flags.
      Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
-  -tlsKeyFile string
-     Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
-  -tlsMinVersion string
-     Optional minimum TLS version to use for incoming requests over HTTPS if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+  -tlsKeyFile array
+     Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -tlsMinVersion array
+     Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -usePromCompatibleNaming
      Whether to replace characters unsupported by Prometheus with underscores in the ingested metric names and label names. For example, foo.bar{a.b='c'} is transformed into foo_bar{a_b='c'} during data ingestion if this flag is set. See https://prometheus.io/docs/concepts/data_model/#metric-names-and-labels
   -version

docs/Single-server-VictoriaMetrics.md

@@ -2644,7 +2644,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -graphiteTrimTimestamp duration
      Trim timestamps for Graphite data to this duration. Minimum practical duration is 1s. Higher duration (i.e. 1m) may be used for reducing disk space usage for timestamp data (default 1s)
   -http.connTimeout duration
-     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
+     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem
   -http.disableResponseCompression
      Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth
   -http.header.csp default-src 'self'
@@ -2666,10 +2666,14 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
      Flag value can be read from the given file when using -httpAuth.password=file:///abs/path/to/file or -httpAuth.password=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -httpAuth.password=http://host/path or -httpAuth.password=https://host/path
   -httpAuth.username string
      Username for HTTP server's Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
-  -httpListenAddr string
-     TCP address to listen for http connections. See also -tls and -httpListenAddr.useProxyProtocol (default ":8428")
-  -httpListenAddr.useProxyProtocol
-     Whether to use proxy protocol for connections accepted at -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+  -httpListenAddr array
+     TCP addresses to listen for incoming http requests. See also -tls and -httpListenAddr.useProxyProtocol
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -httpListenAddr.useProxyProtocol array
+     Whether to use proxy protocol for connections accepted at the corresponding -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -import.maxLineLen size
      The maximum length in bytes of a single line accepted by /api/v1/import; the line length can be limited with 'max_rows_per_line' query arg passed to /api/v1/export
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 10485760)
@@ -2749,10 +2753,14 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -metricsAuthKey value
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path
-  -mtls
-     Whether to require valid client certificate for https requests to -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
-  -mtlsCAFile string
-     Optional path to TLS Root CA for verifying client certificates when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+  -mtls array
+     Whether to require valid client certificate for https requests to the corresponding -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -mtlsCAFile array
+     Optional path to TLS Root CA for verifying client certificates at the corresponding -httpListenAddr when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -newrelic.maxInsertRequestSize size
      The maximum size in bytes of a single NewRelic request to /newrelic/infra/v2/metrics/events/bulk
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 67108864)
@@ -3047,18 +3055,26 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
      Whether to drop all the input samples after the aggregation with -streamAggr.config. By default, only aggregated samples are dropped, while the remaining samples are stored in the database. See also -streamAggr.keepInput and https://docs.victoriametrics.com/stream-aggregation.html
   -streamAggr.keepInput
      Whether to keep all the input samples after the aggregation with -streamAggr.config. By default, only aggregated samples are dropped, while the remaining samples are stored in the database. See also -streamAggr.dropInput and https://docs.victoriametrics.com/stream-aggregation.html
-  -tls
-     Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
-  -tlsCertFile string
-     Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+  -tls array
+     Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -tlsCertFile array
+     Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -tlsCipherSuites array
      Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
      Supports an array of values separated by comma or specified via multiple flags.
      Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
-  -tlsKeyFile string
-     Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
-  -tlsMinVersion string
-     Optional minimum TLS version to use for incoming requests over HTTPS if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+  -tlsKeyFile array
+     Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -tlsMinVersion array
+     Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -usePromCompatibleNaming
      Whether to replace characters unsupported by Prometheus with underscores in the ingested metric names and label names. For example, foo.bar{a.b='c'} is transformed into foo_bar{a_b='c'} during data ingestion if this flag is set. See https://prometheus.io/docs/concepts/data_model/#metric-names-and-labels
   -version

docs/vmagent.md

@@ -1643,9 +1643,11 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -gcp.pubsub.subscribe.topicSubscription.concurrency array
      The number of concurrently processed messages for topic subscription specified via -gcp.pubsub.subscribe.topicSubscription flag. See https://docs.victoriametrics.com/vmagent.html#reading-metrics-from-pubsub . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html (default 0)
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to default value.
   -gcp.pubsub.subscribe.topicSubscription.isGzipped array
      Enables gzip decompression for messages payload at the corresponding -gcp.pubsub.subscribe.topicSubscription. Only prometheus, jsonline, graphite and influx formats accept gzipped messages. See https://docs.victoriametrics.com/vmagent.html#reading-metrics-from-pubsub . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -gcp.pubsub.subscribe.topicSubscription.messageFormat array
      Message format for the corresponding -gcp.pbusub.subcribe.topicSubscription. Valid formats: influx, prometheus, promremotewrite, graphite, jsonline . See https://docs.victoriametrics.com/vmagent.html#reading-metrics-from-pubsub . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
      Supports an array of values separated by comma or specified via multiple flags.
@@ -1657,7 +1659,7 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -graphiteTrimTimestamp duration
      Trim timestamps for Graphite data to this duration. Minimum practical duration is 1s. Higher duration (i.e. 1m) may be used for reducing disk space usage for timestamp data (default 1s)
   -http.connTimeout duration
-     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
+     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem
   -http.disableResponseCompression
      Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth
   -http.header.csp default-src 'self'
@@ -1679,10 +1681,14 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
      Flag value can be read from the given file when using -httpAuth.password=file:///abs/path/to/file or -httpAuth.password=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -httpAuth.password=http://host/path or -httpAuth.password=https://host/path
   -httpAuth.username string
      Username for HTTP server's Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
-  -httpListenAddr string
-     TCP address to listen for http connections. Set this flag to empty value in order to disable listening on any port. This mode may be useful for running multiple vmagent instances on the same server. Note that /targets and /metrics pages aren't available if -httpListenAddr=''. See also -tls and -httpListenAddr.useProxyProtocol (default ":8429")
-  -httpListenAddr.useProxyProtocol
-     Whether to use proxy protocol for connections accepted at -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+  -httpListenAddr array
+     TCP address to listen for incoming http requests. Set this flag to empty value in order to disable listening on any port. This mode may be useful for running multiple vmagent instances on the same server. Note that /targets and /metrics pages aren't available if -httpListenAddr=''. See also -tls and -httpListenAddr.useProxyProtocol
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -httpListenAddr.useProxyProtocol array
+     Whether to use proxy protocol for connections accepted at the corresponding -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -import.maxLineLen size
      The maximum length in bytes of a single line accepted by /api/v1/import; the line length can be limited with 'max_rows_per_line' query arg passed to /api/v1/export
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 10485760)
@@ -1734,6 +1740,7 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -kafka.consumer.topic.concurrency array
      Configures consumer concurrency for topic specified via -kafka.consumer.topic flag. See https://docs.victoriametrics.com/vmagent.html#reading-metrics-from-kafka . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html (default 1)
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to default value.
   -kafka.consumer.topic.defaultFormat string
      Expected data format in the topic if -kafka.consumer.topic.format is skipped. See https://docs.victoriametrics.com/vmagent.html#reading-metrics-from-kafka . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html (default "promremotewrite")
   -kafka.consumer.topic.format array
@@ -1747,6 +1754,7 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -kafka.consumer.topic.isGzipped array
      Enables gzip setting for topic messages payload. Only prometheus, jsonline, graphite and influx formats accept gzipped messages.See https://docs.victoriametrics.com/vmagent.html#reading-metrics-from-kafka . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -kafka.consumer.topic.options array
      Optional key=value;key1=value2 settings for topic consumer. See full configuration options at https://github.com/edenhill/librdkafka/blob/master/CONFIGURATION.md . See https://docs.victoriametrics.com/vmagent.html#reading-metrics-from-kafka . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
      Supports an array of values separated by comma or specified via multiple flags.
@@ -1790,10 +1798,14 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -metricsAuthKey value
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path
-  -mtls
-     Whether to require valid client certificate for https requests to -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
-  -mtlsCAFile string
-     Optional path to TLS Root CA for verifying client certificates when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+  -mtls array
+     Whether to require valid client certificate for https requests to the corresponding -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -mtlsCAFile array
+     Optional path to TLS Root CA for verifying client certificates at the corresponding -httpListenAddr when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -newrelic.maxInsertRequestSize size
      The maximum size in bytes of a single NewRelic request to /newrelic/infra/v2/metrics/events/bulk
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 67108864)
@@ -1964,6 +1976,7 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -remoteWrite.aws.useSigv4 array
      Enables SigV4 request signing for the corresponding -remoteWrite.url. It is expected that other -remoteWrite.aws.* command-line flags are set if sigv4 request signing is enabled
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -remoteWrite.basicAuth.password array
      Optional basic auth password to use for the corresponding -remoteWrite.url
      Supports an array of values separated by comma or specified via multiple flags.
@@ -1993,9 +2006,11 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -remoteWrite.forcePromProto array
      Whether to force Prometheus remote write protocol for sending data to the corresponding -remoteWrite.url . See https://docs.victoriametrics.com/vmagent.html#victoriametrics-remote-write-protocol
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -remoteWrite.forceVMProto array
      Whether to force VictoriaMetrics remote write protocol for sending data to the corresponding -remoteWrite.url . See https://docs.victoriametrics.com/vmagent.html#victoriametrics-remote-write-protocol
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -remoteWrite.headers array
      Optional HTTP headers to send with each request to the corresponding -remoteWrite.url. For example, -remoteWrite.headers='My-Auth:foobar' would send 'My-Auth: foobar' HTTP header with every request to the corresponding -remoteWrite.url. Multiple headers must be delimited by '^^': -remoteWrite.headers='header1:value1^^header2:value2'
      Supports an array of values separated by comma or specified via multiple flags.
@@ -2015,6 +2030,7 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
      The maximum file-based buffer size in bytes at -remoteWrite.tmpDataPath for each -remoteWrite.url. When buffer size reaches the configured maximum, then old data is dropped when adding new data to the buffer. Buffered data is stored in ~500MB chunks. It is recommended to set the value for this flag to a multiple of the block size 500MB. Disk usage is unlimited if the value is set to 0
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB. (default 0)
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to default value.
   -remoteWrite.maxHourlySeries int
      The maximum number of unique series vmagent can send to remote storage systems during the last hour. Excess series are logged and dropped. This can be useful for limiting series cardinality. See https://docs.victoriametrics.com/vmagent.html#cardinality-limiter
   -remoteWrite.maxRowsPerBlock int
@@ -2056,14 +2072,17 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -remoteWrite.rateLimit array
      Optional rate limit in bytes per second for data sent to the corresponding -remoteWrite.url. By default, the rate limit is disabled. It can be useful for limiting load on remote storage when big amounts of buffered data is sent after temporary unavailability of the remote storage (default 0)
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to default value.
   -remoteWrite.relabelConfig string
      Optional path to file with relabeling configs, which are applied to all the metrics before sending them to -remoteWrite.url. See also -remoteWrite.urlRelabelConfig. The path can point either to local file or to http url. See https://docs.victoriametrics.com/vmagent.html#relabeling
   -remoteWrite.roundDigits array
      Round metric values to this number of decimal digits after the point before writing them to remote storage. Examples: -remoteWrite.roundDigits=2 would round 1.236 to 1.24, while -remoteWrite.roundDigits=-1 would round 126.78 to 130. By default, digits rounding is disabled. Set it to 100 for disabling it for a particular remote storage. This option may be used for improving data compression for the stored metrics (default 100)
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to default value.
   -remoteWrite.sendTimeout array
      Timeout for sending a single block of data to the corresponding -remoteWrite.url (default 1m0s)
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to default value.
   -remoteWrite.shardByURL
      Whether to shard outgoing series across all the remote storage systems enumerated via -remoteWrite.url . By default the data is replicated across all the -remoteWrite.url . See https://docs.victoriametrics.com/vmagent.html#sharding-among-remote-storages
   -remoteWrite.shardByURL.labels array
@@ -2075,6 +2094,7 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -remoteWrite.significantFigures array
      The number of significant figures to leave in metric values before writing them to remote storage. See https://en.wikipedia.org/wiki/Significant_figures . Zero value saves all the significant figures. This option may be used for improving data compression for the stored metrics. See also -remoteWrite.roundDigits (default 0)
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to default value.
   -remoteWrite.streamAggr.config array
      Optional path to file with stream aggregation config. See https://docs.victoriametrics.com/stream-aggregation.html . See also -remoteWrite.streamAggr.keepInput, -remoteWrite.streamAggr.dropInput and -remoteWrite.streamAggr.dedupInterval
      Supports an array of values separated by comma or specified via multiple flags.
@@ -2082,12 +2102,15 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -remoteWrite.streamAggr.dedupInterval array
      Input samples are de-duplicated with this interval before being aggregated. Only the last sample per each time series per each interval is aggregated if the interval is greater than zero (default 0s)
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to default value.
   -remoteWrite.streamAggr.dropInput array
      Whether to drop all the input samples after the aggregation with -remoteWrite.streamAggr.config. By default, only aggregates samples are dropped, while the remaining samples are written to the corresponding -remoteWrite.url . See also -remoteWrite.streamAggr.keepInput and https://docs.victoriametrics.com/stream-aggregation.html
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -remoteWrite.streamAggr.keepInput array
      Whether to keep all the input samples after the aggregation with -remoteWrite.streamAggr.config. By default, only aggregates samples are dropped, while the remaining samples are written to the corresponding -remoteWrite.url . See also -remoteWrite.streamAggr.dropInput and https://docs.victoriametrics.com/stream-aggregation.html
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -remoteWrite.tlsCAFile array
      Optional path to TLS CA file to use for verifying connections to the corresponding -remoteWrite.url. By default, system CA is used
      Supports an array of values separated by comma or specified via multiple flags.
@@ -2099,6 +2122,7 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -remoteWrite.tlsInsecureSkipVerify array
      Whether to skip tls verification when connecting to the corresponding -remoteWrite.url
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -remoteWrite.tlsKeyFile array
      Optional path to client-side TLS certificate key to use when connecting to the corresponding -remoteWrite.url
      Supports an array of values separated by comma or specified via multiple flags.
@@ -2121,18 +2145,26 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
      The compression level for VictoriaMetrics remote write protocol. Higher values reduce network traffic at the cost of higher CPU usage. Negative values reduce CPU usage at the cost of increased network traffic. See https://docs.victoriametrics.com/vmagent.html#victoriametrics-remote-write-protocol
   -sortLabels
      Whether to sort labels for incoming samples before writing them to all the configured remote storage systems. This may be needed for reducing memory usage at remote storage when the order of labels in incoming samples is random. For example, if m{k1="v1",k2="v2"} may be sent as m{k2="v2",k1="v1"}Enabled sorting for labels can slow down ingestion performance a bit
-  -tls
-     Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
-  -tlsCertFile string
-     Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+  -tls array
+     Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -tlsCertFile array
+     Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -tlsCipherSuites array
      Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
      Supports an array of values separated by comma or specified via multiple flags.
      Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
-  -tlsKeyFile string
-     Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
-  -tlsMinVersion string
-     Optional minimum TLS version to use for incoming requests over HTTPS if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+  -tlsKeyFile array
+     Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -tlsMinVersion array
+     Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -usePromCompatibleNaming
      Whether to replace characters unsupported by Prometheus with underscores in the ingested metric names and label names. For example, foo.bar{a.b='c'} is transformed into foo_bar{a_b='c'} during data ingestion if this flag is set. See https://prometheus.io/docs/concepts/data_model/#metric-names-and-labels
   -version

docs/vmalert.md

@@ -1058,7 +1058,7 @@ The shortlist of configuration flags is the following:
   -fs.disableMmap
      Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
   -http.connTimeout duration
-     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
+     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem
   -http.disableResponseCompression
      Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth
   -http.header.csp default-src 'self'
@@ -1080,10 +1080,14 @@ The shortlist of configuration flags is the following:
      Flag value can be read from the given file when using -httpAuth.password=file:///abs/path/to/file or -httpAuth.password=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -httpAuth.password=http://host/path or -httpAuth.password=https://host/path
   -httpAuth.username string
      Username for HTTP server's Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
-  -httpListenAddr string
-     Address to listen for http connections. See also -tls and -httpListenAddr.useProxyProtocol (default ":8880")
-  -httpListenAddr.useProxyProtocol
-     Whether to use proxy protocol for connections accepted at -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+  -httpListenAddr array
+     Address to listen for incoming http requests. See also -tls and -httpListenAddr.useProxyProtocol
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -httpListenAddr.useProxyProtocol array
+     Whether to use proxy protocol for connections accepted at the corresponding -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -internStringCacheExpireDuration duration
      The expiry duration for caches for interned strings. See https://en.wikipedia.org/wiki/String_interning . See also -internStringMaxLen and -internStringDisableCache (default 6m0s)
   -internStringDisableCache
@@ -1124,10 +1128,14 @@ The shortlist of configuration flags is the following:
   -metricsAuthKey value
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path
-  -mtls
-     Whether to require valid client certificate for https requests to -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
-  -mtlsCAFile string
-     Optional path to TLS Root CA for verifying client certificates when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+  -mtls array
+     Whether to require valid client certificate for https requests to the corresponding -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -mtlsCAFile array
+     Optional path to TLS Root CA for verifying client certificates at the corresponding -httpListenAddr when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -notifier.basicAuth.password array
      Optional basic auth password for -notifier.url
      Supports an array of values separated by comma or specified via multiple flags.
@@ -1191,6 +1199,7 @@ The shortlist of configuration flags is the following:
   -notifier.tlsInsecureSkipVerify array
      Whether to skip tls verification when connecting to -notifier.url
      Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -notifier.tlsKeyFile array
      Optional path to client-side TLS certificate key to use when connecting to -notifier.url
      Supports an array of values separated by comma or specified via multiple flags.
@@ -1399,18 +1408,26 @@ The shortlist of configuration flags is the following:
      Custom S3 endpoint for use with S3-compatible storages (e.g. MinIO). S3 is used if not set. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
   -s3.forcePathStyle
      Prefixing endpoint with bucket name when set false, true by default. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html (default true)
-  -tls
-     Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
-  -tlsCertFile string
-     Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+  -tls array
+     Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -tlsCertFile array
+     Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -tlsCipherSuites array
      Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
      Supports an array of values separated by comma or specified via multiple flags.
      Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
-  -tlsKeyFile string
-     Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
-  -tlsMinVersion string
-     Optional minimum TLS version to use for incoming requests over HTTPS if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+  -tlsKeyFile array
+     Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -tlsMinVersion array
+     Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -version
      Show VictoriaMetrics version
 ```

docs/vmauth.md

@@ -851,7 +851,7 @@ See the docs at https://docs.victoriametrics.com/vmauth.html .
   -fs.disableMmap
      Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
   -http.connTimeout duration
-     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
+     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem
   -http.disableResponseCompression
      Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth
   -http.header.csp default-src 'self'
@@ -873,10 +873,14 @@ See the docs at https://docs.victoriametrics.com/vmauth.html .
      Flag value can be read from the given file when using -httpAuth.password=file:///abs/path/to/file or -httpAuth.password=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -httpAuth.password=http://host/path or -httpAuth.password=https://host/path
   -httpAuth.username string
      Username for HTTP server's Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
-  -httpListenAddr string
-     TCP address to listen for http connections. See also -tls and -httpListenAddr.useProxyProtocol (default ":8427")
-  -httpListenAddr.useProxyProtocol
-     Whether to use proxy protocol for connections accepted at -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+  -httpListenAddr array
+     TCP address to listen for incoming http requests. See also -tls and -httpListenAddr.useProxyProtocol
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -httpListenAddr.useProxyProtocol array
+     Whether to use proxy protocol for connections accepted at the corresponding -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -internStringCacheExpireDuration duration
      The expiry duration for caches for interned strings. See https://en.wikipedia.org/wiki/String_interning . See also -internStringMaxLen and -internStringDisableCache (default 6m0s)
   -internStringDisableCache
@@ -930,10 +934,14 @@ See the docs at https://docs.victoriametrics.com/vmauth.html .
   -metricsAuthKey value
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path
-  -mtls
-     Whether to require valid client certificate for https requests to -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
-  -mtlsCAFile string
-     Optional path to TLS Root CA for verifying client certificates when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+  -mtls array
+     Whether to require valid client certificate for https requests to the corresponding -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -mtlsCAFile array
+     Optional path to TLS Root CA for verifying client certificates at the corresponding -httpListenAddr when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -pprofAuthKey value
      Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -pprofAuthKey=file:///abs/path/to/file or -pprofAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -pprofAuthKey=http://host/path or -pprofAuthKey=https://host/path
@@ -961,18 +969,27 @@ See the docs at https://docs.victoriametrics.com/vmauth.html .
   -retryStatusCodes array
      Comma-separated list of default HTTP response status codes when vmauth re-tries the request on other backends. See https://docs.victoriametrics.com/vmauth.html#load-balancing for details (default 0)
      Supports array of values separated by comma or specified via multiple flags.
-  -tls
-     Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
-  -tlsCertFile string
-     Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+     Empty values are set to default value.
+  -tls array
+     Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -tlsCertFile array
+     Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -tlsCipherSuites array
      Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
      Supports an array of values separated by comma or specified via multiple flags.
      Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
-  -tlsKeyFile string
-     Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
-  -tlsMinVersion string
-     Optional minimum TLS version to use for incoming requests over HTTPS if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+  -tlsKeyFile array
+     Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -tlsMinVersion array
+     Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -version
      Show VictoriaMetrics version
 ```

docs/vmbackup.md

@@ -337,7 +337,7 @@ Run `vmbackup -help` in order to see all the available options:
   -fs.disableMmap
      Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
   -http.connTimeout duration
-     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
+     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem
   -http.disableResponseCompression
      Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth
   -http.header.csp default-src 'self'
@@ -404,10 +404,14 @@ Run `vmbackup -help` in order to see all the available options:
   -metricsAuthKey value
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path
-  -mtls
-     Whether to require valid client certificate for https requests to -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
-  -mtlsCAFile string
-     Optional path to TLS Root CA for verifying client certificates when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+  -mtls array
+     Whether to require valid client certificate for https requests to the corresponding -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -mtlsCAFile array
+     Optional path to TLS Root CA for verifying client certificates at the corresponding -httpListenAddr when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -origin string
      Optional origin directory on the remote storage with old backup for server-side copying when performing full backup. This speeds up full backups
   -pprofAuthKey value
@@ -452,18 +456,26 @@ Run `vmbackup -help` in order to see all the available options:
      Name for the snapshot to backup. See https://docs.victoriametrics.com/Single-server-VictoriaMetrics.html#how-to-work-with-snapshots. There is no need in setting -snapshotName if -snapshot.createURL is set
   -storageDataPath string
      Path to VictoriaMetrics data. Must match -storageDataPath from VictoriaMetrics or vmstorage (default "victoria-metrics-data")
-  -tls
-     Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
-  -tlsCertFile string
-     Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+  -tls array
+     Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -tlsCertFile array
+     Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -tlsCipherSuites array
      Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
      Supports an array of values separated by comma or specified via multiple flags.
      Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
-  -tlsKeyFile string
-     Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
-  -tlsMinVersion string
-     Optional minimum TLS version to use for incoming requests over HTTPS if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+  -tlsKeyFile array
+     Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -tlsMinVersion array
+     Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -version
      Show VictoriaMetrics version
 ```

docs/vmbackupmanager.md

@@ -466,7 +466,7 @@ command-line flags:
   -fs.disableMmap
      Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
   -http.connTimeout duration
-     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
+     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem
   -http.disableResponseCompression
      Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth
   -http.header.csp default-src 'self'
@@ -488,8 +488,10 @@ command-line flags:
      Flag value can be read from the given file when using -httpAuth.password=file:///abs/path/to/file or -httpAuth.password=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -httpAuth.password=http://host/path or -httpAuth.password=https://host/path
   -httpAuth.username string
      Username for HTTP server's Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
-  -httpListenAddr string
-     Address to listen for http connections (default ":8300")
+  -httpListenAddr array
+     Address to listen for incoming http requests
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -internStringCacheExpireDuration duration
      The expiry duration for caches for interned strings. See https://en.wikipedia.org/wiki/String_interning . See also -internStringMaxLen and -internStringDisableCache (default 6m0s)
   -internStringDisableCache
@@ -540,10 +542,14 @@ command-line flags:
   -metricsAuthKey value
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path
-  -mtls
-     Whether to require valid client certificate for https requests to -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
-  -mtlsCAFile string
-     Optional path to TLS Root CA for verifying client certificates when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+  -mtls array
+     Whether to require valid client certificate for https requests to the corresponding -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -mtlsCAFile array
+     Optional path to TLS Root CA for verifying client certificates at the corresponding -httpListenAddr when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -pprofAuthKey value
      Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -pprofAuthKey=file:///abs/path/to/file or -pprofAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -pprofAuthKey=http://host/path or -pprofAuthKey=https://host/path
@@ -574,30 +580,28 @@ command-line flags:
      VictoriaMetrics create snapshot url. When this is given a snapshot will automatically be created during backup.Example: http://victoriametrics:8428/snapshot/create
   -snapshot.deleteURL string
      VictoriaMetrics delete snapshot url. Optional. Will be generated from snapshot.createURL if not provided. All created snaphosts will be automatically deleted.Example: http://victoriametrics:8428/snapshot/delete
-  -snapshot.tlsCAFile string
-     Optional path to TLS CA file to use for verifying connections to -snapshotCreateURL. By default, system CA is used
-  -snapshot.tlsCertFile string
-     Optional path to client-side TLS certificate file to use when connecting to -snapshotCreateURL
-  -snapshot.tlsInsecureSkipVerify
-     Whether to skip tls verification when connecting to -snapshotCreateURL
-  -snapshot.tlsKeyFile string
-     Optional path to client-side TLS certificate key to use when connecting to -snapshotCreateURL
-  -snapshot.tlsServerName string
-     Optional TLS server name to use for connections to -snapshotCreateURL. By default, the server name from -snapshotCreateURL is used
   -storageDataPath string
      Path to VictoriaMetrics data. Must match -storageDataPath from VictoriaMetrics or vmstorage (default "victoria-metrics-data")
-  -tls
-     Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
-  -tlsCertFile string
-     Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+  -tls array
+     Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -tlsCertFile array
+     Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -tlsCipherSuites array
      Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
      Supports an array of values separated by comma or specified via multiple flags.
      Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
-  -tlsKeyFile string
-     Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
-  -tlsMinVersion string
-     Optional minimum TLS version to use for incoming requests over HTTPS if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+  -tlsKeyFile array
+     Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -tlsMinVersion array
+     Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -version
      Show VictoriaMetrics version
 ```

docs/vmgateway.md

@@ -368,7 +368,7 @@ Below is the list of configuration flags (it can be viewed by running `./vmgatew
   -fs.disableMmap
      Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
   -http.connTimeout duration
-     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
+     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem
   -http.disableResponseCompression
      Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth
   -http.header.csp default-src 'self'
@@ -390,10 +390,14 @@ Below is the list of configuration flags (it can be viewed by running `./vmgatew
      Flag value can be read from the given file when using -httpAuth.password=file:///abs/path/to/file or -httpAuth.password=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -httpAuth.password=http://host/path or -httpAuth.password=https://host/path
   -httpAuth.username string
      Username for HTTP server's Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
-  -httpListenAddr string
-     TCP address to listen for http connections. See also -httpListenAddr.useProxyProtocol (default ":8431")
-  -httpListenAddr.useProxyProtocol
-     Whether to use proxy protocol for connections accepted at -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt
+  -httpListenAddr array
+     TCP address to listen for incoming http requests. See also -httpListenAddr.useProxyProtocol
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -httpListenAddr.useProxyProtocol array
+     Whether to use proxy protocol for connections accepted at the corresponding -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
   -internStringCacheExpireDuration duration
      The expiry duration for caches for interned strings. See https://en.wikipedia.org/wiki/String_interning . See also -internStringMaxLen and -internStringDisableCache (default 6m0s)
   -internStringDisableCache
@@ -434,10 +438,14 @@ Below is the list of configuration flags (it can be viewed by running `./vmgatew
   -metricsAuthKey value
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path
-  -mtls
-     Whether to require valid client certificate for https requests to -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
-  -mtlsCAFile string
-     Optional path to TLS Root CA for verifying client certificates when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+  -mtls array
+     Whether to require valid client certificate for https requests to the corresponding -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -mtlsCAFile array
+     Optional path to TLS Root CA for verifying client certificates at the corresponding -httpListenAddr when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -pprofAuthKey value
      Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -pprofAuthKey=file:///abs/path/to/file or -pprofAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -pprofAuthKey=http://host/path or -pprofAuthKey=https://host/path
@@ -471,18 +479,26 @@ Below is the list of configuration flags (it can be viewed by running `./vmgatew
      read access url address, example: http://vmselect:8481
   -remoteRead.disablePathAppend
      Whether to disable automatic appending of '/api/v1/query' path to the configured -datasource.url and -remoteRead.url
-  -tls
-     Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
-  -tlsCertFile string
-     Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+  -tls array
+     Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -tlsCertFile array
+     Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -tlsCipherSuites array
      Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
      Supports an array of values separated by comma or specified via multiple flags.
      Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
-  -tlsKeyFile string
-     Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
-  -tlsMinVersion string
-     Optional minimum TLS version to use for incoming requests over HTTPS if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+  -tlsKeyFile array
+     Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -tlsMinVersion array
+     Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -version
      Show VictoriaMetrics version
   -write.url string

docs/vmrestore.md

@@ -122,7 +122,7 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
   -fs.disableMmap
      Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
   -http.connTimeout duration
-     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
+     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem
   -http.disableResponseCompression
      Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth
   -http.header.csp default-src 'self'
@@ -189,10 +189,14 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
   -metricsAuthKey value
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path
-  -mtls
-     Whether to require valid client certificate for https requests to -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
-  -mtlsCAFile string
-     Optional path to TLS Root CA for verifying client certificates when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+  -mtls array
+     Whether to require valid client certificate for https requests to the corresponding -httpListenAddr . This flag works only if -tls flag is set. See also -mtlsCAFile . This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -mtlsCAFile array
+     Optional path to TLS Root CA for verifying client certificates at the corresponding -httpListenAddr when -mtls is enabled. By default the host system TLS Root CA is used for client certificate verification. This flag is available only in Enterprise binaries. See https://docs.victoriametrics.com/enterprise.html
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -pprofAuthKey value
      Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
      Flag value can be read from the given file when using -pprofAuthKey=file:///abs/path/to/file or -pprofAuthKey=file://./relative/path/to/file . Flag value can be read from the given http/https url when using -pprofAuthKey=http://host/path or -pprofAuthKey=https://host/path
@@ -219,32 +223,30 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
      See https://docs.aws.amazon.com/AmazonS3/latest/userguide/storage-class-intro.html
   -skipBackupCompleteCheck
      Whether to skip checking for 'backup complete' file in -src. This may be useful for restoring from old backups, which were created without 'backup complete' file
-  -snapshot.tlsCAFile string
-     Optional path to TLS CA file to use for verifying connections to -snapshotCreateURL. By default, system CA is used
-  -snapshot.tlsCertFile string
-     Optional path to client-side TLS certificate file to use when connecting to -snapshotCreateURL
-  -snapshot.tlsInsecureSkipVerify
-     Whether to skip tls verification when connecting to -snapshotCreateURL
-  -snapshot.tlsKeyFile string
-     Optional path to client-side TLS certificate key to use when connecting to -snapshotCreateURL
-  -snapshot.tlsServerName string
-     Optional TLS server name to use for connections to -snapshotCreateURL. By default, the server name from -snapshotCreateURL is used
   -src string
      Source path with backup on the remote storage. Example: gs://bucket/path/to/backup, s3://bucket/path/to/backup, azblob://container/path/to/backup or fs:///path/to/local/backup
   -storageDataPath string
      Destination path where backup must be restored. VictoriaMetrics must be stopped when restoring from backup. -storageDataPath dir can be non-empty. In this case the contents of -storageDataPath dir is synchronized with -src contents, i.e. it works like 'rsync --delete' (default "victoria-metrics-data")
-  -tls
-     Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
-  -tlsCertFile string
-     Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+  -tls array
+     Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to false.
+  -tlsCertFile array
+     Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -tlsCipherSuites array
      Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
      Supports an array of values separated by comma or specified via multiple flags.
      Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
-  -tlsKeyFile string
-     Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
-  -tlsMinVersion string
-     Optional minimum TLS version to use for incoming requests over HTTPS if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+  -tlsKeyFile array
+     Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
+  -tlsMinVersion array
+     Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
+     Supports an array of values separated by comma or specified via multiple flags.
+     Value can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
   -version
      Show VictoriaMetrics version
 ```