diff --git a/app/vmagent/README.md b/app/vmagent/README.md
index fa613a019..704135e58 100644
--- a/app/vmagent/README.md
+++ b/app/vmagent/README.md
@@ -490,7 +490,7 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
   -loggerOutput string
     	Output for the logs. Supported values: stderr, stdout (default "stderr")
   -loggerTimezone string
-    	Timezone to use for timestamps in logs. Local timezone can be used (default "UTC")
+    	Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
   -loggerWarnsPerSecondLimit int
     	Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
   -maxConcurrentInserts int
@@ -518,6 +518,10 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
     	Trim timestamps for OpenTSDB HTTP data to this duration. Minimum practical duration is 1ms. Higher duration (i.e. 1s) may be used for reducing disk space usage for timestamp data (default 1ms)
   -pprofAuthKey string
     	Auth key for /debug/pprof. It overrides httpAuth settings
+  -promscrape.cluster.memberNum int
+    	The number of number in the cluster of scrapers. It must be an unique value in the range 0 ... promscrape.cluster.membersCount-1 across scrapers in the cluster
+  -promscrape.cluster.membersCount int
+    	The number of members in a cluster of scrapers. Each member must have an unique -promscrape.cluster.memberNum in the range 0 ... promscrape.cluster.membersCount-1 . Each member then scrapes roughly 1/N of all the targets. By default cluster scraping is disabled, i.e. a single scraper scrapes all the targets
   -promscrape.config string
     	Optional path to Prometheus config file with 'scrape_configs' section containing targets to scrape. See https://victoriametrics.github.io/#how-to-scrape-prometheus-exporters-such-as-node-exporter for details
   -promscrape.config.dryRun
@@ -550,6 +554,8 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
     	Interval for checking for changes in 'file_sd_config'. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#file_sd_config for details (default 30s)
   -promscrape.gceSDCheckInterval gce_sd_configs
     	Interval for checking for changes in gce. This works only if gce_sd_configs is configured in '-promscrape.config' file. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#gce_sd_config for details (default 1m0s)
+  -promscrape.kubernetes.apiServerTimeout duration
+    	How frequently to reload the full state from Kuberntes API server (default 10m0s)
   -promscrape.kubernetesSDCheckInterval kubernetes_sd_configs
     	Interval for checking for changes in Kubernetes API server. This works only if kubernetes_sd_configs is configured in '-promscrape.config' file. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#kubernetes_sd_config for details (default 30s)
   -promscrape.maxDroppedTargets droppedTargets
@@ -575,7 +581,7 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
     	Optional bearer auth token to use for -remoteWrite.url. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
     	Supports array of values separated by comma or specified via multiple flags.
   -remoteWrite.flushInterval duration
-    	Interval for flushing the data to remote storage. Higher value reduces network bandwidth usage at the cost of delayed push of scraped data to remote storage. Minimum supported interval is 1 second (default 1s)
+    	Interval for flushing the data to remote storage. This option takes effect only when less than 10K data points per second are pushed to -remoteWrite.url (default 1s)
   -remoteWrite.label array
     	Optional label in the form 'name=value' to add to all the metrics before sending them to -remoteWrite.url. Pass multiple -remoteWrite.label flags in order to add multiple flags to metrics before sending them to remote storage
     	Supports array of values separated by comma or specified via multiple flags.
diff --git a/app/vmalert/README.md b/app/vmalert/README.md
index ebfd07c2b..78eb9b71d 100644
--- a/app/vmalert/README.md
+++ b/app/vmalert/README.md
@@ -197,7 +197,7 @@ to set `-datasource.appendTypePrefix` flag to `true`, so vmalert can adjust URL
 The shortlist of configuration flags is the following:
 ```
   -datasource.appendTypePrefix
-        Whether to add type prefix to -datasource.url based on the query type. Set to true if sending different query types to VMSelect URL.
+    	Whether to add type prefix to -datasource.url based on the query type. Set to true if sending different query types to VMSelect URL.
   -datasource.basicAuth.password string
     	Optional basic auth password for -datasource.url
   -datasource.basicAuth.username string
@@ -206,6 +206,8 @@ The shortlist of configuration flags is the following:
     	Lookback defines how far to look into past when evaluating queries. For example, if datasource.lookback=5m then param "time" with value now()-5m will be added to every query.
   -datasource.maxIdleConnections int
     	Defines the number of idle (keep-alive connections) to configured datasource.Consider to set this value equal to the value: groups_total * group.concurrency. Too low value may result into high number of sockets in TIME_WAIT state. (default 100)
+  -datasource.queryStep duration
+    	queryStep defines how far a value can fallback to when evaluating queries. For example, if datasource.queryStep=15s then param "step" with value "15s" will be added to every query.
   -datasource.tlsCAFile string
     	Optional path to TLS CA file to use for verifying connections to -datasource.url. By default system CA is used
   -datasource.tlsCertFile string
@@ -236,6 +238,8 @@ The shortlist of configuration flags is the following:
     	Supports array of values separated by comma or specified via multiple flags.
   -external.url string
     	External URL is used as alert's source for sent alerts to the notifier
+  -fs.disableMmap
+    	Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
   -http.connTimeout duration
     	Incoming http connections are closed after the configured timeout. This may help spreading incoming load among a cluster of services behind load balancer. Note that the real timeout may be bigger by up to 10% as a protection from Thundering herd problem (default 2m0s)
   -http.disableResponseCompression
@@ -264,6 +268,8 @@ The shortlist of configuration flags is the following:
     	Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO")
   -loggerOutput string
     	Output for the logs. Supported values: stderr, stdout (default "stderr")
+  -loggerTimezone string
+    	Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
   -loggerWarnsPerSecondLimit int
     	Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
   -memory.allowedBytes value
diff --git a/app/vmauth/README.md b/app/vmauth/README.md
index c3daf9d8f..41492efd1 100644
--- a/app/vmauth/README.md
+++ b/app/vmauth/README.md
@@ -174,6 +174,8 @@ See the docs at https://victoriametrics.github.io/vmauth.html .
     	Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set
   -envflag.prefix string
     	Prefix for environment variables if -envflag.enable is set
+  -fs.disableMmap
+    	Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
   -http.connTimeout duration
     	Incoming http connections are closed after the configured timeout. This may help spreading incoming load among a cluster of services behind load balancer. Note that the real timeout may be bigger by up to 10% as a protection from Thundering herd problem (default 2m0s)
   -http.disableResponseCompression
@@ -192,14 +194,20 @@ See the docs at https://victoriametrics.github.io/vmauth.html .
     	Username for HTTP Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
   -httpListenAddr string
     	TCP address to listen for http connections (default ":8427")
+  -loggerDisableTimestamps
+    	Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
-    	Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit (default 10)
+    	Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
   -loggerFormat string
     	Format for logs. Possible values: default, json (default "default")
   -loggerLevel string
     	Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO")
   -loggerOutput string
     	Output for the logs. Supported values: stderr, stdout (default "stderr")
+  -loggerTimezone string
+    	Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
+  -loggerWarnsPerSecondLimit int
+    	Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
   -memory.allowedBytes value
     	Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
     	Supports the following optional suffixes for values: KB, MB, GB, KiB, MiB, GiB (default 0)
diff --git a/app/vmbackup/README.md b/app/vmbackup/README.md
index b7bbf3e74..37bc102f4 100644
--- a/app/vmbackup/README.md
+++ b/app/vmbackup/README.md
@@ -191,14 +191,20 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
     	Prefix for environment variables if -envflag.enable is set
   -fs.disableMmap
     	Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
+  -loggerDisableTimestamps
+    	Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
-    	Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit (default 10)
+    	Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
   -loggerFormat string
     	Format for logs. Possible values: default, json (default "default")
   -loggerLevel string
     	Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO")
   -loggerOutput string
     	Output for the logs. Supported values: stderr, stdout (default "stderr")
+  -loggerTimezone string
+    	Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
+  -loggerWarnsPerSecondLimit int
+    	Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
   -maxBytesPerSecond value
     	The maximum upload speed. There is no limit if it is set to 0
     	Supports the following optional suffixes for values: KB, MB, GB, KiB, MiB, GiB (default 0)
diff --git a/app/vmrestore/README.md b/app/vmrestore/README.md
index b18177f39..c12629549 100644
--- a/app/vmrestore/README.md
+++ b/app/vmrestore/README.md
@@ -91,14 +91,20 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
     	Prefix for environment variables if -envflag.enable is set
   -fs.disableMmap
     	Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
+  -loggerDisableTimestamps
+    	Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
-    	Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit (default 10)
+    	Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
   -loggerFormat string
     	Format for logs. Possible values: default, json (default "default")
   -loggerLevel string
     	Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO")
   -loggerOutput string
     	Output for the logs. Supported values: stderr, stdout (default "stderr")
+  -loggerTimezone string
+    	Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
+  -loggerWarnsPerSecondLimit int
+    	Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
   -maxBytesPerSecond value
     	The maximum download speed. There is no limit if it is set to 0
     	Supports the following optional suffixes for values: KB, MB, GB, KiB, MiB, GiB (default 0)
diff --git a/docs/vmagent.md b/docs/vmagent.md
index fa613a019..704135e58 100644
--- a/docs/vmagent.md
+++ b/docs/vmagent.md
@@ -490,7 +490,7 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
   -loggerOutput string
     	Output for the logs. Supported values: stderr, stdout (default "stderr")
   -loggerTimezone string
-    	Timezone to use for timestamps in logs. Local timezone can be used (default "UTC")
+    	Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
   -loggerWarnsPerSecondLimit int
     	Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
   -maxConcurrentInserts int
@@ -518,6 +518,10 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
     	Trim timestamps for OpenTSDB HTTP data to this duration. Minimum practical duration is 1ms. Higher duration (i.e. 1s) may be used for reducing disk space usage for timestamp data (default 1ms)
   -pprofAuthKey string
     	Auth key for /debug/pprof. It overrides httpAuth settings
+  -promscrape.cluster.memberNum int
+    	The number of number in the cluster of scrapers. It must be an unique value in the range 0 ... promscrape.cluster.membersCount-1 across scrapers in the cluster
+  -promscrape.cluster.membersCount int
+    	The number of members in a cluster of scrapers. Each member must have an unique -promscrape.cluster.memberNum in the range 0 ... promscrape.cluster.membersCount-1 . Each member then scrapes roughly 1/N of all the targets. By default cluster scraping is disabled, i.e. a single scraper scrapes all the targets
   -promscrape.config string
     	Optional path to Prometheus config file with 'scrape_configs' section containing targets to scrape. See https://victoriametrics.github.io/#how-to-scrape-prometheus-exporters-such-as-node-exporter for details
   -promscrape.config.dryRun
@@ -550,6 +554,8 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
     	Interval for checking for changes in 'file_sd_config'. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#file_sd_config for details (default 30s)
   -promscrape.gceSDCheckInterval gce_sd_configs
     	Interval for checking for changes in gce. This works only if gce_sd_configs is configured in '-promscrape.config' file. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#gce_sd_config for details (default 1m0s)
+  -promscrape.kubernetes.apiServerTimeout duration
+    	How frequently to reload the full state from Kuberntes API server (default 10m0s)
   -promscrape.kubernetesSDCheckInterval kubernetes_sd_configs
     	Interval for checking for changes in Kubernetes API server. This works only if kubernetes_sd_configs is configured in '-promscrape.config' file. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#kubernetes_sd_config for details (default 30s)
   -promscrape.maxDroppedTargets droppedTargets
@@ -575,7 +581,7 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
     	Optional bearer auth token to use for -remoteWrite.url. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
     	Supports array of values separated by comma or specified via multiple flags.
   -remoteWrite.flushInterval duration
-    	Interval for flushing the data to remote storage. Higher value reduces network bandwidth usage at the cost of delayed push of scraped data to remote storage. Minimum supported interval is 1 second (default 1s)
+    	Interval for flushing the data to remote storage. This option takes effect only when less than 10K data points per second are pushed to -remoteWrite.url (default 1s)
   -remoteWrite.label array
     	Optional label in the form 'name=value' to add to all the metrics before sending them to -remoteWrite.url. Pass multiple -remoteWrite.label flags in order to add multiple flags to metrics before sending them to remote storage
     	Supports array of values separated by comma or specified via multiple flags.
diff --git a/docs/vmalert.md b/docs/vmalert.md
index ebfd07c2b..78eb9b71d 100644
--- a/docs/vmalert.md
+++ b/docs/vmalert.md
@@ -197,7 +197,7 @@ to set `-datasource.appendTypePrefix` flag to `true`, so vmalert can adjust URL
 The shortlist of configuration flags is the following:
 ```
   -datasource.appendTypePrefix
-        Whether to add type prefix to -datasource.url based on the query type. Set to true if sending different query types to VMSelect URL.
+    	Whether to add type prefix to -datasource.url based on the query type. Set to true if sending different query types to VMSelect URL.
   -datasource.basicAuth.password string
     	Optional basic auth password for -datasource.url
   -datasource.basicAuth.username string
@@ -206,6 +206,8 @@ The shortlist of configuration flags is the following:
     	Lookback defines how far to look into past when evaluating queries. For example, if datasource.lookback=5m then param "time" with value now()-5m will be added to every query.
   -datasource.maxIdleConnections int
     	Defines the number of idle (keep-alive connections) to configured datasource.Consider to set this value equal to the value: groups_total * group.concurrency. Too low value may result into high number of sockets in TIME_WAIT state. (default 100)
+  -datasource.queryStep duration
+    	queryStep defines how far a value can fallback to when evaluating queries. For example, if datasource.queryStep=15s then param "step" with value "15s" will be added to every query.
   -datasource.tlsCAFile string
     	Optional path to TLS CA file to use for verifying connections to -datasource.url. By default system CA is used
   -datasource.tlsCertFile string
@@ -236,6 +238,8 @@ The shortlist of configuration flags is the following:
     	Supports array of values separated by comma or specified via multiple flags.
   -external.url string
     	External URL is used as alert's source for sent alerts to the notifier
+  -fs.disableMmap
+    	Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
   -http.connTimeout duration
     	Incoming http connections are closed after the configured timeout. This may help spreading incoming load among a cluster of services behind load balancer. Note that the real timeout may be bigger by up to 10% as a protection from Thundering herd problem (default 2m0s)
   -http.disableResponseCompression
@@ -264,6 +268,8 @@ The shortlist of configuration flags is the following:
     	Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO")
   -loggerOutput string
     	Output for the logs. Supported values: stderr, stdout (default "stderr")
+  -loggerTimezone string
+    	Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
   -loggerWarnsPerSecondLimit int
     	Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
   -memory.allowedBytes value
diff --git a/docs/vmauth.md b/docs/vmauth.md
index c3daf9d8f..41492efd1 100644
--- a/docs/vmauth.md
+++ b/docs/vmauth.md
@@ -174,6 +174,8 @@ See the docs at https://victoriametrics.github.io/vmauth.html .
     	Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set
   -envflag.prefix string
     	Prefix for environment variables if -envflag.enable is set
+  -fs.disableMmap
+    	Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
   -http.connTimeout duration
     	Incoming http connections are closed after the configured timeout. This may help spreading incoming load among a cluster of services behind load balancer. Note that the real timeout may be bigger by up to 10% as a protection from Thundering herd problem (default 2m0s)
   -http.disableResponseCompression
@@ -192,14 +194,20 @@ See the docs at https://victoriametrics.github.io/vmauth.html .
     	Username for HTTP Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
   -httpListenAddr string
     	TCP address to listen for http connections (default ":8427")
+  -loggerDisableTimestamps
+    	Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
-    	Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit (default 10)
+    	Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
   -loggerFormat string
     	Format for logs. Possible values: default, json (default "default")
   -loggerLevel string
     	Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO")
   -loggerOutput string
     	Output for the logs. Supported values: stderr, stdout (default "stderr")
+  -loggerTimezone string
+    	Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
+  -loggerWarnsPerSecondLimit int
+    	Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
   -memory.allowedBytes value
     	Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
     	Supports the following optional suffixes for values: KB, MB, GB, KiB, MiB, GiB (default 0)
diff --git a/docs/vmbackup.md b/docs/vmbackup.md
index b7bbf3e74..37bc102f4 100644
--- a/docs/vmbackup.md
+++ b/docs/vmbackup.md
@@ -191,14 +191,20 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
     	Prefix for environment variables if -envflag.enable is set
   -fs.disableMmap
     	Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
+  -loggerDisableTimestamps
+    	Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
-    	Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit (default 10)
+    	Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
   -loggerFormat string
     	Format for logs. Possible values: default, json (default "default")
   -loggerLevel string
     	Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO")
   -loggerOutput string
     	Output for the logs. Supported values: stderr, stdout (default "stderr")
+  -loggerTimezone string
+    	Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
+  -loggerWarnsPerSecondLimit int
+    	Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
   -maxBytesPerSecond value
     	The maximum upload speed. There is no limit if it is set to 0
     	Supports the following optional suffixes for values: KB, MB, GB, KiB, MiB, GiB (default 0)
diff --git a/docs/vmrestore.md b/docs/vmrestore.md
index b18177f39..c12629549 100644
--- a/docs/vmrestore.md
+++ b/docs/vmrestore.md
@@ -91,14 +91,20 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
     	Prefix for environment variables if -envflag.enable is set
   -fs.disableMmap
     	Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
+  -loggerDisableTimestamps
+    	Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
-    	Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit (default 10)
+    	Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
   -loggerFormat string
     	Format for logs. Possible values: default, json (default "default")
   -loggerLevel string
     	Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO")
   -loggerOutput string
     	Output for the logs. Supported values: stderr, stdout (default "stderr")
+  -loggerTimezone string
+    	Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
+  -loggerWarnsPerSecondLimit int
+    	Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
   -maxBytesPerSecond value
     	The maximum download speed. There is no limit if it is set to 0
     	Supports the following optional suffixes for values: KB, MB, GB, KiB, MiB, GiB (default 0)