stream aggregation: perform deduplication for all received data when … (#6711)

…specifying `-streamAggr.dedupInterval` or
`-remoteWrite.streamAggr.dedupInterval` command-line flag

[The
documentation](https://docs.victoriametrics.com/stream-aggregation/)
contains conflicting descriptions regarding deduplication for
non-matched series when `-remoteWrite.streamAggr.config` and / or
`-streamAggr.config` are set:
1. Statement below says **all the received data** is deduplicated:
>[vmagent](https://docs.victoriametrics.com/vmagent/) supports
relabeling, deduplication and stream aggregation for all the received
data, scraped or pushed. Then, the collected data will be forwarded to
specified -remoteWrite.url destinations. The data processing order is
the following:
>1. all the received data is relabeled according to the specified
[-remoteWrite.relabelConfig](https://docs.victoriametrics.com/vmagent/#relabeling)
(if it is set)
>2. all the received data is deduplicated according to specified
[-streamAggr.dedupInterval](https://docs.victoriametrics.com/stream-aggregation/#deduplication)
(if it is set to duration bigger than 0)

2. Another statement says the deduplication is performed individually
for the **matching samples**
>The de-deduplication is performed after applying
[relabeling](https://docs.victoriametrics.com/vmagent/#relabeling) and
before performing the aggregation. If the -remoteWrite.streamAggr.config
and / or -streamAggr.config is set, then the de-duplication is performed
individually per each [stream aggregation
config](https://docs.victoriametrics.com/stream-aggregation/#stream-aggregation-config)
for the matching samples after applying
[input_relabel_configs](https://docs.victoriametrics.com/stream-aggregation/#relabeling).


Considering the following deduplication use cases:
1. To apply deduplication(globally or for specific remoteWrite
destination) for all the received data, scraped or pushed
--- using `-streamAggr.dedupInterval` or
`-remoteWrite.streamAggr.dedupInterval`.
2. To deduplicate and aggregate metrics that match the rule `match`
filters
--- using `-remoteWrite.streamAggr.config` and specifiying
`dedup_interval` option in [stream aggregation
config](https://docs.victoriametrics.com/stream-aggregation/#stream-aggregation-config).
3. To deduplicate all the received data while having `streamAggr.config`
for some metrics
--- no way for a single vmagent now, need to set up two level vmagents

This PR implements case3.

---------

Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>

app/vmagent/remotewrite/remotewrite.go

@@ -494,7 +494,8 @@ func tryPush(at *auth.Token, wr *prompbmarshal.WriteRequest, forceDropSamplesOnF
 				tssBlock = dropAggregatedSeries(tssBlock, matchIdxs.B, *streamAggrGlobalDropInput)
 			}
 			matchIdxsPool.Put(matchIdxs)
-		} else if deduplicatorGlobal != nil {
+		}
+		if deduplicatorGlobal != nil {
 			deduplicatorGlobal.Push(tssBlock)
 			tssBlock = tssBlock[:0]
 		}
@@ -922,7 +923,8 @@ func (rwctx *remoteWriteCtx) TryPush(tss []prompbmarshal.TimeSeries, forceDropSa
 			tss = dropAggregatedSeries(tss, matchIdxs.B, rwctx.streamAggrDropInput)
 		}
 		matchIdxsPool.Put(matchIdxs)
-	} else if rwctx.deduplicator != nil {
+	}
+	if rwctx.deduplicator != nil {
 		rwctx.deduplicator.Push(tss)
 		return true
 	}

app/vmagent/remotewrite/streamaggr.go

@@ -130,13 +130,12 @@ func initStreamAggrConfigGlobal() {
 		sasGlobal.Store(sas)
 		metrics.GetOrCreateCounter(fmt.Sprintf(`vmagent_streamaggr_config_reload_successful{path=%q}`, filePath)).Set(1)
 		metrics.GetOrCreateCounter(fmt.Sprintf(`vmagent_streamaggr_config_reload_success_timestamp_seconds{path=%q}`, filePath)).Set(fasttime.UnixTimestamp())
-	} else {
+	}
 	dedupInterval := streamAggrGlobalDedupInterval.Duration()
 	if dedupInterval > 0 {
 		deduplicatorGlobal = streamaggr.NewDeduplicator(pushToRemoteStoragesTrackDropped, dedupInterval, *streamAggrGlobalDropInputLabels, "dedup-global")
 	}
 }
-}
 
 func (rwctx *remoteWriteCtx) initStreamAggrConfig() {
 	idx := rwctx.idx
@@ -152,14 +151,13 @@ func (rwctx *remoteWriteCtx) initStreamAggrConfig() {
 		rwctx.streamAggrDropInput = streamAggrDropInput.GetOptionalArg(idx)
 		metrics.GetOrCreateCounter(fmt.Sprintf(`vmagent_streamaggr_config_reload_successful{path=%q}`, filePath)).Set(1)
 		metrics.GetOrCreateCounter(fmt.Sprintf(`vmagent_streamaggr_config_reload_success_timestamp_seconds{path=%q}`, filePath)).Set(fasttime.UnixTimestamp())
-	} else {
+	}
 	dedupInterval := streamAggrDedupInterval.GetOptionalArg(idx)
 	if dedupInterval > 0 {
 		alias := fmt.Sprintf("dedup-%d", idx+1)
 		rwctx.deduplicator = streamaggr.NewDeduplicator(rwctx.pushInternalTrackDropped, dedupInterval, *streamAggrDropInputLabels, alias)
 	}
 }
-}
 
 func (rwctx *remoteWriteCtx) reloadStreamAggrConfig() {
 	path := streamAggrConfig.GetOptionalArg(rwctx.idx)

docs/changelog/CHANGELOG.md

@@ -18,6 +18,10 @@ See also [LTS releases](https://docs.victoriametrics.com/lts-releases/).
 
 ## tip
 
+**Update note 1: [stream aggregation](https://docs.victoriametrics.com/stream-aggregation/): perform deduplication for all received data when specifying `-streamAggr.dedupInterval` or `-remoteWrite.streamAggr.dedupInterval` command-line flag. Previously, if the `-remoteWrite.streamAggr.config` or `-streamAggr.config` is set, only series that matched aggregation config were deduplicated. See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6711#issuecomment-2288361213) for details.**
+
+* FEATURE [stream aggregation](https://docs.victoriametrics.com/stream-aggregation/): perform deduplication for all received data when specifying `-streamAggr.dedupInterval` or `-remoteWrite.streamAggr.dedupInterval` command-line flags are set. Previously, if the `-remoteWrite.streamAggr.config` or `-streamAggr.config` is set, only series that matched aggregation config were deduplicated. See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6711#issuecomment-2288361213) for details.
+
 ## [v1.103.0](https://github.com/VictoriaMetrics/VictoriaMetrics/releases/tag/v1.103.0)
 
 Released at 2024-08-28

docs/stream-aggregation.md

@@ -86,8 +86,6 @@ before sending them to the configured `-remoteWrite.url`. The de-duplication can
   only the last sample per each seen [time series](https://docs.victoriametrics.com/keyconcepts/#time-series) per every 30 seconds.
   The de-deduplication is performed after applying [relabeling](https://docs.victoriametrics.com/vmagent/#relabeling) and
   before performing the aggregation.
-  If the `-remoteWrite.streamAggr.config` and / or `-streamAggr.config` is set, then the de-duplication is performed individually per each
-  [stream aggregation config](#stream-aggregation-config) for the matching samples after applying [input_relabel_configs](#relabeling).
 
 - By specifying `dedup_interval` option individually per each [stream aggregation config](#stream-aggregation-config) 
   in `-remoteWrite.streamAggr.config` or `-streamAggr.config` configs.
@@ -100,9 +98,6 @@ before sending them to the configured `-remoteWrite.url`. The de-duplication can
     seen [time series](https://docs.victoriametrics.com/keyconcepts/#time-series) per every 30 seconds.
     The de-duplication is performed after applying `-relabelConfig` [relabeling](https://docs.victoriametrics.com/#relabeling).
 
-    If the `-streamAggr.config` is set, then the de-duplication is performed individually per each [stream aggregation config](#stream-aggregation-config)
-    for the matching samples after applying [input_relabel_configs](#relabeling).
-
   - By specifying `dedup_interval` option individually per each [stream aggregation config](#stream-aggregation-config) at `-streamAggr.config`.
 
 It is possible to drop the given labels before applying the de-duplication. See [these docs](#dropping-unneeded-labels).