vmalert: support `limit` param in groups definition
`limit` param limits number of time series samples produced by a single rule
during execution.
On reaching the limit rule will return an err.
Signed-off-by: lihaowei <haoweili35@gmail.com>
The change updates histogram for registering SD update duration
only SD is considered as `active`. SD is active if at least
one scraper for this SD has started.
This change supposed to reduce metrics cardinality produced
by duration histogram which gets updated even if SD isn't configured.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2671
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Workers count for merges affects the max part size during merges. Such behaviour
protects storage from running out of disk space for scenario when all workers
are merging parts with the max size.
This works very well for most cases. But for systems where high number of CPUs
is allocated for vmstorage components this could significantly impact the max
part size and result in more unmerged parts than expected.
While checking multiple production highly loaded setups it was discovered that
`max_over_time(vm_active_merges{type="storage/big}[1h]}"` rarely exceeds 2,
and `max_over_time(vm_active_merges{type="storage/small}[1h]}"` rarely exceeds 4.
The change in this commit limits the max value for concurrency accordingly.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Remove unused js bloatware from /targets page. This strips down binary size by more than 100Kb
- Add /service-discovery page for API compatibility with Prometheus
- Properly load bootstrap.min.css from /prometheus/targets
- Serve static contents for /targets page from app/vminsert instead of app/vmselect, because /targets page is served from there
- Take into account `ca`, `key` and `cert` values when generating string representation of TLSConfig.
Print hashes instead of real values because of security considerations.
- Properly update Config.tlsCertDigets when `key` and `cert` values are set.
This allows properly updating scrape targets after these values are updated in configs.
- Do not re-generate certificate from `key` and `cert` values per each call to getTLSCert,
because these values are immutable.
- Do not set `ca` value from `ca_file` value, so it isn't exposed at `/config` page.
- Generate proper error messages on incorrect `key`, `cert` or `ca` values.
The default size of `indexdb/tagFilters` now can be overridden via
`storage.cacheSizeIndexDBTagFilters` flag.
Please, be careful with changing default size since it may
lead to inefficient work of the vmstorage or OOM exceptions.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2663
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* promrelabel: add support of `lowercase` and `uppercase` relabeling actions
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2664
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/storage: make golangci-lint happy
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: properly updates discovered scrape works
previously, added or updated scrapeworks may override previuosly
discovered.
it happens because swosByKey may contain small subset of kubernetes
objects with it's labels.
It happens for objectsUpdated and objectsAdded maps, which include only changed elements
* Properly calculate vm_promscrape_discovery_kubernetes_scrape_works
Co-authored-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This adds the ability to utilize sigv4 signing for all AWS services not
just "aps". When the newly introduced property "service" is not set it
will default to "aps".
Signed-off-by: Boris Petersen <boris.petersen@idealo.de>
Previously ScrapeConfig.clone() was improperly copying promauth.Secret fields -
their contents was replaced with `<secret>` value.
This led to inability to use passwords and secrets in `-promscrape.config` file.
The bug has been introduced in v1.77.0 in the commit 67b10896d2
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2551
* {lib/promscrape,app/vmagent}: adds sigv4 support for vmagent remoteWrite
moves aws related code into separate lib from lib/promscrape
it allows to write data from vmagent to the AWS managed prometheus (cortex)
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1287
* Apply suggestions from code review
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/{storage,flagutil} - Add option for snapshot autoremoval
- add prometheus-like duration as command flag
- add option to delete stale snapshots
- update duration.go flag to re-use own code
* wip
* lib/flagutil: re-use Duration.Set() call in NewDuration
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
replaces internStringMap with sync.Map - it greatly reduces lock contention
concurently reload scrape work for api watcher - each object labels added by dedicated CPU
changes can be tested with following script https://gist.github.com/f41gh7/6f8f8d8719786aff1f18a85c23aebf70
Reduce the number of memory allocations in this function. This improves its performance by up to 50%.
This should improve service discovery speed when big number of potential targets with big number of meta-labels
are generated by service discovery.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2270
This reduces the number of allocations and improves the performance for updating dropped targets' map.
This map is exposed at /api/v1/targets as in droppedTargets list.
* lib/promscrape: adds job restart method
it must restart only ScrapeConfig with changed content
this change greatly reduce time, that needed for job restart
and it should decrease possible data loss when config frequently changed at kubernetes based deployments
Apply suggestions from code review
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* wip
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/httpserver: added tlsCipherSuites flag
* lib/httpserver: compare lower case strings
* lib/httpserver: use EqualFold
* lib/httpserver: used flagutil.NewArray, supported only strings cipher suites
* lib/httpserver: updated flag description, added flag to documentation
* Update lib/httpserver/httpserver.go
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This change fixes incorrect marshalling for ScrapeConfig
it affects http endpoint and ScrapeConfig checksum.
With omitempty, custom Marshaller is not called if field is not a pointer.
Previously this issue happened at vmalert
* lib/promscrape: allows to use k8s pod name as clusterMemberNum
it must improve user expirience and simplify clustering scrapers.
it must allow to use vmagent cluster with distroless images
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2359
* Apply suggestions from code review
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
previously, if native block cannot be unmarshaled, wg.Done wasn't called by unmarshal work.
It leads to connection blocking and possible dead-lock at client side
This metric is equivalent to `vm_available_memory_bytes`, but it has better name,
since the metric is related to a process, not VictoriaMetrics itself.
Leave `vm_available_memory_bytes` for backwards compatibility.
This should improve the performance for items sorting inside inmemoryBlock.MarshalUnsortedData
if they have common prefix.
While at it, improve the performance for inmemoryBlock.updateCommonPrefix for sorted items.
This should improve performance for inmemoryBlock.MarshalSortedData during background merge.
This reduces memory usage under production workloads by up to 10%,
while CPU spent on GC remains roughly the same.
The CPU spent on GC can be monitored with go_memstats_gc_cpu_fraction metric
* lib/protoparser: changes ParseStream for native format
uses reader instead of http.Request
updates app/vmagent and app/vmagent method usage
* app/vmctl: add verify-block subcommand
it allows to check exported from VictoriaMetrics data block in native format
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2362
Update app/vmctl/README.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* lib/{storage,regexpcache}: replaces regexpCacheMap with LRU cache
It should decrease memory usage for regexp caching
with storing cacheEntry by pointer - golang map should be able to effectivly shrink it's size
original issue with this case - unexpected map grows and storage OOM
Apply suggestions from code review
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Adds missing metrics for regexp cache and regexpPrefixes cache
* wip
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* fix for issue 2255 - matchTagFilters for positive empty-match filters
* add example to comments
* formatting
* add test for positive empty match
* formatting
The lifetime of storageBlock is much shorter comparing to the lifetime of inmemoryPart,
so sync.Pool usage should reduce overall memory usage and improve performance
because of better locality of reference when marshaling inmemoryBlock to inmemoryPart.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2247
There is no need to sort the underlying data according to sorted items there.
This should reduce cpu usage when registering new time series in `indexdb`.
Thanks to @ahfuzhang for the suggestion at https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2245
* lib/discovery/consul: update services on the watcher's start
Previously, watcher's start was only initing goroutines for discovery
but not waiting for the first iteration to end. It means first Consul
discovery wasn't returning discovered targets until the next iteration.
The change makes the watcher's start blocking until we get first discovery
iteration done and all registries updated.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: remove workarounds for consul SD
Now when consul SD lib properly updates services
on the first start, we don't need workarounds in vmalert.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/discovery/consul: update after review
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Postpone the pre-poulation to the last hour of the current day. This should reduce the number
of useless entries in the next per-day index, which shouldn't be created there,
when the corresponding time series are stopped to be pushed during the current day.
- Make the pre-population more smooth in time by using the hash of MetricID instead of MetricID itself
when calculating the need for for the given MetricID pre-population.
- Sync the logic for pre-population of the next day inverted index with the logic of pre-populating tsid cache
after indexdb rotation. This should improve code maintainability.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/430
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
* lib/index: reduce read/write load after indexDB rotation
IndexDB in VM is responsible for storing TSID - ID's used for identifying
time series. The index is stored on disk and used by both ingestion and read path.
IndexDB is stored separately to data parts and is global for all stored data.
It can't be deleted partially as VM deletes data parts. Instead, indexDB is
rotated once in `retention` interval.
The rotation procedure means that `current` indexDB becomes `previous`,
and new freshly created indexDB struct becomes `current`. So in any time,
VM holds indexDB for current and previous retention periods.
When time series is ingested or queried, VM checks if its TSID is present
in `current` indexDB. If it is missing, it checks the `previous` indexDB.
If TSID was found, it gets copied to the `current` indexDB. In this way
`current` indexDB stores only series which were active during the retention
period.
To improve indexDB lookups, VM uses a cache layer called `tsidCache`. Both
write and read path consult `tsidCache` and on miss the relad lookup happens.
When rotation happens, VM resets the `tsidCache`. This is needed for ingestion
path to trigger `current` indexDB re-population. Since index re-population
requires additional resources, every index rotation event may cause some extra
load on CPU and disk. While it may be unnoticeable for most of the cases,
for systems with very high number of unique series each rotation may lead
to performance degradation for some period of time.
This PR makes an attempt to smooth out resource usage after the rotation.
The changes are following:
1. `tsidCache` is no longer reset after the rotation;
2. Instead, each entry in `tsidCache` gains a notion of indexDB to which
they belong;
3. On ingestion path after the rotation we check if requested TSID was
found in `tsidCache`. Then we have 3 branches:
3.1 Fast path. It was found, and belongs to the `current` indexDB. Return TSID.
3.2 Slow path. It wasn't found, so we generate it from scratch,
add to `current` indexDB, add it to `tsidCache`.
3.3 Smooth path. It was found but does not belong to the `current` indexDB.
In this case, we add it to the `current` indexDB with some probability.
The probability is based on time passed since the last rotation with some threshold.
The more time has passed since rotation the higher is chance to re-populate `current` indexDB.
The default re-population interval in this PR is set to `1h`, during which entries from
`previous` index supposed to slowly re-populate `current` index.
The new metric `vm_timeseries_repopulated_total` was added to identify how many TSIDs
were moved from `previous` indexDB to the `current` indexDB. This metric supposed to
grow only during the first `1h` after the last rotation.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/promscrape: support prometheus-like duration in scrape configs
The change allows to specify duration values like `1d`, `1w`
for fields `scrape_interval`, `scrape_timeout`, etc.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/817#issuecomment-1033384766
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/blockcache: make linter happy
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/promscrape: support prometheus-like duration in scrape configs
* add support for extra fields `scrape_align_interval` and `scrape_offset`;
* support Prometheus duration parsing for `__scrape_interval__`
and `__scrape_duration__` labels;
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
* wip
* docs/CHANGELOG.md: document the feature
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* fixes service discovery for kubernetes
now it must take in account all pods that belong to the discovered endpoint and endpointslice
adds simple test for endpoints
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2134
* wip
* docs/CHANGELOG.md: document the change
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This should improve data ingestion speed if time series samples are ingested with interval bigger than 2 minutes.
The actual interval could exceed 2 minutes if the original interval between samples doesn't exceed 2 minutes
in the case of slow inserts. Slow inserts may appear in the following cases:
* Big number of new time series are pushed to VictoriaMetrics, so they couldn't be registered in 2 minutes.
* MetricName->tsid cache reset on indexdb rotation or due to unclean shutdown.
In this case VictoriaMetrics needs to load MetricName->tsid entries for all the incoming series from IndexDB.
IndexDB uses the block cache for increasing lookup performance. If the cache has no the needed block,
then IndexDB reads and unpacks the block from disk. This requires an extra disk read IO and CPU.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2007
This also should increase performance for periodically executed queries with intervals from 2 minutes to 5 minutes.
See the previous similar commit - 43103be011
It is possible that the timeout can be increased further. Let's collect production numbers for this change
so the timeout could be adjusted further.
Previously limits for new caches were taken from cache stats.
These limits could mismatch the original limits. This could result in failed cache load
if the stored cache has been created with the limits obtained from cache stats.
This metric shows the number of CPU cores available to the process.
This allows creating alerting rules on CPU saturation with the following query:
rate(process_cpu_seconds_total[5m]) / process_cpu_cores_available > 0.9
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2107
* optimized code ,because only the first error,so no need var errors []error
* optimized code ,because only the first error,so no need var errors []error
Co-authored-by: lirenzuo <lirenzuo@shein.com>
Previously bytesutil.Resize() was copying the original byte slice contents to a newly allocated slice.
This wasted CPU cycles and memory bandwidth in some places, where the original slice contents wasn't needed
after slize resizing. Switch such places to bytesutil.ResizeNoCopy().
Rename the original bytesutil.Resize() function to bytesutil.ResizeWithCopy() for the sake of improved readability.
Additionally, allocate new slice with `make()` instead of `append()`. This guarantees that the capacity of the allocated slice
exactly matches the requested size. The `append()` could return a slice with bigger capacity as an optimization for further `append()` calls.
This could result in excess memory usage when the returned byte slice was cached (for instance, in lib/blockcache).
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2007
- Optimize Cache.RemoveBlocksFromPart(), so it doesn't need to iterate over all the cached blocks.
- Cache blocks if there were no cache misses during the last 2 minutes.
This may be the case when new blocks are added simultaneously to the storage and to the cache.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2007
Previously these caches could exceed limits set via `-memory.allowedPercent` and/or `-memory.allowedBytes`,
since limits were set independently per each data part. If the number of data parts was big, then limits could be exceeded,
which could result to out of memory errors.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2007
- Document the bugfix at docs/CHANGELOG.md
- Set __address__ field after copying commonLabels to the resulting map of discovered labels.
This makes sure that the correct __address__ label is used.
* vmagent: add error log for skipped data block when rejected by receiving side
Previously, rejected data blocks were silently dropped - only metrics were update.
From operational perspective, having an additional logging for such cases is preferable.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1911
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmagent: throttle log messages about skipped blocks
The new type of logger was added to logger pacakge.
This new type supposed to control number of logged messages
by time.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/logger: make LogThrottler public, so its methods can be inspected by external packages
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This should handle the case when the original job_name has been changed in -promscrape.config ,
while the resulting job label remains the same because it is overriden via relabeling.
For example, `{__graphite__=~"foo.(bar|baz)"}` is automatically converted to `{__graphite__=~"foo.{bar,baz}"}` before execution.
This allows using multi-value Grafana template variables such as `{__graphite__=~"foo.($app)"}`.
* feat: change duration by "enter"
* fix: optimize data processing for chart
* feat: set minimum step to 1ms
* update dependencies
* feat: remove save the last query to local storage
* fix: handle an error in a table with subqueries
* feat: store display type in URL
* Revert "feat: store display type in URL"
This reverts commit ccc242c69a.
* feat: store display type in URL
* refactor: move the time setting to a folder
* refactor: move the query configurator to a folder
* refactor: move the auth settings to a folder
* feat: improve styles
* feat: add multi query
* update package-lock
* feat: add display multiple queries
* feat: add limits for multiple queries
* update dependencies
* feat: add history for multiple queries
* feat: add line type to legend
* feat: change style for switch
* feat: change the logic for axes limits for multiple queries
* update package-lock.json
* update dependencies
* feat: add the filter to legend
* wip
* lib/httpserver: add missing 127.0.0.1 hostname to the logged address for http and pprof server if the address starts with ':'
This allows copy-pasting the url to http server from logs.
* lib/httpserver: add missing 127.0.0.1 hostname to the logged address for http and pprof server if the address starts with ':'
This allows copy-pasting the url to http server from logs.
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* Document the ability to specify http or https urls in `-auth.config` at docs/CHANGELOG.md
* Move the ReadFileOrHTTP to lib/fs, so it can be re-used in other places where a file
should be read from the given path. For example, in `-promscrape.config` at `vmagent`.
The vm_cache_size_max_bytes metric can be used for determining caches which reach their capacity via the following query:
vm_cache_size_bytes / vm_cache_size_max_bytes > 0.9
* removes FileSize from backup part key
it should fix download restoration for backups
* Update lib/backup/common/part.go
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Previously only the lower part of 64-bit hash was used for calculating the offset.
This may give uneven distribution in some cases. So let's use all the available 64 bits from the hash
for calculating the offset.
Do not store in memory the response from the last scrape per each target if -promscrape.noStaleMarkers option is enabled.
This should reduce memory usage when the scraped targets return large responses.
* adds tab as second separator for graphite text protocol
* changes indexFunc for indexAny
* Update lib/protoparser/graphite/parser_test.go
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This should make visible the set flags at flag.Visit(), which is used later for logging
and exporting the `is_set` label for these flags at /metrics page
Stream parsing mode can be automatically enabled when scraping targets with big response bodies
exceeding the -promscrape.minResponseSizeForStreamParse , so it must be always initialized.
This allows sending staleness marks and properly calculate scrape_series_added metric in stream parsing mode
at the cost of the increased memory usage, since now the potentially big response is kept
in the lastScrape byte slice per each scrapeWork.
In practice the memory usage increase shouldn't be big, since the response size
is usually much smaller than the parsed metrics from this response after the relabeling,
which usually adds a big pile of target-specific labels per each metric.
* adds read-only mode for vmstorage
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/269
* changes order a bit
* moves isFreeDiskLimitReached var to storage struct
renames functions to be consistent
change protoparser api - with optional storage limit check for given openned storage
* renames freeSpaceLimit to ReadOnly
Also reduce CPU usage when applying `series_limit` to scrape targets with constant set of metrics.
The main idea is to perform the calculations on scrape_series_added and series_limit
only if the set of metrics exposed by the target has been changed.
Scrape targets rarely change the set of exposed metrics,
so this optimization should reduce CPU usage in general case.
These actions simlify metrics filtering. For example,
- action: keep_metrics
regex: 'foo|bar|baz'
would leave only metrics with `foo`, `bar` and `baz` names, while the rest of metrics will be deleted.
The commit also makes possible to split long regexps into multiple lines. For example, the following config is equivalent to the config above:
- action: keep_metrics
regex:
- foo
- bar
- baz
The number of series per target can be limited with the following options:
* Global limit with `-promscrape.maxSeriesPerTarget` command-line option.
* Per-target limit with `max_series: N` option in `scrape_config` section.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1561
Store the scraped response body instead of storing the parsed and relabeld metrics.
This should reduce memory usage, since the response body takes less memory than the parsed and relabeled metrics.
This is especially true for Kubernetes service discovery, which adds many long labels for all the scraped metrics.
This should also reduce CPU usage, since the marshaling of the parsed
and relabeld metrics has been substituted by response body copying.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1526
This option allows reducing CPU usage a bit when VictoriaMetrics is used
for collecting and processing non-Prometheus data. For example, InfluxDB line protocol, Graphite, OpenTSDB, CSV, etc.
This option can be useful when vmagent consumes too much additional memory
for staleness markers functionality and when staleness markers aren't needed.
* feature: Add multitenant for vmagent
* Minor fix
* Fix rcs index out of range
* Minor fix
* Fix multi Init
* Fix multi Init
* Fix multi Init
* Add default multi
* Adjust naming
* Add TenantInserted metrics
* Add TenantInserted metrics
* fix: remove unused metrics for vmagent
* fix: remove unused metrics for vmagent
Co-authored-by: mghader <marc.ghader@ubisoft.com>
Co-authored-by: Sebastian YEPES <syepes@gmail.com>
* Rename -search.maxMetricsPointSearch to -search.maxSamplesPerQuery, so it is more consistent with the existing -search.maxSamplesPerSeries
* Move the -search.maxSamplesPerQuery from vmstorage to vmselect, so it could effectively limit the number of raw samples obtained from all the vmstorage nodes
* Document the -search.maxSamplesPerQuery in docs/CHANGELOG.md
Previously the switch occurred when the cache size becomes 100% of its capacity. The cache size could never reach 100% capacity.
This could prevent from switching from the split cache to full cache, thus reducing the cache effectiveness.
Previously needsDedup() could return true if the de-duplication wasn't needed for the following case:
d < interval
/ \
| v | v |
interval interval
Now it properly returns false for this case
This reverts commit 7c6d3981bf.
Reason for revert: high contention at bucket16Pool on systems with big number of CPU cores.
This slows down query processing significantly.
This should reduce memory usage on systems with big number of CPU cores,
since every inmemoryPart object occupies at least 64KB of memory and sync.Pool maintains
a separate pool inmemoryPart objects per each CPU core.
Though the new scheme for the pool worsens per-cpu cache locality, this should be amortized
by big sizes of inmemoryPart objects.
CPU and memory profiles show that the pool capacity for inmemoryBlock objects is too small.
This results in the increased load on memory allocation code in Go runtime.
Increase the pool capacity in order to reduce the load on Go runtime.
This should improve hit ratio for tagFiltersCache when big number of new time series are constantly registered
(aka high churn rate). This, in turn, should reduce CPU usage for queries over such time series.
Previously the stats for cache misses could be improperly counted, because it had inflated cache misses
if the entry was missing in the curr cache, but was existing in the prev cache.
The same applies to cache requests - they were inflated if the entry was missing in the curr cache.
Previously the switch from `split` to `whole` mode had been performed too early,
e.g. when the current cache size became bigger than 1/4 of the allowed cache size.
Now it is performed when the current cache size becomes bigger than 1/2 of the allowed cache size.
This change can reduce memory usage for data ingestion path when big number of active time series are ingested.
One minute cache timeout result in slower queries in some production workloads where the interval
between query execution is in the range 1 minute - 2 minutes.
This should reduce memory usage on a system with high number of active time series and a high churn rate.
One minute is enough for caching the blocks needed for repeated queries (e.g. alerting rules, recording rules and dashboard refreshes).
This should reduce memory usage for the pool on systems with big number of CPU cores.
The sync.Pool maintains per-CPU pools, so the total number of objects in the pool
is proportional to the number of available CPU cores. The channel limits the number
of pooled objects by its own capacity. This means smaller number of pooled objects on average.
This panic can be raised by the reverseProxy on aborted request to the backend.
So handle it (e.g. suppress) at reverseProxy.ServeHTTP call.
Do not suppress the panic at lib/httpserver generic HTTP handler,
since it may result in an inconsistent state left after the panicking handler.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1353
* new feature: relabel logging
Use scrape_configs[x].relabel_debug = true to log metric names inkl.
labels before and after relabeling. After relabeling related metrics
get dropped, i.e. not submitted to servers.
* vminsert wants relabel logging, too.
The pool for inmemoryBlock struct doesn't give any performance gains in production workloads,
while it may result in excess memory usage for inmemoryBlock structs inside the pool during
background merge of indexdb.
This speeds up bucket32.addBucketAtPos() when bucket32.buckets contains big number of items,
since the copying of bucket16 pointers is much faster than the copying of bucket16 objects.
This is a cpu profile for copying bucket16 objects:
10ms 13.43s (flat, cum) 32.01% of Total
10ms 120ms 650: b.b16his = append(b.b16his[:pos+1], b.b16his[pos:]...)
. . 651: b.b16his[pos] = hi
. 13.31s 652: b.buckets = append(b.buckets[:pos+1], b.buckets[pos:]...)
. . 653: b16 := &b.buckets[pos]
. . 654: *b16 = bucket16{}
. . 655: return b16
. . 656:}
This is a cpu profile for copying pointers to bucket16:
10ms 1.14s (flat, cum) 2.19% of Total
. 100ms 647: b.b16his = append(b.b16his[:pos+1], b.b16his[pos:]...)
. . 648: b.b16his[pos] = hi
10ms 700ms 649: b.buckets = append(b.buckets[:pos+1], b.buckets[pos:]...)
. 330ms 650: b16 := &bucket16{}
. . 651: b.buckets[pos] = b16
. . 652: return b16
. . 653:}
Previously the blocked directories were removed sequentially by a single goroutine.
This can be not enough for highly loaded VictoriaMetrics that accepts millions of sample per second,
when big number of LSM parts are created and removed at high rate.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1313
These numbers are exposed via the following metrics:
- vmagent_hourly_series_limit_current_series
- vmagent_daily_series_limit_current_series
Expose also the limits via the following metrics:
- vmagent_hourly_series_limit_max_series
- vmagent_daily_series_limit_max_series
