Prevent excessive resource usage when stream aggregation config file
contains no matchers by prevent pushing data into Aggregators object.
Before this change a lot of extra work was invoked without reason.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 7ce052b32d)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* adds datadog extensions for statsd:
- multiple packed values (v1.1)
- additional types distribution, histogram
* adds type check and append metric type to the labels with special tag
name `__statsd_metric_type__`. It simplifies streaming aggregation
config.
* remove statsd support from cluster, since cluster doesn't support
stream aggregation.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit b2765c45d0)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Change the return values for these functions - now they return the unmarshaled result plus
the size of the unmarshaled result in bytes, so the caller could re-slice the src for further unmarshaling.
This improves performance of these functions in hot loops of VictoriaLogs a bit.
Added `rate` and `rate_avg` output
Resource usage is the same as for increase output, tested on a benchmark
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 9c3d44c8c9)
* FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent.html):
allow configuring `-remoteWrite.disableOnDiskQueue` and
`-remoteWrite.dropSamplesOnOverload` cmd-line flags per each
`-remoteWrite.url`. See this [pull
request](https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6065).
Thanks to @rbizos for implementaion!
* FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent.html): add
labels `path` and `url` to metrics
`vmagent_remotewrite_push_failures_total` and
`vmagent_remotewrite_samples_dropped_total`. Now number of failed pushes
and dropped samples can be tracked per `-remoteWrite.url`.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Raphael Bizos <r.bizos@criteo.com>
(cherry picked from commit 87fd400dfc)
Set correct suffix `<output>_prometheus` for aggregation outputs
`increase_prometheus` and `total_prometheus`
Before, outputs `total` and `total_prometheus` or `increase` and
`increase_prometheus` had the same suffix.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 8a03e987cb)
Though labels compressor is quite resource intensive, each aggregator
and deduplicator instance has it's own compressor. Made it shared across
all aggregators to consume less resources while using multiple
aggregators.
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
(cherry picked from commit a9283e06a3)
### Describe Your Changes
related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6041
#### Added
- Added service discovery support for Vultr.
#### Docs
- `CHANGELOG.md`, `sd_configs.md`, `vmagent.md` are updated.
#### Note
- Useful links:
- Vultr API:
https://www.vultr.com/api/#tag/instances/operation/list-instances
- Vultr client SDK: https://github.com/vultr/govultr
- Prometheus SD:
https://github.com/prometheus/prometheus/tree/main/discovery/vultr
---
### Checklist
The following checks are mandatory:
- [X] I have read the [Contributing
Guidelines](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/CONTRIBUTING.md)
- [x] All commits are signed and include `Signed-off-by` line. Use `git
commit -s` to include `Signed-off-by` your commits. See this
[doc](https://git-scm.com/book/en/v2/Git-Tools-Signing-Your-Work) about
how to sign your commits.
- [x] Tests are passing locally. Use `make test` to run all tests
locally.
- [x] Linting is passing locally. Use `make check-all` to run all
linters locally.
Further checks are optional for External Contributions:
- [X] Include a link to the GitHub issue in the commit message, if issue
exists.
- [x] Mention the change in the
[Changelog](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/docs/CHANGELOG.md).
Explain what has changed and why. If there is a related issue or
documentation change - link them as well.
Tips for writing a good changelog message::
* Write a human-readable changelog message that describes the problem
and solution.
* Include a link to the issue or pull request in your changelog message.
* Use specific language identifying the fix, such as an error message,
metric name, or flag name.
* Provide a link to the relevant documentation for any new features you
add or modify.
- [ ] After your pull request is merged, please add a message to the
issue with instructions for how to test the fix or try the feature you
added. Here is an
[example](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4048#issuecomment-1546453726)
- [x] Do not close the original issue before the change is released.
Please note, in some cases Github can automatically close the issue once
PR is merged. Re-open the issue in such case.
- [x] If the change somehow affects public interfaces (a new flag was
added or updated, or some behavior has changed) - add the corresponding
change to documentation.
Signed-off-by: Jiekun <jiekun.dev@gmail.com>
(cherry picked from commit 17e3d019d2)
This code adds Exemplars to VMagent and the promscrape parser adhering
to OpenMetrics Specifications. This will allow forwarding of exemplars
to Prometheus and other third party apps that support OpenMetrics specs.
---------
Signed-off-by: Ted Possible <ted_possible@cable.comcast.com>
(cherry picked from commit 5a3abfa041)
Add test to cover the code path with overflowing shards buffers and
triggering merge to partition.
This test covers the code path which leaded to
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5959
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit 329c3cbdf0)
The new flag type is supposed to be used for specifying URL values which
could contain sensitive information such as auth tokens in GET params or
HTTP basic authentication.
The URL flag also allows loading its value from files if `file://`
prefix is specified. As example, the new flag type was used in
app/vmbackup as it requires specifying `authKey` param for making the
snapshot.
See related issue
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5973
Thanks to @wasim-nihal for initial implementation
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6060
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 029060af60)
Stream aggregation may yield inaccurate results if it processes incomplete data.
This issue can arise when data is sourced from clients that maintain a queue of unsent data, such as Prometheus or vmagent.
If the queue isn't fully cleared within the aggregation interval, only a portion of the time series may be included in that period, leading to distorted calculations.
To mitigate this we add an option to ignore first N aggregation intervals. It is expected, that client queues
will be cleared during the time while aggregation ignores first N intervals and all subsequent aggregations
will be correct.
(cherry picked from commit c0e4ccb7b5)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Using plain sync.Pool simplifies the code without increasing memory usage and CPU usage.
So it is better to use plain sync.Pool from readability and maintainability PoV.
This is a follow-up for 8942f290eb
It is incorrect applying the limit on the number of values to search without applying filters,
since the returned subset of label values may miss the label values matching the given filters.
This is a follow-up for 66630c7960
This speeds up auto-suggestion for metric names in VMUI and Grafana, which use the following query in this case:
/api/v1/label/__name__/values?match[]={__name__=~"*.some_value.*"}
When the user types `some_value` in the query input field.
This should improve debuggability of unexpected deletion of directories inside partitions.
While at it, log the proper path to parts.json when the directory for big part is missing in the partition.
parts.json is located inside directory with small parts, and there is no parts.json file inside directory with big parts.
