* lib/vmselectapi: do not send empty label names for labelNames request
it breaks cluster communication, since vmselect incorrectly reads request buffer, leaving unread data on it
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4932
* typo fix
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* feat: add cardinality support for prometheus (#4320)
* docs/CHANGELOG.md: add cardinality support for prometheus
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* added ability to set and clear response headers (#4825)
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* added ability to set and clear response headers (#4825)
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fix review comment
Signed-off-by: Alexander Marshalov <_@marshalov.org>
---------
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* app/vminsert: fixes readonly check
previously vminsert doesn't check readOnly state for vmstorage, since check was never performed for nil buffer
In this case every 30 second storage node loss readonly state and received some data.
It caused re-routing and possible slow down for ingestion
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4870
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
app/vmselect: fix panic when using `/select/multitenant` endpoint
Such requests must be rejected as not found since vmselect does not support multitenant endpoint.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4910
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* deployment/docker: disable provenance in buildx
it must fix an issue with multi-platform manifest generation
at buildx >= 0.10 backward compatibility was broken and generated image cannot be used with docker systems that doesn't support oci.
disabling attestat temporary fixes it.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4907https://docs.docker.com/build/attestations/slsa-provenance/
* Update docs/CHANGELOG.md
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Document the change at docs/CHANGELOG.md
- Set the default value for -vmstorageUserTimeout to 3 seconds. This is much better
than the 0 value, which means that TCP connection to unreachable vmstorage could block
for up to 16 minutes.
- Document -vmstorageUserTimeout at docs/Cluster-VictoriaMetrics.md
Initially, stream parse mode was reading data from response and parsing it on flight. This was causing longer delay to read the whole response and required increasing timeout value to allow data processing while reading. So that 908e35affd increased timeout value to fix this.
But after 74c00a8762 response in stream parse mode is saved into memory and then parsed eliminating necessity of having timeout value higher that for usual scrape.
Updates: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4847
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* vmagent: retry failed write request on the closed connection
Retry failed write request on the closed connection immediately,
without waiting for backoff. This should improve data delivery speed
and reduce amount of error logs emitted by vmagent when using idle connections.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4139
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmagent: retry failed write request on the closed connection
Re-instantinate request before retry as body could have been already spoiled.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* vmalert: correctly re-instantinate HTTP req on retries
Previosly, request retry to datasource re-used existing HTTP request.
But if request object was already partially processed (body was read),
then retry will be unsuccessful.
The change re-instantinates HTTP request object before retry.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: review fix
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Add button to prettify query
Just capitalizes query text for now
* Add /prettify-query API handler
* Replace UI pretiffier using prettifier API
* Add showing server errors
Had to pass setQueryErrors from useFetchQuery.ts
* Use serverUrl from global AppState
* Change icon to AutoAwsome icon + added style change color when button is active
* Add sync/await to prettifyQuery function
* Doc public function for lint
* Minor async fix
* Removed extra blank lines
* Extract usePrettifyQuery hook
* Made more generic style for :active button
* Refactor usePrettifyQuery
However, prettify errors don't clean up query errors, but should
* Add prettyQuery functionality to CHANGELOG.md
* Reuse queryErrors
* Unhide errors on start
---------
Co-authored-by: Tamara <toma.vashchuk@gmail.com>
exclude assets/README.md from publishing on the docs website
as its purpose is different to other docs.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This reverts commit 251d3d54a4.
Reason for revert: this commit removes important information, which was placed in the docs/assets folder
in order to reduce the probability of putting images related to particular docs here,
with the reasoning why this is a bad practice.
This information should remain in the docs/assets folder. Probably, the file should be renamed
from README.md to README or to some other visible name, which doesn't lead to generation of unneded
documentation for the assets folder.
app/vmctl: don't interrupt migration process if tenant has no data
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Alexander Marshalov <_@marshalov.org>
vmagent: properly add extra labels before sending data to remote storage
labels from `remoteWrite.label` are now added to sent metrics just before they
are pushed to `remoteWrite.url` after all relabelings, including stream aggregation relabelings (#4247)
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4247
Signed-off-by: Alexander Marshalov <_@marshalov.org>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Fix display of ingested rows rate for `Samples ingested/s`
and `Samples rate` panels for vmagent's dasbhoard.
Previously, not all ingested protocols were accounted in these panels.
An extra panel `Rows rate` was added to `Ingestion` section to display the split
for rows ingested rate by protocol.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Opentelemetry format allows histograms with non-counter buckets. In this case it makes no sense to add buckets into database
and save only counter with _count suffix.
It could be used as gauge.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4814
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vlinsert/elasticsearch: add a command-line flag to provide ES version
Adds a flag which will allow to change version which will be reported by ES endpoint for compatibility checks performed by external logs shippers(such as filebeat).
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4777
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Document the -elasticsearch.version command-line flag
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4777
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/promrelabel: fix relabeling if clause being applied to labels outside of current context
Relabeling is applied to each metric row separately, but in order to lower amount of memory allocations it is reusing labels.
Functions which are working on current metric row labels are supposed to use only current metric labels by using provided offset, but if clause matcher was using the whole labels set instead of local metrics.
This leaded to invalid relabeling results such as one described here: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4806
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/CHANGELOG.md: document the bugfix
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1998
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4806
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This reverts commit 252643d100.
Reason for revert: the commit incorrectly fixes the the issue.
The `remoteAddr` must be properly quoted inside lib/httpserver.GetQuotedRemoteAddr().
It isn't quoted properly if the request contains X-Forwarded-For header.
The proper fix will be included in the follow-up commit.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4676
{vmagent/remotewrite,vminsert/common}: fix dropInput and keepInput flags inconsistency
Sync behavior for dropInput and keepInput flags between single-node and vmagent.
Fix vmagent not respecting dropInput flag and reverse logic for keepInput.
* rename `configErr` to `lastConfigErr` to reduce confusion
* add tests to verify metrics and msg are set properly
* fix mistake when config success metric wasn't restored after an error
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Value of `-dedup.minScrapeInterval` comand-line flag must be higher than `evaluation_interval` in order to make sure that only one sample on each evaluation will be left after deduplication.
Moreover, value of `-dedup.minScrapeInterval` must be a multiple of vmalert's `evaluation_interval` in order to make sure that samples will be aligned between deduplication window periods.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4774#issuecomment-1663940811
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Correctly calculate `Bytes per point` value for single-server and cluster VM dashboards.
Before, the calculation mistakenly accounted for the number of entries in indexdb in
denominator, which could have shown lower values than expected.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The `ConcurrentFlushesHitTheLimit` could be related to components like
vminsert, vmstorage, vm-single-node and vmagent. Moving this alert
to the `health` section of alerts will be benefitial for all components
and will remove the duplicates from single/cluster alerts.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The new panel supposed to show whether the number of concurrent
inserts processed by vmagent isn't reaching the limit.
The panel contains recommendation what to do if limit is reached.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Binary export API protocol can be disabled via `-vm-native-disable-binary-protocol` cmd-line flag when migrating data from VictoriaMetrics. Disabling binary protocol
can be useful for deduplication of the exported data before ingestion.
For this, deduplication need to be configured at `-vm-native-src-addr` side
and `-vm-native-disable-binary-protocol` should be set on vmctl side.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Links of form `/api/v1/<groupID>/<alertID>/status` were deprecated
in favour of `/api/v1/alerts?group_id=<>&alert_id=<>` links in
v1.79.0. See more details here https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2825
This change removes code responsible for deprecated functionality.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Adding anchors to the 1.92 changelog breaks consistency
of navigation section at https://docs.victoriametrics.com/CHANGELOG.html
All other releases do not have subsections, so should 1.92.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "vmalert: unittest support stale datapoint (#4696)"
This reverts commit 0b44df7ec8.
* Revert "docs: specify min version and limitations for vmalert's unit tests"
This reverts commit a24541bd
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "vmalert: init unit test (#4596)"
This reverts commit da60a68d
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docs: mention unittest revert in changelog
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/protoparser: adds opentelemetry parser
app/{vmagent,vminsert}: adds opentelemetry ingestion path
Adds ability to ingest data with opentelemetry protocol
protobuf and json encoding is supported
data converted into prometheus protobuf timeseries
each data type has own converter and it may produce multiple timeseries
from single datapoint (for summary and histogram).
only cumulative aggregationFamily is supported for sum(prometheus
counter) and histogram.
Apply suggestions from code review
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
updates deps
fixes tests
wip
wip
wip
wip
lib/protoparser/opentelemetry: moves to vtprotobuf generator
go mod vendor
lib/protoparse/opentelemetry: reduce memory allocations
* wip
- Remove support for JSON parsing, since it is too fragile and is rarely used in practice.
The most clients send OpenTelemetry metrics in protobuf.
The JSON parser can be added in the future if needed.
- Remove unused code from lib/protoparser/opentelemetry/pb and lib/protoparser/opentelemetry/proto
- Do not re-use protobuf message between ParseStream() calls, since there is high chance
of high fragmentation of the re-used message because of too complex nested structure of the message.
* wip
* wip
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
The important change is to highlight that restore procedure happens
only once and only for already loaded rules. Config hot-reload
doesn't trigger the restore procedure.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Add -remoteWrite.shardByURL command-line flag, which instructs vmagent to spread evenly
outgoing time series data among the configured remote storage systems specified via -remoteWrite.url .
Samples for the same time series go to the same -remoteWrite.url . This allows building horizontally
scalable stream aggregation when samples for counter and histogram series must be aggregated
by the same second-level vmagent instance.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4637
- Use a byte slice instead of a map for tracking indexes for matching series.
This improves performance, since access by slice index is faster than access by map key.
- Re-use the byte slice for tracking indexes for matching series.
This removes unnecessary memory allocations and improves stream aggregation performance a bit.
- Add an ability to return to the previous behvaiour by specifying -remoteWrite.streamAggr.dropInput command-line flag.
In this case all the input samples are dropped when stream aggregation is enabled.
- Backport the new stream aggregation behaviour from vmagent to single-node VictoriaMetrics when -streamAggr.config
option is set.
- Improve docs regarding this change at docs/CHANGELOG.md
- Document the new behavior at docs/stream-aggregation.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4243
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4575
* {lib/streamaggr,vmagent/remotewrite}: breaking change for keepInput flag
Changes default behaviour of keepInput flag to write series which did not match any aggregators to the remote write.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4243
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Update app/vmagent/remotewrite/remotewrite.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/storage: pre-create timeseries before indexDB rotation
during an hour before indexDB rotation start creating records at the next indexDB
it must improve performance during switch for the next indexDB and remove ingestion issues.
Since there is no need for creation new index records for timeseries already ingested into current indexDB
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4563
* lib/storage: further work on indexdb rotation optimization
- Document the change at docs/CHAGNELOG.md
- Move back various caches from indexDB to Storage. This makes the change less intrusive.
The dateMetricIDCache now takes into account indexDB generation, so it stores (date, metricID)
entries for both the current and the next indexDB.
- Consolidate the code responsible for idbNext pre-filling into prefillNextIndexDB() function.
This improves code readability and maintainability a bit.
- Rewrite and simplify the code responsible for calculating the next retention timestamp.
Add various tests for corner cases of this code.
- Remove indexdb pre-filling from RegisterMetricNames() function, since this function is rarely called.
It is OK to add indexdb entries on demand in this function. This simplifies the code.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
* docs/CHANGELOG.md: refer to https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4563
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vmalert/datasource/graphite: allow overriding "from" parameter for datasource queries
Fixes construction of URL parameters for graphite render to allow overriding "from" parameter.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4685
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmalert/datasource/graphite: update flow for building URL parameters
Makes flow of building URL parameters same as Prometheus datasource has:
1) Setting all default values
2) Merging those values with provided `extraParams`
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Update docs/CHANGELOG.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
- Improve docs
- Hide `debug relabeling` column when -promscrape.dropOriginalLabels command-line flag is set
- Inline the code from the added template functions, since the code is harder to follow
with the template functions, especially when these functions have misleading names.
Also, these functions are used only in one place, e.g. they do not reduce the amounts of code.
- Hide `click to show original labels` title at `labels` column when original labels aren't available.
- Show the reason on whey original labels aren't available at /service-discovery page.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4597
- Parse protobuf if Content-Type isn't set to `application/json` - this behavior is documented at https://grafana.com/docs/loki/latest/api/#push-log-entries-to-loki
- Properly handle gzip'ped JSON requests. The `gzip` header must be read from `Content-Encoding` instead of `Content-Type` header
- Properly flush all the parsed logs with the explicit call to vlstorage.MustAddRows() at the end of query handler
- Check JSON field types more strictly.
- Allow parsing Loki timestamp as floating-point number. Such a timestamp can be generated by some clients,
which store timestamps in float64 instead of int64.
- Optimize parsing of Loki labels in Prometheus text exposition format.
- Simplify tests.
- Remove lib/slicesutil, since there are no more users for it.
- Update docs with missing info and fix various typos. For example, it should be enough to have `instance` and `job` labels
as stream fields in most Loki setups.
- Allow empty of missing timestamps in the ingested logs.
The current timestamp at VictoriaLogs side is then used for the ingested logs.
This simplifies debugging and testing of the provided HTTP-based data ingestion APIs.
The remaining MAJOR issue, which needs to be addressed: victoria-logs binary size increased from 13MB to 22MB
after adding support for Loki data ingestion protocol at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4482 .
This is because of shitty protobuf dependencies. They must be replaced with another protobuf implementation
similar to the one used at lib/prompb or lib/prompbmarshal .
* app/vmagent: fix creating target id if `--promscrape.dropOriginalLabels` flag was used
* app/vmagent: hide links if OriginalLabels was dropped
* app/vmagent: update CHANGELOG.md and added information to the docs
* app/vmagent: fix comments
* app/vlinsert: add support of loki push protocol
- implemented loki push protocol for both Protobuf and JSON formats
- added examples in documentation
- added example docker-compose
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vlinsert: move protobuf metric into its own file
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* deployment/docker/victorialogs/promtail: update reference to docker image
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* deployment/docker/victorialogs/promtail: make volume name unique
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vlinsert/loki: add license reference
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* deployment/docker/victorialogs/promtail: fix volume name
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/VictoriaLogs/data-ingestion: add stream fields for loki JSON ingestion example
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vlinsert/loki: move entities to places where those are used
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vlinsert/loki: refactor to use common components
- use CommonParameters from insertutils
- stop ingestion after first error similar to elasticsearch and jsonline
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vlinsert/loki: address review feedback
- add missing logstorage.PutLogRows calls
- refactor tenant ID parsing to use common function
- reduce number of allocations for parsing by reusing logfields slices
- add tests and benchmarks for requests processing funcs
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
- Add `Active queries` chapter to VMUI docs
- Set `Content-Type: json` header inside promql.WriteActiveQueries() handler,
in order to be consistent with other request handlers called at app/vmselect/main.go
- Pass the request to promql.WriteActiveQueries() handler, so it can change its output
depending on the provided request params. This also improves consistency of
promql.WriteActiveQueries() args with other request hanlers at app/vmselect/main.go
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4653
* feat: add page to display a list of active queries (#4598)
* app/vmagent: code formatting
* fix: remove console
---------
Co-authored-by: dmitryk-dk <kozlovdmitriyy@gmail.com>
The following syntax is supported: _time:filter offset off
For example:
- _time:5m offset 1h - 5-minute duration one hour before the current time
- _time:2023 offset 2w - 2023 year with the 2 weeks offset in the past
The `a op b keep_metric_names` is ambigouos to `a op (b keep_metric_names)` when `b` is a transform or rollup function.
For example, `a + rate(b) keep_metric_names`. So it is better to use more clear syntax: `(a op b) keep_metric_names`
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3710
* metricsql: add support of using keep_metric_names for binary operations
This should help to avoid confusion with queries like one in the issue #3710.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* wip
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Previously all the newly ingested time series were registered in global `MetricName -> TSID` index.
This index was used during data ingestion for locating the TSID (internal series id)
for the given canonical metric name (the canonical metric name consists of metric name plus all its labels sorted by label names).
The `MetricName -> TSID` index is stored on disk in order to make sure that the data
isn't lost on VictoriaMetrics restart or unclean shutdown.
The lookup in this index is relatively slow, since VictoriaMetrics needs to read the corresponding
data block from disk, unpack it, put the unpacked block into `indexdb/dataBlocks` cache,
and then search for the given `MetricName -> TSID` entry there. So VictoriaMetrics
uses in-memory cache for speeding up the lookup for active time series.
This cache is named `storage/tsid`. If this cache capacity is enough for all the currently ingested
active time series, then VictoriaMetrics works fast, since it doesn't need to read the data from disk.
VictoriaMetrics starts reading data from `MetricName -> TSID` on-disk index in the following cases:
- If `storage/tsid` cache capacity isn't enough for active time series.
Then just increase available memory for VictoriaMetrics or reduce the number of active time series
ingested into VictoriaMetrics.
- If new time series is ingested into VictoriaMetrics. In this case it cannot find
the needed entry in the `storage/tsid` cache, so it needs to consult on-disk `MetricName -> TSID` index,
since it doesn't know that the index has no the corresponding entry too.
This is a typical event under high churn rate, when old time series are constantly substituted
with new time series.
Reading the data from `MetricName -> TSID` index is slow, so inserts, which lead to reading this index,
are counted as slow inserts, and they can be monitored via `vm_slow_row_inserts_total` metric exposed by VictoriaMetrics.
Prior to this commit the `MetricName -> TSID` index was global, e.g. it contained entries sorted by `MetricName`
for all the time series ever ingested into VictoriaMetrics during the configured -retentionPeriod.
This index can become very large under high churn rate and long retention. VictoriaMetrics
caches data from this index in `indexdb/dataBlocks` in-memory cache for speeding up index lookups.
The `indexdb/dataBlocks` cache may occupy significant share of available memory for storing
recently accessed blocks at `MetricName -> TSID` index when searching for newly ingested time series.
This commit switches from global `MetricName -> TSID` index to per-day index. This allows significantly
reducing the amounts of data, which needs to be cached in `indexdb/dataBlocks`, since now VictoriaMetrics
consults only the index for the current day when new time series is ingested into it.
The downside of this change is increased indexdb size on disk for workloads without high churn rate,
e.g. with static time series, which do no change over time, since now VictoriaMetrics needs to store
identical `MetricName -> TSID` entries for static time series for every day.
This change removes an optimization for reducing CPU and disk IO spikes at indexdb rotation,
since it didn't work correctly - see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401 .
At the same time the change fixes the issue, which could result in lost access to time series,
which stop receving new samples during the first hour after indexdb rotation - see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698
The issue with the increased CPU and disk IO usage during indexdb rotation will be addressed
in a separate commit according to https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401#issuecomment-1553488685
This is a follow-up for 1f28b46ae9
* app/vmctl: fix panic `--remote-read-filter-time-start` flag not defined
* app/vmctl: update CHANGELOG.md
---------
Co-authored-by: Nikolay <nik@victoriametrics.com>
It could happen for low evaluation intervals and irregular
delays during execution that evaluation time would get
a negative offset. This could result into cumulative
discrepancy between the actual time and evaluation time for rules.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Clarify docs about -replicationFactor command-line flag at vmselect
- Clarify description for -replicationFactor and -search.skipSlowReplicas command-line flags
- Fix the logic for returning responses if -search.skipSlowReplicas command-line flag
is enabled. The logic was broken in the 173ccf4333,
so it could return responses only if some of vmstorage nodes return error,
while it should return when query results are successfully collected from more than
(len(storageNodes) - replicationFactor) vmstorage nodes.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1207
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/711
* vmselect: introduce `search.skipSlowReplicas` cmd-line flag
vmselect has two logical conditions during request processing when
`-replicationFactor` cmd-line flag is set:
1. If at least `len(storageNodes) - replicationFactor` responded, it could skip
waiting for the rest of nodes to respond. This could lead to problems described
here https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1207.
2. Mark response as partial if less than `len(storageNodes) - replicationFactor` responded
without an error.
The P1 showed itself error-prone and became the main reason why
`-replicationFactor` wasn't recommended to use at vmselect level.
However, this optimization could be still very useful in situations
when there are slow and fast replicas in cluster.
But P2 remains viable and important conditionless.
Hiding P1 behind the feature-flag `search.skipSlowReplicas`
should make `-replicationFactor` flag usable again. And let users
choose whether they want P1 to be respected.
Related issues
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1207https://github.com/VictoriaMetrics/VictoriaMetrics/issues/711
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docs: update changelog
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docs: make `httpAuth.*` flags description less ambiguous
Currently, it may confuse users whether `httpAuth.*` flags are used by HTTP client or server configuration(see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4586 for example).
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: fix a typo
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
vmalert: allow disabling of `step` param attached to instant queries
This might be useful for using vmalert with datasources that to not support this param,
unlike VictoriaMetrics.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4573
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* fix removing storage data dir before restoring from backup
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fix review comment
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fix review comment
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fixes after merge with `enterprise-single-node` branch
Signed-off-by: Alexander Marshalov <_@marshalov.org>
---------
Signed-off-by: Alexander Marshalov <_@marshalov.org>
- Clarify the scope of the fix at docs/CHANGELOG.md
- Handle the case when -search.maxSamplesPerSeries limit is exceeded
in the same way as the -search.maxSamplesPerQuery limit.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4472
The validation was needed for covering corner cases when storage is tested with data from 1970.
This resulted into unexpected search results, as year was parsed incorrectly from the given timestamp.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
It is required for periods to be multiplies, but it was not stated clearly in documentation.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
The change focuses on rectifying inconsistencies in the navigation behavior of the application
and eliminating issues encountered when manually altering the URL.
The key updates include:
- Refactoring of the routing mechanism to handle all possible routes and their states.
- Enhancement of the React Router usage to ensure a smoother navigation experience.
- Handling application state when the URL is manually changed.
Added a line for `probeSelector` and links to objects selectors section to make it easier to find more details about selectors.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
expose `vmauth_user_request_duration_seconds`
and `vmauth_unauthorized_user_request_duration_seconds` summary metrics
for measuring requests latency per user.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
It is impossible to run OS vmauth with the provided config.
The example of using ip filters should be only a part of docs.
All other examples should work seamlessly with OS version.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docs: add scroll to the selected element
* docs: scroll to root if element not found
* docs: simplify code
* docs: code cleanup
* docs: fix comments (fix code formatting, check element only inside sidebar container)
By default, vmalert will make multiple retry attempts with exponential delay.
The total time spent during retry attempts shouldn't exceed `-remoteWrite.retryMaxTime` (default is 30s).
When retry time is exceeded vmalert drops the data dedicated for `-remoteWrite.url`.
Before, vmalert dropped data after 5 retry attempts with 1s delay between attempts (not configurable).
See `-remoteWrite.retryMinInterval` and `-remoteWrite.retryMaxTime` cmd-line flags.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
This simplifies routing at auth proxies such as vmauth to vlselect component,
which serves VMUI - just route all the requests, which start with /select/, to vlselect.
If the `Content-Type: application/json` request header isn't set,
then the server can improperly consume the request body when parsing request parameters
vmalert: retry all errors except 4XX status codes
Retry all errors except 4XX status codes while pushing via remote-write
to the remote storage. Previously, errors like broken connection could
prevent vmalert from retrying the request.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* fix: optimize the preparation of data for the graph
* fix: optimize tooltip rendering
* fix: optimize re-rendering of the chart
* vmui: memory leak fix
* lib/storage: creates parts.json on start-up if it not exists.
It fixes migrations from versions below v1.90.0.
Previously parts.json was created only after successful merge.
But if merge was interruped for some reason (OOM or shutdown), parts.json wasn't created and partitions left after interruped merge weren't properly deleted.
Since VM cannot check if it must be removed or not.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4336
* Apply suggestions from code review
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* Update lib/storage/partition.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
app/vmagent/remotewrite: fix vmagent panic on shutdown
Currently, when vmagent is stopping it first flushes pending series in remote write context and proceeds to stop streaming aggregation. This leads to streaming aggregation being unable to write results into pending timeseries (since it is already nil) and panic.
This can lead to losing some aggregation results being lost almost silently.
The fix is reordering flow to first stop streaming aggregation and flush all pending time series after that.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmctl: add verbose output for docker installations or when TTY isn't available
* app/vmctl: fix tests
* app/vmctl: make vmctl interactive if no tty
* app/vmctl: cleanup
* app/vmctl: add comment
---------
Co-authored-by: Nikolay <nik@victoriametrics.com>
* vmalert: fix nil map assignment
The storage instance with nil map params was created for remote-read purposes.
And before change 7a9ae9de0d this map was ignored in ApplyParams.
Now, it started to be used and vmalert panics in runtime.
The fix properly inits map for at `NewVMStorage` and verifies it is not nil
on assignment in `ApplyParams`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add to changelog
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: properly clone Storage params
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: properly clone Storage params
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: properly clone Storage params
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The purpose of the change is too highlight what HA pair is
and how deduplication needs identical labels to be present
in raw samples.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4367
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This reverts the following commits:
- e0e16a2d36
- 2ce02a7fe6
The reason for revert: the updated logic breaks assumptions made
when fixing https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698 .
For example, if a time series stop receiving new samples during the first
day after the indexdb rotation, there are chances that the time series
won't be registered in the new indexdb. This is OK until the next indexdb
rotation, since the time series is registered in the previous indexdb,
so it can be found during queries. But the time series will become invisible
for search after the next indexdb rotation, while its data is still there.
There is also incompletely solved issue with the increased CPU and disk IO resource
usage just after the indexdb rotation. There was an attempt to fix it, but it didn't fix
it in full, while introducing the issue mentioned above. See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
TODO: to find out the solution, which simultaneously solves the following issues:
- increased memory usage for setups high churn rate and long retention (e.g. what the reverted commit does)
- increased CPU and disk IO usage during indexdb rotation ( https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401 )
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698
Possible solution - to create the new indexdb in one hour before the indexdb rotation
and to gradually pre-populate it with the needed index data during the last hour before indexdb rotation.
Then the new indexdb will contain all the needed data just after the rotation,
so it won't trigger increased CPU and disk IO.
- Document the change at docs/CHANGELOG.md
- Clarify comments for non-trivial code touched by the commit
- Improve the logic behind maybeCreateIndexes():
- Correctly create per-day indexes if the indexdb rotation is performed during
the first hour or the last hour of the day by UTC.
Previously there was a possibility of missing index entries on that day.
- Increase the duration for creating new indexes in the current indexdb for up to 22 hours
after indexdb rotation. This should reduce the increased resource usage
after indexdb rotation.
It is safe to postpone index creation for the current day until the last hour
of the current day after indexdb rotation by UTC, since the corresponding (date, ...)
entries exist in the previous indexdb.
- Search for TSID by (date, MetricName) in both the current and the previous indexdb.
Previously the search was performed only in the current indexdb. This could lead
to excess creation of per-day indexes for the current day just after indexdb rotation.
- Search for (date, metricID) entries in both the current and the previous indexdb.
Previously the search was performed only in the current indexdb. This could lead
to excess creation of per-day indexes for the current day just after indexdb rotation.
* added backup locking/unlocking against retention policy to vmbackupmanager
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* added docs for new commands
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fix review comments
Signed-off-by: Alexander Marshalov <_@marshalov.org>
---------
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* feat: improvement of the top queries page
* vmui/docs: enhancements to top queries page
* Apply suggestions from code review
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
vmui: change default font size to 14px for better readability
vmui: fix bug with missing text on buttons in safari
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* app/vmui: added Labels with the highest number of unique values
* app/vmui: cleanup
* app/vmui: cleanup
* app/vmui: add table description
* app/vmui: fix comment, updated CHANGELOG.md
* app/vmui: disable links
* app/vmui: added actions to the table, it will show values for selected label with the highest number of series
* app/vmui: fix comment
* vmalert: expand rule groups on anchor click
before, anchor click was only updating the URL.
To expand the group, user had to click on rule's block.
Now, group will toggle automatically.
* vmalert: allow filtering group in web UI
The new filter allows to filter groups and rules within
groups by: errors only or noMatch only.
The filtering supposed to help navigating big numbers of groups/rules.
Filtering is reflected in URL, so can be shared as a link.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Without reset, labels duplicates could have been added during stream aggregation.
Since `ctx.Labels` is reused during processing of many series, each series will
add its labels to the context. Even if the same labels were already addeded on prev
iteration. Now, we reset `ctx.Labels` on each iteration to contain so labels from
different series didn't interfere.
This could have cause exceeding of the limit on number of labels per pushed time series.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4277
Signed-off-by: hagen1778 <roman@victoriametrics.com>
app/vmalert: detect alerting rules which don't match any series at all
vmalert starts to understand /query responses which contain object:
```
"stats":{"seriesFetched": "42"}
```
If object is present, vmalert parses it and populates a new field
`SeriesFetched`. This field is then used to populate the new metric
`vmalert_alerting_rules_last_evaluation_series_fetched` and to
display warnings in the vmalert's UI.
If response doesn't contain the new object (Prometheus or
VictoriaMetrics earlier than v1.90), then `SeriesFetched=nil`.
In this case, UI will contain no additional warnings.
And `vmalert_alerting_rules_last_evaluation_series_fetched` will
be set to `-1`. Negative value of the metric will help to compile
correct alerting rule in follow-up.
Thanks for the initial implementation to @Haleygo
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4056
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4039
Signed-off-by: hagen1778 <roman@victoriametrics.com>
It appears that 90% usage for anonymous mem usage
is already concerning. So we lowering the threshold to 80%.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
When using `retentionTimezoneOffset` and having local timezone being more than 4 hours different from UTC indexdb retention calculation could return negative value. This caused indexdb rotation to get in loop.
Fix calculation of offset to use `retentionTimezoneOffset` value properly and add test to cover all legit timezone configs.
See:
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4207
- https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4206
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
Windows doesn't allow to remove dir with opened files. Usually it's a case for snapshots, hard cannot be removed if file is openned.
With this change, dir will be renamed and properly deleted at the next process start.
It's recommended to restart vmstorage/vmsingle for snapshots deletion completion periodically.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70
* lib/promscrape/discovery/kubernetes: add common labels to all ports discovered from endpoints
Sets
`__meta_kubernetes_endpoints_name` and `__meta_kubernetes_namespace` labels to all ports of pod.
Prometheus sets those labels to all ports in pod (0ab9553611/discovery/kubernetes/endpoints.go (L267C15-L269)) even if port is not matching any service.
See: #4154
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: fix test for updated discovery logic
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Properly return empty slices instead of nil for `/api/v1/rules` and `/api/v1/alerts` API handlers.
This improves compatibility with Grafana.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4221
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Supports using `**` for `-rule` and `-rule.templates`: `dir/**/*.tpl` loads contents of dir and all subdirectories recursively.
See: #4041
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Artem Navoiev <tenmozes@gmail.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* lib/promscrape: adds filter for consul_sd_configs:
it allows advanced filtering for consul service discovery requests
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4183
* typo fix
* removes deprecation mentions since it's not relevant
* Update docs/CHANGELOG.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Templating of `-external.alert.source` is not expected to have access to the query which was causing runtime error when query function was passed as nil.
See: #4181
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmagent,lib/persistentqueue: show warning message if `--remoteWrite.maxDiskUsagePerURL` flag lower than 500MB
* app/vmagent,lib/persistentqueue: linter fix
* app/vmagent,lib/persistentqueue: fix comment
* feat: display heatmap in the explore metrics (#4111)
* fix: correct calc step for heatmap
* fix: remove spaces in the result of getDurationFromMilliseconds
* feat: add button "show today" to date picker
* feat: add comparison with the prev day (#3967)
* vmui/docs: add comparison of data to cardinality page
* feat: add WithTemplate page
* app/vmselect/prometheus: enable json mode for expand with expr API
* app/vmselect/prometheus: enable CORS and add content type
* feat: add api for expand with templates
* fix: remove console from useExpandWithExprs
* app/vmselect/prometheus: fix escaping
* vmui: integrate WITH template
* app/vmctl: check content type instead of form param
* fix: add content-type for fetch with-exprs
* fix: add a header to the server's response that allows the "Content-Type" header
* app/vmctl: added comment and cleanup
* app/vmctl: use format query param
---------
Co-authored-by: dmitryk-dk <kozlovdmitriyy@gmail.com>
* app/vmctl: add support for the different time format in the native binary protocol
* app/vmctl: update flag description, update CHANGELOG.md
* app/vmctl: add comment to exported function
* lib/httpserver: introduce `-http.maxConcurrentRequests` command-line flag
Introduce `-http.maxConcurrentRequests` command-line flag to protect
VM components from resource exhaustion during unexpected spikes of HTTP requests.
By default, the new flag's value is set to 0 which means no limits are applied.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/httpserver: mention http.maxConcurrentRequests in docs
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- added info about metric `vm_vminsert_metrics_read_total`,
- small doc refactoring
- and added make-command for running docs in docker.
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* vmalert: retry datasource requests with EOF or unexpected EOF errors
Retry failed read request on the closed connection one more time.
This may improve rules execution reliability when connection
between vmalert and datasource closes unexpectedly.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: fix old tests
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This handler will instruct search engines that indexing is not allowed for the content exposed to the internet. This should help to address issues like #4128 when instances are exposed to the internet without authentication.
"How do We Keep Metrics for a Long Time in VictoriaMetrics" article is referenced twice in "Third-party articles and slides about VictoriaMetrics" section
