* vmalert: remove head of line blocking for sending alerts
This change makes sending alerts to notifiers concurrent instead
of sequential. This eliminates head of line blocking, where first
faulty notifier address prevents the rest of notifiers from
receiving notifications.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: make default timeout for sending alerts 10s
Previous value of 1m was too high and was inconsistent
with default timeout defined for notifiers via
configuration file.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: linter checks fix
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Function `ValidateTemplates`, used on the vmalert startup,
is supposed to check whether used templates and functions
in loaded rules are correct. The function was parsing
and executing loaded templates.
However, rules may contain functions which can't be executed
without values (label values or query results), like `slice`.
Because of this, validation for completely valid expression
`{{ slice $labels.job 9 }}` will fail since `$labels.job`
is empty during validation.
This PR updates `ValidateTemplates` function to only parse
templates without executing them.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2514
Signed-off-by: hagen1778 <roman@victoriametrics.com>
add progress bars to the VM importer
The new progress bars supposed to display the processing speed per each
VM importer worker. This info should help to identify if there is a bottleneck
on the VM side during the import process, without waiting for its finish.
The new progress bars can be disabled by passing `vm-disable-progress-bar` flag.
Plotting multiple progress bars requires using experimental progress bar pool
from github.com/cheggaaa/pb/v3. Switch to progress bar pool required changes
in all import modes.
The openTSDB mode wasn't changed due to its implementation, which implies individual progress
bars per each series. Because of this, using the pool wasn't possible.
Signed-off-by: dmitryk-dk <kozlovdmitriyy@gmail.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Before, relabeling for notifier configured via file was supported
only for target labels discovered via SD.
With this change, new config field `alert_relabel_configs` is introduced
for applying relabeling to labels of sent alerts.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
To improve compatibility with Prometheus alerting the order of
templates processing has changed.
Before, vmalert did all labels processing beforehand. It meant
all extra labels (such as `alertname`, `alertgroup` or rule labels)
were available in templating. All collisions were resolved in favour
of extra labels.
In Prometheus, only labels from the received metric are available in
templating, so no collisions are possible.
This change makes vmalert's behaviour similar to Prometheus.
For example, consider alerting rule which is triggered by time series
with `alertname` label. In vmalert, this label would be overriden
by alerting rule's name everywhere: for alert labels, for annotations, etc.
In Prometheus, it would be overriden for alert's labels only, but in annotations
the original label value would be available.
See more details here https://github.com/prometheus/compliance/issues/80
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: split alert's `Start` field into `ActiveAt` and `Start`
The `ActiveAt` field identifies when alert becomes active for rules
with `for > 0`. Previously, this value was stored in field `Start`.
The field `Start` now identifies the moment alert became `FIRING`.
The split is needed in order to distinguish these two moments
in the API responses for alerts.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: support specific moment of time for rules evaluation
The Querier interface was extended to accept a new argument
used as a timestamp at which evaluation should be made.
It is needed to align rules execution time within the group.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: mark disappeared series as stale
Series generated by alerting rules, which were sent to remote write
now will be marked as stale if they will disappear on the next
evaluation. This would make ALERTS and ALERTS_FOR_TIME series
more precise.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: evaluate rules at fixed timestamp
Before, time at which rules were evaluated was calculated
right before rule execution. The change makes sure
that timestamp is calculated only once per evalution round
and all rules are using the same timestamp.
It also updates the logic of resending of already resolved
alert notification.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: allow overridin `alertname` label value if it is present in response
Previously, `alertname` was always equal to the Alerting Rule name. Now,
its value can be overriden if series in response containt the different value
for this label.
The change is needed for improving compatibility with Prometheus.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: align rules evaluation in time
Now, evaluation timestamp for rules evaluates as if
there was no delay in rules evaluation. It means, that
rules will be evaluated at fixed timestamps+group_interval.
This way provides more consistent evaluation results and
improves compatibility with Prometheus,
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add metric for missed iterations
New metric `vmalert_iteration_missed_total` will show
whether rules evaluation round was missed.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: reduce delay before the initial rule evaluation in group
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: rollback alertname override
According to the spec:
```
The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label.
```
https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: throw err immediately on dedup detection
```
The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts
or add samples to samples receiver if there is more than one alert with the same labels
```
https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: cleanup
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: use strings builder to reduce allocs
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add support of `resendDelay` flag for alerts
Co-authored-by: dmitryk-dk <dmitry.kozlov@brightlocal.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add support for `sortByLabel` template function
* vmalert: update API according to Prometheus conformance program
The changes to the API, field names and URL path has been made
according to the Prometheus specification for `alert_generator`
https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md
* vmalert: fix the timestamp of the evaluated rules
The timestamp used for alert's `EndsAt` was calculated
before sending the notification. While the correct way
is to use the timestamp taken right before rules evaluation.
* vmalert: add `-datasource.queryTimeAlignment` flag
The flag is supposed to provide ability to disable `time`
param alignment when executing rules. By default, this flag
is enabled, so it remains backward compatible.
The flag was introduced to achieve better compatibility
with Prometheus behaviour according to https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/discovery/consul: update services on the watcher's start
Previously, watcher's start was only initing goroutines for discovery
but not waiting for the first iteration to end. It means first Consul
discovery wasn't returning discovered targets until the next iteration.
The change makes the watcher's start blocking until we get first discovery
iteration done and all registries updated.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: remove workarounds for consul SD
Now when consul SD lib properly updates services
on the first start, we don't need workarounds in vmalert.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/discovery/consul: update after review
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/promscrape: support prometheus-like duration in scrape configs
The change allows to specify duration values like `1d`, `1w`
for fields `scrape_interval`, `scrape_timeout`, etc.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/817#issuecomment-1033384766
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/blockcache: make linter happy
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/promscrape: support prometheus-like duration in scrape configs
* add support for extra fields `scrape_align_interval` and `scrape_offset`;
* support Prometheus duration parsing for `__scrape_interval__`
and `__scrape_duration__` labels;
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
* wip
* docs/CHANGELOG.md: document the feature
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
vmalert: support configuration file for notifiers
* vmalert notifiers now can be configured via file
see https://docs.victoriametrics.com/vmalert.html#notifier-configuration-file
* add support of Consul service discovery for notifiers config
see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1947
* add UI section for currently loaded/discovered notifiers
* deprecate `-rule.configCheckInterval` in favour of `-configCheckInterval`
* add ability to suppress logs for duplicated targets for notifiers discovery
* change behaviour of `vmalert_alerts_send_errors_total` - it now accounts
for failed alerts, not HTTP calls.
For a long time notifier.Addr flag was required. The assumption was that vmalert will
be always used for alerting. However, practice shows that some users need only
recording rules. In this case, requirement of notifier.Addr is ambigious.
The change verifies if loaded config contains recording or alerting rules and
if there are corresponding flags set. This is true for initial config load
and hot reload.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously, ID for alert entity was generated without alertname or groupname.
This led to collision, when multiple alerting rules within the same group
producing same labelsets. E.g. expr: `sum(metric1) by (job) > 0` and
expr: `sum(metric2) by (job) > 0` could result into same labelset `job: "job"`.
The issue affects only UI and Web API parts of vmalert, because alert ID is used
only for displaying and finding active alerts. It does not affect state restore
procedure, since this label was added right before pushing to remote storage.
The change now adds all extra labels right after receiving response from the datasource.
And removes adding extra labels before pushing to remote storage.
Additionally, change introduces a new flag `Restored` which will be displayed in UI
for alerts which have been restored from remote storage on restart.
* vmalert: add flag to limit the max value for auto-resovle duration for alerts
The new flag `rule.maxResolveDuration` suppose to limit max value for
alert.End param, which is used by notifiers like Alertmanager for alerts auto resolve.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1586
* vmalert: remove `vmalert_execution_duration_seconds` metric
The summary for `vmalert_execution_duration_seconds` metric gives no additional
value comparing to `vmalert_iteration_duration_seconds` metric.
* vmalert: update config reload success metric properly
Previously, if there was unsuccessfull attempt to reload config and then
rollback to previous version - the metric remained set to 0.
* vmalert: add Grafana dashboard to overview application metrics
* docker: include vmalert target into list for scraping
* vmalert: extend notifier metrics with addr label
The change adds an `addr` label to metrics for alerts_sent and alerts_send_errors
to identify which exact address is having issues.
The according change was made to vmalert dashboard.
* vmalert: update documentation and docker environment for vmalert's dashboard
Mention Grafana's dashboard in vmalert's README in a new section #Monitoring.
Update docker-compose env to automatically add vmalert's dashboard.
Update docker-compose README with additional info about services.
* vmalert: support rules backfilling (aka `replay`)
vmalert can `replay` configured rules in the past
and backfill results via remote write protocol.
It supports MetricsQL/PromQL storage as data source,
and can backfill data to remote write compatible
storage.
Supports recording and alerting rules `replay`. See more
details in README.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/836
* vmalert: review fixes
* vmalert: readme fixes
* changes vmalert query function
for prometheus rules compatibility its better to use labels as map.
it simplifies template evaluation and allow to ignore can't evaluate field error
because map will return default value.
fixes https://github.com/VictoriaMetrics/operator/issues/243
On templates validation stage vmalert does not acutally send queries, so for complex
chained expression validation may fail. To avoid this, we add a blank sample in response
so validation can pass successfully. Later, during the rule execution, stub will be replaced
with real `query` function.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/989
The commit adds a support for template function `query`,
`first` and `value`. The function `query` executes
a MetricsQL query for active alerts. In vmalert we
update templates on every evaluation for active alerts
to keep them up to date. With `query` func it may become
a perf issue since it will fire a query on every execution.
We should keep it in mind for now.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/539
* app/vmalert: support multiple notifier urls (#584)
User now can set multiple notifier URLs in the same fashion
as for other vmutils (e.g. vmagent). The same is correct for
TLS setting for every configured URL. Alerts sending is done
in sequential way for respecting the specified URLs order.
* app/vmalert: add basicAuth support for notifier client (#585)
The change adds possibility to set basicAuth creds for notifier
client in the same fasion as for remote write/read and datasource.
The change adds no new functionality and aims to move flags definitions
to subpackages that are using them. This should improve readability
of the main function.
