* lib/protoparser: adds opentelemetry parser
app/{vmagent,vminsert}: adds opentelemetry ingestion path
Adds ability to ingest data with opentelemetry protocol
protobuf and json encoding is supported
data converted into prometheus protobuf timeseries
each data type has own converter and it may produce multiple timeseries
from single datapoint (for summary and histogram).
only cumulative aggregationFamily is supported for sum(prometheus
counter) and histogram.
Apply suggestions from code review
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
updates deps
fixes tests
wip
wip
wip
wip
lib/protoparser/opentelemetry: moves to vtprotobuf generator
go mod vendor
lib/protoparse/opentelemetry: reduce memory allocations
* wip
- Remove support for JSON parsing, since it is too fragile and is rarely used in practice.
The most clients send OpenTelemetry metrics in protobuf.
The JSON parser can be added in the future if needed.
- Remove unused code from lib/protoparser/opentelemetry/pb and lib/protoparser/opentelemetry/proto
- Do not re-use protobuf message between ParseStream() calls, since there is high chance
of high fragmentation of the re-used message because of too complex nested structure of the message.
* wip
* wip
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Add -remoteWrite.shardByURL command-line flag, which instructs vmagent to spread evenly
outgoing time series data among the configured remote storage systems specified via -remoteWrite.url .
Samples for the same time series go to the same -remoteWrite.url . This allows building horizontally
scalable stream aggregation when samples for counter and histogram series must be aggregated
by the same second-level vmagent instance.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4637
- Use a byte slice instead of a map for tracking indexes for matching series.
This improves performance, since access by slice index is faster than access by map key.
- Re-use the byte slice for tracking indexes for matching series.
This removes unnecessary memory allocations and improves stream aggregation performance a bit.
- Add an ability to return to the previous behvaiour by specifying -remoteWrite.streamAggr.dropInput command-line flag.
In this case all the input samples are dropped when stream aggregation is enabled.
- Backport the new stream aggregation behaviour from vmagent to single-node VictoriaMetrics when -streamAggr.config
option is set.
- Improve docs regarding this change at docs/CHANGELOG.md
- Document the new behavior at docs/stream-aggregation.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4243
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4575
- Improve docs
- Hide `debug relabeling` column when -promscrape.dropOriginalLabels command-line flag is set
- Inline the code from the added template functions, since the code is harder to follow
with the template functions, especially when these functions have misleading names.
Also, these functions are used only in one place, e.g. they do not reduce the amounts of code.
- Hide `click to show original labels` title at `labels` column when original labels aren't available.
- Show the reason on whey original labels aren't available at /service-discovery page.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4597
* app/vmagent: fix creating target id if `--promscrape.dropOriginalLabels` flag was used
* app/vmagent: hide links if OriginalLabels was dropped
* app/vmagent: update CHANGELOG.md and added information to the docs
* app/vmagent: fix comments
* docs: make `httpAuth.*` flags description less ambiguous
Currently, it may confuse users whether `httpAuth.*` flags are used by HTTP client or server configuration(see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4586 for example).
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: fix a typo
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
The purpose of the change is too highlight what HA pair is
and how deduplication needs identical labels to be present
in raw samples.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4367
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 8185c2466c)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmagent,lib/persistentqueue: show warning message if `--remoteWrite.maxDiskUsagePerURL` flag lower than 500MB
* app/vmagent,lib/persistentqueue: linter fix
* app/vmagent,lib/persistentqueue: fix comment
* lib/httpserver: introduce `-http.maxConcurrentRequests` command-line flag
Introduce `-http.maxConcurrentRequests` command-line flag to protect
VM components from resource exhaustion during unexpected spikes of HTTP requests.
By default, the new flag's value is set to 0 which means no limits are applied.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/httpserver: mention http.maxConcurrentRequests in docs
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Make sure that the last successfully loaded config is used on hot-reload failure
- Properly cleanup resources occupied by already initialized aggregators
when the current aggregator fails to be initialized
- Expose distinct vmagent_streamaggr_config_reload* metrics per each -remoteWrite.streamAggr.config
This should simplify monitoring and debugging failed reloads
- Remove race condition at app/vminsert/common.MustStopStreamAggr when calling sa.MustStop() while sa
could be in use at realoadSaConfig()
- Remove lib/streamaggr.aggregator.hasState global variable, since it may negatively impact scalability
on system with big number of CPU cores at hasState.Store(true) call inside aggregator.Push().
- Remove fine-grained aggregator reload - reload all the aggregators on config change instead.
This simplifies the code a bit. The fine-grained aggregator reload may be returned back
if there will be demand from real users for it.
- Check -relabelConfig and -streamAggr.config files when single-node VictoriaMetrics runs with -dryRun flag
- Return back accidentally removed changelog for v1.87.4 at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3639
- Do not generate __meta_server label, since it is unavailable in Prometheus.
- Add a link to https://docs.victoriametrics.com/sd_configs.html#kuma_sd_configs to docs/CHANGELOG.md,
so users could click it and read the docs without the need to search the corresponding docs.
- Remove kumaTarget struct, since it is easier generating labels for discovered targets
directly from the response returned by Kuma. This simplifies the code.
- Store the generated labels for discovered targets inside atomic.Value. This allows reading them
from concurrent goroutines without the need to use mutex.
- Use synchronouse requests to Kuma instead of long polling, since there is a little sense
in the long polling when the Kuma server may return 304 Not Modified response every -promscrape.kumaSDCheckInterval.
- Remove -promscrape.kuma.waitTime command-line flag, since it is no longer needed when long polling isn't used.
- Set default value for -promscrape.kumaSDCheckInterval to 30s in order to be consistent with Prometheus.
- Remove unnecessary indirections for string literals, which are used only once, in order to improve code readability.
- Remove unused fields from discoveryRequest and discoveryResponse.
- Update tests.
- Document why fetch_timeout and refresh_interval options are missing in kuma_sd_config.
- Add docs to discoveryutils.RequestCallback and discoveryutils.ResponseCallback,
since these are public types.
Side notes: it is weird that Prometheus implementation for kuma_sd_configs sets `instance` label,
since usually this label is set by the Prometheus itself to __address__ after the relabeling phase.
See https://www.robustperception.io/life-of-a-label/
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3389
See https://github.com/prometheus/prometheus/issues/7919
and https://github.com/prometheus/prometheus/pull/8844
as a reference implementation in Prometheus
* vmagent: add minimal scrape file exampe for vmagent quick start
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
* replace example with link to your prometheus.yml in docker
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
- Remove undocumented `username` and `password` config options from `nomad_sd_config`.
TODO: probably, remove these options from `consul_sd_config` too?
These options exist there for backwards compatibility purposes.
- Add __meta_nomad_service_alloc_id and __meta_nomad_service_job_id meta-labels
These labels contain AllocID and JobID fields for the discovered Nomad services.
- Various typo fixes.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3367
