This is needed for avoiding confusion between the `|` operator at `math` pipe and `|` pipe delimiter.
For example, the following query was parsed unexpectedly:
* | math foo / bar | fields x
as
* | math foo / (bar | fields) as x
Substituting `|` with `or` inside `math` pipe fixes this ambiguity.
### Describe Your Changes
Add storage metrics that count records that failed to insert:
- `RowsReceivedTotal`: the number of records that have been received by
the storage from the clients
- `RowsAddedTotal`: the number of records that have actually been
persisted. This value must be equal to `RowsReceivedTotal` if all the
records have been valid ones. But it will be smaller otherwise. The
values of the metrics below should provide the insight of why some
records hasn't been added
- `NaNValueRows`: the number of records whose value was `NaN`
- `StaleNaNValueRows`: the number of records whose value was `Stale NaN`
- `InvalidRawMetricNames`: the number of records whose raw metric name
has failed to unmarshal.
The following metrics existed before this PR and are listed here for
completeness:
- `TooSmallTimestampRows`: the number of records whose timestamp is
negative or is older than retention period
- `TooBigTimestampRows`: the number of records whose timestamp is too
far in the future.
- `HourlySeriesLimitRowsDropped`: the number of records that have not
been added because the hourly series limit has been exceeded.
- `DailySeriesLimitRowsDropped`: the number of records that have not
been added because the daily series limit has been exceeded.
---
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
* app/vmgateway: allow skipping Bearer prefix, parsing access as string
- allow disabling of "Bearer" prefix check - This is needed in order to support OIDC systems where identity token is provided separately from access token and it does not contain "Bearer" prefix(such as Azure Entra ID, ex AD).a
- support parsing "vm_access" claim as a string - This is helpful for systems where claims can only be mapped to string.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/changelog: mention vmgateway updates
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Previously per-token hashes for per-block bloom filters were re-calculated on every scanned block.
This could be slow when the number of tokens is big or when the number of blocks to scan is big.
Pre-calculate hashes for bloom filters and then use them for searching in bloom filters.
This improves performance by 2.5x for in(...) filters with many values to search inside `in()`.
Previous bugfix at 49f63b2 only partially fixed pagination host validation error.
Before this fix it was:
```
unexpected nextLink host \"management.azure.com\", expecting \"https://management.azure.com\"
```
Now we only check the `Host` without schema.
However, when Azure respond `nextLink` in `Host:Port` format, the
`nextLink` check will fail:
```
unexpected nextLink host \"management.azure.com:443\", expecting \"management.azure.com\"
```
This pull request further relaxes the checks by only checking the
`Hostname`.
---
related issue: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6912
This patch reverts 1fd3385
After discussing it we've come to conclusion that this is a valid
behavior which can be avoided by deleting the time series only once the
corresponding stale NaNs have been received.
On the other hand, the fix leads to lost stale NaNs in some rare but
valid use cases. For example:
- In a cluster configuration the samples for a given time series are
normally sent to the same vmstorage replica. However, wminsert may
reroute the samples to another replica because the original one is down
or is overloaded. In this case the stale NaN may end up on a replica
that has no data for that time series, but we still want to record that
sample.
Thus, reverting that fix.
---
related issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5069
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
follow up
4ecc370acb
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Previously (f1:foo OR f2:bar) was incorrectly returning `foo` token for `f1` and `bar` token for `f2`.
These tokens were used for checking against bloom filter for every data block, so the data block,
which didn't contain simultaneously `foo` token for `f1` field and `bar` token for `f2` field, was skipped.
This was incorrect, since such a block may contain logs matching the original OR filter.
The fix is to return common tokens from `OR`-delimted filters only if these tokens exist at EVERY such filter
for the given field name. If some `OR`-delimited filter misses the given field name, then `OR`-delimited filters
do not contain common tokens, which could be used for checking against bloom filter.
While at it, add more tests covering various edge cases for filters delimited by AND and OR.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6554
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6556
### Describe Your Changes
Upgraded victoriametrics and victorialogs data source versions.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Commit adds the following changes:
* Adds support of OpenTelemetry logs for Victoria Logs with protobuf encoded messages
* json encoding is not supported for the following reasons:
- It brings a lot of fragile code, which works inefficiently.
- json encoding is impossible to use with language SDK.
* splits metrics and logs structures at lib/protoparser/opentelemetry/pb package.
* adds docs with examples for opentelemetry logs.
---
Related issue: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4839
Co-authored-by: AndrewChubatiuk <andrew.chubatiuk@gmail.com>
Co-authored-by: f41gh7 <nik@victoriametrics.com>
* updates change log
* adds VL-Debug http header
* updates doc
* extracts only the first value of http headers for VL-Stream-Fields and VL-Ignore-Fields.
It makes behaviour the same as Query string args. And allows to easily configure client applications.
Since most of the client collectors don't support multi value headers.
Signed-off-by: f41gh7 <nik@victoriametrics.com>
* Many collectors don't support forwarding url query params to the remote system. It makes impossible to define stream fields for it. Workaround with proxy between VictoriaLogs and log shipper is too complicated solution.
* This commit adds the following changes:
* Adds fallback to to headers params, if query param is empty for:
_msg_field -> VL-Msg-Field
_stream_fields -> VL-Stream-Fields
_ignore_fields -> VL-Ignore-Fields
_time_field -> VL-Time-Field
* removes deprecations from victorialogs compose files, added more
output format examples for logstash, telegraf, fluent-bit
related issue: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5310
Recent versions of `docker build` started generating the InvalidDefaultArgInFrom warning if Dockerfile contains
an ARG without default value. While this warning doesn't affect building Docker packages via `make package-*` commands,
it is better suppressing the warning, so it doesn't clutter `make package-*` output with the noise,
which can hide real issues in the future.
…specifying `-streamAggr.dedupInterval` or
`-remoteWrite.streamAggr.dedupInterval` command-line flag
[The
documentation](https://docs.victoriametrics.com/stream-aggregation/)
contains conflicting descriptions regarding deduplication for
non-matched series when `-remoteWrite.streamAggr.config` and / or
`-streamAggr.config` are set:
1. Statement below says **all the received data** is deduplicated:
>[vmagent](https://docs.victoriametrics.com/vmagent/) supports
relabeling, deduplication and stream aggregation for all the received
data, scraped or pushed. Then, the collected data will be forwarded to
specified -remoteWrite.url destinations. The data processing order is
the following:
>1. all the received data is relabeled according to the specified
[-remoteWrite.relabelConfig](https://docs.victoriametrics.com/vmagent/#relabeling)
(if it is set)
>2. all the received data is deduplicated according to specified
[-streamAggr.dedupInterval](https://docs.victoriametrics.com/stream-aggregation/#deduplication)
(if it is set to duration bigger than 0)
2. Another statement says the deduplication is performed individually
for the **matching samples**
>The de-deduplication is performed after applying
[relabeling](https://docs.victoriametrics.com/vmagent/#relabeling) and
before performing the aggregation. If the -remoteWrite.streamAggr.config
and / or -streamAggr.config is set, then the de-duplication is performed
individually per each [stream aggregation
config](https://docs.victoriametrics.com/stream-aggregation/#stream-aggregation-config)
for the matching samples after applying
[input_relabel_configs](https://docs.victoriametrics.com/stream-aggregation/#relabeling).
Considering the following deduplication use cases:
1. To apply deduplication(globally or for specific remoteWrite
destination) for all the received data, scraped or pushed
--- using `-streamAggr.dedupInterval` or
`-remoteWrite.streamAggr.dedupInterval`.
2. To deduplicate and aggregate metrics that match the rule `match`
filters
--- using `-remoteWrite.streamAggr.config` and specifiying
`dedup_interval` option in [stream aggregation
config](https://docs.victoriametrics.com/stream-aggregation/#stream-aggregation-config).
3. To deduplicate all the received data while having `streamAggr.config`
for some metrics
--- no way for a single vmagent now, need to set up two level vmagents
This PR implements case3.
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
### Describe Your Changes
Correct the spelling error of 'vminsert' in the dashboards.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
The 3 alerts for VMagent:
- `RejectedRemoteWriteDataBlocksAreDropped`
- `TooManyScrapeErrors`
- `TooManyWriteErrors`
missed the description annotation.
I moved the summary to description and added a generic summary to these
alerts.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Marco Maurer <marco.kilchhofer@gmail.com>
fix#6554
andfilter shouldn't return orfilter field which result in bloomfilter
return false.
---------
Co-authored-by: hagen1778 <roman@victoriametrics.com>
The prev links like `/changelog_2021/`
stopped working after 9dc8d1debd
because these files now require specifying the parent `changelog` in the path, like `/changelog/changelog_2021/`.
This fix adds an alias for an old link.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
This is a follow-up PR: Unit tests introduced in #6872 can now use
RowsAddedTotal counter whose scope was fixed in #6841.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
### Describe Your Changes
fsync() ensures that the data is written to disk. In production this is
needed for data durability. However, during the development, when the
unit tests are run, this level of durability is not needed. Therefore
fsync() can be disabled which will makes test runs two times faster.
The disabling is done by setting the `DISABLE_FSYNC_FOR_TESTING`
environment variable. The valid values for this variable are the same as
the values of the arg of `go doc strconv.ParseBool`:
```
1, t, T, TRUE, true, True, 0, f, F, FALSE, false, False.
```
Any other value means `false`.
The variable is set for all test build targets. Compare running times:
Build Target | DISABLE_FSYNC_FOR_TESTING=0 | DISABLE_FSYNC_FOR_TESTING=1
----------------- | ------------------------------------------------ |
-------------------------------------------------
make test | 1m5s | 0m22s
make test-race | 3m1s | 1m42s
make test-pure | 1m7s | 0m20s
make test-full | 1m21s | 0m32s
make test-full-386 | 1m42s | 0m36s
When running tests for a given package, fsync can be disabled as
follows:
```shell
DISABLE_FSYNC_FOR_TESTING=1 go test ./lib/storage
```
Disabling fsync() is intended for testing purposes only and the name of
the variables reflects that.
What could also have been done but haven't:
- lib/filestream/filestream.go: `Writer.MustFlush()` also uses f.Sync()
but nothing has been done to it, because the Writer.MustFlush() is not
used anywhere in the VM codebase. A side question: what is the general
policy for the unused code?
- lib/filestream/filestream.go: Writer.Write() calls `adviceDontNeed()`
which calls unix.Fdatasync(). Disabling it could potentially improve
running time, but running tests with this code disabled has shown
otherwise.
### Checklist
The following checks are **mandatory**:
- [ x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
### Describe Your Changes
Add mentions of VictoriaMetrics Cloud to the documentation of vmalert
where this info is helpful to a user.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
### Describe Your Changes
Describe steps to run VictoriaMetrics Single node or Cluster on
VictoriaMetrics Cloud
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
This pull request fixes incorrect URLs in two places:
1. In the OTel guide, which has been corrected in
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6880, but one
incorrect URL is still missing.
2. In the URL example, the cache reset endpoint for vmselect / Cluster
version is `/internal/resetRollupResultCache`, but it is mistakenly
noted as `/select/internal/resetRollupResultCache`, which misguides the
user. （introduced in #4468)
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
