Aliaksandr Valialkin
4f3a5742eb
app/vmselect/prometheus: do not extend [d]
to the detected interval between samples for first_over_time(m[d])
...
This is for the sake of consistency with similar change for the last_over_time(m[d]) at a724229b5d
2021-08-21 19:56:14 +03:00
Aliaksandr Valialkin
a724229b5d
app/vmselect/promql: do not override [d]
at last_over_time(m[d])
if [d]
is smaller than scrape_interval
...
Since most users do not expect the overriding of explicitly set `[d]`.
2021-08-19 10:31:48 +03:00
Aliaksandr Valialkin
113f0a8a07
app/vmselect/promql: drop staleness marks before calling rollupConfig.Do
...
This allows dropping staleness marks only once and then calculate multiple rollup functions on the result.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1526
2021-08-15 13:21:10 +03:00
Aliaksandr Valialkin
25997a70f1
Revert "app/vmselect/promql: properly handle Prometheus staleness marks in removeCounterResets functions"
...
This reverts commit 94dfcb6747a3b29a11d14e71bea21a2312bb6346.
It is better to remove staleness marks (decimal.StaleNaN) before calling rollupConfig.Do, e.g. in preFunc
2021-08-15 13:19:16 +03:00
Aliaksandr Valialkin
73d7b568da
app/vmselect/promql: properly handle Prometheus staleness marks in removeCounterResets functions
...
Prometheus stalenss marks shouldn't be changed in removeCounterResets. Otherwise they will be converted to an ordinary NaN values,
which couldn't be removed in dropStaleNaNs() function later. This may result in incorrect calculations for rollup functions.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1526
2021-08-14 12:45:57 +03:00
Aliaksandr Valialkin
4401464c22
all: add support for Prometheus staleness markers
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1526
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/748
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1509
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1530
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/845
2021-08-13 12:10:17 +03:00
Aliaksandr Valialkin
e92fde7945
app/vmselect/promql: add present_over_time(m[d])
function, which will be available starting from Prometheus 2.29.0
...
See https://github.com/prometheus/prometheus/releases/tag/v2.29.0-rc.0 and https://github.com/prometheus/prometheus/pull/9097
2021-08-03 16:11:49 +03:00
Aliaksandr Valialkin
cdfae0117a
app/vmselect/promql: return the last timestamp for the max / min value from tmax_over_time()
and tmin_over_time()
function as most users expect
2021-06-23 14:19:00 +03:00
Roman Khavronenko
fb4f758715
promql: fix increase_pure
calculation for cases with stale series ( #1381 )
...
Due to staleness handling, increase_pure were using incorrect previous value
during calculation in cases where series disappears for period longer
than staleness period and then returns back. The fix suppose to account
for a real datapoint value before staleness takes place. The fix should
remove unexpected spikes while using `increase_pure` for staled series.
2021-06-15 17:37:19 +03:00
Aliaksandr Valialkin
d0dca62026
app/vmselect/promql: typo fix in the comment
2021-06-09 18:34:31 +03:00
Aliaksandr Valialkin
f0a4157f89
app/vmselect/promql: do not crash if histogram_over_time()
function name contains uppercase letters such as Histogram_over_time()
2021-03-16 12:24:21 +02:00
Aliaksandr Valialkin
923cdb0552
app/vmselect/promql: reduce overhead on scrape interval estimation
...
It should be enough to use the first 20 datapoints instead of 100 datapoints for scrape interval estimation.
2021-03-15 20:31:33 +02:00
Aliaksandr Valialkin
fa03e0d210
app/vmselect/promql: add increase_pure()
function to MetricsQL
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/962
2021-02-22 19:14:15 +02:00
Aliaksandr Valialkin
8749c2dd92
app/vmselect: add -search.maxStepForPointsAdjustment
command-line flag, which can be used for disabling adjustment for points returned from /api/v1/query_range
handler if they have timestamps closer than -search.latencyOffset
to the current time
2021-01-19 22:56:32 +02:00
Aliaksandr Valialkin
1837f2f7d3
app/vmselect/promql: add tfirst_over_time(m[d])
and tlast_over_time(m[d])
MetricsQL functions for returning timestamps for the first and the last samples in m
over d
2021-01-12 16:12:12 +02:00
Aliaksandr Valialkin
11fa458e39
app/vmselect/promql: return expected increase()
result for the first point on the graph with value not exceeding 100
2020-12-15 13:40:46 +02:00
Aliaksandr Valialkin
1906f841c9
app/vmselect/promql: do not reduce lookbehind window for any_rollup_func(m)
to -search.maxStalenessInterval
. It should equal to step
value passed to /api/v1/query_range
as most users expect
2020-12-08 15:16:17 +02:00
Aliaksandr Valialkin
e2e8ef86d9
app/vmselect/promql: add count_eq_over_time(m[d], N)
and count_ne_over_time(m[d], N)
for calculating the number of samples in m
over d
that are equal / not equal to N
2020-12-05 12:30:46 +02:00
Aliaksandr Valialkin
9d87496b50
app/vmselect/promql: do not return 0
value from sum_over_time(m[d])
when there are no samples on the given d
window.
...
This aligns the behaviour of `sum_over_time()` with other `_over_time()` functions and with Prometheus behavior.
2020-12-02 13:12:50 +02:00
Aliaksandr Valialkin
d9d01f976b
app/vmselect/promql: remove spikes from increase()
and delta()
results on time series with spare irregular data points
...
Do not take into account spare data point value if the next point will is located too far from the current point.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/894
2020-11-13 15:23:44 +02:00
Aliaksandr Valialkin
1f19c167a4
app/vmselect/promql: assume that time series value doesnt change during gaps when calculating increase() and delta()
...
This should remove unexpected spikes at the end of gaps.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/894
2020-11-13 14:59:24 +02:00
Aliaksandr Valialkin
47390d8947
app/vmselect/promql: do not return data points in the end of the selected time range for time series ending in the middle of the selected time range
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/887
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/845
2020-11-10 14:51:44 +02:00
Aliaksandr Valialkin
ba4a2c8bca
app/vmselect: typo fix in a description for -search.minStalenessInterval
: mimimum->minimum
2020-11-10 01:18:08 +02:00
Aliaksandr Valialkin
5e75c389e6
app/vmselect/promql: allow dropping trailing sample only for default_rollup
function
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/850
2020-11-02 02:10:59 +02:00
Aliaksandr Valialkin
cb71af216a
app/vmselect/promql: go fmt
2020-11-02 00:15:29 +02:00
Aliaksandr Valialkin
daacbc7e34
app/vmselect/promql: do not drop trailing datapoints for instant queries
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/845
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/748
2020-11-02 00:12:37 +02:00
Aliaksandr Valialkin
28353e48ca
app/vmselect/promql: an attempt to improve heuristics for dropping trailing data points in time series
...
Now trailing data points are additionally dropped for time series with a single raw sample
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/748
2020-10-17 10:44:34 +03:00
Aliaksandr Valialkin
9aa3b65766
app/vmselect/promql: improve time series staleness detection
...
This should prevent from double counting for time series at the time when it changes label.
The most common case is in K8S, which changes pod uid label with each new deployment.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/748
2020-10-13 12:19:57 +03:00
Aliaksandr Valialkin
d8af290947
app/vmselect/promql: fix mode_over_time
calculations
...
Previously `mode_over_time` could return garbage due to improper shuffling of input data points.
2020-10-13 11:58:25 +03:00
Aliaksandr Valialkin
f7d28bddbf
Revert "app/vmselect/promql: remove metric name from results of certain rollup functions in order to be consistent with Prometheus"
...
This reverts commit e5202a4eae
.
Reason for revert: the previous behavior for VictoriaMetrics is easier to understand and use by users -
functions, which don't change the meaning of the time series shouldn't drop metric name.
Now the following functions do not drop metric name:
* max_over_time
* min_over_time
* avg_over_time
* quantile_over_time
* geomean_over_time
* mode_over_time
* holt_winters
* predict_linear
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/674
2020-10-12 11:35:18 +03:00
Aliaksandr Valialkin
c584aece38
app/vmselect/promql: properly limit implicitly set rollup window to -search.maxStalenessInterval
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/784
2020-09-23 23:23:59 +03:00
Aliaksandr Valialkin
62919eaf7e
app/vmselect/promql: go fmt
2020-09-08 15:19:59 +03:00
Aliaksandr Valialkin
e6da63dffe
app/vmselect/promql: adjust integrate()
calculations to be more similar to calculations from InfluxDB: attempt #2
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/701
2020-09-08 14:35:50 +03:00
Aliaksandr Valialkin
8e85b56737
app/vmselect/promql: adjust integrate()
calculations to be more similar to calculations from InfluxDB
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/701
2020-09-08 14:23:39 +03:00
Aliaksandr Valialkin
c0343a661b
app/vmselect/promql: increase floating point calculations accuracy by dividing by 1e3
instead of multiplying by 1e-3
2020-09-08 14:00:47 +03:00
Aliaksandr Valialkin
f4e7e5fb90
app/vmselect/promql: add count_le_over_time(m[d], le)
and count_gt_over_time(m[d], gt)
functions
...
These functions returns the number of raw samples that don't exceed `le` or are bigger than `gt`.
These functions are complement to already existing `share_le_over_time(m[d], le)` and `share_gt_over_time(m[d], gt)`.
2020-09-03 15:29:10 +03:00
Aliaksandr Valialkin
e5202a4eae
app/vmselect/promql: remove metric name from results of certain rollup functions in order to be consistent with Prometheus
...
Rollup functions:
- avg_over_time
- min_over_time
- max_over_time
- quantile_over_time
This improves VictoriaMetrics results at https://promlabs.com/promql-compliance-test-results-victoriametrics/
2020-08-06 23:29:13 +03:00
Aliaksandr Valialkin
e6eee2bebf
app/vmselect/promql: add zscore-related functions: zscore_over_time(m[d])
and zscore(q) by (...)
2020-08-03 21:52:18 +03:00
Aliaksandr Valialkin
328b52e5ff
app/vmselect/promql: return non-empty value from rate_over_sum(m[d])
even if a single data point is located in the given [d]
window
...
Just divide the data point value by the window duration in this case.
2020-07-29 12:37:58 +03:00
Aliaksandr Valialkin
700737c181
app/vmselect/promql: remove rollupFuncArg.realPrevValue handling, since the corner case in increase()
is handled in another way now
...
See e00cfc854d
for the approach used now.
2020-07-29 12:37:58 +03:00
Aliaksandr Valialkin
2f735f112d
app/vmselect/promql: fill gaps with 0 in rate_over_sum
response when the last value before the selected time window isnt empty
2020-07-29 12:37:58 +03:00
Aliaksandr Valialkin
3107c633e3
app/vmselect/promql: typo fix after 3e557c9861
2020-07-24 02:15:58 +03:00
Aliaksandr Valialkin
3e557c9861
app/vmselect/promql: add rate_over_sum(m[d])
function to MetricsQL, which returns rate over sum of m
values over d
duration
...
Something like `sum_over_time(m[d]) / d`, but more accurate.
2020-07-24 01:17:42 +03:00
Aliaksandr Valialkin
b1f6843bd0
app/vmselect/promql: allow setting [d]
window smaller than the interval between raw points for avg_over_time
...
This makes `avg_over_time` behavior consistent with `sum_over_time` and `count_over_time` behaviors.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/636
2020-07-23 22:25:43 +03:00
Aliaksandr Valialkin
e00cfc854d
app/vmselect/promql: skip the first value in time series passed to increase()
if it exceeds by more than 10x the delta between the next value and the first value
...
This should prvent from inflated `increase()` results for time series that start from big initial values.
Such cases may occur when a label value changes in a metric without counter reset.
2020-07-21 17:24:10 +03:00
Aliaksandr Valialkin
ecb1b2564a
app/vmselect/promql: add mode()
aggregate function
2020-07-20 15:31:20 +03:00
Aliaksandr Valialkin
1c641037e8
app/vmselect/promql: add mode_over_time(m[d])
function
...
See https://en.wikipedia.org/wiki/Mode_(statistics) and https://stackoverflow.com/questions/61134078/promql-query-to-return-the-value-from-a-range-vector-which-occurs-maximum-no-of
2020-07-17 18:28:45 +03:00
Aliaksandr Valialkin
d5dddb0953
all: use %w instead of %s for wrapping errors in fmt.Errorf
...
This will simplify examining the returned errors such as httpserver.ErrorWithStatusCode .
See https://blog.golang.org/go1.13-errors for details.
2020-06-30 23:05:11 +03:00
Aliaksandr Valialkin
dbd8beccfa
app/vmselect/promql: add ascent_over_time(m[d])
and descent_over_time(m[d])
functions
...
These functions could be useful in GPS tracking apps for calculating the summary for height gain/loss
over the given duration `d`.
2020-05-21 12:07:48 +03:00
Aliaksandr Valialkin
4e4f57b121
lib/metricsql: move it to a separate repository - github.com/VictoriaMetrics/metrics
2020-04-28 15:28:22 +03:00