Commit Graph

26 Commits

Author SHA1 Message Date
Aliaksandr Valialkin
4318f34644
lib/protoparser: substitute hybrid channel-based pools with plain sync.Pool
Using plain sync.Pool simplifies the code without increasing memory usage and CPU usage.
So it is better to use plain sync.Pool from readability and maintainability PoV.

This is a follow-up for 8942f290eb
2024-04-20 22:02:39 +02:00
Hui Wang
d6ecfffa17
chore: add actual request size in error message () 2024-02-29 02:40:57 +02:00
Aliaksandr Valialkin
f7b589e38a
lib/prompb: switch to github.com/VictoriaMetrics/easyproto 2024-01-16 20:43:09 +02:00
Hui Wang
91379331eb
lib/protoparser/promremotewrite: fall back to zstd decoding if Snappy-decoding fails ()
This case is possible after the following steps:
1. vmagent successfully performed handshake with the -remoteWrite.url and the remote storage supports zstd-compressed data.
2. remote storage became unavailable or slow to ingest data, vmagent compressed the collected data into blocks with zstd and puts these blocks to persistent queue on disk.
3. vmagent restarts and the remote storage is unavailable during the handshake, then vmagent falls back to Snappy compression.
4. vmagent starts sending zstd-compressed data from persistent queue to the remote storage, while falsely advertizing it sends Snappy-compressed data.
5. The remote storage receives zstd-compressed data and fails unpacking it with Snappy.

The solution is the same as 12cd32fd75, just fall back to zstd decompression if Snappy decompression fails.
2023-11-17 15:53:18 +01:00
Aliaksandr Valialkin
12cd32fd75
lib/protoparser/promremotewrite: fall back to Snappy decoding if zstd decoding fails
This case is possible after the following steps:

1. vmagent tries to perform handshake with the -remoteWrite.url in order to determine whether
   the remote storage supports zstd-compressed data.
2. The remote storage is unavailable during the handshake. In this case vmagent falls back to Snappy compression
   for the data sent to the remote storage.
3. vmagent compresses the collected data into blocks with Snappy and puts these blocks to persistent queue on disk.
4. The remote storage becomes available.
5. vmagent restarts, performs the handshake with the remote storage and detects that it supports zstd-compressed data.
6. vmagent starts sending Snappy-compressed data from persistent queue to the remote storage,
   while falsely advertizing it sends zstd-compressed data.
7. The remote storage receives Snappy-compressed data and fails unpacking it with zstd.

The solution is to just fall back to Snappy decompression if zstd decompression fails.

Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5301
2023-11-13 21:25:39 +01:00
Aliaksandr Valialkin
815e9bf892
app/{vmagent,vminsert}: follow-up for NewRelic data ingestion protocol support
This is a follow-up for f60c08a7bd

Changes:

- Make sure all the urls related to NewRelic protocol start from /newrelic . Previously some urls were started from /api/v1/newrelic

- Remove /api/v1 part from NewRelic urls, since it has no sense

- Remove automatic transformation from CamelCase to snake_case for NewRelic labels and metric names,
  since it may complicate the transition from NewRelic to VictoriaMetrics. Preserve all the metric names and label names,
  so users could query metrics and labels by the same names which are used in NewRelic.
  The automatic transformation from CamelCase to snake_case can be added later as a special action for relabeling rules if needed.

- Properly update per-tenant data ingestion stats at app/vmagent/newrelic/request_handler.go . Previously it was always zero.

- Fix NewRelic urls in vmagent when multitenant data ingestion is enabled. Previously they were mistakenly started from `/`.

- Document NewRelic data ingestion url at docs/Cluster-VictoriaMetrics.md

- Remove superflouos memory allocations at lib/protoparser/newrelic

- Improve tests at lib/protoparser/newrelic/*

Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3520
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4712
2023-10-16 13:55:04 +02:00
Aliaksandr Valialkin
80c6d1e24c
app/vmagent: add support for VictoriaMetrics remote write protocol, which allows saving up to 10x on network bandwidth costs under high load
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1225
2023-02-20 18:40:40 -08:00
Aliaksandr Valialkin
9fd003d54a
all: rename ParseStream -> stream.Parse
This is a follow-up for 057698f7fb
2023-02-13 10:53:12 -08:00
Aliaksandr Valialkin
f987fb9c8b
lib/protoparser/promremotewrite: extract stream parsing code into a separate stream package
This is a follow-up for 057698f7fb
2023-02-13 10:48:11 -08:00
Aliaksandr Valialkin
b275983403
lib/writeconcurrencylimiter: improve the logic behind -maxConcurrentInserts limit
Previously the -maxConcurrentInserts was limiting the number of established client connections,
which write data to VictoriaMetrics. Some of these connections could be idle.
Such connections do not consume big amounts of CPU and RAM, so there is a little sense in limiting
the number of such connections. So now the -maxConcurrentInserts command-line option
limits the number of concurrently executed insert requests, not including idle connections.

It is recommended removing -maxConcurrentInserts command-line option, since the default value
for this option should work good for most cases.
2023-01-06 22:07:16 -08:00
Aliaksandr Valialkin
1a88fe5b1f
lib/flagutil/bytes.go: properly handle values bigger than 2GiB on 32-bit architectures
This fixes handling of values bigger than 2GiB for the following command-line flags:

- -storage.minFreeDiskSpaceBytes
- -remoteWrite.maxDiskUsagePerURL
2022-12-14 19:29:57 -08:00
Nikolay
dd53abf36d changes protoparser apis for accepting reading from io.Reader ()
adds InsertHandlerForReader apis to vmagent
2021-09-20 14:54:20 +03:00
Aliaksandr Valialkin
1a237c6903 all: properly handle CPU limits set on the host system/container
This can reduce memory usage on systems with enabled CPU limits.

Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/946
2020-12-08 21:07:03 +02:00
Aliaksandr Valialkin
f80d6473e1 lib/protoparser/promremotewrite: log the time spent on unsuccessful data read from the network
This should help with debugging `connection timed out` errors.
2020-11-13 17:49:21 +02:00
Aliaksandr Valialkin
9dfe00c962 lib/protoparser/promremotewrite: synchronously process Prometheus remote_write requests
There is no reason in processing these requests asynchronously in the face of https://github.com/VictoriaMetrics/VictoriaMetrics/issues/896
Synchronous processing code is easier to read and understand than the previous async code
2020-11-13 12:17:32 +02:00
Aliaksandr Valialkin
739b88c1e4 lib/protoparser/promremotewrite: forward errors, which can occur during data ingestion, to the caller of ParseStream, so it could properly return HTTP 503 status code on non-nil error
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/896
2020-11-13 11:00:41 +02:00
Aliaksandr Valialkin
ed724d25ba lib/promscrape: add stream parse mode for efficient scraping of targets that expose millions of metrics 2020-11-01 23:12:26 +02:00
Aliaksandr Valialkin
1481d6d8ff lib/protoparser: avoid copying of buffer read from the network to unmarshal buffer 2020-09-28 17:19:04 +03:00
Aliaksandr Valialkin
8df33bd5c1 app/{vminsert,vmagent}: improve data ingestion speed over a single connection
Process data obtianed from a single connection on all the available CPU cores.
2020-09-28 04:14:51 +03:00
Aliaksandr Valialkin
7072db75cb lib/protoparser: use 64KB read buffer instead of default 4KB buffer provided by net/http.Server
This should reduce syscall overhead when reading big amounts of data
2020-09-28 02:07:19 +03:00
Aliaksandr Valialkin
6aab2f4989 all: allow using KB, MB, GB, KiB, MiB and GiB suffixes in command-line flag values related to byte sizes or byte rates 2020-08-16 17:08:28 +03:00
Roman Khavronenko
929ad74de6 lib/protoparser: fix metric name of unmarshal errors in promremotewrite ()
The change fixes the typo in metric name `vm_protoparser_unmarshal_errors` to
respect the naming standard.
2020-07-08 14:19:27 +03:00
Aliaksandr Valialkin
d962568e93 all: use %w instead of %s for wrapping errors in fmt.Errorf
This will simplify examining the returned errors such as httpserver.ErrorWithStatusCode .
See https://blog.golang.org/go1.13-errors for details.
2020-06-30 23:33:46 +03:00
Aliaksandr Valialkin
6a1aab88fd lib/protoparser: metrics renaming: vm_protoparser_<type>_* -> vm_protoparser_*{type="<type>"}
This should improve composability of these metrics in PromQL queries
2020-02-28 20:19:59 +02:00
Aliaksandr Valialkin
c4194020ef app/vmagent: do not allow sending unpacked requests with sizes exceeding -maxInsertRequestSize 2020-02-25 19:35:43 +02:00
Aliaksandr Valialkin
7ee7614e90 app/vmagent: initial implementation for vmagent 2020-02-23 17:31:54 +02:00