Allowing to select multiple instance IPs makes it much easier to view
metrics for longer periods of time in dynamic environments such as
Kubernetes. In k8s update will also cause IP to change making it harder
to use dashboard to check the status.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5869
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* use docs.victoriametrics.com instead of github docs
* add links to common terms used in VictoriaMetrics
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* add more details to changelog
* simplify panels description
* remove capacity planning recommendation, as it proves it incompetent
Signed-off-by: hagen1778 <roman@victoriametrics.com>
During background downsampling, rate(vm_deduplicated_samples_total{type="merge"}) could be much bigger than
rate(vm_rows_added_to_storage_total) and it could last quite some time,
which causes negative values of Storage full ETA and confuses users, see playground.
Instead of trying to get more accurate results during downsampling, I think it's ok to ignore
vm_deduplicated_samples_total at all, it's more reasonable to see Storage full ETA increase after downsampling.
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
It should help identifying cases when too much CPU is spent on garbage collection,
and advice users on how this can be addressed.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The `path!="/favicon.ico"` filter has little sense, since there are many other special paths,
which may be filtered out - /metrics, /flags, /health, /ping, /robots.txt, /-/healthy, /-/ready, /reload, etc.
See /lib/httpserver/httpserver.go for more details.
It will be hard or impossible to maintain filters for all these paths, so it is better to drop this filter
in order to simplify queries and improve the consistency of these queries.
`version` label won't show the difference if various flavors of the same
version were deployed. But `short_version` will.
For example, on the sandbox env we test VM builds before new version release.
Without this change, the version update won't be visible on dashboard.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Correctly calculate `Bytes per point` value for single-server and cluster VM dashboards.
Before, the calculation mistakenly accounted for the number of entries in indexdb in
denominator, which could have shown lower values than expected.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously the -maxConcurrentInserts was limiting the number of established client connections,
which write data to VictoriaMetrics. Some of these connections could be idle.
Such connections do not consume big amounts of CPU and RAM, so there is a little sense in limiting
the number of such connections. So now the -maxConcurrentInserts command-line option
limits the number of concurrently executed insert requests, not including idle connections.
It is recommended removing -maxConcurrentInserts command-line option, since the default value
for this option should work good for most cases.
Got "Failed to upgrade legacy queries Datasource $ds was not found" in
Grafana on operator dashboard.
It's datasource variable was incorrectly named `datasource`.
Also made the rest of the dashboards have homogeneous datasource-variable
names and selections, matching vmagent dashboard.
The new annotation is hidden by default and suppose to show
component `short_version` label change on the panels.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The change list is the following:
* bump Grafana version to 9.2.6;
* replace old "Graph" panel with "TimeSeries" panel;
* show % usage of Mem and CPU additionally to of absolute values;
* `Caches` row was removed. All needed info for caches is now part of `Troubleshooting`;
* add Annotations for Alert triggers. Not all alerts are supposed to be displayed
on the dashboard, but only those with label `show_at: dashboard`.
See `alerts.yml` change.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* some unexpected DS UIDs were removed;
* replace `$instance.*` filter with `$instance` since we respect
the instance port anyway;
* remove predefined datasource for `clusterbytenant`
in favour of datasource variable `ds`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/cluster: few updates
* apply consistent formatting across panels;
* make resource usage panels per component more detailed;
* add extra panels to vmselect for displaying
`vm_rows_read_per_query`, `vm_rows_scanned_per_query`,
`vm_rows_read_per_series` and `vm_series_read_per_query` metrics.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/single: few updates
* apply consistent formatting across panels;
* add extra panels to Performance for displaying
`vm_rows_read_per_query`, `vm_rows_scanned_per_query`,
`vm_rows_read_per_series` and `vm_series_read_per_query` metrics.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmagent: few updates
* apply consistent formatting across panels;
* add panels for showing number of samples ingested
or scraped;
* adapt resource usage panels for multiple selected jobs/instances;
* add adhoc variable;
* display vmagent's version in Stats.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmalert: few updates
* apply consistent formatting across panels;
* adapt resource usage panels for multiple selected jobs/instances;
* show vmalert version in Stats section.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: remove index filter from stats panel for DiskUsage
The diskUsage stats panel was showing disk usage without including
size of the index, which is not correct. The filter was removed
to reflect the total disk usage.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2368
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: add adhoc filter to dasbhoard variables
The adhoc filter allows to quickly apply global filters without
modifying the panels.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: add new panel `IndexDB items rate`
The new panel supposed to reflect the pressure on indexDB
caused by churn rate or new series registration.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: rm "Deferred merges" panel since it could be misleading
See more context here https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1682#issuecomment-938608067
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: replace fixed interval of `5m` for `rate` expressions
Before we used fixed `5m` interval for expressions with `rate` func.
Unfortunately, this interval wasn't a fit for all the cases. So we
switch to `$__rate_interval` instead.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: bump version requirement
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: rm `vm_indexdb_items_added_size_bytes_total` expression
Rate over `vm_indexdb_items_added_size_bytes_total` doesn't seem to be useful
on the dasbhoard panel.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The new row Caches adds more visibility for cache utilization by VM.
It replaces the old `Cache size` panel.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: plot cpu limits for vmagent, vmalert and vm-single dashboards
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* alerts: add `TooHighCPUUsage` alert for all VM components
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: bump components version requirements
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmsingle: add "Merges deferred" panel
The new panel supposed to show if there were deferred merges
due to insufficient disk space.
It goes within alerting rule which suppose to send a signal
in such cases.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmsingle: add "Cache usage" panel
The new panel supposed to show the % of the used cache
compared to allowed size by type.
It should help to determine underutilized types of caches.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmsingle: bump version requirement
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmsingle: rm alert for `vm_merge_need_free_disk_space`
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dasbhoard: replace `null` datasources
null datasource value may confuse Grafana and make it drop panel query in some
versions.
* docker: bump grafana image version
* dashboards: add URL variable selector to vmagent dashboard
* dashboards: add new panel `Remote write connection saturation` to vmagent dashboard
* alerts: add new alert for `Remote write connection saturation` panel of vmagent dashboard
* dashboards: add "Logging rate" panel to vmagent dashboard
* dashboard: update single version dash
The update contains the following changes:
* display anonymous memory usage metric. This metric suppose to reflect
memory usage of the process which can't be freed by OS;
* add legends to all panels. This is important for cases when users share
the screenshots;
* modify panels for Grafana v8.0.0
* dashboard: update single version dash tags
* dashboard: update vmagent dash
The update contains the following changes:
* display anonymous memory usage metric. This metric suppose to reflect
memory usage of the process which can't be freed by OS;
* add legends to all panels. This is important for cases when users share
the screenshots;
* modify panels for Grafana v8.0.0
* dashboard: update single node dashboard
* add number of new series created over last 24h;
* bump version requirements.
* dashboard: update vmagent dashboard
* add panel for open file descriptors;
* add panel for disk I/O;
* add panel for `vmagent_remotewrite_packets_dropped_total` metric;
* bump version requirements.
* dashboard: update single node dashboard
* add panel `Open FDs` for file descriptors metrics;
* add panel `Disk writes/reads` to show the real read/write
load on storage layer;
* add `process_resident_memory_bytes` metric to memory usage panel;
* add stats panel to show available CPUs, memory and disk space;
* rm flags panel since it didn't prove its usefulness.
* alerts: add alert for reaching FDs limit
