* vmalert: expand rule groups on anchor click
before, anchor click was only updating the URL.
To expand the group, user had to click on rule's block.
Now, group will toggle automatically.
* vmalert: allow filtering group in web UI
The new filter allows to filter groups and rules within
groups by: errors only or noMatch only.
The filtering supposed to help navigating big numbers of groups/rules.
Filtering is reflected in URL, so can be shared as a link.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously, metric `vmalert_alerting_rules_last_evaluation_series_fetched`
would be set to 0 for const expressions, because const expression do not match
any series. This may result into a confusion: no series were matched but response isn't empty.
The change updates the logic behind metric: if no series were matched but there are samples
in response - use amount of samples as number of series.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
app/vmalert: detect alerting rules which don't match any series at all
vmalert starts to understand /query responses which contain object:
```
"stats":{"seriesFetched": "42"}
```
If object is present, vmalert parses it and populates a new field
`SeriesFetched`. This field is then used to populate the new metric
`vmalert_alerting_rules_last_evaluation_series_fetched` and to
display warnings in the vmalert's UI.
If response doesn't contain the new object (Prometheus or
VictoriaMetrics earlier than v1.90), then `SeriesFetched=nil`.
In this case, UI will contain no additional warnings.
And `vmalert_alerting_rules_last_evaluation_series_fetched` will
be set to `-1`. Negative value of the metric will help to compile
correct alerting rule in follow-up.
Thanks for the initial implementation to @Haleygo
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4056
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4039
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Properly return empty slices instead of nil for `/api/v1/rules` and `/api/v1/alerts` API handlers.
This improves compatibility with Grafana.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4221
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Supports using `**` for `-rule` and `-rule.templates`: `dir/**/*.tpl` loads contents of dir and all subdirectories recursively.
See: #4041
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Artem Navoiev <tenmozes@gmail.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
Templating of `-external.alert.source` is not expected to have access to the query which was causing runtime error when query function was passed as nil.
See: #4181
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/httpserver: introduce `-http.maxConcurrentRequests` command-line flag
Introduce `-http.maxConcurrentRequests` command-line flag to protect
VM components from resource exhaustion during unexpected spikes of HTTP requests.
By default, the new flag's value is set to 0 which means no limits are applied.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/httpserver: mention http.maxConcurrentRequests in docs
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: retry datasource requests with EOF or unexpected EOF errors
Retry failed read request on the closed connection one more time.
This may improve rules execution reliability when connection
between vmalert and datasource closes unexpectedly.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: fix old tests
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Expose stats.seriesFetched at `/api/v1/query_range` responses too
for the sake of consistency.
- Initialize QueryStats when it is needed and pass it to EvalConfig then.
This guarantees that the QueryStats is properly collected when the query
contains some subqueries.
* vmalert: support logs suppressing during config reloads
The change is mostly required for ENT version of vmalert,
since it supports object-storage for config files.
Reading data from object storage could be time-consuming,
so vmalert emits logs to track the progress.
However, these logs are mostly needed on start or on
manual config reload. Printing these logs each time
`rule.configCheckInterval` is triggered would too verbose.
So the change allows to control logs emitting during
config reloads.
Now, logs are emitted during start up or when SIGHUP is receieved.
For periodicall config checks logs emitted by config pkg are suppressed.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: review fixes
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The change also introduces `List` method to `FS` interface.
The `List` method can be used for wildcard support in object storage FS.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
- Sync the description for -httpListenAddr.useProxyProtocol command-line flag at vmagent and vmauth,
so it is consistent with the description at vmauth and victoria-metrics
- Add a sample of panic text to docs/CHANGELOG.md, so it could be googled
- Mention the -httpListenAddr.useProxyProtocol command-line flag in the description for the bugfix
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3335
Each group in vmalert starts with an artifical delay to avoid
thundering herd problem. For some groups with high evaluation
intervals, the delay could be significant.
If during this delay user will remove the group from the config
and hot-reload it - vmalert will have to wait until the delay
ends. This results into slow config reloading and UI hang.
The change moves the start-delay logic back to the group's
`start` method. Now, group can immediately exit from the
delay when `group.close()` method is called.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
When group's update() or close() method is called, the group
still need to wait for its current evaluation to finish.
Sometimes, evaluation could take a significant amount of time
which slows configuration update or vmalert's graceful shutdown.
The change interrupts current evaluation in order to speed up
the graceful shutdown or config update procedures.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Document the change at docs/CHANGELOG.md
- Add `Reading rules from object storage` section to docs/vmalert.md
- Add `s3` prefix to command-line flags related to the configuration of s3 and gcs clients
- Explicitly mention that reading rules from object storage is supported only in enterprise version
* vmalert: support object storage for rules
Support loading of alerting and recording rules from object
storages `gcs://`, `gs://`, `s3://`.
* review fixes
* vmalert: use group's ID in UI to avoid collisions
Identical group names are allowed. So we should used IDs
for various groupings and aggregations in UI.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: prevent disabling state updates tracking
The minimum number of update states to track is now set to 1.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: properly update `debug` and `update_entries_limit` params on hot-reload
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: display `debug` field for rule in UI
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: exclude `updates` field from json marhsaling
This field isn't correctly marshaled right now.
And implementing the correct marshaling for it doesn't
seem right, since json representation is mostly used
by systems like Grafana. And Grafana doesn't expect this
field to be present.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* fix test for disabled state
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* fix test for disabled state
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: speed up state restore procedure on start
Alerts state restore procedure has been changed to become asynchronous.
It doesn't block groups start anymore which significantly improves vmalert's startup time.
Instead, state restore is called by each group in their goroutines after the first rules
evaluation.
While previously state restore attempt was made for all loaded alerting rules,
now it is called only for alerts which became active after the first evaluation.
This reduces the amount of API calls to the configured remote read URL.
This also means that `remoteRead.ignoreRestoreErrors` command-line flag becomes deprecated now
and will have no effect if configured.
See relevant issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2608
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* make lint happy
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Apply suggestions from code review
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
