The new flag `datasource.disableKeepAlive` allows disabling keepalive
connections. This may be useful if there are multiple datasource
replicas (e.g. vmselects) behind the HTTP balancer to avoid uneven
load spread because of long-lived connections.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: split alert's `Start` field into `ActiveAt` and `Start`
The `ActiveAt` field identifies when alert becomes active for rules
with `for > 0`. Previously, this value was stored in field `Start`.
The field `Start` now identifies the moment alert became `FIRING`.
The split is needed in order to distinguish these two moments
in the API responses for alerts.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: support specific moment of time for rules evaluation
The Querier interface was extended to accept a new argument
used as a timestamp at which evaluation should be made.
It is needed to align rules execution time within the group.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: mark disappeared series as stale
Series generated by alerting rules, which were sent to remote write
now will be marked as stale if they will disappear on the next
evaluation. This would make ALERTS and ALERTS_FOR_TIME series
more precise.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: evaluate rules at fixed timestamp
Before, time at which rules were evaluated was calculated
right before rule execution. The change makes sure
that timestamp is calculated only once per evalution round
and all rules are using the same timestamp.
It also updates the logic of resending of already resolved
alert notification.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: allow overridin `alertname` label value if it is present in response
Previously, `alertname` was always equal to the Alerting Rule name. Now,
its value can be overriden if series in response containt the different value
for this label.
The change is needed for improving compatibility with Prometheus.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: align rules evaluation in time
Now, evaluation timestamp for rules evaluates as if
there was no delay in rules evaluation. It means, that
rules will be evaluated at fixed timestamps+group_interval.
This way provides more consistent evaluation results and
improves compatibility with Prometheus,
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add metric for missed iterations
New metric `vmalert_iteration_missed_total` will show
whether rules evaluation round was missed.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: reduce delay before the initial rule evaluation in group
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: rollback alertname override
According to the spec:
```
The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label.
```
https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: throw err immediately on dedup detection
```
The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts
or add samples to samples receiver if there is more than one alert with the same labels
```
https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: cleanup
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: use strings builder to reduce allocs
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add support for `sortByLabel` template function
* vmalert: update API according to Prometheus conformance program
The changes to the API, field names and URL path has been made
according to the Prometheus specification for `alert_generator`
https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md
* vmalert: fix the timestamp of the evaluated rules
The timestamp used for alert's `EndsAt` was calculated
before sending the notification. While the correct way
is to use the timestamp taken right before rules evaluation.
* vmalert: add `-datasource.queryTimeAlignment` flag
The flag is supposed to provide ability to disable `time`
param alignment when executing rules. By default, this flag
is enabled, so it remains backward compatible.
The flag was introduced to achieve better compatibility
with Prometheus behaviour according to https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md
Signed-off-by: hagen1778 <roman@victoriametrics.com>
When using `vmalert` with older Prometheus versions, the passed
`step=2m` may be parsed by Prometheus with an err: "cannot parse \"2m0s\" to a valid duration".
In order to improve compatibility vmalert will always convert step duration to seconds.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1943
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: introduce additional HTTP URL params per-group configuration
The new group field `params` allows to configure custom HTTP URL params
per each group. These params will be applied to every request before
executing rule's expression. Hot config reload is also supported.
Field `extra_filter_labels` was deprecated in favour of `params` field.
vmalert will print deprecation log message if config file contains
the deprecated field.
`params` fields are supported by both Prometheus and Graphite datasource types.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: provide more examples for `params` field
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: set higher priority for `params` setting
If there would be a conflict between URL params set in `datasource.url` flag
and params in group definition the latter will have higher priority.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This removes the unneeded level of indirection and improves code readability.
The "prometheus" and "graphite" constants aren't going to change in the future, so there is no sense in hiding them behind constants.
* vmalert: adjust `http.Transport.MaxIdleConns` value accordingly to `http.Transport.MaxIdleConnsPerHost`
`http.Transport.MaxIdleConnsPerHost` setting is controlled by `datasource.maxIdleConnections` flag,
while `http.Transport.MaxIdleConns` is inherited from DefaultTransport and is equal to `100`.
The fix adjusts `http.Transport.MaxIdleConns` value if it is lower than `http.Transport.MaxIdleConnsPerHost`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmauth: adjust `http.Transport.MaxIdleConns` value accordingly to `http.Transport.MaxIdleConnsPerHost`
`http.Transport.MaxIdleConnsPerHost` setting is controlled by `maxIdleConnsPerBackend` flag,
while `http.Transport.MaxIdleConns` is inherited from DefaultTransport and is equal to `100`.
The fix adjusts `http.Transport.MaxIdleConns` value if it is lower than `http.Transport.MaxIdleConnsPerHost`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: allow extra GET params in datasource package
ExtraParams will be added as GET params to every HTTP request made by datasource.
The `roundDigits` param, for example, was substituted by corresponding extra param.
* vmalert: add nocache=1 param for replay process
The `nocache=1` param is VictoriaMetrics specific parameter which prevents it
from caching and boundaries aligning for queries. We set it to avoid cache
pollution in `replay` mode and also to avoid unnecessary time range boundaries
alignment.
* vmalert: mention nocache=1 in replay description
* vmalert: fix bug with unused param
* vmalert: fix mistake with object reuse while parsing response
During the refactoring, the wrong optimisations was applied in
parse function which caused metric fields reset. The change removes
optimisation.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1369
* vmalert: add test to cover multiple metrics in one response
* vmalert: support rules backfilling (aka `replay`)
vmalert can `replay` configured rules in the past
and backfill results via remote write protocol.
It supports MetricsQL/PromQL storage as data source,
and can backfill data to remote write compatible
storage.
Supports recording and alerting rules `replay`. See more
details in README.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/836
* vmalert: review fixes
* vmalert: readme fixes
The new setting `extra_filter_labels` may be assigned to group.
If it is, then all rules within a group will automatically filter
for configured labels. The feature is well-described here
https://docs.victoriametrics.com#prometheus-querying-api-enhancements
New setting is compatible only with VM datasource.
Starting from v1.56.0 VM supports `round_digits` which allows to limit
the number of digits after the decimal point in response value. The feature
can be used to reduce entropy of produced by recording rules values
and significantly improve the compression. See more details in link below.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/525
* Simplify arguments list for fn `queryDataSource` to improve readbility
* vmalert: adjust `time` param according to rule evaluation interval
With this change, vmalert will start to use rule's evaluation interval
for truncating the `time` param. This is mostly needed to produce consistent
time series with timestamps unaffected by vmalert start time. Now, timestamp
becomes predictable.
Additionally, adjustment is similar to what Grafana does for plotting range graphs.
Hence, recording rule series and recording rule expression plotted in grafana
suppose to become similar in most of cases.
* changes vmalert Querier with per rule querier
it allows to changes some parametrs based on rule setting
for instance - alert type, tenant for cluster version or event endpoint url.
* init implementation for graphite alerts
* adds graphite support for vmalert
* small fix
* changes vmalert graphite api with type
* updates tests
* small fix
* fixes graphite parse
* Fixes graphite from time
The commit adds a support for template function `query`,
`first` and `value`. The function `query` executes
a MetricsQL query for active alerts. In vmalert we
update templates on every evaluation for active alerts
to keep them up to date. With `query` func it may become
a perf issue since it will fire a query on every execution.
We should keep it in mind for now.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/539
The previous implementation treated extra labels (global and rule labels) as
separate label set to returned time series labels. Hence, time series always contained
only original labels and alert ID was generated from sorted labels key-values.
Extra labels didn't affect the generated ID and were applied on the following actions:
- templating for Summary and Annotations;
- persisting state via remote write;
- restoring state via remote read.
Such behaviour caused difficulties on restore procedure because extra labels had to be dropped
before checking the alert ID, but that not always worked. Consider the case when expression
returns the following time series `up{job="foo"}` and rule has extra label `job=bar`.
This would mean that restored alert ID will be always different to the real time series because
of collision.
To solve the situation extra labels are now always applied beforehand and `vmalert` doesn't
store original labels anymore. However, this could result into a new error situation.
Consider the case when expression returns two time series `up{job="foo"}` and `up{job="baz"}`,
while rule has extra label `job=bar`. In such case, applying extra labels will result into
two identical time series and `vmalert` will return error:
`result contains metrics with the same labelset after applying rule labels`
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/870
* app/vmalert: support multiple notifier urls (#584)
User now can set multiple notifier URLs in the same fashion
as for other vmutils (e.g. vmagent). The same is correct for
TLS setting for every configured URL. Alerts sending is done
in sequential way for respecting the specified URLs order.
* app/vmalert: add basicAuth support for notifier client (#585)
The change adds possibility to set basicAuth creds for notifier
client in the same fasion as for remote write/read and datasource.
The change adds no new functionality and aims to move flags definitions
to subpackages that are using them. This should improve readability
of the main function.
* Initial rules evaluation support.
Rules are now store alerts state in private field `alerts`. Every evaluation updates
the alerts and state. Every unique metric received from datastore represents a unique alert,
uniqueness is guaranteed by hashing ordered labelset.
* merge with master
* cleanup
* support endAt parameter as 3*evaluationInterval for active alerts
* make golint happy
