### Describe Your Changes
- Fixed the update of the relative time range when `Execute Query` is
clicked
- Optimized server requests: now, if an error occurs in the `/query`
request, the `/hits` request will not be executed.
#6345 (duplicates: #6440, #6312)
(cherry picked from commit 43342745ac)
The TryParseTimestampRFC3339Nano() must properly parse RFC3339 timestamps with timezone offsets.
While at it, make tryParseTimestampISO8601 function private in order to prevent
from improper usage of this function from outside the lib/logstorage package.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6508
This reverts commit 5ecf439078.
Reason for revert: the previous logic was correct.
The purpose of `-search.maxSamplesPerQuery` command-line flag is to limit the amounts of CPU resources,
which could be taken by a single query - see https://docs.victoriametrics.com/#resource-usage-limits .
VictoriaMetrics processes samples in blocks during querying - it reads the block, then unpacks it,
then filters out samples outside the selected time range. This means that it _spends CPU time_
on reading and unpacking of _all the samples_ in every block on the requested time range,
even if only a single sample per each block matches the given time range.
The previous logic was effectively limiting CPU time a single query could take.
The new logic fails limiting CPU time a single query could take in some pathological cases
when only a small fraction of samples per each requested block fit the requested time range.
This allows performing multiplication DoS-attacks by querying very narrow time ranges over historical blocks,
which tend to be full. For example, if the `-search.maxSamplesPerQuery` equals to a billion,
and the query requests a single sample out of 8K samples per each block, this means that the query
may unpack a billion of such blocks without exceeding the limit, e.g. it may unpack and process 8K*1e9=8e12 samples.
This is not what the resource usage limits were created for originally - see https://docs.victoriametrics.com/#resource-usage-limits
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5851
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6464
* rm extra interface method for rw Client, as it has low applicability
and doesn't fit multitenancy well
* add `GetDroppedRows` method instead
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 4ef76eed7b)
- Added a bar chart displaying the number of log entries over a time
range.
#6404
- When `_msg` is empty, all fields are displayed in a single line.
- Added double quotes when copying pairs: `key: "value"`.
- Minor style adjustments.
(cherry picked from commit 32fbffedd9)
Check for ranged vector arguments in aggregate expressions when
`-search.disableImplicitConversion` or `-search.logImplicitConversion`
are enabled.
For example, `sum(up[5m])` will fail to execute if these flags are set.
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [*] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 6149adbe10)
The limit is specified with command-line flag
`-search.maxSamplesPerQuery`.
Previously, samples might be over-counted and query can't be fixed by
reducing time range.
address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5851
(cherry picked from commit 6e395048d3)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This change fixes the following panic:
```
2024-06-04T11:16:52.899Z warn app/vmauth/auth_config.go:353 cannot discover backend SRV records for http://srv+localhost:8080: lookup localhost on 10.100.10.4:53: server misbehaving; use it literally
panic: runtime error: integer divide by zero
goroutine 9 [running]:
github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver.handlerWrapper.func1()
/Users/lhhdz/wd/projects/go/VictoriaMetrics/lib/httpserver/httpserver.go:291 +0x58
panic({0x103115100?, 0x10338d700?})
/Users/lhhdz/go/pkg/mod/golang.org/toolchain@v0.0.1-go1.22.3.darwin-arm64/src/runtime/panic.go:770 +0x124
main.getLeastLoadedBackendURL({0x0?, 0x22?, 0x1400014757b?}, 0x1400013c120?)
/Users/lhhdz/wd/projects/go/VictoriaMetrics/app/vmauth/auth_config.go:473 +0x210
main.(*URLPrefix).getBackendURL(0x140000aa080)
/Users/lhhdz/wd/projects/go/VictoriaMetrics/app/vmauth/auth_config.go:312 +0xb8
```
---------
Co-authored-by: Haley Wang <haley@victoriametrics.com>
* fixes linter error
* simplify code a bit
* fixes bug with incorrectly set configSuccess metric. It was not set to
1 in case of config rollback
Signed-off-by: f41gh7 <nik@victoriametrics.com>
When I use vminsert's `relabelConfig`, I found that now there is no
reloaded api. However, `vminsert` under `VM-Single` has it. So, I hope
to add it to the `cluster/vminster`.
---------
Signed-off-by: z-anshun <1179798460@qq.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
Add support for markdown format and emoji for the `_msg` field in the
"Group" view.
Add markdown rendering toggle. Disabled by default. Value is stored in
`localStorage`.
It is better to remove deprecated flag completely, so vmctl will
fail if this flag is used and user can immediately fix the issue.
Before, flag was ignored and it is worse then fail fast.
follow-up after 8b46bb0c41 (diff-2bfab3db5cc1baf4c6d3ff6b19901926e3bdf4411ec685dac973e5fcff1c723b)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 8d95522529)
* adds idleConnTimeout flag, which must reduce probability of `broken
pipe` and `connection reset` errors.
* one-time retry trivial network requests for the same backend
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit d44058bcd6)
* deprecate `--vm-disable-progress-bar` in favour of `--disable-progress-bar`
* new `--disable-progress-bar` consistently disables usage of progress bar
for all migration modes.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6367
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 8b46bb0c41)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
…pAuth.*
address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6329,
makes `reloadAuthKey`, `configAuthKey`, `flagsAuthKey`, `pprofAuthKey`
behavior the same way,
but keys like `-snapshotAuthKey`, `-forceMergeAuthKey` are still
protected by httpAuth.*. All the available key are listed in
https://docs.victoriametrics.com/single-server-victoriametrics/#security.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 61dce6f2a1)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Unsupported path is already handled by `lib/httpserver`.
This prevents from misleading errors in logs caused by double-writing response headers.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit a5f81f67fd)
* "*.idleConnTimeout" flags must reduce probability of `write: broken
pipe` and `read: connection reset by peer` errors Those errors may occur
if remote server closes TCP socket for connection, while it's still
exist at client.
* single time retries for `write: broken pipe` and `read: connection
reset by peer` must handle a case for incorrectly configured timeouts at
middleware proxies, mitigate minor network issues.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5661
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit b97916276f)
use GetOptionalArg instead of index to fallback to a first argument if
index is absent for remotewrite.streamaggr.config
(cherry picked from commit 7e5a206057)
It allows to create alert for possible item drops at indexdb. It may
happen, if ingested metric size exceeds max indexdb item size.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 69d244e6fb)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Update wording to highlight that cache is not persistent if flag is
value is empty. Previously, it was not clear if cache is not used at all
or just not persistent.
* It must reduce memory usage for misbehaving clients. Since
VictoriaMetrics stores sparse index inmemory.
* Reduce disk space usage for indexdb.
* Prevent possible indexDB items drops.
* It may trigger slow insert and new timeseries registration due to
default value for flag change
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6176
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This PR fixes an issue where parsing long `_msg` values caused errors,
resulting in some log records not being displayed.
The error occurred due to partial processing of strings. In some cases,
a long record could be split into multiple chunks, causing only part of
the record to be processed instead of the entire entry.
#6281
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Prevent excessive resource usage when stream aggregation config file
contains no matchers by prevent pushing data into Aggregators object.
Before this change a lot of extra work was invoked without reason.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 7ce052b32d)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Occasionally, vmagent sends empty blocks to downstream servers. If a
downstream server returns an unexpected response, vmagent gets stuck in
a retry loop. While vmagent handles 400 and 409 errors, there are
various prometheus remote write implementations that return different
error codes. For example, vector returns a 422 error. To mitigate the
risk of vmagent getting stuck in a retry loop, it is advisable to skip
sending empty blocks to downstream servers.
Co-authored-by: hao.peng <hao.peng@smartx.com>
Co-authored-by: Zhu Jiekun <jiekun.dev@gmail.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 3661373cc2)
* adds datadog extensions for statsd:
- multiple packed values (v1.1)
- additional types distribution, histogram
* adds type check and append metric type to the labels with special tag
name `__statsd_metric_type__`. It simplifies streaming aggregation
config.
* remove statsd support from cluster, since cluster doesn't support
stream aggregation.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit b2765c45d0)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Allocations are reduced by implementing custom json parser via fastjson
lib.
The change also re-uses `promInstant` object in attempt to reduce number
of
allocations when parsing big responses, as usually happens with heavy
recording rules.
```
name old allocs/op new allocs/op delta
ParsePrometheusResponse/Instant-10 9.65k ± 0% 5.60k ± 0% ~ (p=1.000 n=1+1)
```
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 4f0525852f)
Allocations are reduced by re-using the byte buffer when converting
labels to string keys.
```
name old allocs/op new allocs/op delta
GetStaleSeries-10 703 ± 0% 203 ± 0% ~ (p=1.000 n=1+1)
```
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit b0c1f3d819)
it's needed to remove Summary metric type from the global state of
metrics package. metrics package tracks each bucket of summary and
periodically swaps old buckets with new.
Simple set unregister is not enough to release memory used by Set
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6247
(cherry picked from commit 6a6e34ab8e)
* FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent.html):
allow configuring `-remoteWrite.disableOnDiskQueue` and
`-remoteWrite.dropSamplesOnOverload` cmd-line flags per each
`-remoteWrite.url`. See this [pull
request](https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6065).
Thanks to @rbizos for implementaion!
* FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent.html): add
labels `path` and `url` to metrics
`vmagent_remotewrite_push_failures_total` and
`vmagent_remotewrite_samples_dropped_total`. Now number of failed pushes
and dropped samples can be tracked per `-remoteWrite.url`.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Raphael Bizos <r.bizos@criteo.com>
(cherry picked from commit 87fd400dfc)
### Describe Your Changes
Added makefile rule for `GOARCH=loong64` to support building all
VictoriaMetrics components on the `loongarch64` platform.
### Checklist
The following checks are **mandatory**:
* [X] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: qiangxuhui <qiangxuhui@loongson.cn>
(cherry picked from commit 80f3644ee3)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This code adds Exemplars to VMagent and the promscrape parser adhering
to OpenMetrics Specifications. This will allow forwarding of exemplars
to Prometheus and other third party apps that support OpenMetrics specs.
---------
Signed-off-by: Ted Possible <ted_possible@cable.comcast.com>
(cherry picked from commit 5a3abfa041)
When at least one remote write has deduplication configured it cleans up
timeseries while they can be in use by another remote write without
deduplication
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6205
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 879771808b)
The new flag type is supposed to be used for specifying URL values which
could contain sensitive information such as auth tokens in GET params or
HTTP basic authentication.
The URL flag also allows loading its value from files if `file://`
prefix is specified. As example, the new flag type was used in
app/vmbackup as it requires specifying `authKey` param for making the
snapshot.
See related issue
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5973
Thanks to @wasim-nihal for initial implementation
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6060
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 029060af60)
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6140
We don't cover this corner case as it has low chance for reproduction.
Precisely, the requirements are following:
1. vmagent need to be configured with multiple identical `remoteWrite.url` flags;
2. At least one of the persistent queues need to be non-empty, which already
signalizes about issues with setup;
3. vmagent need to be restarted with removing of one of `remoteWrite.url` flags.
We do not document this case in vmagent.md as it seems to be a rare corner case
and its explanation will require too much of explanation and confuse users.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 4251292708)
Starting from v1.99.0 vmalert could ignore anchors pointing to specific
rule groups if `search` param was present in URL.
This change makes anchors compatible with `search` param in UI.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 5f487c7090)
Stream aggregation may yield inaccurate results if it processes incomplete data.
This issue can arise when data is sourced from clients that maintain a queue of unsent data, such as Prometheus or vmagent.
If the queue isn't fully cleared within the aggregation interval, only a portion of the time series may be included in that period, leading to distorted calculations.
To mitigate this we add an option to ignore first N aggregation intervals. It is expected, that client queues
will be cleared during the time while aggregation ignores first N intervals and all subsequent aggregations
will be correct.
(cherry picked from commit c0e4ccb7b5)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The memory usage for plain sync.Pool doesn't increase comparing to the memory usage for the hybrid scheme,
so it is better to use plain sync.Pool in order to simplify the code and make it more readable and maintainable.
This is a follow-up for c22da2f917
Data ingestion benchmark doesn't show memory usage difference between two approaches,
so let's use simpler approach in order to improve code readability and maintainability.
This is a follow-up for 77c597738c
This scheme was used for reducing memory usage when vmagent runs on a machine with big number of CPU cores
and the ingestion rate isn't too big. The scheme with channel-based pool could reduce memory usage,
since it minimizes the number of PushCtx structs in the pool in this case.
Performance tests didn't reveal significant difference in memory usage under both low and high ingestion rate
between plain sync.Pool and the current hybrid scheme, so replace the scheme with plain sync.Pool in order
to simplify the code.
There was a sleep statement in the test, waiting for Group
to perform a couple of evaluation. But looks like
it worked unreliable for some CI tests like the one below
https://github.com/VictoriaMetrics/VictoriaMetrics/actions/runs/8718213844/job/23915007958?pr=6115
This commit changes the sleep statement on a function that
waits for a specific number of evaluations. It should make this
test faster in general case, and more reliable for slow environemnts.
This simplifies further maintenance and opens doors for additional config options
supported by lib/promauth. For example, an ability to specify client TLS certificates.
- Use exact matching by default for the query arg value provided via arg=value syntax at src_query_args.
Regex matching can be enabled by using =~ instead of = . For example, arg=~regex.
This ensures that the exact matching works as expected without the need to escape special regex chars.
- Add helper functions for creating QueryArg, Header and Regex structs in tests.
This improves maintainability of the tests.
- Remove url.QueryUnescape() call on the url in TestCreateTargetURLSuccess(), since this is bogus approach.
The url.QueryUnescape() must be applied to individual query args, and it mustn't be applied to the whole url,
since in this case it may perform invalid unescaping in the context of the url, or make the resulting url invalid.
While at it, properly marshal all the fields inside UserInfo config to yaml in tests.
Previously Header and QueryArg structs were improperly marshaled because the custom MarshalYAML
is called only on pointers to Header and QueryArg structs. This improves test coverage.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6070
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6115
* app/vmauth: do not increment backend_errors when hitting concurrency limit
Previously, both "vmauth_concurrent_requests_limit_reached_total" and "vmauth_user_request_backend_errors_total" were incremented.
This was based on the assumption that if concurrency limit is hit the backend must be failing to handle the request thus meaning an error.
This assumption does not work in case the endpoint can be overloaded by the misbehaving client sending too many requests within the timeframe.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5565
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* any status code from the range 200-299 from alertmanager to vmalert is not considered an error from now on (#6110)
* add changelog
(cherry picked from commit 7308bad777)
* vmui: fix parsing of fractional values
* vmui/vmanomaly: update display logic to align with vmanomaly /query_range API
* vmui/vmanomaly: rename flag anomalyView to isAnomalyView
(cherry picked from commit f06f55edb6)
- Automatically reload changed TLS root CA pointed by -remoteWrite.tlsCAFile command-line flag
- Automatically reload changed TLS root CA configured via oauth2.tsl_config.ca_file option at -promscrape.config
- Document the change as a feature instead of a bug at docs/CHANGELOG.md
- Simplify the code at lib/promauth, which is responsible for reloading changed TLS root CA files.
- Simplify the usage of lib/promauth.Config.NewRoundTripper() - now it accepts the base http.Transport
instead of a callback, which can change the internal http.Transport.
- Reuse the default tls config if lib/promauth.Config doesn't contain tls-specific configs.
This should reduce memory usage a bit when tls isn't used for scraping big number of targets.
- Do not re-read TLS root CA files on every processed request. Re-read them once per second.
This should reduce CPU usage when scraping big number of targets over https.
- Do not store cert.pem and key.pem files in TestTLSConfigWithCertificatesFilesUpdate, since they can be loaded
from byte slices via crypto/tls.X509KeyPair().
- Remove obsolete comparisons of string representations for authConfig and proxyAuthConfig at areEqualScrapeConfigs().
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5725
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5526
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2171
- Fix docs for new functions at app/vmselect/graphite/functions.json
- Properly drain series lists on errors in aggregateSeriesListsGeneric() and aggregateSeriesList()
- Add links to docs for the added functions at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5809
- Allow specifying only a single HTTP header for reading auth tokens via -httpAuthHeader command-line flag.
This is better from security PoV, since this prevents from accidental reading of auth token from undesired
HTTP header. By default the -httpAuthHeader equals to Authorization. When it is overridden, then
auth token isn't read from Authorization header - it is read only from the specified header.
- Document the -httpAuthHeader command-line flag at https://docs.victoriametrics.com/vmauth/#reading-auth-tokens-from-other-http-headers
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6009
This reverts commit cb23685681.
Reason for revert: the "fix" may hide programming bugs related to incorrect creation of folders
before their use. This may complicate detecting and fixing such bugs in the future.
There are the following fixes for the issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5985 :
- To configure the OS to do not drop data from the system-wide temporary directory (aka /tmp).
- To run VictoriaMetrics with -cacheDataPath command-line flag, which points to the directory,
which cannot be removed automatically by the OS.
The case when the user accidentally deletes the directory with some files created by VictoriaMetrics
shouldn't be considered as expected, so VictoriaMetrics shouldn't try resolving this case automatically.
It is much better from operation and debuggability PoV is to crash with the clear `directory doesn't exist` error
in this case.
The remotewrite.Stop() expects that there are no pending calls to TryPush().
This means that the ingestionRateLimiter.Register() must be unblocked inside TryPush() when calling remotewrite.Stop().
Provide remotewrite.StopIngestionRateLimiter() function for unblocking the rate limiter before calling the remotewrite.Stop().
While at it, move the rate limiter into lib/ratelimiter package, since it has two users.
Also move the description of the feature to the correct place at docs/CHANGELOG.md.
Also cross-reference -remoteWrite.rateLimit and -maxIngestionRate command-line flags.
This is a follow-up for 02bccd1eb9
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5900
* lib/storage: adds metrics for downsampling
vm_downsampling_partitions_scheduled - shows the number of parts, that must be downsampled
vm_downsampling_partitions_scheduled_size_bytes - shows total size in bytes for parts, the must be donwsampled
These two metrics answer the questions - is downsampling running? how many parts scheduled for downsampling and how many of them currently downsampled? Storage space that it occupies.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2612
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Make the configuration more clear by accepting the list of ignored labels during sharding
via a dedicated command-line flag - -remoteWrite.shardByURL.ignoreLabels.
This prevents from overloading the meaning of -remoteWrite.shardByURL.labels command-line flag.
- Removed superfluous memory allocation per each processed sample if sharding by remote storage is enabled.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5938
* vmalert: fix sending alert messages
1. fix `endsAt` field in messages that send to alertmanager, previously rule with small interval could never be triggered;
2. fix behavior of `-rule.resendDelay`, before it could prevent sending firing message when rule state is volatile.
* docs: update changelog notes
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
During shutdown period of vmalert, remotewrite client retrieve all pending time series from buffer queue, compose them into 1 batch and execute remote write.
This final batch may exceed the limit of -remoteWrite.maxBatchSize, and be rejected by the receiver (gateway, vmcluster or others).
This changes ensures that even during shutdown vmalert won't exceed the max batch size limit for remote write
destination.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6025
(cherry picked from commit 623d257faf)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
To horizontally scale streaming aggregation, you might want to deploy a separate hashing tier
of vmagents that route to a separate aggregation tier. The hashing tier should shard by all labels
except the instance-level labels, to ensure the input metrics are routed correctly to the aggregator
instance responsible for those labels.
For this to achieve we introduce `remoteWrite.shardByURL.inverseLabels` flag to inverse logic of `remoteWrite.shardByURL.labels`
---------
Co-authored-by: Eugene Ma <eugene.ma@airbnb.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit 166b97b8d0)
vmselect uses a cache folder in file system for two purposes:
1. Storing rollup cache results on shutdown;
2. Storing temporary search results from vmstorage during query executions.
It could happen that cache folder is deleted accidentally by user, or by OS
during cleanup routines. This would cause vmselect to:
1. panic on /metrics call, because `MustGetFreeSpace` will fail;
2. return query error user, as it won't be able to store temporary search results.
The changes in this commit are the following:
1. Make `MustGetFreeSpace` to try re-creating the cache folder if it is missing;
2. Make vmselect to try re-creating the cache folder if it can't persist tmp search
results.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5985
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
(cherry picked from commit cb23685681)
* [vmagent] added ingestion rate limiting with new flag `-maxIngestionRate`. This flag can be used to limit the number of samples ingested by vmagent per second. If the limit is exceeded, the ingestion rate will be throttled.
* fix changelog
* fix review comment
(cherry picked from commit 02bccd1eb9)
When `--vm-native-step-interval` is specified, explore phase will be executed
within specified intervals. Discovered metric names will be associated with
time intervals at which they were discovered. This suppose to reduce number
of requests vmctl makes per metric name since it will skip time intervals
when metric name didn't exist.
This should also reduce probability of exceeding complexity limits
for number of selected series in one request during explore phase.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5369
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 5f8b91186a)
It is assumed that URLPrefix.busOriginal will be initialized
durin Unmarshal of the config. But in tests we set fields manually,
so this field never get initialized properly.
Fixes the error `panic: runtime error: integer divide by zero`
at `vmauth.getLeastLoadedBackendURL`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit cb1e618a16)
VictoriaMetrics destination is specified via `--vm-*` cmd-line flags
and is used in opentsdb, influx, prometheus, remote-read modes.
updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5426
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 0b7ce70df4)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* fix typos in flags description
* move the change to #tip section in changelog
b9f7c3169a
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 83a8c24281)
The `match[]` filter is mandatory at /api/v1/series, so it mustn't be dropped here.
There is no sense in dropping `match[]` filter together with `extra_label` and `extra_filters[]`
at /api/v1/labels and /api/v1/label/.../values if -search.ignoreExtraFiltersAtLabelsAPI commnad-line flag is set,
since:
- the `match[]` filter triggers slow path at these APIs;
- the `extra_label` and `extra_filters[]` filters narrow down the number of matched time series,
so they improve performance comparing to the case when only `match[]` filter is left,
while `extra_label` and `extra_filters[]` filters are dropped.
This is a follow-up for 0b7a23a91d
Improved trace display for better visual separation of branches:
* Increased left padding for each element
* Added padding for the last element in the branch
For example, if `interval: 1m`, then data flush occurs at the end of every minute,
while `interval: 1h` leads to data flush at the end of every hour.
Add `no_align_flush_to_interval` option, which can be used for disabling the alignment.
