The new panels have been added to the vmstorage and drilldown rows.
`Disk space usage %` is supposed to show disk space usage percentage.
This panel is now also referred by `DiskRunsOutOfSpace` alerting rule.
This panel has Drilldown option to show absolute values.
`Disk space usage % by type` shows the relation between datapoints
and indexdb size. It supposed to help identify cases when indexdb
starts to take too much disk space.
This panel has Drilldown option to show absolute values.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The change list is the following:
* bump Grafana version to 9.2.6;
* replace old "Graph" panel with "TimeSeries" panel;
* show % usage of Mem and CPU additionally to of absolute values;
* `Caches` row was removed. All needed info for caches is now part of `Troubleshooting`;
* add Annotations for Alert triggers. Not all alerts are supposed to be displayed
on the dashboard, but only those with label `show_at: dashboard`.
See `alerts.yml` change.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The purpose of the update is to make the dash more usable
for large installations with many instances. Panels which showed
metrics per-instance (Mem, CPU) now are showing metrics per-job or min/max/avg
aggregations in % instead. This supposed to help immediately to identify
resource shortage and remain usable for small and big installations.
For cases when detailed info is needed, to the bottom of the dashboard
a new row `Drilldown` was added. Panels like Mem or CPU now contain
a `data-link` named `Drilldown` (cis shown on line click) which takes
user to more detailed panel.
The change list is the following:
* bump Grafana version to 9.1.0;
* replace old "Graph" panel with "TimeSeries" panel;
* improve Uptime panel to show number of instances per job;
* show % usage of Mem and CPU instead of absolute values;
* `Caches` row was removed. All needed info for caches is now part of `Troubleshooting`;
* add `Drilldown` section for detailed resource usage;
* add Annotations for Alert triggers. Not all alerts are supposed to be displayed
on the dashboard, but only those with label `show_at: dashboard`.
See `alerts-cluster.yml` change.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The default list of alerting rules contains the basic
rules for checking vmalert's health state and is recommended
to use for monitoring vmalert deployments.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* deployment/docker/docker-compose-cluster.yml: bump VictoriaMetrics Cluster components to the latest v1.83.0 version
* deployment/docker/docker-compose.yml: bump VictoriaMetrics Single node and vmutils to the latest v1.83.0 version
Previously the `quotesEscape` function was escaping only double quotes.
This wasn't enough, since the input string could contain other special chars,
which must be escaped when put inside JSON string. For example, carriage return and line feed chars (\n\r),
backslash char, etc. This led to the following issues, which were improperly fixed:
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/890 - this issue
was "fixed" by introducing the `crlfEscape` function, which led to unnecessary
complications in user templates, while not fixing various corner cases
such as backslash chars in the input string.
See 1de15ad490
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3139 - this issue
was "fixed" by urlencoding the whole string passed to -external.alert.source
command-line flag. This led to invalid urls, which couldn't be parsed by Grafana.
See 00c838353d
and 4bd0244599
This commit properly encodes the input string passed to `quotesEscape`, so it can be safely embedded inside JSON strings.
This commit deprecates crlfEscape template function and adds the following new template functions:
- strvalue and stripDomain - these functions are supported by Prometheus, so they were added
for compatibility purposes.
- jsonEscape and htmlEscape for converting the input string to valid quoted JSON string
and for html-escaping the input string, so it could be safely embedded as a plaintext
into html.
This commit also documents all supported template functions at https://docs.victoriametrics.com/vmalert.html#template-functions
The deprecated crlfEscape function isn't documented on purpose, since its usefulness is negative in general case.
Cluster components always have `-cluster` suffix. The change fixes
incorrect image tag in docker-compose manifest.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* deployment/docker/docker-compose.yml: adds version tags for VictoriaMetrics containers
* deployment/docker/docker-compose-cluster.yml: adds version tags for VictoriaMetrics containers
* deployment/docker: move cluster compose env to master branch
The change supposed to simplify the process of maintaining for
single/cluster docker-compose envs, alerts, dashboards. It also
supposes to reduce confusion for users when looking for cluster
related alerts/configs.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* deployment/docker: move cluster compose env to master branch
Review updates.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The `-mod=vendor` is automatically set when there is a `vendor` directory
starting from Go1.14 - see https://go.dev/doc/go1.14#go-command
Since the minimum supported Go version for VictoriaMetrics is Go1.17,
then the `-mod=vendor` option is no longer needed.
* deployment/docker/Makefile: added docker-scan
docker-scan based on native 'docker scan' function that use snyk.io, see https://docs.docker.com/engine/scan/
* set to call 'docker-scan after release binaries but before publishing
The new metric `vmagent_remotewrite_queues` exports a static value of
number of configured remote write queus. This metric is useful to
calculate total saturation per each configured URL with given number
of queues. See corresponding changes to vmagent alerts and dashboard.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The negative value for ETA can happen when deduplication is enabled
and `rate` over `vm_deduplicated_samples_total` becomes bigger
than actual ingestion rate.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
alerts: filter out non error log messages for `TooManyLogs`
Info and Warn error levels aren't always a result of malfunctioning
or faulty state. So we filter them out.
* dashboards: add `CPU percentage` panel for cluster dashboards
The new panel `CPU percentage` was added instead if adding a limit
to the existing `CPU` panel because dasbhoard may display big number
of components each with own limits. The separate panel should provide
a clear display of CPU load.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: sync vmagent and vmalert changes from single version
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docker: remove unsupported param from vmagent config
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* alerts: add `TooHighCPUUsage` alert for all VM components
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* adds CGO build for arm64
it must improve performance for arm64 based deployments of vmstorage and
vmsingle for 15-20%
it depends on gozstd package update for correct musl gozstd vendoring
* typo fixes
* docs/CHANGELOG.md: document the change
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* dashboards/vmagent: shuffle panels for better visibility
More important error/dropped panels were moved higher on the main row.
Network usage panel moved to Resource usage row.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmagent: add Troubleshooting row to show top 5 instances/jobs by churn rate
New panels are supposed to show top 5 jobs or targets which generate the most
of the churn rate. They were placed into a new row "Troubleshooting".
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmagent: add panels for showing persistent queue saturation
New panels were added to Torubleshooting row to show the persistent queue
saturation. The corresponding alerts were added and linked to these
panels as well.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmagent: add alert "RejectedRemoteWriteDataBlocksAreDropped"
New alert suppose to send a notification when vmagent starts to drop
data blocks rejected by configured remote write destiantion.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Updated docker-compose.yml
Added one more Vmstorage to compose and pointed vmselect and vminsert to it.
* Update prometheus.yml
According to requested changes for new vmstorage
* Update docker-compose
Added port mapping
* Updated docker-compose
Set same ports for both storages
* Update prometheus.yml
Changed target for vmstorage1
* Updated docker compose
Changed the flags for vmstorage1
* Update docker compose
Changed flags for vmisert and vmselect to point to vmstorage1
* Update docker compose
Made the vmstorage names uniform
* Update prometheus.ymk
* Update docker-compose.yml
Removed additional flags as they are using default values.
* Update prometheus.yml
Put vmstorage targets under the same job
* Update prometheus.yml
Changed targets format
* Update docker-compose.yml
Set two different volumes for every vmstorage node
* Update deployment/docker/prometheus.yml
* Apply suggestions from code review
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* dasbhoard: replace `null` datasources
null datasource value may confuse Grafana and make it drop panel query in some
versions.
* docker: bump grafana image version
* dashboards: add URL variable selector to vmagent dashboard
* dashboards: add new panel `Remote write connection saturation` to vmagent dashboard
* alerts: add new alert for `Remote write connection saturation` panel of vmagent dashboard
* dashboards: add "Logging rate" panel to vmagent dashboard
* vmalert: remove `vmalert_execution_duration_seconds` metric
The summary for `vmalert_execution_duration_seconds` metric gives no additional
value comparing to `vmalert_iteration_duration_seconds` metric.
* vmalert: update config reload success metric properly
Previously, if there was unsuccessfull attempt to reload config and then
rollback to previous version - the metric remained set to 0.
* vmalert: add Grafana dashboard to overview application metrics
* docker: include vmalert target into list for scraping
* vmalert: extend notifier metrics with addr label
The change adds an `addr` label to metrics for alerts_sent and alerts_send_errors
to identify which exact address is having issues.
The according change was made to vmalert dashboard.
* vmalert: update documentation and docker environment for vmalert's dashboard
Mention Grafana's dashboard in vmalert's README in a new section #Monitoring.
Update docker-compose env to automatically add vmalert's dashboard.
Update docker-compose README with additional info about services.
Original query can't be executed via PromQL which results in error
if expression is evaluated by Prometheus. The new expression is
compatible with both engines.
The archive contains the following executables for Windows:
* vmagent
* vmalert
* vmauth
* vmctl
Other components - vmbackup, vmrestore, victoria-metrics - aren't supported for Windows yet
If docker app is upgraded from root to non-root, then the data pointed by `-storageDataPath` or similar flags
becomes denied to non-root user after the upgrade. This breaks upgrade path. So revert back to default root user
for docker apps.
Users may explicitly execute `docker run --user <non_root_user>` for running docker apps under non-root user.
The `provisioning/dashboards` folder should be already mounted on the previous line.
This should fix the `/bin/sh: can't create dashboards/vm.json: Permission denied` error on `docker-compose up`
