* vmalert: correctly return error for RW failures
By mistake, in 0989649ad0 the error
for remote write failures weren't return to user.
This change fixes it.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The main purpose of this command-line flag is to increase the lifetime of low-end flash storage
with the limited number of write operations it can perform. Such flash storage is usually
installed on Raspberry PI or similar appliances.
For example, `-inmemoryDataFlushInterval=1h` reduces the frequency of disk write operations
to up to once per hour if the ingested one-hour worth of data fits the limit for in-memory data.
The in-memory data is searchable in the same way as the data stored on disk.
VictoriaMetrics automatically flushes the in-memory data to disk on graceful shutdown via SIGINT signal.
The in-memory data is lost on unclean shutdown (hardware power loss, OOM crash, SIGKILL).
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3337
The recent change in modifying default value
of `datasource.queryStep` flag resulted in situation
where replay mode was always running queries with
step=`datasource.queryStep`. When it should always
use rule's evaluation interval.
The fix is related not to replay mode only, but
for all Range requests. Now step param is set
individually for each mode.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmalert: add `remoteWrite.sendTimeout` command-line flag to configure timeout for sending data to `remoteWrite.url`
* vmalert: remove WriteTimeout from clients Cfg
No need to have it as a part of configuration struct:
* the client isn't used by other packages;
* there are no internal tests to check the WriteTimeout.
* vmalert: remove DisablePathAppend from clients Cfg
No need to have it as a part of configuration struct:
* the client isn't used by other packages;
* there are no internal tests to check the DisablePathAppend.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
- Return meta-labels for the discovered targets via promutils.Labels
instead of map[string]string. This improves the speed of generating
meta-labels for discovered targets by up to 5x.
- Remove memory allocations in hot paths during ScrapeWork generation.
The ScrapeWork contains scrape settings for a single discovered target.
This improves the service discovery speed by up to 2x.
* flag reference update
there is no flag `-datasource.disablePathAppend` and datasource actually checking for `-remoteRead.disablePathAppend`
* update source for doc as well
* {app/vmstorage,app/vmselect}: add API to get list of existing tenants
* {app/vmstorage,app/vmselect}: add API to get list of existing tenants
* app/vmselect: fix error message
* {app/vmstorage,app/vmselect}: fix error messages
* app/vmselect: change log level for error handling
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
The default list of alerting rules contains the basic
rules for checking vmalert's health state and is recommended
to use for monitoring vmalert deployments.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docs/operator: change VMAgentRemoteWriteSettings.MaxDiskUsagePerURL type from int32 to int64
* docs: operator updates api description
Co-authored-by: f41gh7 <nik@victoriametrics.com>
- Remove trailing whitespace at the end of lines
- Remove redundant sentence stating that time series matching the given selector will be deleted.
It should be clear from the surrounding context.
The issue was in the `labels := dst[offset:]` line in the beginning of appendExtraLabels() function.
The `dst` may be re-allocated when adding extra labels to it. In this case the addition of `exported_`
prefix to labels inside `labels` slice become invisible in the returned `dst` labels.
While at it, properly handle some corner cases:
- Add additional `exported_` prefix to clashing metric labels with already existing `exported_` prefix.
- Store scraped metric names in `exported___name__` label if scrape target contains `__name__` label.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3278
Thanks to @jplanckeel for the initial attempt to fix this issue
at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/3281
Previously the `quotesEscape` function was escaping only double quotes.
This wasn't enough, since the input string could contain other special chars,
which must be escaped when put inside JSON string. For example, carriage return and line feed chars (\n\r),
backslash char, etc. This led to the following issues, which were improperly fixed:
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/890 - this issue
was "fixed" by introducing the `crlfEscape` function, which led to unnecessary
complications in user templates, while not fixing various corner cases
such as backslash chars in the input string.
See 1de15ad490
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3139 - this issue
was "fixed" by urlencoding the whole string passed to -external.alert.source
command-line flag. This led to invalid urls, which couldn't be parsed by Grafana.
See 00c838353d
and 4bd0244599
This commit properly encodes the input string passed to `quotesEscape`, so it can be safely embedded inside JSON strings.
This commit deprecates crlfEscape template function and adds the following new template functions:
- strvalue and stripDomain - these functions are supported by Prometheus, so they were added
for compatibility purposes.
- jsonEscape and htmlEscape for converting the input string to valid quoted JSON string
and for html-escaping the input string, so it could be safely embedded as a plaintext
into html.
This commit also documents all supported template functions at https://docs.victoriametrics.com/vmalert.html#template-functions
The deprecated crlfEscape function isn't documented on purpose, since its usefulness is negative in general case.
This reverts commit 00c838353d.
Reason for revert: it incorrectly fixes the issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3139 .
Now `-external.alert.source=explore?orgId=1&left=...` is converted to the following invalid url, which cannot be handled by Grafana:
https://grafana.example.com/explore%3ForgId%3D1%26left%3D...
The next commit will contain the correct fix of the issue - the `quotesEscape` function must
properly escape the string, so it could be embedded into JSON string. This function must
properly escape \n\r chars too. In this case the `crlfEscape` function becomes unnecessary.
Actually, the next commit makes the `crlfEscape` function deprecated.
The searchTSIDs function was searching for metricIDs matching the the given tag filters
and then was locating the corresponding TSID entries for the found metricIDs.
The TSID entries aren't needed when searching for time series names (aka MetricName),
so this commit removes the uneeded TSID search from the implementation of /api/v1/series API.
This improves perfromance of /api/v1/series calls.
This commit also improves performance a bit for /api/v1/query and /api/v1/query_range calls,
since now these calls cache small metricIDs instead of big TSID entries
in the indexdb/tagFilters cache (now this cache is named indexdb/tagFiltersToMetricIDs)
without the need to compress the saved entries in order to save cache space.
This commit also removes concurrency limiter during searching for matching time series,
which was introduced in 8f16388428, since the concurrency
for all the read queries is already limited with -search.maxConcurrentRequests command-line flag.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/648
The message about dropped data still remains at `error` level.
The change supposed to make log message more clear about how
serious it is.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* feat: add maximum display series by tabs
* feat: add warning on PredefinedPanels.tsx
* docs/CHANGELOG.md: vmui limit number of plotted series
* docs/CHANGELOG.md: vmui limit number of plotted series
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* Multi retention standardization of docs
While reading through the docs the implementation details had different formatting for storageNode. This standardizes them and adds a link to the retention docs.
* Update docs/guides/guide-vmcluster-multiple-retention-setup.md
Co-authored-by: Aliaksandr Valialkin <valyala@gmail.com>
The default value of `-datasource.queryStep` has changed, so we update
the troubleshooting docs accordingly.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Sort labels explicitly after calling the ParsedConfigs.Apply() when needed.
This reduces CPU usage when performing metric-level relabeling, where labels' sorting isn't needed.
Previously the `__address__` label could contain only `host:port` part of the target url,
while the scheme and metrics path were obtained from `__scheme__` and `__metrics_path__`
labels. Now it is possible to set the full url in `__address__` label.
This makes valid the following scrape config, which is frequently used by novice users:
scrape_configs:
- job_name: foo
static_configs:
- targets:
- http://host1/metrics1
- https://host2/metrics2
* Optimize fast path for /api/v1/import when importing numeric values
* Move the docs about the change from features to bugfixes at docs/CHANGELOG.md
* Update tests at lib/protoparser/vmimport
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3161
* app/vmselect: properly work when export import json from `api/v1/{export, import}` API
* app/vmselect: update convert function
* app/vmselect: export null if `math.IsNaN(v)`
* app/vmselect: get float from json
* lib/protoparser: add test
* docs: add change log
* lib/protoparser: make export import api compatible
* Document the addition of Azure blob storage support in vmbackup / vmrestore
* List the supported storage system types at docs/vmrestore.md
* Mention about azblob storage system support at -src and -dst command-line flags
for vmbackup / vmrestore tools.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1029
* Use vm_account_id and vm_project_id labels to be consistent with https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#multitenancy-via-labels
* Document the feature that vmalert now exposes vm_account_id and vm_project_id
labels if -clusterMode is set.
* Use literal strings instead of string constants for vm_account_id and vm_project_id.
This improves code readability.
The change is supposed to provide additional flexibility for generating alert's
source link based on label values.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The `docs-sync` command was updated to modify images path
for assets in `docs/` folder. The change allows to refer images from `docs`
without copying them to the root folder.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Allow configuring authorization params per list of targets
in vmalert's notifier config for `static_configs`.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2690
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vminsert: allows parsing tenant id from labels
it should help mitigate issues with vmagent's multiTenant mode, which works incorrectly at heavy load
and it cannot handle more then 100 different tenants.
This functional hidden with flag and do not change vminsert default behaviour
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2970
* Update docs/Cluster-VictoriaMetrics.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* wip
* app/vminsert/netstorage: clean remaining labels in order to free up GC
* docs/Cluster-VictoriaMetrics.md: typo fix
* wip
* wip
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Cache `action: replace` results for non-trivial regexs and return them next time
instead of performing CPU-intensive regex replacement.
Optimize also `action: labelmap_all` and `action: replace_all` in the same way.
Previously empty series (e.g. series with all NaN samples) were passed to aggregate functions.
Such series must be ingored by all the aggregate functions.
So it is better from consistency PoV filtering out empty series before applying aggregate functions.
* app/vmselect: ignore empty series for `limit_offset`
VictoriaMetrics doesn't return empty series (with all NaN values) to
the user. But such series are filtered after transform functions.
It means `limit_offset` will account for empty series as well.
For example, let's consider following data set:
```
time series:
foo{label="1"} NaN, NaN, NaN, NaN // empty series
foo{label="2"} 1, 2, 3, 4
foo{label="3"} 4, 3, 2, 1
```
When user requests all series for metric `foo` the empty series
will be filtered out:
```
/query=foo:
foo{label="v2"} 1, 2, 3, 4
foo{label="v3"} 4, 3, 2, 1
```
But `limit_offset(1, 1, foo)` is applied to original series, not filtered yet.
So it will return `foo{label="v2"}` (skips the first in list)
```
/query=limit_offset(1, 1, foo):
foo{label="v2"} 1, 2, 3, 4
```
Expected result would be to apply `limit_offset` to already filtered list,
so in result we receive `foo{label="v3"}`:
```
/query=limit_offset(1, 1, foo):
foo{label="v3"} 4, 3, 2, 1
```
The change does exactly that - filters empty series before applying `limit_offset`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmselect: ignore empty series for `limit_offset`
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/{httpserver,netutil}: allow to define min and max TLS version of the http server
* lib/httpserver: added descriptions about tls supported versions
* lib/netutil: check minimal tls version, added supported tls versions to error
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Clarify the description for -datasource.queryStep command-line flag
- Consistently use a single dash in front of -datasource.queryStep command-line flag
- Update -help output at docs/vmalert.md
- Consistently use single dash in front of command-line flags instead of double dashes.
- Add a warning that too small -search.latencyOffset may lead to incomplete query results.
Change default value for command-line flag `datasource.queryStep` from `0s` to `5m`.
Param `step` is added by vmalert to every rule evaluation request sent to datasource.
Before this change, `step` was equal to group's evaluation interval by default.
Param `step` for instant queries defines how far VM can look back for the last written data point.
The change supposed to improve reliability of the rules evaluation when evaluation interval
is lower than scraping interval.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* deployment/docker: move cluster compose env to master branch
The change supposed to simplify the process of maintaining for
single/cluster docker-compose envs, alerts, dashboards. It also
supposes to reduce confusion for users when looking for cluster
related alerts/configs.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* deployment/docker: move cluster compose env to master branch
Review updates.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: always re-evaluate Annotations
Previously, Annotations were evaluated only:
1. On alert creating.
2. On alert's value change.
This is premature optimization. It was assumed that since annotations
could contain only text with alert's labels or value - there is no need
in spending resources to re-compile Annotations.
Later, template function `query` was added, which can execute
arbitrary queries and return different results on every evaluation.
So if it was used in annotations, it would be executed only on init
or value change.
Another case when optimization caused an issue - annotations hot reload.
In this case, annotations of the active alert won't change even if Rule's
annotations were changed.
This fix enables Annotations re-evaluation on each iteration to resolve
issues above. It would have some impact on performance, but it is unlikely
it will be noticeable.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add tp Changelog
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmselect/promql: add alphanumeric sort by label (sort_by_label_numeric)
* vmselect/promql: fix tests, add documentation
* vmselect/promql: update test
* vmselect/promql: update for alphanumeric sorting, fix tests
* vmselect/promql: remove comments
* vmselect/promql: cleanup
* vmselect/promql: avoid memory allocations, update functions descriptions
* vmselect/promql: make linter happy (remove ineffectual assigment)
* vmselect/promql: add test case, fix behavior when strings are equal
* vendor: update github.com/VictoriaMetrics/metricsql from v0.44.1 to v0.45.0
this adds support for sort_by_label_numeric and sort_by_label_numeric_desc functions
* wip
* lib/promscrape: read response body into memory in stream parsing mode before parsing it
This reduces scrape duration for targets returning big responses.
The response body was already read into memory in stream parsing mode before this change,
so this commit shouldn't increase memory usage.
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
vmalert: add experimental feature of storing Rule's evaluation state
The new feature keeps last 20 state changes of each Rule
in memory. The state are available for view on the Rule's
view page. The page can be opened by clicking on `Details`
link next to Rule's name on the `/groups` page.
States change suppose to help in investigating cases when Rule
doesn't generate alerts or records.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The reason is to cover vulnerability GO-2022-0969
Found in: net/http@go1.18.5
Fixed in: net/http@go1.19.1
More info: https://pkg.go.dev/vuln/GO-2022-0969
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This reduces scrape duration for targets returning big responses.
The response body was already read into memory in stream parsing mode before this change,
so this commit shouldn't increase memory usage.
- Rename logDebug() to logDebugf() and pass format string together
with format args directly to logDebugf(). This eliminates fmt.Sprintf()
overhead at logDebug() call site when debugging is disabled.
- Format labels in debug message in Prometheus format, e.g. {label1="value1",...labelN="valueN"}
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3025
* vmalert: add `debug` mode for alerting rules
Debug information includes alerts state changes and requests
sent to the datasource. Debug can be enabled only on rule's
level. It might be useful for debugging unexpected
behaviour of alerting rule.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3025
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: review fixes
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update app/vmalert/alerting.go
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* vmalert: go fmt
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
The automated push of release tags to Github require specifying the remote repository name
when doing `git push <remote-repo-name> v1.xx.y`.
The remote repository name can differ in different environments,
so it cannot be put into Makefile rule.
TODO: create a Makefile rule, which generates standard remote names for public
and private repositories in Git, so `git push` for release tags could be automated then.
