The cumulative number of active merges could be red herring
as it its value depends on the number of vmstorages.
For example, vmstorage could be added or removed and this will affect
the panel.
Or, each vmstorage could start a merging process (i.e. for downsampling)
and visiually it could look like a massive change.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 035de57e5e)
* use docs.victoriametrics.com instead of github docs
* add links to common terms used in VictoriaMetrics
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* add more details to changelog
* simplify panels description
* remove capacity planning recommendation, as it proves it incompetent
Signed-off-by: hagen1778 <roman@victoriametrics.com>
During background downsampling, rate(vm_deduplicated_samples_total{type="merge"}) could be much bigger than
rate(vm_rows_added_to_storage_total) and it could last quite some time,
which causes negative values of Storage full ETA and confuses users, see playground.
Instead of trying to get more accurate results during downsampling, I think it's ok to ignore
vm_deduplicated_samples_total at all, it's more reasonable to see Storage full ETA increase after downsampling.
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
It should help identifying cases when too much CPU is spent on garbage collection,
and advice users on how this can be addressed.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* add panels for detailed visualization of traffic usage between vmstorage, vminsert, vmselect
components and their clients. New panels are available in the rows dedicated to specific components.
* update "Slow Queries" panel to show percentage of the slow queries to the total number of read queries
served by vmselect. The percentage value should make it more clear for users whether there is a service degradation.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 463455665b)
The `path!="/favicon.ico"` filter has little sense, since there are many other special paths,
which may be filtered out - /metrics, /flags, /health, /ping, /robots.txt, /-/healthy, /-/ready, /reload, etc.
See /lib/httpserver/httpserver.go for more details.
It will be hard or impossible to maintain filters for all these paths, so it is better to drop this filter
in order to simplify queries and improve the consistency of these queries.
`version` label won't show the difference if various flavors of the same
version were deployed. But `short_version` will.
For example, on the sandbox env we test VM builds before new version release.
Without this change, the version update won't be visible on dashboard.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit d389a4fcf3)
Fix vminsert/vmstorage/vmselect metrics filtering when dashboard is used
to display data from many sub-clusters with unique job names.
Before, only one specific job could have been accounted for component-specific panels,
instead of all available jobs for the component.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Correctly calculate `Bytes per point` value for single-server and cluster VM dashboards.
Before, the calculation mistakenly accounted for the number of entries in indexdb in
denominator, which could have shown lower values than expected.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Using `job=~$job_storage` forces "Cache usage" panel to display only vmstorage caches, but there is a cache peresent at vmselect(`promql/rollupResult`).
Updated selector to match generic `$job` so that all caches will be displayed with an option to display per-job caches.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* dashboards/cluser: use `quantile` since `median` isn't supported by PromQL
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/*: add `restarts` annotation to show when there were restarts
The cluster's annotation query is aggregated `by job`,
while vmagent/vmalert are aggregated `by job, instance`.
This is because cluster dashboard can contains too many instances
and annotation could become too noisy.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/*: support instance filter in Version annotation
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
`avg` can be affected by just one outlier, which may lead
to false conclusions. `median` is supposed to reflect
reality better by leveling outliers out.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously the -maxConcurrentInserts was limiting the number of established client connections,
which write data to VictoriaMetrics. Some of these connections could be idle.
Such connections do not consume big amounts of CPU and RAM, so there is a little sense in limiting
the number of such connections. So now the -maxConcurrentInserts command-line option
limits the number of concurrently executed insert requests, not including idle connections.
It is recommended removing -maxConcurrentInserts command-line option, since the default value
for this option should work good for most cases.
Got "Failed to upgrade legacy queries Datasource $ds was not found" in
Grafana on operator dashboard.
It's datasource variable was incorrectly named `datasource`.
Also made the rest of the dashboards have homogeneous datasource-variable
names and selections, matching vmagent dashboard.
Previously, $job_select, $job_storage and $job_insert
didn't respect the $job filter. This change updates
the variable queries to account for set $job variable.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The new annotation is hidden by default and suppose to show
component `short_version` label change on the panels.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The new panels have been added to the vmstorage and drilldown rows.
`Disk space usage %` is supposed to show disk space usage percentage.
This panel is now also referred by `DiskRunsOutOfSpace` alerting rule.
This panel has Drilldown option to show absolute values.
`Disk space usage % by type` shows the relation between datapoints
and indexdb size. It supposed to help identify cases when indexdb
starts to take too much disk space.
This panel has Drilldown option to show absolute values.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Fixes a missing `&` char in data link for ETA panel
on cluster dashboards. Without `&` char it generates
wrong link when click on Drilldown menu.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The change list is the following:
* bump Grafana version to 9.2.6;
* remove artifacts in data links.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* some unexpected DS UIDs were removed;
* replace `$instance.*` filter with `$instance` since we respect
the instance port anyway;
* remove predefined datasource for `clusterbytenant`
in favour of datasource variable `ds`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The purpose of the update is to make the dash more usable
for large installations with many instances. Panels which showed
metrics per-instance (Mem, CPU) now are showing metrics per-job or min/max/avg
aggregations in % instead. This supposed to help immediately to identify
resource shortage and remain usable for small and big installations.
For cases when detailed info is needed, to the bottom of the dashboard
a new row `Drilldown` was added. Panels like Mem or CPU now contain
a `data-link` named `Drilldown` (cis shown on line click) which takes
user to more detailed panel.
The change list is the following:
* bump Grafana version to 9.1.0;
* replace old "Graph" panel with "TimeSeries" panel;
* improve Uptime panel to show number of instances per job;
* show % usage of Mem and CPU instead of absolute values;
* `Caches` row was removed. All needed info for caches is now part of `Troubleshooting`;
* add `Drilldown` section for detailed resource usage;
* add Annotations for Alert triggers. Not all alerts are supposed to be displayed
on the dashboard, but only those with label `show_at: dashboard`.
See `alerts-cluster.yml` change.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/cluster: few updates
* apply consistent formatting across panels;
* make resource usage panels per component more detailed;
* add extra panels to vmselect for displaying
`vm_rows_read_per_query`, `vm_rows_scanned_per_query`,
`vm_rows_read_per_series` and `vm_series_read_per_query` metrics.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/single: few updates
* apply consistent formatting across panels;
* add extra panels to Performance for displaying
`vm_rows_read_per_query`, `vm_rows_scanned_per_query`,
`vm_rows_read_per_series` and `vm_series_read_per_query` metrics.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmagent: few updates
* apply consistent formatting across panels;
* add panels for showing number of samples ingested
or scraped;
* adapt resource usage panels for multiple selected jobs/instances;
* add adhoc variable;
* display vmagent's version in Stats.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmalert: few updates
* apply consistent formatting across panels;
* adapt resource usage panels for multiple selected jobs/instances;
* show vmalert version in Stats section.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
