Previously the -maxConcurrentInserts was limiting the number of established client connections,
which write data to VictoriaMetrics. Some of these connections could be idle.
Such connections do not consume big amounts of CPU and RAM, so there is a little sense in limiting
the number of such connections. So now the -maxConcurrentInserts command-line option
limits the number of concurrently executed insert requests, not including idle connections.
It is recommended removing -maxConcurrentInserts command-line option, since the default value
for this option should work good for most cases.
Alert `RequestErrorsToAPI` could be permanently triggered due to
mistakes in clients configuration. However, such requests are unlikely
to cause VM health state change. So there is no need in displaying
this alert because there will be no correlation caused by it.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The new panels have been added to the vmstorage and drilldown rows.
`Disk space usage %` is supposed to show disk space usage percentage.
This panel is now also referred by `DiskRunsOutOfSpace` alerting rule.
This panel has Drilldown option to show absolute values.
`Disk space usage % by type` shows the relation between datapoints
and indexdb size. It supposed to help identify cases when indexdb
starts to take too much disk space.
This panel has Drilldown option to show absolute values.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The change list is the following:
* bump Grafana version to 9.2.6;
* replace old "Graph" panel with "TimeSeries" panel;
* show % usage of Mem and CPU additionally to of absolute values;
* `Caches` row was removed. All needed info for caches is now part of `Troubleshooting`;
* add Annotations for Alert triggers. Not all alerts are supposed to be displayed
on the dashboard, but only those with label `show_at: dashboard`.
See `alerts.yml` change.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The purpose of the update is to make the dash more usable
for large installations with many instances. Panels which showed
metrics per-instance (Mem, CPU) now are showing metrics per-job or min/max/avg
aggregations in % instead. This supposed to help immediately to identify
resource shortage and remain usable for small and big installations.
For cases when detailed info is needed, to the bottom of the dashboard
a new row `Drilldown` was added. Panels like Mem or CPU now contain
a `data-link` named `Drilldown` (cis shown on line click) which takes
user to more detailed panel.
The change list is the following:
* bump Grafana version to 9.1.0;
* replace old "Graph" panel with "TimeSeries" panel;
* improve Uptime panel to show number of instances per job;
* show % usage of Mem and CPU instead of absolute values;
* `Caches` row was removed. All needed info for caches is now part of `Troubleshooting`;
* add `Drilldown` section for detailed resource usage;
* add Annotations for Alert triggers. Not all alerts are supposed to be displayed
on the dashboard, but only those with label `show_at: dashboard`.
See `alerts-cluster.yml` change.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The default list of alerting rules contains the basic
rules for checking vmalert's health state and is recommended
to use for monitoring vmalert deployments.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* deployment/docker/docker-compose-cluster.yml: bump VictoriaMetrics Cluster components to the latest v1.83.0 version
* deployment/docker/docker-compose.yml: bump VictoriaMetrics Single node and vmutils to the latest v1.83.0 version
Previously the `quotesEscape` function was escaping only double quotes.
This wasn't enough, since the input string could contain other special chars,
which must be escaped when put inside JSON string. For example, carriage return and line feed chars (\n\r),
backslash char, etc. This led to the following issues, which were improperly fixed:
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/890 - this issue
was "fixed" by introducing the `crlfEscape` function, which led to unnecessary
complications in user templates, while not fixing various corner cases
such as backslash chars in the input string.
See 1de15ad490
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3139 - this issue
was "fixed" by urlencoding the whole string passed to -external.alert.source
command-line flag. This led to invalid urls, which couldn't be parsed by Grafana.
See 00c838353d
and 4bd0244599
This commit properly encodes the input string passed to `quotesEscape`, so it can be safely embedded inside JSON strings.
This commit deprecates crlfEscape template function and adds the following new template functions:
- strvalue and stripDomain - these functions are supported by Prometheus, so they were added
for compatibility purposes.
- jsonEscape and htmlEscape for converting the input string to valid quoted JSON string
and for html-escaping the input string, so it could be safely embedded as a plaintext
into html.
This commit also documents all supported template functions at https://docs.victoriametrics.com/vmalert.html#template-functions
The deprecated crlfEscape function isn't documented on purpose, since its usefulness is negative in general case.
Cluster components always have `-cluster` suffix. The change fixes
incorrect image tag in docker-compose manifest.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* deployment/docker/docker-compose.yml: adds version tags for VictoriaMetrics containers
* deployment/docker/docker-compose-cluster.yml: adds version tags for VictoriaMetrics containers
* deployment/docker: move cluster compose env to master branch
The change supposed to simplify the process of maintaining for
single/cluster docker-compose envs, alerts, dashboards. It also
supposes to reduce confusion for users when looking for cluster
related alerts/configs.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* deployment/docker: move cluster compose env to master branch
Review updates.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The `-mod=vendor` is automatically set when there is a `vendor` directory
starting from Go1.14 - see https://go.dev/doc/go1.14#go-command
Since the minimum supported Go version for VictoriaMetrics is Go1.17,
then the `-mod=vendor` option is no longer needed.
* deployment/docker/Makefile: added docker-scan
docker-scan based on native 'docker scan' function that use snyk.io, see https://docs.docker.com/engine/scan/
* set to call 'docker-scan after release binaries but before publishing
The new metric `vmagent_remotewrite_queues` exports a static value of
number of configured remote write queus. This metric is useful to
calculate total saturation per each configured URL with given number
of queues. See corresponding changes to vmagent alerts and dashboard.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
alerts: filter out non error log messages for `TooManyLogs`
Info and Warn error levels aren't always a result of malfunctioning
or faulty state. So we filter them out.
* added missed runbook for udpating k8s VM Cluster in DO
* Update deployment/marketplace/digitialocean/one-click-droplet/RELEASE_GUIDE.md
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Lowering threshold from 50% to 5% will be more sufficient
for discovering un-healthy system state. It also goes in
sync with alert definition in cluster branch.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: plot cpu limits for vmagent, vmalert and vm-single dashboards
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* alerts: add `TooHighCPUUsage` alert for all VM components
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: bump components version requirements
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* adds CGO build for arm64
it must improve performance for arm64 based deployments of vmstorage and
vmsingle for 15-20%
it depends on gozstd package update for correct musl gozstd vendoring
* typo fixes
* docs/CHANGELOG.md: document the change
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* dashboards/vmagent: shuffle panels for better visibility
More important error/dropped panels were moved higher on the main row.
Network usage panel moved to Resource usage row.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmagent: add Troubleshooting row to show top 5 instances/jobs by churn rate
New panels are supposed to show top 5 jobs or targets which generate the most
of the churn rate. They were placed into a new row "Troubleshooting".
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmagent: add panels for showing persistent queue saturation
New panels were added to Torubleshooting row to show the persistent queue
saturation. The corresponding alerts were added and linked to these
panels as well.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmagent: add alert "RejectedRemoteWriteDataBlocksAreDropped"
New alert suppose to send a notification when vmagent starts to drop
data blocks rejected by configured remote write destiantion.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dasbhoard: replace `null` datasources
null datasource value may confuse Grafana and make it drop panel query in some
versions.
* docker: bump grafana image version
* dashboards: add URL variable selector to vmagent dashboard
* dashboards: add new panel `Remote write connection saturation` to vmagent dashboard
* alerts: add new alert for `Remote write connection saturation` panel of vmagent dashboard
* dashboards: add "Logging rate" panel to vmagent dashboard
* vmalert: remove `vmalert_execution_duration_seconds` metric
The summary for `vmalert_execution_duration_seconds` metric gives no additional
value comparing to `vmalert_iteration_duration_seconds` metric.
* vmalert: update config reload success metric properly
Previously, if there was unsuccessfull attempt to reload config and then
rollback to previous version - the metric remained set to 0.
* vmalert: add Grafana dashboard to overview application metrics
* docker: include vmalert target into list for scraping
* vmalert: extend notifier metrics with addr label
The change adds an `addr` label to metrics for alerts_sent and alerts_send_errors
to identify which exact address is having issues.
The according change was made to vmalert dashboard.
* vmalert: update documentation and docker environment for vmalert's dashboard
Mention Grafana's dashboard in vmalert's README in a new section #Monitoring.
Update docker-compose env to automatically add vmalert's dashboard.
Update docker-compose README with additional info about services.
Alert `TooHighChurnRate24h` suppose to cover cases when churn rate
is low but results in multiple times higher number than total
number of active series.
The archive contains the following executables for Windows:
* vmagent
* vmalert
* vmauth
* vmctl
Other components - vmbackup, vmrestore, victoria-metrics - aren't supported for Windows yet
* dashboard: update single node dashboard
* add panel `Open FDs` for file descriptors metrics;
* add panel `Disk writes/reads` to show the real read/write
load on storage layer;
* add `process_resident_memory_bytes` metric to memory usage panel;
* add stats panel to show available CPUs, memory and disk space;
* rm flags panel since it didn't prove its usefulness.
* alerts: add alert for reaching FDs limit
List contains examples for the alerting rules which might be executed
via `vmalert` to track the health state of VM components. It is assumed
that list will be revised and calibrated for each system individually.
Currently, alertmanager spams logs with `Notify attempt failed, will retry later` message
because default receiver is unreachable. The change updates default configuration with
blackhole receiver which means alertmanager will continue to accept alerts but won't make
attempts to send them anywhere.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/995
`vmagent` Grafana dashboard suppose to provide basic observability over multiple
`vmagent` instances. Dashboard is saved in Grafana export format so it can be easily
imported. It was also integrated into docker-compose environment.
vmagent replaces Prometheus to perform scrapes and writes
into VictoriaMetrics installation. Prometheus datasource was
dropped, but its config was reused to feed vmagent.
Change also contains simplification in dashboard propagation
to Grafana container by removing excessive json manipulation
steps.
If docker app is upgraded from root to non-root, then the data pointed by `-storageDataPath` or similar flags
becomes denied to non-root user after the upgrade. This breaks upgrade path. So revert back to default root user
for docker apps.
Users may explicitly execute `docker run --user <non_root_user>` for running docker apps under non-root user.
Add sigint as stopsignal to docker file. You can find more here: https://docs.docker.com/engine/reference/builder/#usage
With this change, the main process inside the container will receive SIGINT, and after a grace period, SIGKILL.
