* lib/querytracer: makes package concurrent safe to use
it must fix various issues with concurrent code usage.
Especially, when it's not reasonable to wait for all goroutines to be finished
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vmstorage: close vminsert connections gradually before stopping storage
Implements graceful shutdown approach suggested here - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4922#issuecomment-1768146878
Test results for this can be found here - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4922#issuecomment-1790640274
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmstorage: update graceful shutdown logic
- close connections from vminsert in determenistic order
- update flag description
- lower default timeout to 25 seconds. 25 seconds value was chosen because the lowest default value used in default configuration deployments is 30s(default value in Kubernetes and ansible-playbooks).
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/cluster: add information about re-routing enhancement during restart
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/changelog: add entry for new command-line flag
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* {app/vmstorage,lib/ingestserver}: address review feedback
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/cluster: add note to update workload scheduler timeout
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* wip
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This case is possible after the following steps:
1. vmagent tries to perform handshake with the -remoteWrite.url in order to determine whether
the remote storage supports zstd-compressed data.
2. The remote storage is unavailable during the handshake. In this case vmagent falls back to Snappy compression
for the data sent to the remote storage.
3. vmagent compresses the collected data into blocks with Snappy and puts these blocks to persistent queue on disk.
4. The remote storage becomes available.
5. vmagent restarts, performs the handshake with the remote storage and detects that it supports zstd-compressed data.
6. vmagent starts sending Snappy-compressed data from persistent queue to the remote storage,
while falsely advertizing it sends zstd-compressed data.
7. The remote storage receives Snappy-compressed data and fails unpacking it with zstd.
The solution is to just fall back to Snappy decompression if zstd decompression fails.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5301
Previously the `Host` header was remained unchanged when passing it in requests to backends.
This may improperly work if the backend uses host-based routing.
While at it, allows http/2.0 requests to backends. While VictoriaMetrics components
do not accept http/2.0 requests, other backends can require such requests.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5240
- Re-use identically configured http.Transport across multiple users.
This fixes handling of the limit on the number of connection, which can be established per each backend
via -maxIdleConnsPerBackend command-line flag. This limit stopped working after 323f3720ed
- Add docs about backend TLS setup at https://docs.victoriametrics.com/vmauth.html#backend-tls-setup
- Add ability to disable backend TLS verification for all the users via -backend.tlsInsecureSkipVerify command-line flag.
This flag may be useful when -auth.config contains big number of users, and every user must disable backend TLS verification.
- Add ability to specify TLS Root CA via tls_ca_file option at per-user basis and via -backend.tlsCAFile command-line flag
across all the users.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5240
Previously entries which were accessed only 1 time weren't cached.
It has been appeared that some rarely executed heavy queries may read indexdb block twice
in a row instead of once. There is no need in caching such a block then.
This change should eliminate cache size spikes for indexdb/dataBlocks when such heavy queries are executed.
Expose -blockcache.missesBeforeCaching command-line flag, which can be used for fine-tuning
the number of cache misses needed before storing the block in the caching.
* app/vmalert: update remote-write process
* automatically retry remote-write requests on closed connections. The change should reduce the amount of logs produced in environments with short-living connections or environments without support of keep-alive on network balancers.
* increment `vmalert_remotewrite_errors_total` metric if all retries to send remote-write request failed. Before, this metric was incremented only if remote-write client's buffer is overloaded.
* increment `vmalert_remotewrite_dropped_rows_total` amd `vmalert_remotewrite_dropped_bytes_total` metrics if remote-write client's buffer is overloaded. Before, these metrics were incremented only after unsuccessful HTTP calls.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update docs/CHANGELOG.md
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Hui Wang <haley@victoriametrics.com>
Add `tls_insecure_skip_verify` option on per-user basis which allows to disable TLS verification for all requests to backend on behalf of this user.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5240
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit 323f3720ed)
reduce the number of queries for restoring alerts state on start-up.
The change should speed up the restore process and reduce pressure on `remoteRead.url`.
(cherry picked from commit 90d45574bf)
* vmauth: add browser authorization request for http requests without credentials to a route that is not in the `unauthorized_user` section (when `unauthorized_user` is specified).
* add link to issue in CHANGELOG
* Extend vmauth docs
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Repeated instant queries with long lookbehind windows, which contain one of the following rollup functions,
are optimized via partial result caching:
- sum_over_time()
- count_over_time()
- avg_over_time()
- increase()
- rate()
The basic idea of optimization is to calculate
rf(m[d] @ t)
as
rf(m[offset] @ t) + rf(m[d] @ (t-offset)) - rf(m[offset] @ (t-d))
where rf(m[d] @ (t-offset)) is cached query result, which was calculated previously
The offset may be in the range of up to 1 hour.
The SECURITY label should be applied only to changes, which fix security issues.
The change at ad839aa492 adds new command-line flags, which can be used
for improving security in some cases. They do not fix any security issues.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5111
The new metric gets increased each time `-search.logQueryMemoryUsage` memory limit
is exceeded by a query. This metric should help to identify expensive and heavy queries
without inspecting the logs.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The new panel supposed to indicate alerting groups that miss their evaluations.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit aaf9e3d526)
The new rule for vmalert supposed to detect groups that miss their
evaulations due to slow queries.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 9866974a53)
The panel `Errors rate to Alertmanager` had `group` label filter
applied to the expression, while the metric `vmalert_alerts_send_errors_total`
doesn't have that label. This resulted into always empty results.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 8874b525b7)
fix possible missing firing states for alerting rules in replay mode
Before if one firing stage is bigger than single query request range, like rule with a big `for`, alerting rule won't able to be detected as firing.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit abcb21aa5e)
support `Strict-Transport-Security`, `Content-Security-Policy` and `X-Frame-Options`
HTTP headers in all VictoriaMetrics components.
The values for headers can be specified by users via the following flags:
`-http.header.hsts`, `-http.header.csp` and `-http.header.frameOptions`.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit ad839aa492)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously url watchers for pod, service and node objects could be mistakenly closed
when service discovery was set up only for endpoints and endpointslice roles,
since watchers for these roles may start start pod, service and node url watchers
with nil apiWatcher passed to groupWatcher.startWatchersForRole().
Now all the url watchers, which belong to a particular groupWatcher, are stopped at once
when this groupWatcher has no apiWatcher subscribers.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5216
The issue has been introduced in v1.93.5 when addressing https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4850
* do not print redundant error logs when failed to scrape consul or nomad target
prometheus performs the same because it uses consul lib which just drops the error(1806bcb38c/api/api.go (L1134))
- Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup
don't prevent from processing the corresponding scrape targets after the file becomes correct,
without the need to restart vmagent.
Previously scrape targets with invalid TLS CA file or TLS client certificate files
were permanently dropped after the first attempt to initialize them, and they didn't
appear until the next vmagent reload or the next change in other places of the loaded scrape configs.
- Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent.
Previously the old TLS CA was used until vmagent restart.
- Properly handle errors during http request creation for the second attempt to send data to remote system
at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing,
since the returned request is nil on error.
- Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent.
Previously it could miss details on the source of the request.
- Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header
of every http request issued by vmagent during service discovery or target scraping.
Re-use the HTTP client instead until the corresponding scrape config changes.
- Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached,
e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server
when auth header cannot be obtained because of temporary error.
- Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config.
Cache the loaded certificate and the error for one second. This should significantly reduce CPU load
when scraping big number of targets with the same tls_config.
- Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`.
- Improve test coverage at lib/promauth
- Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later.
Previously vmagent was exitting in this case.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
* app/vmselect: limit the number of parallel workers by 32
The change should improve performance and memory usage during query processing
on machines with big number of CPU cores. The number of parallel workers for
query processing is controlled via `-search.maxWorkersPerQuery` command-line flag.
By default, the number of workers is limited by the number of available CPU cores,
but not more than 32. The limit can be increased via `-search.maxWorkersPerQuery`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
- The `-search.maxWorkersPerQuery` command-line flag doesn't limit resource usage,
so move it from the `resource usage limits` to `troubleshooting` chapter at docs/Single-server-VictoriaMetrics.md
- Make more clear the description for the `-search.maxWorkersPerQuery` command-line flag
- Add the description of `-search.maxWorkersPerQuery` to docs/Cluster-VictoriaMetrics.md
- Limit the maximum value, which can be passed to `-search.maxWorkersPerQuery`, to GOMAXPROCS,
because bigger values may worsen query performance and increase CPU usage
- Improve the the description of the change at docs/CHANGELOG.md. Mark it as FEATURE instead of BUGFIX,
since it is closer to a feature than to a bugfix.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5087
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
