* add support for reading remote auth_config file via http
* fix lint
* fix defer on close body
Co-authored-by: Tiago Magalhães <tmagalhaes@wavecom.pt>
* vmalert: introduce additional HTTP URL params per-group configuration
The new group field `params` allows to configure custom HTTP URL params
per each group. These params will be applied to every request before
executing rule's expression. Hot config reload is also supported.
Field `extra_filter_labels` was deprecated in favour of `params` field.
vmalert will print deprecation log message if config file contains
the deprecated field.
`params` fields are supported by both Prometheus and Graphite datasource types.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: provide more examples for `params` field
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: set higher priority for `params` setting
If there would be a conflict between URL params set in `datasource.url` flag
and params in group definition the latter will have higher priority.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The bump was required for `vmalert` package.
`vmalert` docs now also contain an updated description.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The vm_cache_size_max_bytes metric can be used for determining caches which reach their capacity via the following query:
vm_cache_size_bytes / vm_cache_size_max_bytes > 0.9
Previously, vmalert would print an err message and set vmalert_config_last_reload_successful=0
only once during a hot reload of a bad config. Such behaviour may result into non noticed
event of a bad config reload attempt
Now, it continues to print error messages and keep vmalert_config_last_reload_successful state
until successful attempt will be made or config state will be rolled back to prev state.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
For a long time notifier.Addr flag was required. The assumption was that vmalert will
be always used for alerting. However, practice shows that some users need only
recording rules. In this case, requirement of notifier.Addr is ambigious.
The change verifies if loaded config contains recording or alerting rules and
if there are corresponding flags set. This is true for initial config load
and hot reload.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* fix: handle an error in a table with subqueries
* feat: store display type in URL
* Revert "feat: store display type in URL"
This reverts commit ccc242c69a.
* Simplify queries to OpenTSDB (and make them properly appear in OpenTSDB query stats) and also tweak defaults a bit
Signed-off-by: John Seekins <jseekins@datto.com>
* remove extraneous printlns
Signed-off-by: John Seekins <jseekins@datto.com>
* remove empty line
Signed-off-by: John Seekins <jseekins@datto.com>
* fix bug in offset calcuation and closer to working with simpler queries
Signed-off-by: John Seekins <jseekins@datto.com>
* fix boolean eval
Signed-off-by: John Seekins <jseekins@datto.com>
* fix casting and check for multiple series
Signed-off-by: John Seekins <jseekins@datto.com>
* feat: add query history
* fix: change detect keyUp for nav query history
* feat: set default query history
* feat: change graph legend
* update dependencies
* update codemirror version
* fix: correct update period time after zoom/pan
* fix: optimize data processing for the graph
* fix: eliminate memory leaks related to mouse events
* fix: correct display of straight line
* Merge branch 'master' into vmui-fix-reset-graph
* app/vmselect: `make vmui-update`
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This removes the unneeded level of indirection and improves code readability.
The "prometheus" and "graphite" constants aren't going to change in the future, so there is no sense in hiding them behind constants.
This should improve the maximum data ingestion speed for highly-loaded vmagent instances
which run on beefy servers with many CPU cores and big amounts of RAM
Previously only the lower part of 64-bit hash was used for calculating the offset.
This may give uneven distribution in some cases. So let's use all the available 64 bits from the hash
for calculating the offset.
Prometheus allows to have groups with no rules, so we should support
it in vmalert as well for compatibility reasons.
It is also allowed to hot-reload empty groups by adding or removing rules.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Do not store in memory the response from the last scrape per each target if -promscrape.noStaleMarkers option is enabled.
This should reduce memory usage when the scraped targets return large responses.
Previously, ID for alert entity was generated without alertname or groupname.
This led to collision, when multiple alerting rules within the same group
producing same labelsets. E.g. expr: `sum(metric1) by (job) > 0` and
expr: `sum(metric2) by (job) > 0` could result into same labelset `job: "job"`.
The issue affects only UI and Web API parts of vmalert, because alert ID is used
only for displaying and finding active alerts. It does not affect state restore
procedure, since this label was added right before pushing to remote storage.
The change now adds all extra labels right after receiving response from the datasource.
And removes adding extra labels before pushing to remote storage.
Additionally, change introduces a new flag `Restored` which will be displayed in UI
for alerts which have been restored from remote storage on restart.
* feat: add query history
* fix: change detect keyUp for nav query history
* feat: set default query history
* app/vmselect/vmui: `make vmui-update`
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Commit fixes potential race condition when group update
and generating of ID() happens simultaneously.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Regression was introduced during code refactoring. It potentially
could lead to situation when SIGHUP signals were ignored while
vmalert was still busy with initing group manager.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The extra `/` may cause issues when additional path prefixes
are configured. Also, removing it makes it consistent
with the rest of declarations.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
vmctl: properly convert influx bools into integer representation
When using vmctl influx, the import would fail importing boolean fields
with:
```
failed to convert value "some".0 to float64: unexpected value type true
```
This converts `true` to `1` and `false` to `0`.
Fixes#1709
Sort series by a hash calculated from the series labels. This should guarantee "random" selection of the returned time series.
Previously the selection could be biased, since time series were sorted alphabetically by label names and label values.
This allows sending staleness marks and properly calculate scrape_series_added metric in stream parsing mode
at the cost of the increased memory usage, since now the potentially big response is kept
in the lastScrape byte slice per each scrapeWork.
In practice the memory usage increase shouldn't be big, since the response size
is usually much smaller than the parsed metrics from this response after the relabeling,
which usually adds a big pile of target-specific labels per each metric.
* vmalert: adjust `http.Transport.MaxIdleConns` value accordingly to `http.Transport.MaxIdleConnsPerHost`
`http.Transport.MaxIdleConnsPerHost` setting is controlled by `datasource.maxIdleConnections` flag,
while `http.Transport.MaxIdleConns` is inherited from DefaultTransport and is equal to `100`.
The fix adjusts `http.Transport.MaxIdleConns` value if it is lower than `http.Transport.MaxIdleConnsPerHost`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmauth: adjust `http.Transport.MaxIdleConns` value accordingly to `http.Transport.MaxIdleConnsPerHost`
`http.Transport.MaxIdleConnsPerHost` setting is controlled by `maxIdleConnsPerBackend` flag,
while `http.Transport.MaxIdleConns` is inherited from DefaultTransport and is equal to `100`.
The fix adjusts `http.Transport.MaxIdleConns` value if it is lower than `http.Transport.MaxIdleConnsPerHost`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The source link is controlled by `external.url` and `external.alert.source`
flags, in the same way as for alertmanager notifications.
The source link is added to Alerts list view, and specific Alert view.
* adds read-only mode for vmstorage
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/269
* changes order a bit
* moves isFreeDiskLimitReached var to storage struct
renames functions to be consistent
change protoparser api - with optional storage limit check for given openned storage
* renames freeSpaceLimit to ReadOnly
The list of functions, which can adjust lookbehind window is more limited than the rest of functions,
so it is better from maintainability and readability PoV using the allowlist instead of blocklist.
It is expected that the `deriv(m[d])` returns non-empty value if the lookbehind window `d`
contains less than 2 samples in the same way as `rate()` does.
This is a follow-up after 3e084be06b .
Previously, `predict_linear` returned slightly different results comparing
to Prometheus. The change makes linear regression algorithm compatible
with Prometheus.
`deriv` was excluded from the list of functions which can adjust the time
window for the same reasons.
The fix makes the binary comparison func to check for NaNs
before executing the actual comparison. This prevents VM
to return values for non-existing samples for expressions
which contain bool comparisons. Please see added test
for example.
It appeared, that `testRowsEqual` NaN comparison was incorrect.
The fix caused some tests to fail. Please see the change and
tests updated.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Adjustment results into discrepancy between Prometheus and VM on time windows
smaller than scrape interval.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The fix will always return zero if received set of items consists of one
element only, which also means no deviation.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The change affects `count/stddev/stdvar_over_time` funcs and makes
them to return NaN instead of zero when there is no datapoints
in a time window.
This is needed for improving compatibility with Prometheus.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The removed fast path optimisations weren't consistent with
`quantile` function behavior and results into discrepancy.
Specifically, results didn't match in cases when:
* 0 < phi > 1;
* values contain only one element.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmselect: `quantile` func compatiblity with Prometheus
The `quantile` func was previously calculated by https://github.com/valyala/histogram
package. The result of such calculation was always the closest real value to
requested quantile. While in Prometheus implementation interpolation is used.
Such difference may result into discrepancy in output between Prometheus and
VictoriaMetrics.
This commit adds a Prometheus-like `quantile` function. It also used by other
functions which depend on it, such as `quantiles`, `quantile_over_time`, `median` etc.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1625
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmselect: `quantile` review fixes
* quantile functions were split into multiple to provide
different API for already sorted data;
* float64sPool is used for reducing allocations. Items in pool may have
different sizes, but defining a new pool was complicates due to name collisions;
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmselect: make sorting for query result similar to Prometheus
Updated sorting allows to get the order of series in result similar or equal
to what Prometheus returns.
The change is needed for compatibility reasons.
* Update app/vmselect/promql/exec_test.go
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
`omitempty` tag resulted into skipping this param on marshaling,
which was used as a checksum for groups configuration. Since on
config reload checksums are compared before applying changes,
any change to `interval` only didn't trigger config reload.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1641
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The commit contains the following changes:
- Show vmui when requesting /graph page in order to be compatible with Prometheus datasource in Grafana.
- Properly encode query args at vmui url.
- Set the number of points on the graph to the number of horizontal pixels divided by 2. Previously it was hardcoded to 30.
- Do not save server url to persistent storage at browser, since it should be always obtained from the url.
- Run `make vmui-update` for updating vmui embedded into VictoriaMetrics.
* feat: change url params for compatible prometheus
* style: add comment for TimeParams
* fix: change get default server for single version
* fix: change function for get query string value
* vmalert: add flag to limit the max value for auto-resovle duration for alerts
The new flag `rule.maxResolveDuration` suppose to limit max value for
alert.End param, which is used by notifiers like Alertmanager for alerts auto resolve.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1586
These actions simlify metrics filtering. For example,
- action: keep_metrics
regex: 'foo|bar|baz'
would leave only metrics with `foo`, `bar` and `baz` names, while the rest of metrics will be deleted.
The commit also makes possible to split long regexps into multiple lines. For example, the following config is equivalent to the config above:
- action: keep_metrics
regex:
- foo
- bar
- baz
New UI pages:
/ - welcome page with API handlers list;
/groups - list of all rules per group;
/alerts - list of all active alerts;
/groupID/alertID/status - status of the active alert;
The number of series per target can be limited with the following options:
* Global limit with `-promscrape.maxSeriesPerTarget` command-line option.
* Per-target limit with `max_series: N` option in `scrape_config` section.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1561
The purpose of update is to make README and flags description more
clear to the reader. Especially, show that vm-account-id flag is required
for clustered version of VM.
* vmalert: allow extra GET params in datasource package
ExtraParams will be added as GET params to every HTTP request made by datasource.
The `roundDigits` param, for example, was substituted by corresponding extra param.
* vmalert: add nocache=1 param for replay process
The `nocache=1` param is VictoriaMetrics specific parameter which prevents it
from caching and boundaries aligning for queries. We set it to avoid cache
pollution in `replay` mode and also to avoid unnecessary time range boundaries
alignment.
* vmalert: mention nocache=1 in replay description
* vmalert: fix bug with unused param
* vmalert: remove `vmalert_execution_duration_seconds` metric
The summary for `vmalert_execution_duration_seconds` metric gives no additional
value comparing to `vmalert_iteration_duration_seconds` metric.
* vmalert: update config reload success metric properly
Previously, if there was unsuccessfull attempt to reload config and then
rollback to previous version - the metric remained set to 0.
* vmalert: add Grafana dashboard to overview application metrics
* docker: include vmalert target into list for scraping
* vmalert: extend notifier metrics with addr label
The change adds an `addr` label to metrics for alerts_sent and alerts_send_errors
to identify which exact address is having issues.
The according change was made to vmalert dashboard.
* vmalert: update documentation and docker environment for vmalert's dashboard
Mention Grafana's dashboard in vmalert's README in a new section #Monitoring.
Update docker-compose env to automatically add vmalert's dashboard.
Update docker-compose README with additional info about services.
Before, metric `vm_request_duration_seconds` was update only on successful
attempts which could be misleading. For example, timeout errors on netstorage
request may be not accounted in the metric and won't be visible on dashboards.
Using `defer` statement to update the metric after query arguments validation
may improve the situation.
This option allows reducing CPU usage a bit when VictoriaMetrics is used
for collecting and processing non-Prometheus data. For example, InfluxDB line protocol, Graphite, OpenTSDB, CSV, etc.
This option can be useful when vmagent consumes too much additional memory
for staleness markers functionality and when staleness markers aren't needed.
* vmalert: allow to disable automatically added path to remote write address via disablePathAppend flag
* docs: update docs to include remoteWrite.disablePathAppend
This metric can be used for determining high saturation of every connection to remote storage with
an alerting query `rate(vmagent_remotewrite_send_duration_seconds_total) > 0.9s`.
This query triggers when a connection is satureated by more than 90%
This reverts commit 94dfcb6747a3b29a11d14e71bea21a2312bb6346.
It is better to remove staleness marks (decimal.StaleNaN) before calling rollupConfig.Do, e.g. in preFunc
Prometheus stalenss marks shouldn't be changed in removeCounterResets. Otherwise they will be converted to an ordinary NaN values,
which couldn't be removed in dropStaleNaNs() function later. This may result in incorrect calculations for rollup functions.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1526
* vmalert: expose new metrics for tracking number of produced samples during last evaluation
Two new metrics were added to track the number of samples produced during the last evaluation:
* vmalert_recording_rules_last_evaluation_samples
* vmalert_alerting_rules_last_evaluation_samples
The gauge type is used to remain consistent with Prometheus metric
`prometheus_rule_group_last_evaluation_samples` which is on the group level.
However, the counter type was considered as well.
Two metrics instead of one are used to make it easier to separate recording and
alerting rules. It is likely, number of samples produced by recording rules is
more important so people will refer to it more frequently.
The expected usage of the new metric is the following:
```
- alert: RecordingRuleReturnsEmptyResults
expr: sum(vmalert_recording_rules_last_evaluation_samples) by(recording) < 1
annotations:
summary: Recording rule {{$labels.recording}} returns empty results.
Please verify expression correctness.
```
Addresses https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1494
* vmalert: rename `vmalert_alerts_error` to `vmalert_alerting_rules_error` to remain consistent with recording rules metrics
* feature: Add multitenant for vmagent
* Minor fix
* Fix rcs index out of range
* Minor fix
* Fix multi Init
* Fix multi Init
* Fix multi Init
* Add default multi
* Adjust naming
* Add TenantInserted metrics
* Add TenantInserted metrics
* fix: remove unused metrics for vmagent
* fix: remove unused metrics for vmagent
Co-authored-by: mghader <marc.ghader@ubisoft.com>
Co-authored-by: Sebastian YEPES <syepes@gmail.com>
* Rename -search.maxMetricsPointSearch to -search.maxSamplesPerQuery, so it is more consistent with the existing -search.maxSamplesPerSeries
* Move the -search.maxSamplesPerQuery from vmstorage to vmselect, so it could effectively limit the number of raw samples obtained from all the vmstorage nodes
* Document the -search.maxSamplesPerQuery in docs/CHANGELOG.md
* fix: move request button to server input
* feat: add switch for query autocomplete
* refactor: rename state for popover open
* feat: add detect os by userAgent
* fix: change hotkey to run query for mac
* fix: change detect mac os
* fix: change div to span inside Typography
Co-authored-by: yury <yurymolodov@victoriametrics.com>
This should improve the readability and usefullness of the /api/v1/status/top_queries when debugging slow queries
or queries that take too much cpu time.
- Support durations anywhere in MetricsQL queries. E.g. sum_over_time(m[1h])/1h is equivalent to sum_over_time(m[1h])/3600
- Support durations without suffix. E.g. rate(m[300]) is equivalent to rate(m[5m])
* Change default value of '-remoteWrite.queues' to cgroup.AvailableCPUS() * 2 to reduce scrape interval
Default value of vmagent option '-remotewrite.queues' is 4 and default
size of vmagent ScheudleUnmarshalWorkers is number of CPUs, when available
CPUs is much greater than 4, e.g 32, worker are competing push queues
which will increase scrape interval and may cause scrape timeout.
* Update README and flag description
Co-authored-by: xiaozy <xiaozy01@fenbi.com>
Due to staleness handling, increase_pure were using incorrect previous value
during calculation in cases where series disappears for period longer
than staleness period and then returns back. The fix suppose to account
for a real datapoint value before staleness takes place. The fix should
remove unexpected spikes while using `increase_pure` for staled series.
This panic can be raised by the reverseProxy on aborted request to the backend.
So handle it (e.g. suppress) at reverseProxy.ServeHTTP call.
Do not suppress the panic at lib/httpserver generic HTTP handler,
since it may result in an inconsistent state left after the panicking handler.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1353
* vmalert: fix mistake with object reuse while parsing response
During the refactoring, the wrong optimisations was applied in
parse function which caused metric fields reset. The change removes
optimisation.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1369
* vmalert: add test to cover multiple metrics in one response
* vmalert: support rules backfilling (aka `replay`)
vmalert can `replay` configured rules in the past
and backfill results via remote write protocol.
It supports MetricsQL/PromQL storage as data source,
and can backfill data to remote write compatible
storage.
Supports recording and alerting rules `replay`. See more
details in README.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/836
* vmalert: review fixes
* vmalert: readme fixes
* new feature: relabel logging
Use scrape_configs[x].relabel_debug = true to log metric names inkl.
labels before and after relabeling. After relabeling related metrics
get dropped, i.e. not submitted to servers.
* vminsert wants relabel logging, too.
New flag `-rule.configCheckInterval` defines how often `vmalert` will re-read
config file. If it detects any changes, the config will be reloaded.
This behaviour is turned off by default.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/512
The new setting `extra_filter_labels` may be assigned to group.
If it is, then all rules within a group will automatically filter
for configured labels. The feature is well-described here
https://docs.victoriametrics.com#prometheus-querying-api-enhancements
New setting is compatible only with VM datasource.
* changes vmalert query function
for prometheus rules compatibility its better to use labels as map.
it simplifies template evaluation and allow to ignore can't evaluate field error
because map will return default value.
fixes https://github.com/VictoriaMetrics/operator/issues/243
These numbers are exposed via the following metrics:
- vmagent_hourly_series_limit_current_series
- vmagent_daily_series_limit_current_series
Expose also the limits via the following metrics:
- vmagent_hourly_series_limit_max_series
- vmagent_daily_series_limit_max_series
The `::tag` type is needed in cases when field and tag names are equal, which
results into unexpected results in InfluxQL. Setting the type explicitly helps
InfluxDB to understand which exact column we apply filter to.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1299
duplicates map helps to determine wheter extra labels has overriden
labels which make time series unique. It was using a sorted hashed
labels sequence as a key. But hashing algorithm could have collisions,
so it is more convenient to not use hashing at all.
Log message for recording rules duplicates was improved as well.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1293
Starting from v1.56.0 VM supports `round_digits` which allows to limit
the number of digits after the decimal point in response value. The feature
can be used to reduce entropy of produced by recording rules values
and significantly improve the compression. See more details in link below.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/525
Previously, `startGroup` could exit on restore errors despite the
`remoteRead.ignoreRestoreErrors` flag value. Now vmalert checks the
flag value before deciding whether to return error or just log it.
Alerting rules now can return specific error type ErrStateRestore to indicate
whether restore state procedure failed. Such errors were returned and logged
before as well. But now user can specify whether to just log these errors
(remoteRead.ignoreRestoreErrors=true) or to stop the process
(remoteRead.ignoreRestoreErrors=false). The latter is important when VM isn't
ready yet to serve queries from vmalert and it needs to wait.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1252
* Simplify arguments list for fn `queryDataSource` to improve readbility
* vmalert: adjust `time` param according to rule evaluation interval
With this change, vmalert will start to use rule's evaluation interval
for truncating the `time` param. This is mostly needed to produce consistent
time series with timestamps unaffected by vmalert start time. Now, timestamp
becomes predictable.
Additionally, adjustment is similar to what Grafana does for plotting range graphs.
Hence, recording rule series and recording rule expression plotted in grafana
suppose to become similar in most of cases.
* changes vmalert Querier with per rule querier
it allows to changes some parametrs based on rule setting
for instance - alert type, tenant for cluster version or event endpoint url.
Previously, vmalert used `lastExecTime` timestamp when writing recording rules
to the remote storage. This may be incorrect, if vmalert uses `datasource.lookback` flag,
which means rule's expression will be executed at some moment in the past.
To avoid such situations, vmalert now will use returned timestamp instead of `lastExecTime`.
This should increase block sizes and subsequently increase the maximum possible bandwidth per each connection to remote storage.
This, in turn, should reduce the probability of storing the data in local buffers.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1235
* docs: drop table of contents for `vmctl`
We already have it autogenerated on .github.io, so no need to keep it.
* docs: mention OpenTSDB migration feature for vmctl
* docs: sync docs for `vmalert`
* add more documentation on OpenTSDB migration explaining what chunking means
* more clarification of OpenTSDB aggregations
* break out what a retention string becomes
* add more docs around retention strings
* add example of running program and fix mistake in how hard offsets are handled
* fix formatting
The major change is adding `sort` directive to docs. For those docs which are copied
from internal packages `sort` is added via makefile command. For the rest it is added
manually since they're updated manually as well.
The rest of changes is connected with markdown formatting. For example, changing headers
in some files (`##` => `#`) makes navigation on .github.io to look better. This especially
useful for `changelog` docs.
Table of contents for `vmctl` is dropped, since we already have it autogenerated on .github.io.
No link changes expected. The corresponding PR to `cluster` branch will be made in follow-up PR.