The TryParseTimestampRFC3339Nano() must properly parse RFC3339 timestamps with timezone offsets.
While at it, make tryParseTimestampISO8601 function private in order to prevent
from improper usage of this function from outside the lib/logstorage package.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6508
While there, remove the obsolete files from the previous version of
docs.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 87edfa61c1)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This reverts commit 5ecf439078.
Reason for revert: the previous logic was correct.
The purpose of `-search.maxSamplesPerQuery` command-line flag is to limit the amounts of CPU resources,
which could be taken by a single query - see https://docs.victoriametrics.com/#resource-usage-limits .
VictoriaMetrics processes samples in blocks during querying - it reads the block, then unpacks it,
then filters out samples outside the selected time range. This means that it _spends CPU time_
on reading and unpacking of _all the samples_ in every block on the requested time range,
even if only a single sample per each block matches the given time range.
The previous logic was effectively limiting CPU time a single query could take.
The new logic fails limiting CPU time a single query could take in some pathological cases
when only a small fraction of samples per each requested block fit the requested time range.
This allows performing multiplication DoS-attacks by querying very narrow time ranges over historical blocks,
which tend to be full. For example, if the `-search.maxSamplesPerQuery` equals to a billion,
and the query requests a single sample out of 8K samples per each block, this means that the query
may unpack a billion of such blocks without exceeding the limit, e.g. it may unpack and process 8K*1e9=8e12 samples.
This is not what the resource usage limits were created for originally - see https://docs.victoriametrics.com/#resource-usage-limits
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5851
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6464
This reverts commit 92b22581e6.
Reason for revert: too complex and slow approach for spellchecking task.
This approach may significantly slow down development pace. It also may take non-trivial
amounts of additional time and resources at CI/CD because of all this npm shit at cspell directory.
Note to @arkid15r : the idea with the ability to run spellchecker on all the VictoriaMetrics
codebase is great. But this shouldn't be mandatory pre-commit check. It is enough to have
a Makefile rule like `make spellcheck`, which could be run manually whenever spellcheck is needed
(e.g. once per month or once per quarter).
Reason for revert: this commit doesn't resolve real security issues,
while it complicates the resulting code in subtle ways (aka security circus).
Comparison of two strings (passwords, auth keys) takes a few nanoseconds.
This comparison is performed in non-trivial http handler, which takes thousands
of nanoseconds, and the request handler timing is non-deterministic because of Go runtime,
Go GC and other concurrently executed goroutines. The request handler timing is even
more non-deterministic when the application is executed in shared environments
such as Kubernetes, where many other applications may run on the same host and use
shared resources of this host (CPU, RAM bandwidth, network bandwidth).
Additionally, it is expected that the passwords and auth keys are passed via TLS-encrypted connections.
Establishing TLS connections takes additional non-trivial time (millions of nanoseconds),
which depends on many factors such as network latency, network congestion, etc.
This makes impossible to conduct timing attack on passwords and auth keys in VictoriaMetrics components.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6423/files
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6392
mention change for
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6457
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 1af13208c2)
### Describe Your Changes
With the recent release of Managed VictoriaMetrics users are able to
create and execute Alerting & Recording rules and send notifications via
hosted Alertmanager.
So, we're publishing Alertmanager configuration docs for Managed
VictoriaMetrics.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 1106d91741)
### Describe Your Changes
Trimming content which is loaded from an external pass leads to obscure
issues in case user-defined input contained trimmed chars. For example.
user-defined password "foo\n" will become "foo" while user will expect
it to contain a new line.
---
For example, a user defines a password which ends with `\n`. This often
happens when user Kubernetes secrets and manually encodes value as
base64-encoded string.
In this case vmauth configuration might look like:
```
users:
- url_prefix:
- http://vminsert:8480/insert/0/prometheus/api/v1/write
name: foo
username: foo
password: "foobar\n"
```
vmagent configuration for this setup will use the following flags:
```
-remoteWrite.url=http://vmauth:8427/
-remoteWrite.basicAuth.passwordFile=/tmp/vmagent-password
-remoteWrite.basicAuth.username="foo"
```
Where `/tmp/vmagent-password` is a file with `foobar\n` password.
Before this change such configuration will result in `401 Unauthorized`
response received by vmagent since after file content will become
`foobar`.
---
An example with Kubernetes operator which uses a secret to reference the
same password in multiple configurations.
<details>
<summary>See full manifests</summary>
`Secret`:
```
apiVersion: v1
data:
name: Zm9v # foo
password: Zm9vYmFy # foobar\n
username: Zm9v= # foo
kind: Secret
metadata:
name: vmuser
```
`VMUser`:
```
apiVersion: operator.victoriametrics.com/v1beta1
kind: VMUser
metadata:
name: vmagents
spec:
generatePassword: false
name: vmagents
targetRefs:
- crd:
kind: VMAgent
name: some-other-agent
namespace: example
username: foo
# note - the secret above is referenced to provide password
passwordRef:
name: vmagent
key: password
```
`VMAgent`:
```
apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAgent
metadata:
name: example
spec:
selectAllByDefault: true
scrapeInterval: 5s
replicaCount: 1
remoteWrite:
- url: "http://vmauth-vmauth-example:8427/api/v1/write"
# note - the secret above is referenced as well
basicAuth:
username:
name: vmagent
key: username
password:
name: vmagent
key: password
```
</details>
Since both config target exactly the same `Secret` object it is expected
to work, but apparently the result will be `401 Unauthrized` error.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 201fd6de1e)
- Added a bar chart displaying the number of log entries over a time
range.
#6404
- When `_msg` is empty, all fields are displayed in a single line.
- Added double quotes when copying pairs: `key: "value"`.
- Minor style adjustments.
(cherry picked from commit 32fbffedd9)
Check for ranged vector arguments in aggregate expressions when
`-search.disableImplicitConversion` or `-search.logImplicitConversion`
are enabled.
For example, `sum(up[5m])` will fail to execute if these flags are set.
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [*] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 6149adbe10)
### Describe Your Changes
Added config example for `min_dev_from_expected` arg; also, small
styling fixes and alignments
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
The limit is specified with command-line flag
`-search.maxSamplesPerQuery`.
Previously, samples might be over-counted and query can't be fixed by
reducing time range.
address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5851
(cherry picked from commit 6e395048d3)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit f11261dc44)
### Describe Your Changes
small fix of typos in v1.13 presets (vmanomaly docs)
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 1cf28598c6)
### Describe Your Changes
* check if `lastValue` was seen at least twice with different
timestamps. Otherwise, the difference between last timestamp and
previous timestamp could be `0` and will result into `NaN` calculation
* check if there items left in lastValue map after staleness cleanup.
Otherwise, `rate_avg` could have produce `NaN` result.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 51d19485bb)
This change fixes the following panic:
```
2024-06-04T11:16:52.899Z warn app/vmauth/auth_config.go:353 cannot discover backend SRV records for http://srv+localhost:8080: lookup localhost on 10.100.10.4:53: server misbehaving; use it literally
panic: runtime error: integer divide by zero
goroutine 9 [running]:
github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver.handlerWrapper.func1()
/Users/lhhdz/wd/projects/go/VictoriaMetrics/lib/httpserver/httpserver.go:291 +0x58
panic({0x103115100?, 0x10338d700?})
/Users/lhhdz/go/pkg/mod/golang.org/toolchain@v0.0.1-go1.22.3.darwin-arm64/src/runtime/panic.go:770 +0x124
main.getLeastLoadedBackendURL({0x0?, 0x22?, 0x1400014757b?}, 0x1400013c120?)
/Users/lhhdz/wd/projects/go/VictoriaMetrics/app/vmauth/auth_config.go:473 +0x210
main.(*URLPrefix).getBackendURL(0x140000aa080)
/Users/lhhdz/wd/projects/go/VictoriaMetrics/app/vmauth/auth_config.go:312 +0xb8
```
---------
Co-authored-by: Haley Wang <haley@victoriametrics.com>
### Describe Your Changes
Fix 404 relative img links for v1.13.0 update of vmanomaly docs
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 9a355c3512)
### Describe Your Changes
value→valid
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Lapo Luchini <lapo@lapo.it>
(cherry picked from commit 14f586238f)
Add support for markdown format and emoji for the `_msg` field in the
"Group" view.
Add markdown rendering toggle. Disabled by default. Value is stored in
`localStorage`.
It is better to remove deprecated flag completely, so vmctl will
fail if this flag is used and user can immediately fix the issue.
Before, flag was ignored and it is worse then fail fast.
follow-up after 8b46bb0c41 (diff-2bfab3db5cc1baf4c6d3ff6b19901926e3bdf4411ec685dac973e5fcff1c723b)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 8d95522529)
* adds idleConnTimeout flag, which must reduce probability of `broken
pipe` and `connection reset` errors.
* one-time retry trivial network requests for the same backend
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit d44058bcd6)
* deprecate `--vm-disable-progress-bar` in favour of `--disable-progress-bar`
* new `--disable-progress-bar` consistently disables usage of progress bar
for all migration modes.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6367
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 8b46bb0c41)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
…pAuth.*
address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6329,
makes `reloadAuthKey`, `configAuthKey`, `flagsAuthKey`, `pprofAuthKey`
behavior the same way,
but keys like `-snapshotAuthKey`, `-forceMergeAuthKey` are still
protected by httpAuth.*. All the available key are listed in
https://docs.victoriametrics.com/single-server-victoriametrics/#security.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 61dce6f2a1)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Use bytesutil.InternString() instead of strings.Clone() for inputKey and outputKey in aggregatorpushSamples().
This should reduce string allocation rate, since strings can be re-used between aggrState flushes.
- Reduce memory allocations at dedupAggrShard by storing dedupAggrSample by value in the active series map.
- Remove duplicate call to bytesutil.InternBytes() at Deduplicator, since it is already called inside dedupAggr.pushSamples().
- Add missing string interning at rateAggrState.pushSamples().
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6402
The main change is getting rid of interning of sample key. It was
discovered that for cases with many unique time series aggregated by
vmagent interned keys could grow up to hundreds of millions of objects.
This has negative impact on the following aspects:
1. It slows down garbage collection cycles, as GC has to scan all inuse
objects periodically. The higher is the number of inuse objects, the
longer it takes/the more CPU it takes.
2. It slows down the hot path of samples aggregation where each key
needs to be looked up in the map first.
The change makes code more fragile, but suppose to provide performance
optimization for heavy-loaded vmagents with stream aggregation enabled.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
### Describe Your Changes
Added streamaggr metrics to:
- `vm_streamaggr_samples_lag_seconds` - samples lag
- `vm_streamaggr_ignored_samples_total{reason="nan"}` - ignored NaN
samples
- `vm_streamaggr_ignored_samples_total{reason="too_old"}` - ignored old
samples
(cherry picked from commit 185fac03b3)
### Describe Your Changes
Fix for issue #6396: according to rmdir manpage, ENOTEMPTY and EEXIST
should be treated equally
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6396
### Checklist
The following checks are **mandatory**:
- [x ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Ludovic Pollet <ludovic.pollet@exfo.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 3ddae77c63)
