'any' type is supported starting from Go1.18. Let's consistently use it
instead of 'interface{}' type across the code base, since `any` is easier to read than 'interface{}'.
* vmalert: add `query_time_alignment` for rule group
1. add `eval_alignment` attribute for group which by default is true. So group rule query stamp will be aligned with interval and propagated to ALERT metrics and the messages for alertmanager;
2. deprecate `datasource.queryTimeAlignment` flag.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5049
Adds `eval_offset` attribute for Groups.
If specified, Group will be evaluated at the exact time offset on the range of [0...evaluationInterval].
The setting might be useful for cron-like rules which must be evaluated at specific moments of time.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3409
Signed-off-by: Haley Wang <pipilong.25@gmail.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* vmalert: support logs suppressing during config reloads
The change is mostly required for ENT version of vmalert,
since it supports object-storage for config files.
Reading data from object storage could be time-consuming,
so vmalert emits logs to track the progress.
However, these logs are mostly needed on start or on
manual config reload. Printing these logs each time
`rule.configCheckInterval` is triggered would too verbose.
So the change allows to control logs emitting during
config reloads.
Now, logs are emitted during start up or when SIGHUP is receieved.
For periodicall config checks logs emitted by config pkg are suppressed.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: review fixes
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The change also introduces `List` method to `FS` interface.
The `List` method can be used for wildcard support in object storage FS.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* vmalert: support object storage for rules
Support loading of alerting and recording rules from object
storages `gcs://`, `gs://`, `s3://`.
* review fixes
Allow configuring the default number of stored rule's update states in memory
via global `-rule.updateEntriesLimit` command-line flag or per-rule via rule's
`update_entries_limit` configuration param.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Now vmalert will print the following messages on dupliсates:
```
"recording rule \"record\"; expr: \"up == 1\"; labels: summary={{ value|query }}" is a duplicate within the group "test"
"alerting rule \"alert\"; expr: \"up == 1\"; labels: description={{ value|query }}" is a duplicate within the group "test"
```
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3127
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add `debug` mode for alerting rules
Debug information includes alerts state changes and requests
sent to the datasource. Debug can be enabled only on rule's
level. It might be useful for debugging unexpected
behaviour of alerting rule.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3025
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: review fixes
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update app/vmalert/alerting.go
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* vmalert: go fmt
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
The ioutil.{Read|Write}File is deprecated since Go1.16 -
see https://tip.golang.org/doc/go1.16#ioutil
VictoriaMetrics needs at least Go1.18, so it is safe to remove ioutil usage
from source code.
This is a follow-up for 02ca2342ab
vmalert: support `limit` param in groups definition
`limit` param limits number of time series samples produced by a single rule
during execution.
On reaching the limit rule will return an err.
Signed-off-by: lihaowei <haoweili35@gmail.com>
* lib/promscrape: support prometheus-like duration in scrape configs
The change allows to specify duration values like `1d`, `1w`
for fields `scrape_interval`, `scrape_timeout`, etc.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/817#issuecomment-1033384766
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/blockcache: make linter happy
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/promscrape: support prometheus-like duration in scrape configs
* add support for extra fields `scrape_align_interval` and `scrape_offset`;
* support Prometheus duration parsing for `__scrape_interval__`
and `__scrape_duration__` labels;
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
* wip
* docs/CHANGELOG.md: document the feature
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* vmalert: introduce additional HTTP URL params per-group configuration
The new group field `params` allows to configure custom HTTP URL params
per each group. These params will be applied to every request before
executing rule's expression. Hot config reload is also supported.
Field `extra_filter_labels` was deprecated in favour of `params` field.
vmalert will print deprecation log message if config file contains
the deprecated field.
`params` fields are supported by both Prometheus and Graphite datasource types.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: provide more examples for `params` field
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: set higher priority for `params` setting
If there would be a conflict between URL params set in `datasource.url` flag
and params in group definition the latter will have higher priority.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Prometheus allows to have groups with no rules, so we should support
it in vmalert as well for compatibility reasons.
It is also allowed to hot-reload empty groups by adding or removing rules.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
`omitempty` tag resulted into skipping this param on marshaling,
which was used as a checksum for groups configuration. Since on
config reload checksums are compared before applying changes,
any change to `interval` only didn't trigger config reload.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1641
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The new setting `extra_filter_labels` may be assigned to group.
If it is, then all rules within a group will automatically filter
for configured labels. The feature is well-described here
https://docs.victoriametrics.com#prometheus-querying-api-enhancements
New setting is compatible only with VM datasource.
* init implementation for graphite alerts
* adds graphite support for vmalert
* small fix
* changes vmalert graphite api with type
* updates tests
* small fix
* fixes graphite parse
* Fixes graphite from time
On config reload event `vmalert` reloads configuration for every group. While
it works for simple configurations, the more complex and heavy installations may
suffer from frequent config reloads.
The change introduces the `checksum` field for every group and is set to md5 hash
of yaml configuration. The checksum will change if on any change to group
definition like rules order or annotation change. Comparing the `checksum` field
on config reload event helps to detect if group should be updated.
The groups update is now done concurrently, so reload duration will be limited by
the slowest group now.
Partially solves #691 by improving config reload speed.
* VMAlert start with empty rules dir
There are some applications (operator for instance), that generates alerts configuration at runtime
and vmalert must start correctly without rules to support this behaviour.
Later application will add rules files and send SIGHUP to vmalert,
which will trigger reading rules files and start rules exectuion.
Removing rules files with SIGHUP signal must stop rules execution and
vmalert will wait for new rules.
* imports sorted
* added test cases for empty rules, removed blank line
* fixed imports conflict
* updated tests
`external.label` flag supposed to help to distinguish alert or recording rules
source in situations when more than one `vmalert` runs for the same datasource
or AlertManager.
Uniqueness of rule is now defined by combination of its name, expression and
labels. The hash of the combination is now used as rule ID and identifies rule within the group.
Set of rules from coreos/kube-prometheus was added for testing purposes to
verify compatibility. The check also showed that `vmalert` doesn't support
`query` template function that was mentioned as limitation in README.
The feature allows to speed up group rules execution by
executing them concurrently.
Change also contains README changes to reflect configuration
details.
* vmalert: Add recording rules support.
Recording rules support required additional service refactoring since
it wasn't planned to support them from the very beginning. The list
of changes is following:
* new entity RecordingRule was added for writing results of MetricsQL
expressions into remote storage;
* interface Rule now unites both recording and alerting rules;
* configuration parser was moved to separate package and now performs
more strict validation;
* new endpoint for listing all groups and rules in json format was added;
* evaluation interval may be set to every particular group;
* vmalert: uncomment tests
* vmalert: rm outdated TODO
* vmalert: fix typos in README
