VictoriaMetrics/docs/keyConcepts.md

sort
22

Key concepts

Data model

What is a metric

Simply put, metric is a numeric measure or observation of something.

The most common use-cases for metrics are:

• check how the system behaves at the particular time period;
• correlate behavior changes to other measurements;
• observe or forecast trends;
• trigger events (alerts) if the metric exceeds a threshold.

Structure of a metric

Let's start with an example. To track how many requests our application serves, we'll define a metric with the name requests_total.

You can be more specific here by saying requests_success_total (for only successful requests) or request_errors_total (for requests which failed). Choosing a metric name is very important and supposed to clarify what is actually measured to every person who reads it, just like variable names in programming.

Every metric can contain additional meta-information in the form of label-value pairs:

requests_total{path="/", code="200"} 
requests_total{path="/", code="403"} 

The meta-information - a set of labels in curly braces - gives us a context for which path and with what code the request was served. Label-value pairs are always of a string type. VictoriaMetrics data model is schemaless, which means there is no need to define metric names or their labels in advance. User is free to add or change ingested metrics anytime.

Actually, the metric's name is also a label with a special name __name__. So the following two series are identical:

requests_total{path="/", code="200"} 
{__name__="requests_total", path="/", code="200"} 

Time series

A combination of a metric name and its labels defines a time series. For example, requests_total{path="/", code="200"} and requests_total{path="/", code="403"} are two different time series because they have different values for code label.

The number of unique time series has an impact on database resource usage. See what is an active time series and what is high churn rate docs for details.

Cardinality

The number of unique time series is named cardinality. Too big number of unique time series is named high cardinality. High cardinality may result in increased resource usage at VictoriaMetrics. See these docs for more details.

Raw samples

Every unique time series may consist of an arbitrary number of (value, timestamp) data points (aka raw samples) sorted by timestamp. The value is a double-precision floating-point number. The timestamp is a Unix timestamp with millisecond precision.

Below is an example of a single raw sample in Prometheus text exposition format:

requests_total{path="/", code="200"} 123 4567890

• The requests_total{path="/", code="200"} identifies the associated time series for the given sample.
• The 123 is a sample value.
• The 4567890 is an optional timestamp for the sample. If it is missing, then the current timestamp is used when storing the sample in VictoriaMetrics.

Time series resolution

Resolution is the minimum interval between raw samples of the time series. Consider the following example:

----------------------------------------------------------------------
|              <time series>                 | <value> | <timestamp> |
| requests_total{path="/health", code="200"} |    1    |  1676297640 |
| requests_total{path="/health", code="200"} |    2    |  1676297670 |
| requests_total{path="/health", code="200"} |    3    |  1676297700 |
| requests_total{path="/health", code="200"} |    4    |  1676297730 |
....

Here we have a time series requests_total{path="/health", code="200"} which has a value update each 30s. This means, its resolution is also a 30s.

In terms of pull model, resolution is equal to scrape_interval and is controlled by the monitoring system (server). For push model, resolution is an interval between samples timestamps and is controlled by a client (metrics collector).

Try to keep time series resolution consistent, since some MetricsQL functions may expect it to be so.

Types of metrics

Internally, VictoriaMetrics does not have the notion of a metric type. The concept of a metric type exists specifically to help users to understand how the metric was measured. There are 4 common metric types.

Counter

Counter is a metric, which counts some events. Its value increases or stays the same over time. It cannot decrease in general case. The only exception is e.g. counter reset, when the metric resets to zero. The counter reset can occur when the service, which exposes the counter, restarts. So, the counter metric shows the number of observed events since the service start.

In programming, counter is a variable that you increment each time something happens.

vm_http_requests_total is a typical example of a counter. The interpretation of a graph above is that time series vm_http_requests_total{instance="localhost:8428", job="victoriametrics", path="api/v1/query_range"} was rapidly changing from 1:38 pm to 1:39 pm, then there were no changes until 1:41 pm.

Counter is used for measuring the number of events, like the number of requests, errors, logs, messages, etc. The most common MetricsQL functions used with counters are:

• rate - calculates the average per-second speed of metric's change. For example, rate(requests_total) shows how many requests are served per second on average;
• increase - calculates the growth of a metric on the given time period specified in square brackets. For example, increase(requests_total[1h]) shows the number of requests served over the last hour.

It is OK to have fractional counters. For example, request_duration_seconds_sum counter may sum the durations of all the requests. Every duration may have a fractional value in seconds, e.g. 0.5 of a second. So the cumulative sum of all the request durations may be fractional too.

It is recommended to put _total, _sum or _count suffix to counter metric names, so such metrics can be easily differentiated by humans from other metric types.

Gauge

Gauge is used for measuring a value that can go up and down:

The metric process_resident_memory_anon_bytes on the graph shows the memory usage of the application at every given time. It is changing frequently, going up and down showing how the process allocates and frees the memory. In programming, gauge is a variable to which you set a specific value as it changes.

Gauge is used in the following scenarios:

• measuring temperature, memory usage, disk usage etc;
• storing the state of some process. For example, gauge config_reloaded_successful can be set to 1 if everything is good, and to 0 if configuration failed to reload;
• storing the timestamp when the event happened. For example, config_last_reload_success_timestamp_seconds can store the timestamp of the last successful configuration reload.

The most common MetricsQL functions used with gauges are aggregation functions and rollup functions.

Histogram

Historgram is a set of counter metrics with different vmrange or le labels. The vmrange or le labels define measurement boundaries of a particular bucket. When the observed measurement hits a particular bucket, then the corresponding counter is incremented.

Histogram buckets usually have _bucket suffix in their names. For example, VictoriaMetrics tracks the distribution of rows processed per query with the vm_rows_read_per_query histogram. The exposition format for this histogram has the following form:

vm_rows_read_per_query_bucket{vmrange="4.084e+02...4.642e+02"} 2
vm_rows_read_per_query_bucket{vmrange="5.275e+02...5.995e+02"} 1
vm_rows_read_per_query_bucket{vmrange="8.799e+02...1.000e+03"} 1
vm_rows_read_per_query_bucket{vmrange="1.468e+03...1.668e+03"} 3
vm_rows_read_per_query_bucket{vmrange="1.896e+03...2.154e+03"} 4
vm_rows_read_per_query_sum 15582
vm_rows_read_per_query_count 11

The vm_rows_read_per_query_bucket{vmrange="4.084e+02...4.642e+02"} 2 line means that there were 2 queries with the number of rows in the range (408.4 - 464.2] since the last VictoriaMetrics start.

The counters ending with _bucket suffix allow estimating arbitrary percentile for the observed measurement with the help of histogram_quantile function. For example, the following query returns the estimated 99th percentile on the number of rows read per each query during the last hour (see 1h in square brackets):

histogram_quantile(0.99, sum(increase(vm_rows_read_per_query_bucket[1h])) by (vmrange))

This query works in the following way:

1. The increase(vm_rows_read_per_query_bucket[1h]) calculates per-bucket per-instance number of events over the last hour.

2. The sum(...) by (vmrange) calculates per-bucket events by summing per-instance buckets with the same vmrange values.

3. The histogram_quantile(0.99, ...) calculates 99th percentile over vmrange buckets returned at step 2.

Histogram metric type exposes two additional counters ending with _sum and _count suffixes:

• the vm_rows_read_per_query_sum is a sum of all the observed measurements, e.g. the sum of rows served by all the queries since the last VictoriaMetrics start.

• the vm_rows_read_per_query_count is the total number of observed events, e.g. the total number of observed queries since the last VictoriaMetrics start.

These counters allow calculating the average measurement value on a particular lookbehind window. For example, the following query calculates the average number of rows read per query during the last 5 minutes (see 5m in square brackets):

increase(vm_rows_read_per_query_sum[5m]) / increase(vm_rows_read_per_query_count[5m])

The vm_rows_read_per_query histogram may be used in Go application in the following way by using the github.com/VictoriaMetrics/metrics package:

// define the histogram
rowsReadPerQuery := metrics.NewHistogram(`vm_rows_read_per_query`)

// use the histogram during processing
for _, query := range queries {
    rowsReadPerQuery.Update(float64(len(query.Rows)))
}

Now let's see what happens each time when rowsReadPerQuery.Update is called:

• counter vm_rows_read_per_query_sum is incremented by value of len(query.Rows) expression;
• counter vm_rows_read_per_query_count increments by 1;
• counter vm_rows_read_per_query_bucket gets incremented only if observed value is within the range (bucket) defined in vmrange.

Such a combination of counter metrics allows plotting Heatmaps in Grafana and calculating quantiles:

Grafana doesn't understand buckets with vmrange labels, so the prometheus_buckets function must be used for converting buckets with vmrange labels to buckets with le labels before building heatmaps in Grafana.

Histograms are usually used for measuring the distribution of latency, sizes of elements (batch size, for example) etc. There are two implementations of a histogram supported by VictoriaMetrics:

1. Prometheus histogram. The canonical histogram implementation is supported by most of the client libraries for metrics instrumentation. Prometheus histogram requires a user to define ranges (buckets) statically.
2. VictoriaMetrics histogram supported by VictoriaMetrics/metrics instrumentation library. Victoriametrics histogram automatically handles bucket boundaries, so users don't need to think about them.

We recommend reading the following articles before you start using histograms:

1. Prometheus histogram
2. Histograms and summaries
3. How does a Prometheus Histogram work?
4. Improving histogram usability for Prometheus and Grafana

Summary

Summary metric type is quite similar to histogram and is used for quantiles calculations. The main difference is that calculations are made on the client-side, so metrics exposition format already contains pre-defined quantiles:

go_gc_duration_seconds{quantile="0"} 0
go_gc_duration_seconds{quantile="0.25"} 0
go_gc_duration_seconds{quantile="0.5"} 0
go_gc_duration_seconds{quantile="0.75"} 8.0696e-05
go_gc_duration_seconds{quantile="1"} 0.001222168
go_gc_duration_seconds_sum 0.015077078
go_gc_duration_seconds_count 83

The visualisation of summaries is pretty straightforward:

Such an approach makes summaries easier to use but also puts significant limitations compared to histograms:

• It is impossible to calculate quantile over multiple summary metrics, e.g. sum(go_gc_duration_seconds{quantile="0.75"}), avg(go_gc_duration_seconds{quantile="0.75"}) or max(go_gc_duration_seconds{quantile="0.75"}) won't return the expected 75th percentile over go_gc_duration_seconds metrics collected from multiple instances of the application. See this article for details.

• It is impossible to calculate quantiles other than the already pre-calculated quantiles.

• It is impossible to calculate quantiles for measurements collected over an arbitrary time range. Usually, summary quantiles are calculated over a fixed time range such as the last 5 minutes.

Summaries are usually used for tracking the pre-defined percentiles for latency, sizes of elements (batch size, for example) etc.

Instrumenting application with metrics

As was said at the beginning of the types of metrics section, metric type defines how it was measured. VictoriaMetrics TSDB doesn't know about metric types. All it sees are metric names, labels, values, and timestamps. What are these metrics, what do they measure, and how - all this depends on the application which emits them.

To instrument your application with metrics compatible with VictoriaMetrics we recommend using github.com/VictoriaMetrics/metrics package. See more details on how to use it in this article.

VictoriaMetrics is also compatible with Prometheus client libraries for metrics instrumentation.

Naming

We recommend following Prometheus naming convention for metrics. There are no strict restrictions, so any metric name and labels are accepted by VictoriaMetrics. But the convention helps to keep names meaningful, descriptive, and clear to other people. Following convention is a good practice.

Labels

Every measurement can contain an arbitrary number of key="value" labels. The good practice is to keep this number limited. Otherwise, it would be difficult to deal with measurements containing a big number of labels. By default, VictoriaMetrics limits the number of labels per measurement to 30 and drops other labels. This limit can be changed via -maxLabelsPerTimeseries command-line flag if necessary (but this isn't recommended).

Every label value can contain an arbitrary string value. The good practice is to use short and meaningful label values to describe the attribute of the metric, not to tell the story about it. For example, label-value pair environment="prod" is ok, but log_message="long log message with a lot of details..." is not ok. By default, VcitoriaMetrics limits label's value size with 16kB. This limit can be changed via -maxLabelValueLen command-line flag.

It is very important to keep under control the number of unique label values, since every unique label value leads to a new time series. Try to avoid using volatile label values such as session ID or query ID in order to avoid excessive resource usage and database slowdown.

Write data

VictoriaMetrics supports both models used in modern monitoring applications: push and pull.

Push model

Client regularly sends the collected metrics to the server in the push model:

The client (application) decides when and where to send its metrics. VictoriaMetrics supports the following protocols for data ingestion (aka push protocols):

• Prometheus remote write API.
• Prometheus text exposition format.
• DataDog protocol.
• InfluxDB line protocol over HTTP, TCP and UDP.
• Graphite plaintext protocol with tags.
• OpenTSDB put message.
• HTTP OpenTSDB /api/put requests.
• JSON line format.
• Arbitrary CSV data.

All the protocols are fully compatible with VictoriaMetrics data model and can be used in production. We recommend using the github.com/VictoriaMetrics/metrics package for pushing application metrics to VictoriaMetrics. It is also possible to use already existing clients compatible with the protocols listed above like Telegraf for InfluxDB line protocol.

Creating custom clients or instrumenting the application for metrics writing is as easy as sending a POST request:

curl -d '{"metric":{"__name__":"foo","job":"node_exporter"},"values":[0,1,2],"timestamps":[1549891472010,1549891487724,1549891503438]}' -X POST 'http://localhost:8428/api/v1/import'

It is allowed to push/write metrics to single-node VictoriaMetrics, to cluster component vminsert and to vmagent.

The pros of push model:

• Simpler configuration at VictoriaMetrics side - there is no need to configure VictoriaMetrics with locations of the monitored applications. There is no need in complex service discovery schemes.
• Simpler security setup - there is no need to set up access from VictoriaMetrics to each monitored application.

See Foiled by the Firewall: A Tale of Transition From Prometheus to VictoriaMetrics elaborating more on why Percona switched from pull to push model.

The cons of push protocol:

• Increased configuration complexity for monitored applications. Every application needs to be individually configured with the address of the monitoring system for metrics delivery. It also needs to be configured with the interval between metric pushes and the strategy in case of metric delivery failure.
• Non-trivial setup for metrics' delivery into multiple monitoring systems.
• It may be hard to tell whether the application went down or just stopped sending metrics for a different reason.
• Applications can overload the monitoring system by pushing metrics at too short intervals.

Pull model

Pull model is an approach popularized by Prometheus, where the monitoring system decides when and where to pull metrics from:

In pull model, the monitoring system needs to be aware of all the applications it needs to monitor. The metrics are scraped (pulled) from the known applications (aka scrape targets) via HTTP protocol on a regular basis (aka scrape_interval).

VictoriaMetrics supports discovering Prometheus-compatible targets and scraping metrics from them in the same way as Prometheus does - see these docs.

Metrics scraping is supported by single-node VictoriaMetrics and by vmagent.

The pros of the pull model:

• Easier to debug - VictoriaMetrics knows about all the monitored applications (aka scrape targets). The up == 0 query instantly shows unavailable scrape targets. The actual information about scrape targets is available at http://victoriametrics:8428/targets and http://vmagent:8429/targets.
• Monitoring system controls the frequency of metrics' scrape, so it is easier to control its load.
• Applications aren't aware of the monitoring system and don't need to implement the logic for metrics delivery.

The cons of the pull model:

• Harder security setup - monitoring system needs to have access to applications it monitors.
• Pull model needs non-trivial service discovery schemes.

Common approaches for data collection

VictoriaMetrics supports both push and pull models for data collection. Many installations use exclusively one of these models, or both at once.

The most common approach for data collection is using both models:

In this approach the additional component is used - vmagent. Vmagent is a lightweight agent whose main purpose is to collect, filter, relabel and deliver metrics to VictoriaMetrics. It supports all push and pull protocols mentioned above.

The basic monitoring setup of VictoriaMetrics and vmagent is described in the example docker-compose manifest. In this example vmagent scrapes a list of targets and forwards collected data to VictoriaMetrics. VictoriaMetrics is then used as a datasource for Grafana installation for querying collected data.

VictoriaMetrics components allow building more advanced topologies. For example, vmagents can push metrics from separate datacenters to the central VictoriaMetrics:

VictoriaMetrics in this example may be either single-node VictoriaMetrics or VictoriaMetrics Cluster. Vmagent also allows replicating the same data to multiple destinations.

Query data

VictoriaMetrics provides an HTTP API for serving read queries. The API is used in various integrations such as Grafana. The same API is also used by VMUI - a graphical User Interface for querying and visualizing metrics.

The API consists of two main handlers for serving instant queries and range queries.

Instant query

Instant query executes the query expression at the given timestamp:

GET | POST /api/v1/query?query=...&time=...&step=...

Params:

• query - MetricsQL expression.
• time - optional timestamp when to evaluate the query. If time is skipped, then the current timestamp is used. The time param can be specified in multiple allowed formats.
• step - optional max lookback window for searching for raw samples when executing the query. If step is skipped, then it is set to 5m (5 minutes) by default.

To understand how instant queries work, let's begin with a data sample:

foo_bar 1.00 1652169600000 # 2022-05-10 10:00:00
foo_bar 2.00 1652169660000 # 2022-05-10 10:01:00
foo_bar 3.00 1652169720000 # 2022-05-10 10:02:00
foo_bar 5.00 1652169840000 # 2022-05-10 10:04:00, one point missed
foo_bar 5.50 1652169960000 # 2022-05-10 10:06:00, one point missed
foo_bar 5.50 1652170020000 # 2022-05-10 10:07:00
foo_bar 4.00 1652170080000 # 2022-05-10 10:08:00
foo_bar 3.50 1652170260000 # 2022-05-10 10:11:00, two points missed
foo_bar 3.25 1652170320000 # 2022-05-10 10:12:00
foo_bar 3.00 1652170380000 # 2022-05-10 10:13:00
foo_bar 2.00 1652170440000 # 2022-05-10 10:14:00
foo_bar 1.00 1652170500000 # 2022-05-10 10:15:00
foo_bar 4.00 1652170560000 # 2022-05-10 10:16:00

The data sample contains a list of samples for foo_bar time series with time intervals between samples from 1m to 3m. If we plot this data sample on the graph, it will have the following form:

To get the value of foo_bar metric at some specific moment of time, for example 2022-05-10 10:03:00, in VictoriaMetrics we need to issue an instant query:

curl "http://<victoria-metrics-addr>/api/v1/query?query=foo_bar&time=2022-05-10T10:03:00.000Z"

{
  "status": "success",
  "data": {
    "resultType": "vector",
    "result": [
      {
        "metric": {
          "__name__": "foo_bar"
        },
        "value": [
          1652169780,
          "3"
        ]
      }
    ]
  }
}

In response, VictoriaMetrics returns a single sample-timestamp pair with a value of 3 for the series foo_bar at the given moment of time 2022-05-10 10:03. But, if we take a look at the original data sample again, we'll see that there is no raw sample at 2022-05-10 10:03. What happens here if there is no raw sample at the requested timestamp - VictoriaMetrics will try to locate the closest sample on the left to the requested timestamp:

The time range at which VictoriaMetrics will try to locate a missing data sample is equal to 5m by default and can be overridden via step parameter.

Instant query can return multiple time series, but always only one data sample per series. Instant queries are used in the following scenarios:

• Getting the last recorded value;
• For alerts and recording rules evaluation;
• Plotting Stat or Table panels in Grafana.

Range query

Range query executes the query expression at the given time range with the given step:

GET | POST /api/v1/query_range?query=...&start=...&end=...&step=...

Params:

• query - MetricsQL expression.
• start - the starting timestamp of the time range for query evaluation.
• end - the ending timestamp of the time range for query evaluation. If the end isn't set, then the end is automatically set to the current time.
• step - the interval between datapoints, which must be returned from the range query. The query is executed at start, start+step, start+2*step, ..., end timestamps. If the step isn't set, then it is automatically set to 5m (5 minutes).

The start and end params can be specified in multiple allowed formats.

To get the values of foo_bar on the time range from 2022-05-10 09:59:00 to 2022-05-10 10:17:00, in VictoriaMetrics we need to issue a range query:

curl "http://<victoria-metrics-addr>/api/v1/query_range?query=foo_bar&step=1m&start=2022-05-10T09:59:00.000Z&end=2022-05-10T10:17:00.000Z"

{
  "status": "success",
  "data": {
    "resultType": "matrix",
    "result": [
      {
        "metric": {
          "__name__": "foo_bar"
        },
        "values": [
          [
            1652169600,
            "1"
          ],
          [
            1652169660,
            "2"
          ],
          [
            1652169720,
            "3"
          ],
          [
            1652169780,
            "3"
          ],
          [
            1652169840,
            "7"
          ],
          [
            1652169900,
            "7"
          ],
          [
            1652169960,
            "7.5"
          ],
          [
            1652170020,
            "7.5"
          ],
          [
            1652170080,
            "6"
          ],
          [
            1652170140,
            "6"
          ],
          [
            1652170260,
            "5.5"
          ],
          [
            1652170320,
            "5.25"
          ],
          [
            1652170380,
            "5"
          ],
          [
            1652170440,
            "3"
          ],
          [
            1652170500,
            "1"
          ],
          [
            1652170560,
            "4"
          ],
          [
            1652170620,
            "4"
          ]
        ]
      }
    ]
  }
}

In response, VictoriaMetrics returns 17 sample-timestamp pairs for the series foo_bar at the given time range from 2022-05-10 09:59:00 to 2022-05-10 10:17:00. But, if we take a look at the original data sample again, we'll see that it contains only 13 raw samples. What happens here is that the range query is actually an instant query executed 1 + (start-end)/step times on the time range from start to end. If we plot this request in VictoriaMetrics the graph will be shown as the following:

The blue dotted lines on the pic are the moments when the instant query was executed. Since instant query retains the ability to locate the missing point, the graph contains two types of points: real and ephemeral data points. ephemeral data point always repeats the left closest raw sample (see red arrow on the pic above).

This behavior of adding ephemeral data points comes from the specifics of the pull model:

• Metrics are scraped at fixed intervals.
• Scrape may be skipped if the monitoring system is overloaded.
• Scrape may fail due to network issues.

According to these specifics, the range query assumes that if there is a missing raw sample then it is likely a missed scrape, so it fills it with the previous raw sample. The same will work for cases when step is lower than the actual interval between samples. In fact, if we set step=1s for the same request, we'll get about 1 thousand data points in response, where most of them are ephemeral.

Sometimes, the lookbehind window for locating the datapoint isn't big enough and the graph will contain a gap. For range queries, lookbehind window isn't equal to the step parameter. It is calculated as the median of the intervals between the first 20 raw samples in the requested time range. In this way, VictoriaMetrics automatically adjusts the lookbehind window to fill gaps and detect stale series at the same time.

Range queries are mostly used for plotting time series data over specified time ranges. These queries are extremely useful in the following scenarios:

• Track the state of a metric on the time interval;
• Correlate changes between multiple metrics on the time interval;
• Observe trends and dynamics of the metric change.

If you need to export raw samples from VictoriaMetrics, then take a look at export APIs.

MetricsQL

VictoriaMetrics provide a special query language for executing read queries - MetricsQL. It is a PromQL-like query language with a powerful set of functions and features for working specifically with time series data. MetricsQL is backward-compatible with PromQL, so it shares most of the query concepts. The basic concepts for PromQL and MetricsQL are described here.

Filtering

In sections instant query and range query we've already used MetricsQL to get data for metric foo_bar. It is as simple as just writing a metric name in the query:

foo_bar

A single metric name may correspond to multiple time series with distinct label sets. For example:

requests_total{path="/", code="200"} 
requests_total{path="/", code="403"} 

To select only time series with specific label value specify the matching condition in curly braces:

requests_total{code="200"} 

The query above will return all time series with the name requests_total and code="200". We use the operator = to match a label value. For negative match use != operator. Filters also support regex matching =~ for positive and !~ for negative matching:

requests_total{code=~"2.*"}

Filters can also be combined:

requests_total{code=~"200|204", path="/home"}

The query above will return all time series with a name requests_total, status code 200 or 204and path="/home" .

Filtering by name

Sometimes it is required to return all the time series for multiple metric names. As was mentioned in the data model section, the metric name is just an ordinary label with a special name — __name__. So filtering by multiple metric names may be performed by applying regexps on metric names:

{__name__=~"requests_(error|success)_total"}

The query above is supposed to return series for two metrics: requests_error_total and requests_success_total.

Arithmetic operations

MetricsQL supports all the basic arithmetic operations:

• addition - +
• subtraction - -
• multiplication - *
• division - /
• modulo - %
• power - ^

This allows performing various calculations across multiple metrics. For example, the following query calculates the percentage of error requests:

(requests_error_total / (requests_error_total + requests_success_total)) * 100

Combining multiple series

Combining multiple time series with arithmetic operations requires an understanding of matching rules. Otherwise, the query may break or may lead to incorrect results. The basics of the matching rules are simple:

• MetricsQL engine strips metric names from all the time series on the left and right side of the arithmetic operation without touching labels.
• For each time series on the left side MetricsQL engine searches for the corresponding time series on the right side with the same set of labels, applies the operation for each data point and returns the resulting time series with the same set of labels. If there are no matches, then the time series is dropped from the result.
• The matching rules may be augmented with ignoring, on, group_left and group_right modifiers. See these docs for details.

Comparison operations

MetricsQL supports the following comparison operators:

• equal - ==
• not equal - !=
• greater - >
• greater-or-equal - >=
• less - <
• less-or-equal - <=

These operators may be applied to arbitrary MetricsQL expressions as with arithmetic operators. The result of the comparison operation is time series with only matching data points. For instance, the following query would return series only for processes where memory usage exceeds 100MB:

process_resident_memory_bytes > 100*1024*1024

Aggregation and grouping functions

MetricsQL allows aggregating and grouping of time series. Time series are grouped by the given set of labels and then the given aggregation function is applied individually per each group. For instance, the following query returns summary memory usage for each job:

sum(process_resident_memory_bytes) by (job)

See docs for aggregate functions in MetricsQL.

Calculating rates

One of the most widely used functions for counters is rate. It calculates the average per-second increase rate individually per each matching time series. For example, the following query shows the average per-second data receive speed per each monitored node_exporter instance, which exposes the node_network_receive_bytes_total metric:

rate(node_network_receive_bytes_total)

By default VictoriaMetrics calculates the rate over raw samples on the lookbehind window specified in the step param passed either to instant query or to range query. The interval on which rate needs to be calculated can be specified explicitly as duration in square brackets:

 rate(node_network_receive_bytes_total[5m])

In this case VictoriaMetrics uses the specified lookbehind window - 5m (5 minutes) - for calculating the average per-second increase rate. Bigger lookbehind windows usually lead to smoother graphs.

rate strips metric name while leaving all the labels for the inner time series. If you need to keep the metric name, then add keep_metric_names modifier after the rate(..). For example, the following query leaves metric names after calculating the rate():

rate(node_network_receive_bytes_total) keep_metric_names

rate() must be applied only to counters. The result of applying the rate() to gauge is undefined.

Visualizing time series

VictoriaMetrics has a built-in graphical User Interface for querying and visualizing metrics - VMUI. Open http://victoriametrics:8428/vmui page, type the query and see the results:

VictoriaMetrics supports Prometheus HTTP API which makes it possible to query it with Grafana in the same way as Grafana queries Prometheus.

Modify data

VictoriaMetrics stores time series data in MergeTree-like data structures. While this approach is very efficient for write-heavy databases, it applies some limitations on data updates. In short, modifying already written time series requires re-writing the whole data block where it is stored. Due to this limitation, VictoriaMetrics does not support direct data modification.

Deletion

See How to delete time series .

Relabeling

Relabeling is a powerful mechanism for modifying time series before they have been written to the database. Relabeling may be applied for both push and pull models. See more details here.

Deduplication

VictoriaMetrics supports data deduplication. See these docs.

Downsampling

VictoriaMetrics supports data downsampling. See these docs.