VictoriaMetrics/docs/vmrestore.md

sort
7

vmrestore

vmrestore restores data from backups created by vmbackup.

Restore process can be interrupted at any time. It is automatically resumed from the interruption point when restarting vmrestore with the same args.

Usage

VictoriaMetrics must be stopped during the restore process.

Run the following command to restore backup from the given -src into the given -storageDataPath:

./vmrestore -src=<storageType>://<path/to/backup> -storageDataPath=<local/path/to/restore>

• <storageType>://<path/to/backup> is the path to backup made with vmbackup. vmrestore can restore backups from the following storage types:
  • GCS. Example: -src=gs://<bucket>/<path/to/backup>
  • S3. Example: -src=s3://<bucket>/<path/to/backup>
  • Azure Blob Storage. Example: -src=azblob://<container>/<path/to/backup>
  • Any S3-compatible storage such as MinIO, Ceph or Swift. See these docs for details.
  • Local filesystem. Example: -src=fs://</absolute/path/to/backup>. Note that vmbackup prevents from storing the backup into the directory pointed by -storageDataPath command-line flag, since this directory should be managed solely by VictoriaMetrics or vmstorage.
• <local/path/to/restore> is the path to folder where data will be restored. This folder must be passed to VictoriaMetrics in -storageDataPath command-line flag after the restore process is complete.

The original -storageDataPath directory may contain old files. They will be substituted by the files from backup, i.e. the end result would be similar to rsync --delete.

Troubleshooting

• If vmrestore eats all the network bandwidth, then set -maxBytesPerSecond to the desired value.
• If vmrestore has been interrupted due to temporary error, then just restart it with the same args. It will resume the restore process.

Advanced usage

• Obtaining credentials from a file.

  Add flag -credsFilePath=/etc/credentials with following content:

  for s3 (aws, minio or other s3 compatible storages):

  [default]
  aws_access_key_id=theaccesskey
  aws_secret_access_key=thesecretaccesskeyvalue
  

  for gce cloud storage:

  {
         "type": "service_account",
         "project_id": "project-id",
         "private_key_id": "key-id",
         "private_key": "-----BEGIN PRIVATE KEY-----\nprivate-key\n-----END PRIVATE KEY-----\n",
         "client_email": "service-account-email",
         "client_id": "client-id",
         "auth_uri": "https://accounts.google.com/o/oauth2/auth",
         "token_uri": "https://accounts.google.com/o/oauth2/token",
         "auth_provider_x509_cert_url": "https://www.googleapis.com/oauth2/v1/certs",
         "client_x509_cert_url": "https://www.googleapis.com/robot/v1/metadata/x509/service-account-email"
  }
  

• Usage with s3 custom url endpoint. It is possible to use vmrestore with s3 api compatible storages, like minio, cloudian and other. You have to add custom url endpoint with a flag:

  # for minio:
  -customS3Endpoint=http://localhost:9000

  # for aws gov region
  -customS3Endpoint=https://s3-fips.us-gov-west-1.amazonaws.com

• Run vmrestore -help in order to see all the available options:

  -concurrency int
     The number of concurrent workers. Higher concurrency may reduce restore duration (default 10)
  -configFilePath string
     Path to file with S3 configs. Configs are loaded from default location if not set.
     See https://docs.aws.amazon.com/general/latest/gr/aws-security-credentials.html
  -configProfile string
     Profile name for S3 configs. If no set, the value of the environment variable will be loaded (AWS_PROFILE or AWS_DEFAULT_PROFILE), or if both not set, DefaultSharedConfigProfile is used
  -credsFilePath string
     Path to file with GCS or S3 credentials. Credentials are loaded from default locations if not set.
     See https://cloud.google.com/iam/docs/creating-managing-service-account-keys and https://docs.aws.amazon.com/general/latest/gr/aws-security-credentials.html
  -customS3Endpoint string
     Custom S3 endpoint for use with S3-compatible storages (e.g. MinIO). S3 is used if not set
  -enableTCP6
     Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP and UDP is used
  -envflag.enable
     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
  -envflag.prefix string
     Prefix for environment variables if -envflag.enable is set
  -eula
     By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/assets/VM_EULA.pdf . This flag is available only in VictoriaMetrics enterprise. See https://docs.victoriametrics.com/enterprise.html
  -flagsAuthKey string
     Auth key for /flags endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
  -fs.disableMmap
     Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
  -http.connTimeout duration
     Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
  -http.disableResponseCompression
     Disable compression of HTTP responses to save CPU resources. By default compression is enabled to save network bandwidth
  -http.idleConnTimeout duration
     Timeout for incoming idle http connections (default 1m0s)
  -http.maxGracefulShutdownDuration duration
     The maximum duration for a graceful shutdown of the HTTP server. A highly loaded server may require increased value for a graceful shutdown (default 7s)
  -http.pathPrefix string
     An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
  -http.shutdownDelay duration
     Optional delay before http server shutdown. During this delay, the server returns non-OK responses from /health page, so load balancers can route new requests to other servers
  -httpAuth.password string
     Password for HTTP Basic Auth. The authentication is disabled if -httpAuth.username is empty
  -httpAuth.username string
     Username for HTTP Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
  -httpListenAddr string
     TCP address for exporting metrics at /metrics page (default ":8421")
  -loggerDisableTimestamps
     Whether to disable writing timestamps in logs
  -loggerErrorsPerSecondLimit int
     Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
  -loggerFormat string
     Format for logs. Possible values: default, json (default "default")
  -loggerLevel string
     Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO")
  -loggerOutput string
     Output for the logs. Supported values: stderr, stdout (default "stderr")
  -loggerTimezone string
     Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
  -loggerWarnsPerSecondLimit int
     Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
  -maxBytesPerSecond size
     The maximum download speed. There is no limit if it is set to 0
     Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
  -memory.allowedBytes size
     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
     Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
  -memory.allowedPercent float
     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
  -metricsAuthKey string
     Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
  -pprofAuthKey string
     Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
  -pushmetrics.extraLabel array
     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabel='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
     Supports an array of values separated by comma or specified via multiple flags.
  -pushmetrics.interval duration
     Interval for pushing metrics to -pushmetrics.url (default 10s)
  -pushmetrics.url array
     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
     Supports an array of values separated by comma or specified via multiple flags.
  -s3ForcePathStyle
     Prefixing endpoint with bucket name when set false, true by default. (default true)
  -skipBackupCompleteCheck
     Whether to skip checking for 'backup complete' file in -src. This may be useful for restoring from old backups, which were created without 'backup complete' file
  -src string
     Source path with backup on the remote storage. Example: gs://bucket/path/to/backup, s3://bucket/path/to/backup, azblob://container/path/to/backup or fs:///path/to/local/backup
  -storageDataPath string
     Destination path where backup must be restored. VictoriaMetrics must be stopped when restoring from backup. -storageDataPath dir can be non-empty. In this case the contents of -storageDataPath dir is synchronized with -src contents, i.e. it works like 'rsync --delete' (default "victoria-metrics-data")
  -tls
     Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set
  -tlsCertFile string
     Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
  -tlsCipherSuites array
     Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
     Supports an array of values separated by comma or specified via multiple flags.
  -tlsKeyFile string
     Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
  -tlsMinVersion string
     Optional minimum TLS version to use for incoming requests over HTTPS if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
  -version
     Show VictoriaMetrics version

How to build from sources

It is recommended using binary releases - see vmutils-* archives there.

Development build

1. Install Go. The minimum supported version is Go 1.19.
2. Run make vmrestore from the root folder of the repository. It builds vmrestore binary and puts it into the bin folder.

Production build

1. Install docker.
2. Run make vmrestore-prod from the root folder of the repository. It builds vmrestore-prod binary and puts it into the bin folder.

Building docker images

Run make package-vmrestore. It builds victoriametrics/vmrestore:<PKG_TAG> docker image locally. <PKG_TAG> is auto-generated image tag, which depends on source code in the repository. The <PKG_TAG> may be manually set via PKG_TAG=foobar make package-vmrestore.

The base docker image is alpine but it is possible to use any other base image by setting it via <ROOT_IMAGE> environment variable. For example, the following command builds the image on top of scratch image:

ROOT_IMAGE=scratch make package-vmrestore