Added "VM.pool_migrate" to the list of tasks suitable for meddling actions.
Removed the usage of MeddlingActionTitle other_config key, because it wasn't working as intended for two reasons:
- If XenCenter starts an action that does multiple async api calls, so multiple tasks, the action's title is assigned to all tasks as MeddlingActionTitles, so the second XenCenter instance would create multiple meddling actions with the same title.
- When a second XenCenter instance tries to see if a task is suitable for a meddling action, the MeddlingActionTitle is not yet present in the task's other_config, so the task is ignored in most of the cases.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Further changes
* implemented similar logic for the Commands too as those are keep on getting updates so affected
* moved these static fields to a class (at Images)
* used the same casing as in Resources once they have been moved
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
This change does not apply to supplemental packs, as we should be able to install supp packs to individual hosts in a pool.
Also, if the wizard is installing an update from disk and we cannot match it in updates.xml, then we will continue to allow host selection, because we can't tell whether it is a supp pack or a hotfix.
Plus fixing the bug where the "Select All" button is enabled even when all the selectable servers/pools are selected
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changed code at a a few places where it made sense to limit how many times XenCenter asks the Resource Manager for a new instance(*1) of the same(*2) image.
*1: RM returns a new object each time
*2: they are the same as we don't change the locale of a thread and also we don't localise these images - by design
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Added a check for default_template as a workaround an issue where the allowed_operations of a default template _initially_ indicated that cross pool migration was allowed.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Replaced the information tooltip with a warning icon and label at the bottom of the page.
- Added some null checks
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
have the wizard do it before we get there. Also, replaced the labels in such way
that, if there should be lag, the user will not see the draft message used only
on the designer.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Added a new method in XenTabPage which the derived classes can implement to select a default control after the page is loaded.
- Added a new wizard test that runs through the wizard by pressing the Enter key and checks if it has landed on the right page.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- On the PVS Cache Configuration dialog, disable the cache storage fields with an information tooltip stating that this PVS cache storage cannot be changed because it is in use.
- Also set the minimum width for the splitter panels, to avoid display issues when the splitter is moved and either of the panels becomes unusable.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
According to the Microsoft style guide XC to use 'username' for UI fields and use 'user name' when it's being referred to.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Show the "Change role" dialog as modal. This way we avoid other issues, like removing the user while the "Change role" dialog is open.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Set the suppressHistory flag to true for the parallel action that we run periodically to check the Health Check analysis result
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* [CA-233454] PVS tab doesn't show a new VM when it's created
Refined the rules for not adding a VM to the table, if it is a template (thus not_a_real_vm), and it has the __gui__ prefix (thus hidden), we still add it, but hide it.
When its name is changed (to remove the __gui__ prefix), we update its name and re-calculate whether it should be visible (in the case of a new VM this will be true once the __gui__ prefix is gone). Also resort the table if a node changes from hidden to visible, because it appears as an addition to the table.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* [CA-233454] Update criteria for VM visibility to include is_a_real_vm
is_a_template is changed before the name_label removes the __gui__ prefix, so this works with no other changes to the vm property changed event.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* [CA-233454] Update when the VMs are shown in the PVS list
New observable property IsBeingCreated for VMs, set to true when they're made a hidden object, and false when they're removed from hidden objects (both in CreateVMAction). In the PVS Page when this is set to false, we re-evaluate whether a VM can be shown. This means that new VMs show here at the same time they're added to the tree (only different is tree refresh time), instead of far earlier (and before their networks were added).
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* [CA-233454] Set IsbeingCreated in the CreateVMFastAction
* [CA-233454] Properly support the VM Fast Create action
Further changes to CreateVMFastAction, to ensure it works with PVS tab - use the __gui__ prefix when the VM is created and then change it back just before showing.
* [CA-233454] Small logic adjustments/tidying up
This commit is to fix the following: "when right clicking a disconnected pool the context menu gives you the option to connect, this opens a window to enter credentials. if you close this window (either by cancel or the X), next time when you right click and click connect, nothing happens. you have to restart XenCenter to connect to the pool"
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Changed the tree builder so that the tree nodes rely on the TreeView's font. If the nodes have their NodeFont != null, then a tree update causes new fonts to be generated for each node and when fonts are being created faster than they could be cleaned up, we reach the GLI handles limit of 10000 (which causes the Out of Memory exception).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
If batch updating fails in a pool, this code will do the clean up by
running the appropriate (next in the queue) RemoveUpdateFilesFromMaster action. In addition to Pool_update.clean(), Pool_update.destroy() will be called when needed.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
confirmations are displayed. Added checkboxes to the dialogs requesting confirmation
of dismissal of notifications so the user can opt to skip this step.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Changes as discussed on the ticket: No longer disable the rows when they have a warning in the dialog, support warning about storage configuration as well as PVS configuration, and also include these warnings in the PVS page table.
A site's configuration needs to be completed outside of XenCenter, and when it isn't done we shouldn't allow VMs to enable PVS read caching on that site. We now disable sites that aren't configured in the enable read caching dialog, using an EnableableComboBox. I've also changed the DrawMode of that ComboBox component, OwnerDrawFixed more appropriately sizes the dropdown container when the number of items is small.
quiesce after installing vss tools
Enabling snapshot policy type to be changed to quiesce from
other snapshot policy types if the selected VMs are
quiesce snapshot capable.
Signed-off-by: Sharath Babu <sharath.babu@citrix.com>
The Pool_update does not always covers all the VDIs XenCenter creates. These orphaned ones have to be deleted as well.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Moved to A for Dismiss All, and E for Dismiss Selected. Since this frees D (the toolstrip menu split button uses one of these, so was previously always D), moved Filter by Date from A to D.
For ISO updates, when disabling hosts, use the filename matching logic for pre-Ely hosts as well.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Modify the cleanup pool update action to also call update destroy (removing the update from xapi db) when the update has not been applied to any hosts (ie we cancelled the wizard before completion).
This happened because the LivePatchCodesByHost was null when the prechecks were generated for an update, so the live patch codes returned by the precheck were ignored.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
on a background thread and show a spinner while this process is going on. Also,
removed certain duplicate controls and made some minor layout changes (margins,
sizes, column widths).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
on a background thread and show a spinner while this is going on. Also: run this
check only the first time the page is loaded; some refactoring, namely simplified
the code scanning for SRs by reducing the number of things each method does;
fixed column widths; removed unused property.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Due to the tooltip container introduced for the automatic radio button, winforms didn't treat these radio buttons properly - we needed code to make them mutually exclusive, tab didn't behave properly and keyboard arrow navigation between them didn't work. Therefore I have removed the tooltip container (so our radio buttons behave properly without any extra work) and we instead use a winforms tooltip shown when the mouse is over the automatic radio button. Note that since the control is disabled when we want a tooltip, neither hover events nor attaching a winforms tooltip in the usual way will work. Therefore I use a mousemove event on the table, which displays the tooltip if and only if we are over the disabled control. Also adjusted the tab indexes to make sure tab works correctly across the whole page.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
The resume on server uses the CrossPoolMigrateCommand to implement the migration of the VM to the desired host. Before this change that command had no support for resuming a VM after migrating it, so the VM was not resumed. With this change, the CrossPoolMigrateWizard can take an optional (default false) parameter to restart the VM after migration. When this is true, the migrate action becomes a MultipleAction, first migrating and then restarting the VM.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
Also changed the page to use different resource strings for the Storage type in the right hand panel (no hotkeys should be shown there)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Instead of using VCPUs_max, use VCPUs_at_startup, which is the value set when we change the VCPUs count on the VM. Note that despite its name we don't need to restart to see this value change.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
I've looked at how this was implemented in Dundee, and there we used an absolute height on the row containing the manual checkbox. I've done the same here, changing row 3 from autosize to absoliute 47px. I've also removed the empty row that was between the two radio buttons. This is a Winforms problem, without workarounds an autosize radio button in an autosize container (say the table row) will report its height as one row of text, no matter whether it needs more. This seems to be the only place we use a long radio label (as opposed to a separate label underneath the radio), so I doubt it's worth doing anything more complex than this. I've tested it with the CN string used in the ticket, and it uses less space than the English translation. The string also hasn't changed from Dundee.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
