This required refactoring the OVF.AddVirtualSystem() method to accept the
system ID as a parameter. Also, removed some unused methods that were
calling OVF.AddVirtualSystem().
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-34231: Replace negative language with `block list` in code and references
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `stop` in code and references
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `freezing` in code
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run/ran` in code comments
Some paramater mentions have been renamed, as they will be renamed in future commits.
Excluded mentions in XenAPI/Host.cs and XenAPI/VM.cs since code is autogenerated.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# CFUValidator/CommandLineOptions/CFUCommandLineOptionManager.cs
# XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
# XenAdmin/Dialogs/Wlb/WorkloadReports.cs
* CA-34231: Replace negative language with `run` in Command.cs Run method
Used Resharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/TabPages/GeneralTabPage.cs
* CA-34231: Replace negative language with `run` in Command.cs CanRun method
Used Resharper rename utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs CanRunCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/DRConfigureCommand.cs
# XenAdmin/Commands/DRDryrunCommand.cs
# XenAdmin/Commands/DRFailbackCommand.cs
# XenAdmin/Commands/DRFailoverCommand.cs
# XenAdmin/Commands/DisasterRecoveryCommand.cs
# XenAdmin/Commands/VMGroupCommand.cs
* CA-34231: Replace negative language with `run` in Command.cs RunCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs GetCantExecuteReasonCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs GetCantRunReasons method
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in Command.cs
Also applied to related symbols. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in methods named CanRun
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in methods in CrossPoolMigrateCommand.cs
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/CrossPoolMigrateCommand.cs
* CA-34231: Replace negative language with `run` in remaining Run methods
Also updated negative language in `DeleteVMCommand`
Also updated in comment in `CrossPoolMigrateCommand`
Also renamed missed instances of `CanRun`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in `CanRunCore` and `RunCore`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in Commands folder
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in XenAdmin/Controls folder
Used ReSharper renaming utility. Had to rename `WlbReportView.xs:RunReport()` to `WlbReportView.xs:StartRunReport()` to resolve conflict with change from `WlbReportView:ExecuteReport()` to `WlbReportView:RunReport()`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
# XenAdmin/Dialogs/Wlb/WorkloadReports.cs
# XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs
* CA-34231: Replace all remaining negative language with `run` in code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/Controls/WlbRecommendations.cs
# XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs
# XenModel/WLB/WlbScheduledTask.cs
* CA-34231: Replace negative language with `supporter` or `bond member` in code strings
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `supporter` or `bond member` in Messages string
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/MainWindow.cs
# XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace remaining negative language with `supporter` in .resx files
Used ReSharper renaming utility. FriendlyErrorNames.resx has been excluded.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `supporter` or `bond member` in XenAdmin code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace negative language with `supporter` or `bond member` in XenModel code
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in CFUValidator code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# CFUValidator/CFUValidator.cs
* CA-34231: Replace negative language with `coordinator` in solution's comments and hardcoded strings
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `Helpers:GetCoordinator` method
Used ReSharper renaming utility.
also renamed similarly named method in `ObjectChange.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Alerts/Types/HotfixEligibilityAlert.cs
# XenAdmin/Controls/CustomDataGraph/ArchiveMaintainer.cs
* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`
Used ReSharper renaming utility. Excluded jp and zh resources
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/EvacuateHostDialog.resx
* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`
Used ReSharper renaming utility. Excluded jp and zh resource files.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.resx
* CA-34231: Rename missing language references for change to `coordinator`
Misc files were not saved before last commits.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `Messages.resx`'s code
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/HACommand.cs
# XenAdmin/TabPages/AdPage.cs
# XenModel/Actions/Network/CreateBondAction.cs
# XenModel/Actions/Network/NetworkAction.cs
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace negative language with `coordinator` in `ExternalPluginAction.cs`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`
Used ReSharper renaming utility. Also replace negative language in missed comment in `ExternalPluginAction.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/AddHostToPoolCommand.cs
# XenAdmin/Commands/HACommand.cs
* CA-34231: Replace negative language with `coordinator` in `Helpers.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `NetworkingHelper.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `PoolJoinRules.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`, `Controls`, and `Core`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/AddHostToPoolCommand.cs
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Diagnostics`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Dialogs`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenAdmin`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/MainWindow.cs
# XenAdmin/TabPages/GeneralTabPage.cs
# XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeExtrasPage.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizard.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizardPrecheckPage.cs
# XenAdmin/XenSearch/Columns.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenModel\Actions`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenModel/Actions/Network/CreateBondAction.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenModel`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative strings with `main` in `Messages.resx`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace remaining negative string names with `main` in `Messages.resx`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs
# XenModel/Messages.resx
* CA-34231: Rename dialogs to replace negative connotations with `main`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `SaveAndResoreOptionsPage.cs`
Also updated its resx file. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs
* CA-34231: Fix invalid reference in `SaveAndRestoreOptionsPage.Designer.cs` after renaming
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `EnterMainPasswordDialog.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `ChangeMainPasswordDialog.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Fix invalid reference not changed after renaming `EnterMainPasswordDialog.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `main` in `XenAdmin/Dialogs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Update class names in HelpManager.resx
Following renaming of main password dialog. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `Metadata.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Remove remaning negative language with `coordinator` from `Messages.resx`
Used ReSharper renaming
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Remove remaning negative language with `other pool member` from `Messages.resx`
Used ReSharper
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language in solution
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Remove commented out code in VNCGraphicsClient.cs
Code has only been improved partially as it's not strictly relevant to the PR
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend negative word replacement in XSVNCScreen.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Simplify debug call formatting in NewPoolDialog.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Add code mistakenly removed in MainWindow.cs
Removed as part of `f155f9c8`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Revert renaming of constant related to Windows' API
Considered external to CH Center
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend hotkey for Coordinator field in `NewPoolDialog`
Previous ALT+<key> hotkey was conflicting with CreatePool
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Remove unecessary whitespace in EvacuateHostDialog.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Update if block to exclude unecessary else in DRFailoverWizard.cs
Not relevant to the PR, but the change is small enought to no need extra testing
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend typo in PoolJoinRules.cs
supporer -> supporter
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace missing negative language with `coordinator` in `XenAPI-Extensions/Pool.cs`
Variables and methods XenAPI-Extensions were mistakenly skipped
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace negative language in `XenApi-Extensions` with `coordinator/interface`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace negative language in `XenApi-Extensions` with `supporter/member`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace remaining negative language in `XenServerHealthCheckBugTool.cs`
This is only used to format the string
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Change line-endings to CRLF in `Page_CloudConfigParamters.cs`
Done in order to fix merge conflict into master
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend misc negative language renaming typos
`XenServerHealthCheckBugTool` and `XenServerHealthCheckService`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
- with this change the user won't see the misleading "Moving VM to new storage" in History if they tried to move the VM inside the pool, but actually didn't select different SRs for the VM's disks.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- if a VM can migrate inside a pool, then we will allow it in the wizard, even if storage migration is not allowed
- If it is a intra-pool migration (without moving the disks), then use the VM migrate action (which does a VM.pool_migrate), not the cross pool migrate action.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
prevent them from being serialised alongside the API properties. This will also
be useful for moving the API bindings out of XenModel.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
The resume on server uses the CrossPoolMigrateCommand to implement the migration of the VM to the desired host. Before this change that command had no support for resuming a VM after migrating it, so the VM was not resumed. With this change, the CrossPoolMigrateWizard can take an optional (default false) parameter to restart the VM after migration. When this is true, the migrate action becomes a MultipleAction, first migrating and then restarting the VM.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
Mostly just terminology changes from home server to target server in the CPM wizard. Changes in shared component SelectMultipleVMDestinationPage (shared with ImportWizard) to allow CPM wizard to rename the Home Server column (as it can the VM/template one - using the same pattern).
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
Copy VM or Copy Templates wizard will point to the same help: "Copying VMs and Templates"
Migrate and Move VM will show: "Migrate Virtual Machines"
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- changes to the text to be suitable for migrate and copy operations, where possible
- added different text for copy on some pages
- also different text for single and multiple selection
- changes to text alignment, tab order, hotkeys on the copy pages
- removed Finish page from the intra-pool copy wizard
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added some null checks
- in the Cross pool migrate wizard, add Transfer network page for all cases except intra-pool move (which is performed via VMMoveAction)
- added comments to VMCrossPoolMigrateAction constructor to make it cleared what the copy parameter means
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- modified CopyTemplateCommand to launch a cross pool copy if permitted
- added CrossPoolCopyTemplateCommand which opens the Cross pool migration wizard in "copy" mode
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added a "copy mode" page to the Cross pool migrate wizard (when in copy mode) where the user can select intra-pool or cross-pool copy
- If intra-pool option is selected, then the wizard will display a page similar to what we currently have in the Copy VM dialog
- If cross-pool option is selected, then the wizard will display all the cross pool migration pages
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- modified the VMCopyCommand to launch a cross pool copy if permitted
- added the CrossPoolCopyVMCommand which opens the Cross pool migration wizard in "copy" mode
- modified the cross pool migrate action with an extra "copy" parameter, which will add a copy option to the vm.migrate_send function call
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changes following code review:
- add static methods to the cross pool migrate and move commands to determine if the command can execute
- In the Cross Pool migrate wizard: add Transfer network page for cross-pool move (and copy) operation (as well as all migrate cases)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- With these changes, a stopped or suspended VM can be moved across pools; this is performed as a vm migrate operation.
- The intra pool move will continue to be a vdi.copy + destroy operation for stopped VMs, but for suspended VMs we need to do it a as vm migrate operation.
- We use the Cross Pool migrate wizard for both intra and cross pool move operations, but introduced a wizard mode parameter in order to adapt the wizard to the specific operation we want to perform (migrate, move or copy)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- before leaving each page of the wizard, check if all selected VMs are still available for migration
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
