on the VM Snapshots page; update VM's status on the Snapshots page when the
VM's membership in a policy changes.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Merged the PolicyHistory control into the dialog; removed legacy column from
the policies datagridview; put retrieval of messages on a background thread
to avoid UI freezing if there is a huge number of messages; retrieve messages
only when the VMSS collection changes and not every time the run history grid
is repopulated; sorted out button enabled state.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
prevent them from being serialised alongside the API properties. This will also
be useful for moving the API bindings out of XenModel.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Add the toggle to enable/disable IGMP snooping.
Display the property if the pool is licensed
and the network backend is OVS.
Signed-off-by: Hui Zhang <hui.zhang@citrix.com>
* CA-249823 - Accept zip files in Updates Wizard
* CA-258326 - Improve implementation of CA-248823(Accept zip files in Updates Wizard)
* Small unrelated bugfix: Stop selectFromDiskRadioButton being checked when
restoring dismissed updates.
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
- Added more items to the metadata; the content is now slightly different between the SSR produced in XenCenter and the one from the HealthCheck;
- Encode the metadata string before sending it to the Health Check;
- Always suppress history for the action that sends the proxy settings;
- Renamed some of the new classes;
- Also refactored the actions that send data to the HealthCheck service.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changed the text (on the checkbox) to make it clear that, after a version upgrade, XenCenter will apply updates only on licensed pools. This way it should be clear that servers of a partially licensed pool will not be updated. (The previous text suggested that any licensed server would be updated in general.)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
This commit changes the dropdown control to not only show the available
positions, but also mark the ones that are already being used.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Network HB initially shown as error because it takes time for the status to be
read from xha by xapi. This adds a delay to allow the status to be updated
before XC displays it.
Changed the pre-check error message to refer to the absence of the Tools
when that is suspected to be the case.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CA-205187 - L10n: JA/SC: The websites are not shown as hyperlink on the “Health Check Privacy Statement” window
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
* CA-205187 - L10n: JA/SC: The websites are not shown as hyperlink
Fixed tab order
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
* CA-205187 - L10n: JA/SC: The websites are not shown as hyperlink
Added Japanese privacy policy
* CA-205187 - L10n: JA/SC: The websites are not shown as hyperlink
Fixed regression in tab order
Detect both VM_LACKS_FEATURE and VM_LACKS_FEATURE_SUSPEND, show proper error message on the pre-check page in the Install Updates Wizard
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
1. Added pool.management_reconfigure to RBAC check
2. Time out is enhanced to check host.IsLive metric()
3. Assert for down management and null check for new management is added
4. Updated comments in the code as suggested by Mihaela Stoica
Signed-Off-By: Sharath Babu <sharath.babu@citrix.com>
- On the Updates tab: for new versions, check that the version of XenCenter is at least the latest. If not, give an additional option to download a newer XenCenter (for both updates and upgrades), and not offer "Download and Install" (for updates).
- In the Patching wizard: if the update is a new version, we force the user to first update their XenCenter to the new version
- In the RPU wizard: if the server version is not the latest and their XenCenter version is not the latest from updates.xml, we assume that they want to upgrade to the latest XenServer version and we force the user to first update their XenCenter to the latest version.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
This way XC will display the name attribute of the XC-version which is expected to contain the LTSR string for LTSR version.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Also changed ApplyPatchAction and ApplyUpdateAction to install a single update to a single host, so that the appropriate action title can be displayed if an action fails. And replaced 2 hardcoded strings with resource strings.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Disabled the ability to select unreachable hosts and in addition
added a try/catch block to hide error message resulting from trying
to clean up an unreachable host.
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
have the wizard do it before we get there. Also, replaced the labels in such way
that, if there should be lag, the user will not see the draft message used only
on the designer.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- On the PVS Cache Configuration dialog, disable the cache storage fields with an information tooltip stating that this PVS cache storage cannot be changed because it is in use.
- Also set the minimum width for the splitter panels, to avoid display issues when the splitter is moved and either of the panels becomes unusable.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
confirmations are displayed. Added checkboxes to the dialogs requesting confirmation
of dismissal of notifications so the user can opt to skip this step.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Changes as discussed on the ticket: No longer disable the rows when they have a warning in the dialog, support warning about storage configuration as well as PVS configuration, and also include these warnings in the PVS page table.
Also changed the page to use different resource strings for the Storage type in the right hand panel (no hotkeys should be shown there)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- show a different message when deleting a Cache Configuration (a PVS_site object) that is actively in use by a PVS site
- some more text changes on the "Configure PVS Cache" dialog
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
On the General tab XenCenter shows a list of updates that requires the host to be restarted. This is shown for applied updates for which the required guidance hasn't been done (eg. restartHost or restartAgent after-apply-guidances)
This commit fixes a regression that caused restartToolstack warnings to be not shown in the list of warnings.
The displayed messages are also improved, XenCenter will show Toolstack restart or host restart appropriately and not just restart only as it used to.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- added a new precheck, called "Live patching status" which checks is a reboot is needed for each host. If reboot is needed, the check will display a warning, otherwise it will show a green tickbox, saying that the server does not need to be rebooted, and if live patching is used, this information will be included as well.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Renamed Add/Remove PVS Site buttons
- Added a note on the PVS Cache configuration page, regarding the recommended cache size and the allowed size for "memory only"
- Added a warning about the Site configuration not being complete until the PVS part is done as well (only visible if PVS_uuid is not set for a PVS_site)
- Added PVS Read Caching status on the VM's general tab
- The absolute maximum allowed for a cache size is 2TB
- Changed the rubric on the Enable PVS read caching dialog
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- check the current number of vCPUs (by getting the latest value from the cache) before trying to change it.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- If the PVS site cannot be removed (it has running proxies) then popup a dialog stating the reason, instead of starting the action and failing there. We still have the same check in the action, just in case the situation changed in the meantime.
- Removed unused controls
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
PVS Tab:
- Move the "View PVS sites" button inside the "Configure PVS Cache" dialog (next to Remove button) and make it per-site (showing only the PVS servers from that site)
- Remove "Currently attached" column from the VMs section
- Rename "Status" column to "Read caching status"
Configure PVS Cache" dialog:
- Make sure there is a scrollbar to accommodate all hosts in a pool
- Add a confirmation dialog when a site is removed. The action is executed when the Remove button is pressed.
- When Memory SR is selected, set the maximum value to the dom0-extra-memory..
- Allow empty configuration (but see next point): The OK button should only be disabled if the PVS site name is empty
- Add an extra option in the "Cache storage" combobox, with text "Not configured", selected by default on a new site. When this is selected, we will remove the existing entry in pvs_cache_storage and will not create a new one.
- When a PVS site is deleted (forgotten), we first delete all the associated PVS_servers, otherwise the site cannot be deleted.
