- The license restriction for vss snapshots already exists in trunk. This commit just amends the message displayed when the feature is not available.
Cherry picked from cream-indigo:
CA-190395: Replace the usage of FEATURE_NOT_AVAILABLE_NEED_ENTERPRISE_OR_PLATINUM_PLURAL
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
- changed the licenseStatus_ItemUpdated event handler to invoke on the main thread, as this is the only case when a background thread needs to update the storedRows list..All the other reads and writes are taken place on the main (UI) thread
- removed the storedRowsLock as it is not needed since we do all the updates to storedRows on one thread.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
1. Check the Xenserver platform version and display the host disk read/write
threshold and metric weighting for Dundee or later XenServer.
2. Update the metric weighting page to make it autosize-able.
Signed-off-by: Hui Zhang <hui.zhang@citrix.com>
Revert "Merge pull request #708 from GaborApatiNagy/master_windows_update"
This reverts commit fe03f1382f, reversing
changes made to 423065a2c8.
Conflicts:
XenAdminTests/TabsAndMenus/MainMenuGeorge.cs
- removed the call that assigns vif.VM property, as this property is already assigned in ToProxy()
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Add Trim() to the instances where we check if the username is null or empty and also where we use it for authentication
- This applies to both XenServer username and Citrix username
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Fixed the checkbox logic - selected state is now preserved on search or update/refresh. All rows (that can be selected) are selected by default.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Fixed when to enable the Command, the screen uses the connection (works for standalone hosts)
Using CollectionChanged instead of BatchCollectionChanged
Removed unnecessary Invoke
Removed values from the VmUpgradeState enum
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Implementing Upgrading VMs to Windows Update
New screen features:
-Create skeleton of the Upgrade VM dialog
-Implement a Go To Console link (just a link that opens a vm console)
-Implement logic to show the right status for a VM (includes rules to
get the states). Includes updating the dialog whenever the status changes.
-Add status texts to Messages, proper text on the UI
-Add stub methods to VM class in XenAPI-Extensions to r/w states from
Guest Agent
-UI: Implement rules what vms to display, checkbox rules, read only vms,
and when to enable the Upgrade button
-Implement Upgrade button (writes state for GA, mounts ISO) + maximum
parallel executions/actions
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Button enabled only when "New XS credentials" radio button is ticked and username and password textboxes are not empty
- Button and the textboxes are disabled while the test is in progress
- When test credentials fails, log userName, not UserDisplayName
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- renamed srSpace and srInitialSpace variables
- removed unnecessary checks for thin provisioned sr
- fixed some error on NewDiskDialog.SMConfig property (smconfig was wrongly populated based on controls enablement; the conversion to long was made before converting to bytes
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Moving GetVirtualisationWarningMessages back to VM
Also added EVACUATE_HOST_INSTALL_MGMNT_PROMPT what is shown on the EvacuateHostDialog when a 'new' VM is given and Management Agent can be installed
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- when the user changes the disk size (or initial allocation), the selection in the SR list should not change and the list should not be automatically resorted
- users should not be allowed to create disks larger than the SR size (the SR is disabled and an explicit reason is displayed)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
When creating a new VM, we no longer use vm.provision to create VM's disks, but instead we create the disks ourselves using vdi.create; this way we can specify the initial and incremental allocations for the new disks.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Removed PV_DRIVERS_NOT_INSTALLED=0 from the VirtualisationStatus [Flags]enum - 0 will mean the same (to avoid bugs with enum.HasFlag(0) is always true)
Extracted common code to VMLifeCycleCommand.GetCantExecuteNoToolsOrDriversReasonCore() method (instead of defining overridden GetCantExecuteReasonCore() method at this level, because not all child classes need this...)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Removed Optimized state and using I/O & Management instead (even for old VMs)
Changed messages to be different for old and new VMs instead of saying Tools or I/O drivers for instance
Removed the extra enum property from the VM class that had been added for search
Fixed code in GroupingTypes class (possible KeyNotFoundException)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Extended the enum, aimed for minimal changes, also using Flags on the enum now
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- If an upload is marked as failed, then display it in the UI (but only as long as there is no successful upload done after that)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changed all the health check actions to perform the necessary role checks
- HealthCheckAuthenticationAction: changed so it does not save the tokens, so no role checks required in this action (all the checks are performed in SaveHealthCheckSettingsAction)
- GetHealthCheckAnalysisActions: added role checks
On the Health Check Overview dialog, a pool is displayed as read-only if connected as a user with roles that don't permit changing the health check settings:
- the following actions are not available: enroll, edit settings, disable health check, request upload, get analysis result
Adds tab indexing to the control for allocation and changes label names.
Corrects mistake that led to exception being thrown when the Disk Size is decreased in the the New Disk Dialog.
Created ThinProvisioningParametersControl user control using existing code to have the thin provisioning settings at one place. It needs to be initialized by providing an SR and it will expose its internal state via NewSMConfig property that we need at other places.
This does not include refactoring of existing code or replacing existing code to use this new control, but the new Conversion dialog is using this. Next step would be to remove existing code and start using this new ThinProvisioningParametersControl instead.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- no “the” is needed in front of “Citrix Insight Services” (e.g. “…authenticate with Citrix Insight Services…” and not “…authenticate with the Citrix Insight Services…”)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Memory Tab uses GB units for values greater or equal to 1 GB, otherwise show in MB;
- Search Tab displays values in GB or MB in the same as the Memory Tab (e.g. 512 MB of 1 GB, 256 MB of 512 MB, 2.5 GB of 16 GB).
- The shiny bar present in the Memory Tab and in Memory Settings dialog shows the scaling in the following way: If smaller than 1 GB, then show as before, else show only labels with values multiples of half a GB.
- The units used in Memory Setting Dialog are set depending on the static_max. If it is greater or equal to 1 GB, then the units are GB, else MB. The user does not have the possibility of changing them.
- Add code to check license before offering quiescing on the VM Snapshot dialog
- If the feature is not available, the message displayed is: "This feature is disabled due to license restrictions on the server."
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- removed tooltip fro the "show again" checkbox and changed the chackbox text to say "Show this dialog..."
- fixed spacing in the right hand panel
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Thick provisioning - > Fully provisioned
- Subsequent allocations -> Incremental allocations
Also, updated the Next button on the Location page of HBA SR, to say "Next" for Dundee or greater and "Create" for pre-Dundee pools.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added CallHomeSettings.TryParseStringToDateTime() function, which does not throw an exception if the conversion fails
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added new fields to the Health Check Settings dialog (XenServer credentials)
- these credentials are saved as xapi secrets, and on un-enroll they are being removed
- removed the Authenticate button; the authentication is now done on pressing the OK button
- the Health Check Settings dialog is displayed on "Enroll now" and "Edit Health Check settings"
- display the "Last Successful Upload" on the Health Check Overview dialog
- use uniform format when converting time to string and string to time
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
1. Using en-us to transfer upload request time
2. Check the pipe is closed before close it.
3. On demand upload will not have 24 hour due problem since it only check once in half an hour
4. Avoid get upload token by empty session.
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
- When "Request upload now" is clicked, instead of disabling it, change the link to an unclickable text saying "Upload requested at....".
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Add VDI page, Initial Allocation Size field: To override default to
default value behaviour it is no longer enough to enter this field - at
least a change has to be made to it's value.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Add New Virtual Page (VDI):
By default, the SR's default initial size allocation percentage (that may be different for different SRs) is used.
Once the user has changed the initial allocation rate, the page would only use the custom value from that point.
New SR Wizard:
Minimal change in if statement and added comment in RunNextPagePrecheck
method for LvmoHba.
-Changed code, because API needs 0-100 percent values as 0..1
-Code for HBA SRs
-Changed free space check for new VDIs to condider initial disk size only
when the SR is thin provisioned
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Check call home enrollment status on connecting to a pool: If status is unknown it means that the pool is not enrolled (enabled) and has never been (disabled). If that's the case, then show the Health Check Overview dialog with the pool selected
- "Enroll now" on Health Check Overview will try enroll the selected pool into call home using existing token authentication. If this is not possible, then a dialog will be presented for the user to perform the initial authentication.
Using ShowDialog() instead of Show()
Also removed unnecessary code that displayed the popup again
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Passing suppressHistory=false in the MultipleAction's constructor (so no action item will be displayed in the Event view for the MultipleAction itself)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
We observed that some threads can reach deadlock-ish state after they have Invoked into a control's UI thread. When it happens they are all in a waiting for join or in sleep state for very long time, although there should not be any deadlock situations.
It seems this has something to do with multiple parent controls and with which control we invoked on. This should not make a difference, because we have got one UI thread (for MainWindow) they should wait for, but we have seen it does.
The solution that fixed this issue was to invoke on the MainWindow instead of various controls (see a4fe507adf ).
This changeset is changing all our Invokes to invoke into MainWindow
instead of a control itself. (MainWindow's UI thread is the only UI thread
all Control is using in XenCenter)
This changeset should be in place until we have found the root cause or the exact reason for the above.
- With these changes, a stopped or suspended VM can be moved across pools; this is performed as a vm migrate operation.
- The intra pool move will continue to be a vdi.copy + destroy operation for stopped VMs, but for suspended VMs we need to do it a as vm migrate operation.
- We use the Cross Pool migrate wizard for both intra and cross pool move operations, but introduced a wizard mode parameter in order to adapt the wizard to the specific operation we want to perform (migrate, move or copy)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added a "Integrated GPU passthrough" section to the PoolGpuEdit page.
- This section is only visible for a host that has GPU capability and the enabling/disabling of integrated GPU passthrough is not restricted.
- With this addition, the GPU page can now be displayed for a pooled host as well (previously only pool or standalone host)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- this applies to the Cloud-config page on the New VM Wizard and VM properties dialog.
- same for the container enlightenment page on the VM properties dialog.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- The cloud config parameters page is only visible on a VM that already has a config drive.
- The cloud config parameters can only be changed when the VM is halted.
- In the New VM wizard, if a template is selected that already has a config drive, them the wizard will display the existing configuration, not the default one.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
New Page: Enlightenment on VM Properties Dialog, visible only for:
- VMs on Cream Or Greater hosts
- that can be enlightened, regardless of their power state
A VM can be enlightened if the key "xscontainer-monitor" exists in other_config.
A VM is enlightened if other_config:xscontainer-monitor if true.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
