Network HB initially shown as error because it takes time for the status to be
read from xha by xapi. This adds a delay to allow the status to be updated
before XC displays it.
- Moved the top warning out of the filter toolstrip and into the same tableLayoutPanel
as the dataGridVew to avoid hardcoding the dataGridview location in the code.
- Corrected linkLabel colour for compliance. Changed icon to match the icon
of the bottom information label.
- When checking for updates disable the linklabel instead of hiding the whole
warning to avoid empty space or the dataGridView jumping up and down.
- The check button in the middle should be available when the check link is
available.
- Avoid toggling explicitly the enabled state of controls; it can be taken
care of within the check for updates event handlers.
- Other minor layout improvements (control positioning).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
thus solving the resizing issue of the Actions column. Also, register an action
before starting running it.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
General tab (Pool): In the list of updates, added a space after each comma
to let the control wrap the text into multiple lines. This way the text is
no longer cut, therefore no additional scrollbar is needed.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Changed the pre-check error message to refer to the absence of the Tools
when that is suspected to be the case.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- This is needed because this class is shared with the VNCControl solution which doesn't have access to the Helpers class
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
A bit of refactoring as requested by the reviewers
I decided not remove the NullReferenceExceptions and throw the Failures
immediately in order to avoid the additional error handling that seems to be unnecessary there. However, the reason I've decided to keep it as is is that it would change what gets logged and the performance gain would not be noticeable anyway. Furthermore, the current implementation (try-catchall) catches any other exceptions providing fallback to the default Failure.
Due to a regression (introduced by [1]), XenCenter will not run delayed actions in the correct host-order at all times. This can cause the master to be not the first host to be rebooted what may result in connections being lost to slaves should the API change between restarts/updates in a way that it would not be compatible to the previous version. This would make the wizard fail and users would have to restart their master host manually to make it connect to its slaves again.
This commit fixes the order of the hosts when executing the delayed actions.
[1]: 15827512e1
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- removed unused methods and properties from the NewPolicyWizard class
- made the wizard pages private in the NewPolicyWizard class
- removed unused constructor from the NewPolicySnapshotTypePage class
- removed unused property from the PolicyHistory class
- removed the public properties TreeView and DataGridView from the SnapshotsPage
- removed the PolicyType from the PolicyAlert class and the constructor that is no longer used
- removed unused property from the VMSS class
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-205187 - L10n: JA/SC: The websites are not shown as hyperlink on the “Health Check Privacy Statement” window
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
* CA-205187 - L10n: JA/SC: The websites are not shown as hyperlink
Fixed tab order
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
* CA-205187 - L10n: JA/SC: The websites are not shown as hyperlink
Added Japanese privacy policy
* CA-205187 - L10n: JA/SC: The websites are not shown as hyperlink
Fixed regression in tab order
Detect both VM_LACKS_FEATURE and VM_LACKS_FEATURE_SUSPEND, show proper error message on the pre-check page in the Install Updates Wizard
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CA-249849 - Using arrows to select license in license manager are the wrong way
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
* CA-249849 - Using arrows to select license in license manager are the wrong way round
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
* CA-249849 - Using arrows to select license in license manager
Reverted tab order for radiobutton groupbox as per review comments
In rare cases, the GetMaster could return null, causing the update progress to fail with "Pool_patch or Pool_update not found". (when the Cache hasn't been populated by the execution gets here)
This commit drops GetMaster and uses a pre-saved masterUuid instead of waiting for the Cache what would be the other way to solve this issue.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Moved "Legacy Windows" template to the bottom of the Windows templates
to discourage users from selecting it and avoid it being selected by default
at the top of the list as was the case.
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
Reset the PrecheckPage.PoolUpdate property on leaving the SelectPatch page, because it needs to be null for the Automated Updates mode and for the single update mode it will be updated on leaving the Upload page.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Perform all the prechecks on applicable hosts only (i.e. the hosts that don't have the update applied already), with the following exceptions:
- The HA check, which is performed on the pool master
- The server-side precheck (PatchPrecheckCheck) which will still be performed on all servers in the pool and will show the warning if the update has already been applied on some servers
This commit also adds an override to the HAOffCheck.SuccessfulCheckDescription to show the pool name instead of the master's if the check is successful.
Also, in the PatchPrecheckCheck, I had moved the code that checks if the patch is already applied to the very beginning (before the host liveness check), so it will return the warning that the server will be skipped even if the server is not reachable
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
QEMU EXT_KEY_EVENT expects key symbol and key scan code to
be sent. This commit extends KeyEvent to supply translated key symbol,
as well as scan code.
Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
* CA-249056: Add a unique ID to XenCenter Check For Update
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CA-249056: Add a unique ID to XenCenter Check For Update
Fixed the format of the User-Agent to comply with [1].
[1] https://tools.ietf.org/html/rfc7231#section-5.5.3
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CA-249056: Add a unique ID to XenCenter Check For Update
Changes following the code review
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CA-249056: Add a unique ID to XenCenter Check For Update
Changes following the code review
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CA-249056: Add a unique ID to XenCenter Check For Update
Changes following the code review
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Also ensuring that if the UpdateSessionDisplaySettings function (which we use for resize) is not supported, then we display the console centered in the parent window and with scrollbars if needed
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- set managed=true, otherwise the network creation fails with the error "The network is not managed by xapi"
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Also rearranged some code in PatchingWizard class, to keep all property assignments together for each wizard page
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Introduced the WizardMode enum and the WizardMode properties in several wizard pages (replacing the IsInAutomatedUpdates boolean property)
When in NewVersion mode, we show the same wizard pages as the AutomatedUpdates mode and we build the update sequence based on the selected update alert (which is an update to a new version)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
First step, this can return an upgrade sequence that will upgrade a pool to a version and will bring that version up-to-date right away. Untested skeleton yet.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
In the Updates wizard:
New versions that are available as updates will be listed in the "Download Updates from Citrix" section, before any other updates.
If XenCenter is not the latest version, these rows will be greyed out, with a tooltip.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
CP-21185: Show new versions of XS and XC on the top
...unless not sorted by name, date, or servers.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- On the Updates tab: for new versions, check that the version of XenCenter is at least the latest. If not, give an additional option to download a newer XenCenter (for both updates and upgrades), and not offer "Download and Install" (for updates).
- In the Patching wizard: if the update is a new version, we force the user to first update their XenCenter to the new version
- In the RPU wizard: if the server version is not the latest and their XenCenter version is not the latest from updates.xml, we assume that they want to upgrade to the latest XenServer version and we force the user to first update their XenCenter to the latest version.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
If a patch updates the server version, then save a reference to that version in the alert and display this alert as a "new version" alert
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Suppress updates to the status when the PureAsyncAction runs the action to populate the ApiMethodsToRoleCheck
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
When a TargetInvocationException is raised, its InnerException property holds the underlying exception, which is what we should display.
Also ellipsise the action description (which could be an error thrown by the upload action) that is displayed on the Upload page.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Try to match the alerts by message type, not by title, because for pooled hosts the title contains the host name followed by the friendly name, while for standalone hosts the host name is not included
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
This way XC will display the name attribute of the XC-version which is expected to contain the LTSR string for LTSR version.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- save multiple dismissed alerts as a comma-separated list in Settings.Default.LatestXenCenterSeen
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Add "latestcr" field to the XenCenterVersion class
- Change the Updates class to cope with multiple latest XenCenter versions
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Added "Changes will apply to all hosts in a pool." to clarify the scope of these settings
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
In addition to adding scrollbars when content panel size is reduced using splitter,
I also fixed the teal top panel issue from the base class so that it is applied to all
VerticallyTabbedDialog implementations.
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
In addition to ticket requirements, the console size is updated when the console is:
- resized in undocked mode
- resized manually by dragging window edges
- resized by dragging the panel splitter
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
This commit fixes a bug in the Update Wizard that causes XenCenter to not restart Toolstack when it should in the following case: in Automated Mode, when the update sequence for a host has an update that contains live-patch with restartHost guidance (and guidance-mandatory=false) followed by an update with Toolstack restart guidance.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
XenCenter uses the wrong token (upload token instead of the diagnostic token) when the "Request an additional update" option is used
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The ProxyAuthenticationEnabled registry key is no longer needed since
CAR-2214 is now in its own branch.
Signed-off-by: Frederico Mazzone <frederico.mazzone@citrix.com>
Fixed the bug that caused a disconnected host to appear as if it was still connected in the License Manager. After this commit, if a host get disconnected in the background its row will be disabled and will be unselectable.
(Note that when the connection resumes, the user will still have to click on a different row to have the disabled state (and the buttons) fixed, but that is a Won't fix bug (CA-115261) that I couldn't fix right now.)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Also changed ApplyPatchAction and ApplyUpdateAction to install a single update to a single host, so that the appropriate action title can be displayed if an action fails. And replaced 2 hardcoded strings with resource strings.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-236844: XenCenter throws "Assertion failed" error when toggling between the RDP and VNC consoles
Couldn't reproduce it, but it looks like the assertion is hit because the console view still holds a subscription to an event from an old vnc stream (maybe not garbage collected yet).
Added code to deregister event handlers when the vcnStream is disconnected and also replaced the the assertion with an if statement, ignoring the case that might have caused the assertion failure.
* CA-236844: XenCenter throws "Assertion failed" error when toggling between the RDP and VNC consoles
Added a Debug assert and a null check.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
After deleting the schedule vmss will be null for that message, hence
we need to handle this case.
Signed-Of-By: Sharath Babu <sharath.babu@citrix.com>
Implemented a generic mechanism to allow tab pages to unregister their event handlers when they are hidden (when a tab page gets deselected)
Also changed VMStoragePage to derive from BaseTabPage, so it could use the same mechanism.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Disabled the ability to select unreachable hosts and in addition
added a try/catch block to hide error message resulting from trying
to clean up an unreachable host.
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
[VMSS] XC -> right click 'VM' -> Assign VM to snapshot schedule shows all policies,
even though they are not supported by VM
Signed-Off-By: Sharath Babu <sharath.babu@citrix.com>
These lists were continuously growing on each refresh, because the Where
clauses returned all items as the predicate was always evaluated to
true. The reason is: A. Even IEquatable<XenServerPatch> is
implemented on XenServerPatch, it only compares uuids. B. XenServerVersion
(also XenCenterversion) does not implement Equals (always different as the
Action returns new objects).
The two bugs these caused are: A] forever growing list of versions causing
obsolete data to be kept while everything is added to the end of the list
additionally. B] Any previously added Patch will not be updated unless the uuid has been changed (this never changes).
Fix in this commit: On each refresh, taking the new lists as they are
(from the Action) and not trying to keep or modify existing items. GC will do the rest with the old list (and objects)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Added "VM.pool_migrate" to the list of tasks suitable for meddling actions.
Removed the usage of MeddlingActionTitle other_config key, because it wasn't working as intended for two reasons:
- If XenCenter starts an action that does multiple async api calls, so multiple tasks, the action's title is assigned to all tasks as MeddlingActionTitles, so the second XenCenter instance would create multiple meddling actions with the same title.
- When a second XenCenter instance tries to see if a task is suitable for a meddling action, the MeddlingActionTitle is not yet present in the task's other_config, so the task is ignored in most of the cases.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Further changes
* implemented similar logic for the Commands too as those are keep on getting updates so affected
* moved these static fields to a class (at Images)
* used the same casing as in Resources once they have been moved
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
This change does not apply to supplemental packs, as we should be able to install supp packs to individual hosts in a pool.
Also, if the wizard is installing an update from disk and we cannot match it in updates.xml, then we will continue to allow host selection, because we can't tell whether it is a supp pack or a hotfix.
Plus fixing the bug where the "Select All" button is enabled even when all the selectable servers/pools are selected
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changed code at a a few places where it made sense to limit how many times XenCenter asks the Resource Manager for a new instance(*1) of the same(*2) image.
*1: RM returns a new object each time
*2: they are the same as we don't change the locale of a thread and also we don't localise these images - by design
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Added a check for default_template as a workaround an issue where the allowed_operations of a default template _initially_ indicated that cross pool migration was allowed.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Replaced the information tooltip with a warning icon and label at the bottom of the page.
- Added some null checks
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
have the wizard do it before we get there. Also, replaced the labels in such way
that, if there should be lag, the user will not see the draft message used only
on the designer.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>