If pool any of the hosts in a pool hit the `HOST_NOT_ENOUGH_FREE_MEMORY` when calling `VM.assert_can_migrate`, XenCenter would prevent migration even if other hosts had enough memory to accommodate the VM.
Likely a result of the fact that other `VM.assert_can_migrate` failures are a consequence of pool-wide configurations. This is an exception.
Signed-off-by: Danilo Del Busso <danilo.delbusso@cloud.com>
* Tidy up `SelectMultipleVMDestinationPage.cs`
* CA-375532 & CA-336510: Add warning when importing VMs with too many vCPUs
* CA-375532 & CA-336510: Prevent users from starting appliance if a VM has too many vCPUs
* Tidy up `Page_CpuMem`: use expression-bodied properties
* Tidy up `Page_CpuMem`: use conventional naming scheme
* Tidy up `Page_CpuMem`: use explicit modifiers
* Tidy up `Page_CpuMem`: use `en-US` locale for names
* Tidy up `Page_CpuMem`: use `var` when possible
* Tidy up `Page_CpuMem`: rename `Vcpus` to `VCpus`
* Tidy up `Page_CpuMem`: reorder elements
* Tidy up `Page_CpuMem`: revert class renaming and fix `vCpus` typos
* CA-375532: Prevent users from starting VM if they select too many vCPUs
* Tidy up `Page_Finish`: use expression-bodied properties
* Tidy up `Page_Finish`: fix typo
* Tidy up `Page_CpuMem`: rename `CanStartVM` to `CanStartVm`
* Remove unnecessary using directives
* Anchor warning icon to the top-left corner of its parent
* CA-375532 & CA-336510: Warn users when selecting more vCPUs than pCPUs in the Properties page
* CP-41825: Add warning for imported VMs with > 32 vCPUs
* CP-41825: Add warning for new VMs with > 32 vCPUs
* CP-41825: Add warning for existing VMs when selecting > 32 vCPUs
* CP-41825: Update wording used to alert users running VMs with > 32vCPUs
* Remove unused local variable in `VappStartCommand.cs`
* Reword some vCPUs messages
* Simplify assignment of `CanStartImmediately` in `Page_Finish.cs`
* Simplify assignment of `CanStartVmsAutomatically` in `ImportFinishPage.cs`
* Remove useless `Count` check in `VappStartCommand`
* Rename `pictureBox1` to `warningPictureBox` and change its `SizeMode`
* Separate CPU and memory warnings in `Page_CpuMem`
* Shorten warning messages shown in `Page_CpuMem`
* Disable option to start VM when memory configuration isn't valid
* Report number of vCPUs and pCPUs when showing warning in New VM wizard
* Tidy up `CpuMemoryEditPage`: rename elements
* Tidy up `CpuMemoryEditPage`: use explicity modifiers
* Tidy up `CpuMemoryEditPage`: Rename `CPUMemoryEditPage` to `CpuMemoryEditPage`
* Tidy up `CpuMemoryEditPage`: Miscellaneous renames and improvements
* Tidy up `CpuMemoryEditPage`: Fix whitespace
* Tidy up `CpuMemoryEditPage`: Use ReSharper code formatter
* Tidy up `CpuMemoryEditPage`: Move events to own region
* Tidy up `CpuMemoryEditPage`: Move `IEditPage` members to own region
* Tidy up `CpuMemoryEditPage`: Order members outside of regions
* Replace topology and vCPU warning labels with structured warnings
* Ensure warnings ends with a dot
* Allow multiple CPU warnings to show at the same time
* Remove warning link for vCPUS > pCPUS Option is not achievable
* Enable option to force unit used in `MemorySpinner`
* Replace `NumericUpDown` with `MemorySpinner` and show warnings at bottom of control
* Check destination pCPUs count when destination is not a pool
* Do not disable option to start VMs after import if user selects a shared SR
* Add memory warning when importing appliance with too much memory
* Sort vCPUs and memory warning strings
* Remove target from `ImportWizard`'s summary
Target is not useful and can cause confusion as appliance VMs could start on non-target hosts
* The home server is needed in the summary when importing XVA. The target server is not needed in the summary when migrating a VM.
* Update warnings when the server selection changes. Corrected memory calculation.
* Show all warnings for vCPUs. Moved topology warning to the bottom. Separated methods for showing memory and vCPU warnings.
* Removed the memory setting from the VM Properties dialog. Split running VM info to a separate panel.
* Corrections to the logic for starting the VM automatically. Also, Fixed a bit the layout of the Finish page to make better use of the available space.
* Corrections as per code review.
Signed-off-by: Danilo Del Busso <danilo.delbusso@cloud.com>
Co-authored-by: Konstantina Chremmou <Konstantina.Chremmou@cloud.com>
Objective was to increase efficiency and better report the reason why migration
is not allowed. For this, WlbEnabledFilter and ResidentHostIsSameAsSelection
filters were merged into the CrossPoolMigrateFilter, and properties
FailureFound and Reason of the ReasoningFilter class were merged into method
FailureFound(out failureReason).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
This required refactoring the OVF.AddVirtualSystem() method to accept the
system ID as a parameter. Also, removed some unused methods that were
calling OVF.AddVirtualSystem().
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
CA-359124: Add VM snapshots VIFs to network mapping wizard page
This is not entirely necessary, since the mapping in the background is actually Network -> Network.
However, this is closer to the intent of the page.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
CA-359124: Tidy up methods in `VmCrossPoolMigrateACtion.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
Also, no need to use a different message for single and multiple VMs or templates.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-34231: Replace negative language with `block list` in code and references
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `stop` in code and references
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `freezing` in code
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run/ran` in code comments
Some paramater mentions have been renamed, as they will be renamed in future commits.
Excluded mentions in XenAPI/Host.cs and XenAPI/VM.cs since code is autogenerated.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# CFUValidator/CommandLineOptions/CFUCommandLineOptionManager.cs
# XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
# XenAdmin/Dialogs/Wlb/WorkloadReports.cs
* CA-34231: Replace negative language with `run` in Command.cs Run method
Used Resharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/TabPages/GeneralTabPage.cs
* CA-34231: Replace negative language with `run` in Command.cs CanRun method
Used Resharper rename utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs CanRunCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/DRConfigureCommand.cs
# XenAdmin/Commands/DRDryrunCommand.cs
# XenAdmin/Commands/DRFailbackCommand.cs
# XenAdmin/Commands/DRFailoverCommand.cs
# XenAdmin/Commands/DisasterRecoveryCommand.cs
# XenAdmin/Commands/VMGroupCommand.cs
* CA-34231: Replace negative language with `run` in Command.cs RunCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs GetCantExecuteReasonCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs GetCantRunReasons method
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in Command.cs
Also applied to related symbols. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in methods named CanRun
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in methods in CrossPoolMigrateCommand.cs
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/CrossPoolMigrateCommand.cs
* CA-34231: Replace negative language with `run` in remaining Run methods
Also updated negative language in `DeleteVMCommand`
Also updated in comment in `CrossPoolMigrateCommand`
Also renamed missed instances of `CanRun`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in `CanRunCore` and `RunCore`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in Commands folder
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in XenAdmin/Controls folder
Used ReSharper renaming utility. Had to rename `WlbReportView.xs:RunReport()` to `WlbReportView.xs:StartRunReport()` to resolve conflict with change from `WlbReportView:ExecuteReport()` to `WlbReportView:RunReport()`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
# XenAdmin/Dialogs/Wlb/WorkloadReports.cs
# XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs
* CA-34231: Replace all remaining negative language with `run` in code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/Controls/WlbRecommendations.cs
# XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs
# XenModel/WLB/WlbScheduledTask.cs
* CA-34231: Replace negative language with `supporter` or `bond member` in code strings
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `supporter` or `bond member` in Messages string
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/MainWindow.cs
# XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace remaining negative language with `supporter` in .resx files
Used ReSharper renaming utility. FriendlyErrorNames.resx has been excluded.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `supporter` or `bond member` in XenAdmin code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace negative language with `supporter` or `bond member` in XenModel code
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in CFUValidator code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# CFUValidator/CFUValidator.cs
* CA-34231: Replace negative language with `coordinator` in solution's comments and hardcoded strings
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `Helpers:GetCoordinator` method
Used ReSharper renaming utility.
also renamed similarly named method in `ObjectChange.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Alerts/Types/HotfixEligibilityAlert.cs
# XenAdmin/Controls/CustomDataGraph/ArchiveMaintainer.cs
* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`
Used ReSharper renaming utility. Excluded jp and zh resources
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/EvacuateHostDialog.resx
* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`
Used ReSharper renaming utility. Excluded jp and zh resource files.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.resx
* CA-34231: Rename missing language references for change to `coordinator`
Misc files were not saved before last commits.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `Messages.resx`'s code
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/HACommand.cs
# XenAdmin/TabPages/AdPage.cs
# XenModel/Actions/Network/CreateBondAction.cs
# XenModel/Actions/Network/NetworkAction.cs
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace negative language with `coordinator` in `ExternalPluginAction.cs`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`
Used ReSharper renaming utility. Also replace negative language in missed comment in `ExternalPluginAction.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/AddHostToPoolCommand.cs
# XenAdmin/Commands/HACommand.cs
* CA-34231: Replace negative language with `coordinator` in `Helpers.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `NetworkingHelper.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `PoolJoinRules.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`, `Controls`, and `Core`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/AddHostToPoolCommand.cs
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Diagnostics`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Dialogs`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenAdmin`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/MainWindow.cs
# XenAdmin/TabPages/GeneralTabPage.cs
# XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeExtrasPage.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizard.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizardPrecheckPage.cs
# XenAdmin/XenSearch/Columns.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenModel\Actions`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenModel/Actions/Network/CreateBondAction.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenModel`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative strings with `main` in `Messages.resx`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace remaining negative string names with `main` in `Messages.resx`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs
# XenModel/Messages.resx
* CA-34231: Rename dialogs to replace negative connotations with `main`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `SaveAndResoreOptionsPage.cs`
Also updated its resx file. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs
* CA-34231: Fix invalid reference in `SaveAndRestoreOptionsPage.Designer.cs` after renaming
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `EnterMainPasswordDialog.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `ChangeMainPasswordDialog.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Fix invalid reference not changed after renaming `EnterMainPasswordDialog.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `main` in `XenAdmin/Dialogs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Update class names in HelpManager.resx
Following renaming of main password dialog. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `Metadata.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Remove remaning negative language with `coordinator` from `Messages.resx`
Used ReSharper renaming
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Remove remaning negative language with `other pool member` from `Messages.resx`
Used ReSharper
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language in solution
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Remove commented out code in VNCGraphicsClient.cs
Code has only been improved partially as it's not strictly relevant to the PR
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend negative word replacement in XSVNCScreen.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Simplify debug call formatting in NewPoolDialog.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Add code mistakenly removed in MainWindow.cs
Removed as part of `f155f9c8`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Revert renaming of constant related to Windows' API
Considered external to CH Center
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend hotkey for Coordinator field in `NewPoolDialog`
Previous ALT+<key> hotkey was conflicting with CreatePool
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Remove unecessary whitespace in EvacuateHostDialog.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Update if block to exclude unecessary else in DRFailoverWizard.cs
Not relevant to the PR, but the change is small enought to no need extra testing
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend typo in PoolJoinRules.cs
supporer -> supporter
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace missing negative language with `coordinator` in `XenAPI-Extensions/Pool.cs`
Variables and methods XenAPI-Extensions were mistakenly skipped
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace negative language in `XenApi-Extensions` with `coordinator/interface`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace negative language in `XenApi-Extensions` with `supporter/member`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace remaining negative language in `XenServerHealthCheckBugTool.cs`
This is only used to format the string
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Change line-endings to CRLF in `Page_CloudConfigParamters.cs`
Done in order to fix merge conflict into master
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend misc negative language renaming typos
`XenServerHealthCheckBugTool` and `XenServerHealthCheckService`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
Moving and copying a VM should be treated differently, hence we need a different
SrPickerItem subclass for each operation. Minor logic simplifications.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, NoTargetServerPoolItem class should be private to the SelectMultipleVMDestinationPage
because it is not used anywhere else.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* Hid properties from the designer and renamed them because they give the wrong impression.
* Fixed some inefficiencies around the NetworkComboboxItem.
- Move NetworkComboBoxItem into the NetworkComboBox class.
- Moved XenAdmin.Dialogs.NetworkComboBoxItem into the VIFDialog class and made it
private to avoid ambiguousness with the public XenAdmin.Controls.NetworkComboBox.NetworkComboboxItem.
- Create a NetworkComboBoxItem only if needed and assign its name at construction time.
- Add method to select a NetworkComboBoxItem and property to return the SelectedNetwork.
* CA-339233: Do not allow selection of networks while they're locked.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also: removed unused method; some property modernisation; removed class
LiveMigrateOptionsVmMapping which was rather complicating things.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
The result was that numbers were changing suddenly; in cases of slow connections,
a user could make a selection before the scan was over.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Fixed button enablement on the IntraPoolCopy page.
- Regression on the NewDiskDialog were selection was considered valid
even if the SR was disabled.The SrSelectionChanged and SelectedIndexChanged
were fired in the wrong order. To fix this the event SrSelectionChanged
is removed (in reality after the refactoring in 5b79b1dc94
it became obsolete).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CP-30958: Initial implementation of the Conversion Manager in XenCenter.
* Corrections following review and improvements.
* Further corrections and improvements.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
In the CrossPoolMigrateCanMigrateFilter a WebException can be raised if the host cannot be reached to execute the API call that asserts is the VM can be migrated there. With these changes, we catch any exception (not just Failure) and mark the VM as not migratable (because we couldn't assert if it can be migrated to that host).
Also fixed other places where the same error might occur.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- When asserting if a VM can be migrated to a pool we don't have to check all the hosts in the pool at this point, we can enable the pool when we find the first host where migration is possible; we will check the rest of the hosts only if that pool is selected.
- If the destination pool is older than the source, then we don't need to do any server calls because we know that migration to an older host is not allowed.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- with this change the user won't see the misleading "Moving VM to new storage" in History if they tried to move the VM inside the pool, but actually didn't select different SRs for the VM's disks.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- if a VM can migrate inside a pool, then we will allow it in the wizard, even if storage migration is not allowed
- If it is a intra-pool migration (without moving the disks), then use the VM migrate action (which does a VM.pool_migrate), not the cross pool migrate action.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
When XenCenter checks if a VM can be storage-migrated (including in the same pool), it only checks if migration is possible to one SR (the first SR from the SR list that supports vdi creation), which could be a GFS2 SR, where migration is not supported. With this fix, we will only consider the SRs which support migration (instead of vdi creation).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
