Extended the enum, aimed for minimal changes, also using Flags on the enum now
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- If an upload is marked as failed, then display it in the UI (but only as long as there is no successful upload done after that)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Not applied updates do not appear anymore in the General Tab of a pool. (Related to CA-180577)
- If we apply a patch that was already applied (happens when we take a file from disk that is not in the updates list taken from the Citrix website -> no metadata), on cancel we are now removing the uploaded patch from the host.
Changed all the health check actions to perform the necessary role checks
- HealthCheckAuthenticationAction: changed so it does not save the tokens, so no role checks required in this action (all the checks are performed in SaveHealthCheckSettingsAction)
- GetHealthCheckAnalysisActions: added role checks
On the Health Check Overview dialog, a pool is displayed as read-only if connected as a user with roles that don't permit changing the health check settings:
- the following actions are not available: enroll, edit settings, disable health check, request upload, get analysis result
Adds tab indexing to the control for allocation and changes label names.
Corrects mistake that led to exception being thrown when the Disk Size is decreased in the the New Disk Dialog.
Fixing the unit tests pointed me at the command's CanExecuteCore where the check for Dundee or higher was missing. Fixed that as well.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Created ThinProvisioningParametersControl user control using existing code to have the thin provisioning settings at one place. It needs to be initialized by providing an SR and it will expose its internal state via NewSMConfig property that we need at other places.
This does not include refactoring of existing code or replacing existing code to use this new control, but the new Conversion dialog is using this. Next step would be to remove existing code and start using this new ThinProvisioningParametersControl instead.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- no “the” is needed in front of “Citrix Insight Services” (e.g. “…authenticate with Citrix Insight Services…” and not “…authenticate with the Citrix Insight Services…”)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Memory Tab uses GB units for values greater or equal to 1 GB, otherwise show in MB;
- Search Tab displays values in GB or MB in the same as the Memory Tab (e.g. 512 MB of 1 GB, 256 MB of 512 MB, 2.5 GB of 16 GB).
- The shiny bar present in the Memory Tab and in Memory Settings dialog shows the scaling in the following way: If smaller than 1 GB, then show as before, else show only labels with values multiples of half a GB.
- The units used in Memory Setting Dialog are set depending on the static_max. If it is greater or equal to 1 GB, then the units are GB, else MB. The user does not have the possibility of changing them.
- Add code to check license before offering quiescing on the VM Snapshot dialog
- If the feature is not available, the message displayed is: "This feature is disabled due to license restrictions on the server."
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Improves the centering of the warning messages in the Updates Tab, making the picture align with the text.
Corrects bug related to the visibility of the warning about automatic checks for updates.
- removed tooltip fro the "show again" checkbox and changed the chackbox text to say "Show this dialog..."
- fixed spacing in the right hand panel
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Thick provisioning - > Fully provisioned
- Subsequent allocations -> Incremental allocations
Also, updated the Next button on the Location page of HBA SR, to say "Next" for Dundee or greater and "Create" for pre-Dundee pools.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
CA-157785: Hotfix wizard forgets which servers should be greyed out.
When clicking Download and Install update in the Updates Tab, instead of opening a new dialog, it opens the Updates Wizard on the Select Servers Page and download the file in the Upload Page.
Fixes issue regarding the upload of the update every time that the user gets to Upload Page. Now it only uploads it if it has not been uploaded before.
Fixes issue regarding the download of the update every time the user goes back to the Select Patch Page. If the user goes back, but does not change the choice of the update, the download will not be done again.
CP-13035 : Add Refresh button to list of updates on the Updates wizard.
CP-13037 : Provide option from the Updates wizard to navigate to the web page of any hotfix.
The unit of VBD IO throughput is changed to MiB after merged all
VBD related data sources from xcp-rrdd to rrdp-iostat,
Signed-off-by: Kaifeng Zhu <kaifeng.zhu@citrix.com>
- added CallHomeSettings.TryParseStringToDateTime() function, which does not throw an exception if the conversion fails
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added new fields to the Health Check Settings dialog (XenServer credentials)
- these credentials are saved as xapi secrets, and on un-enroll they are being removed
- removed the Authenticate button; the authentication is now done on pressing the OK button
- the Health Check Settings dialog is displayed on "Enroll now" and "Edit Health Check settings"
- display the "Last Successful Upload" on the Health Check Overview dialog
- use uniform format when converting time to string and string to time
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
1. Using en-us to transfer upload request time
2. Check the pipe is closed before close it.
3. On demand upload will not have 24 hour due problem since it only check once in half an hour
4. Avoid get upload token by empty session.
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
- Call TransferCallHomeSettingsAction with suppressHistory=true so the action doesn't show on the Events page
- This change also fixes LogsTabTests test failure.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- When "Request upload now" is clicked, instead of disabling it, change the link to an unclickable text saying "Upload requested at....".
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- show new NIC column on the Location page (visible for FCoE only)
- display the summary page
- resource strings for default SR name and the blurb on the first page in the wizard
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Add VDI page, Initial Allocation Size field: To override default to
default value behaviour it is no longer enough to enter this field - at
least a change has to be made to it's value.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Add New Virtual Page (VDI):
By default, the SR's default initial size allocation percentage (that may be different for different SRs) is used.
Once the user has changed the initial allocation rate, the page would only use the custom value from that point.
New SR Wizard:
Minimal change in if statement and added comment in RunNextPagePrecheck
method for LvmoHba.
- add the option on the destination page of the wizard
- for authentication purposes, MyCitrix credentials are required.
- these credentials are only used to obtain an upload token that will be used for the upload.
- the upload token expires in 24 hours and is not saved in the xapi database.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added "FCoE Capable" column, showing FCoE capability as Yes/No values in the NICs grid
- This column is only visible for Dundee or higher hosts
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Changed code, because API needs 0-100 percent values as 0..1
-Code for HBA SRs
-Changed free space check for new VDIs to condider initial disk size only
when the SR is thin provisioned
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Making the "Open SSH Console" button visible but disabled instead of hiding it in the following cases:
-VM is suspended
-VM is running, but we do not know any IP address (eg no Tools installed on it)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Added this information on the VM's general tab, and it could be one of the following:
- Operating mode: Paravirtualized (PV)
- Operating mode: Fully virtualized (HVM)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Check call home enrollment status on connecting to a pool: If status is unknown it means that the pool is not enrolled (enabled) and has never been (disabled). If that's the case, then show the Health Check Overview dialog with the pool selected
- "Enroll now" on Health Check Overview will try enroll the selected pool into call home using existing token authentication. If this is not possible, then a dialog will be presented for the user to perform the initial authentication.
testSafe2Upgrade pugin function in prepare_host_upgrade.py is called as part of the RPU pre-checks
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Reverted previous fix 7608caafd7, because
managed to find the root cause of this issue: commit ce3bec1231.
Instead of reverting the latter completely, this commit fixes the regression by removing unnecessary calling of UpdateButtons().
Note: The button will still be enabled for dom0 console.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Changed the name of the operation in XenCenter to "Migrate VM" for suspended VMs, instead of "Move".
This clarifies the distinction between copy/move and migration:
- running and suspended VMs can only be migrated
- stopped VMs can be moved and copied
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- changes following code review: menu item available if multiple items selected inside the same pool
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Auto switch to RDP should be taken after VNC connection got the correct screen resolution.
Also not enable “enable RDP button” before VNC connection get the correct screen resolution.
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
Fixed the bug by subscribing to events of all actions and not only to the
ones that are displayed in the grid.
Besides this, the visibility of the row is being used instead of removing and
re-adding rows on status changes.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Using ShowDialog() instead of Show()
Also removed unnecessary code that displayed the popup again
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Passing suppressHistory=false in the MultipleAction's constructor (so no action item will be displayed in the Event view for the MultipleAction itself)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- On receiving a HOST_IS_SLAVE exception, only change connection.Hostname property if we need to connect to the pool master. Leave it unchanged if we are already connected to the pool, as no further action is required. This will ensure that we don't change the Hostname of a slave back to the master, if the user tries to connect to it immediately after it has been removed from the pool.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Check current XenServer Version, if current version is greater than Cream and PV tool installed, do not disable control button.
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
- store the empty vnc password after a successful login, to avoid displaying the login dialog box on a subsequent reconnection attempt
- abort the vnc connection attempt if we notice that vncIP is null and switch back to the default console
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- changes to the text to be suitable for migrate and copy operations, where possible
- added different text for copy on some pages
- also different text for single and multiple selection
- changes to text alignment, tab order, hotkeys on the copy pages
- removed Finish page from the intra-pool copy wizard
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- while upgrading a host, throw a HOST_OFFLINE ("Server could not be contacted") exception if the host can no longer be resolved (instead of HANDLE_INVALID)
- also corrected the parameters of the HANDLE_INVALID exception, as an extra parameter is needed for the friendly error name.
- in the UpdateManualHostPlanAction class I replaced Host with the private property _host in several places, so we are no longer trying to resolve the host each time we want to write something into logs
- added some null checks, to avoid reporting null reference exception
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added some null checks
- in the Cross pool migrate wizard, add Transfer network page for all cases except intra-pool move (which is performed via VMMoveAction)
- added comments to VMCrossPoolMigrateAction constructor to make it cleared what the copy parameter means
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-New Network Wizard: Changing the layout on the network type selection page to make this page "dpi aware" using FlowLayoutPanel. Additional info is shown on the bottom of the panel instead of tooltips, some code has been removed that used fix positions and moved controls around.
We observed that some threads can reach deadlock-ish state after they have Invoked into a control's UI thread. When it happens they are all in a waiting for join or in sleep state for very long time, although there should not be any deadlock situations.
It seems this has something to do with multiple parent controls and with which control we invoked on. This should not make a difference, because we have got one UI thread (for MainWindow) they should wait for, but we have seen it does.
The solution that fixed this issue was to invoke on the MainWindow instead of various controls (see a4fe507adf ).
This changeset is changing all our Invokes to invoke into MainWindow
instead of a control itself. (MainWindow's UI thread is the only UI thread
all Control is using in XenCenter)
This changeset should be in place until we have found the root cause or the exact reason for the above.
- modified CopyTemplateCommand to launch a cross pool copy if permitted
- added CrossPoolCopyTemplateCommand which opens the Cross pool migration wizard in "copy" mode
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added a "copy mode" page to the Cross pool migrate wizard (when in copy mode) where the user can select intra-pool or cross-pool copy
- If intra-pool option is selected, then the wizard will display a page similar to what we currently have in the Copy VM dialog
- If cross-pool option is selected, then the wizard will display all the cross pool migration pages
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- modified the VMCopyCommand to launch a cross pool copy if permitted
- added the CrossPoolCopyVMCommand which opens the Cross pool migration wizard in "copy" mode
- modified the cross pool migrate action with an extra "copy" parameter, which will add a copy option to the vm.migrate_send function call
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- When deciding whether to allow GPU configuration on a VM, check if the HA is enabled, not just the the VM's restart priority setting
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-We used to check host.RestrictVgpu instead of checking the API version when populating the dropdown on the GPU Settings page. This is not sufficient anymore as it depends on the license too, so changed the code to check version (vGPU was introduced in Clearwater SP1).
Changes following code review:
- add static methods to the cross pool migrate and move commands to determine if the command can execute
- In the Cross Pool migrate wizard: add Transfer network page for cross-pool move (and copy) operation (as well as all migrate cases)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
This code change is to set “switchOnTabOpened” in below condition:
1. XenCenter have “Automatically switch to the Remote Desktop console when it becomes available" selected
2. VM have RDP enabled.
3. XenServer Version is Cream or greater.
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
-Making CIFS radio button invisible (instead of visible but disabled) when CIFS is restricted (license)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
-New SR Wizard - SR Type Selection page: radio buttons are now on a TableLayoutPanel with auto sized rows
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- With these changes, a stopped or suspended VM can be moved across pools; this is performed as a vm migrate operation.
- The intra pool move will continue to be a vdi.copy + destroy operation for stopped VMs, but for suspended VMs we need to do it a as vm migrate operation.
- We use the Cross Pool migrate wizard for both intra and cross pool move operations, but introduced a wizard mode parameter in order to adapt the wizard to the specific operation we want to perform (migrate, move or copy)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-NFS version selector radio buttons now belong to the Create new SR option. This section is disabled on reattaching.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
New SR Wizard:
* Removed "V" Alt-key from "NFS Version" text
* Changed the alignment of the NFS version selector radio buttons to vertical
* Fixed tab orders at all places
"* New SR wizard -> Type page: Add more info for CIFS (similar to what we display for NFS)
* New SR wizard -> Type page: Rename the other types to:
** Virtual disk storage: NFS, iSCSI, Hardware HBA, CIFS
** ISO library: Windows File Sharing (CIFS), NFS ISO
* Autogenerated description should say "CIFS SR" (not NFS SR)
* SR type (as displayed on the General tab for a CIFS SR) should by CIFS (not Unknown)
* New SR wizard -> Location page for CIFS: correct tab order"
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- override the Equals function on HostOutOfSpaceProblem to check the disk space requirements, not the Description.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Show ports as: Address: 0.0.0.0; Public port: 8088; Private port: 8088; Protocol: tcp (multiple lines if more than one set)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-updating Errors property in SrWizardType_Cifs with the Failures that can occur when doing CIFS SR operations
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Implemented changes as follows (copied from ticket):
"I'd suggest the following use-ability/homogeneity fixes for the new container management tabs, if they are quick and easy:
Combine "Docker Version" and "Docker Information" on the VM-General-tab into "Container Management - Docker Status" with the following fields only:
API version
Version
Git Commit
Driver
Index Server Address
Execution Driver
IPv4 Forwarding
In the "Processes" tab, change the name from "Docker Processes" to "Container Processes"
In the "Details" tab, change the name from "Docker Detail" to "Container Details"
In the "Details" tab, drop the top level element "docker_inspect" (XML requires a single root-node, afaik the Windows form treenode does not), or alternatively open the root node by default and rename it to "Inspect Result"
In the "Details" tab, add the "Details"-headline in black on white - just like on the "Processes"-tab
Also, on the container's General tab, show Properties button disabled, instead on hiding it (to be consistent to other cases, e.g. disconnected servers)
"
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
-Added support for CIFS (SR type, SR Wizard)
-Added some Debug.Asserts to the Create SR action to watch for clear text paswords
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- When the install fails, log the full error description
- Added a specific exception for the supp pack installation failure
- Better action title (depending on the number of servers it applies to)
- Added a "More Info" button on the "Update" page, which displays a message with more information on the supp pack installation failure
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- If failed to retrieve the config parameters, then make the ConfigDriveTemplate textbox read-only and display the reason why it is not editable (similar with what we do for running VMs).
- In the New VM Wizard, if the action on "Reset to Default" button fails, then popup a message box with an error saying that we were unable to retrieve the default parameters. In this case, the ConfigDriveTemplate textbox remains unchanged.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- changes following code review: simplified the code that determines the current state; and renamed some variables.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added a "Integrated GPU passthrough" section to the PoolGpuEdit page.
- This section is only visible for a host that has GPU capability and the enabling/disabling of integrated GPU passthrough is not restricted.
- With this addition, the GPU page can now be displayed for a pooled host as well (previously only pool or standalone host)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Disable the Refresh button while a refresh is in progress.
- Introduced ExecuteContainerPluginAction - an action that stores the container it was called for, so that on completion we can decide whether to update the view or not (if the container displayed has changed, then we shouldn't update the view with the results from a previously selected container).
These changes apply to container Processes and Details tabs.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- also made Refresh buttons the same size on Details and Processes page and changed Details tab caption from "Detail" to "Details"
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- this applies to the Cloud-config page on the New VM Wizard and VM properties dialog.
- same for the container enlightenment page on the VM properties dialog.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Show a “Read Caching” section on the General Tab of a VM when the VM is running on a Cream or greater host
- When the Read Caching is enabled, the “Read Caching” section will contain two entries: Status and Disks (list of disks with RC enabled)
- When the Read Caching is disabled, the “Read Caching” section will contain two entries: Status and Reason
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Instead of calling the plugin on the UI thread, we call it through an action that we execute asynchronously and on completion update the UI.
- Pause the refresh timer on leaving the page and resume it when entering the page again.
- We do this for both Processes and Details page.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Pool_patch.precheck can fail with the xapi error OUT_OF_SPACE when is trying to copy the patch from master to the slaves. This happens before the patch-precheck checks if enough space is available for installation. Therefore is different from the error we are currently processing, PATCH_PRECHECK_FAILED_OUT_OF_SPACE
- If the precheck fails with OUT_OF_SPACE then we try and retrieve the disk space requirements and report a HostOutOfSpaceProblem.
- Changed the PatchPrecheckCheck to try and find problem from a xapi failure, as well as from the result of the precheck call.
- Also removed ampersand from the the link labels (More Info and Clean up)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- The cloud config parameters page is only visible on a VM that already has a config drive.
- The cloud config parameters can only be changed when the VM is halted.
- In the New VM wizard, if a template is selected that already has a config drive, them the wizard will display the existing configuration, not the default one.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Remove “Remote access is not enabled on this guest” in cream in below condition:
1.RDP status is on
2.PV driver is cream or greater
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
- Showing all detailed information from a docker_inspect call
- The information refresh/polls every 20s while it's open
- Button “Refresh” add, so user can refresh the result. Also shows time when the last refresh happens.
- Add TabPageDetails as value 9903 in HelpManager.resx
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
-Added HostOutOfSpaceProblem to let the user to clean up disk space when getting PATCH_PRECHECK_FAILED_OUT_OF_SPACE error at precheck stage in the patch install wizard.
-A bit of refactoring of DiskSpaceRequirements class in order to be reused here
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
This fixes the following issue: when displaying the General tab of a container, the Properties button is hidden, but not made visible again when switching to another object type (e.g. VM)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
1.Add ports and command in DockerContainer object
2.All labels in General box are internationalized.
3.Add UUID, command, ports in General box
4.Export DockerContainer in ICache
5.Modify tab title to "Container General Properties"
6.Remove properties button
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
New Page: Enlightenment on VM Properties Dialog, visible only for:
- VMs on Cream Or Greater hosts
- that can be enlightened, regardless of their power state
A VM can be enlightened if the key "xscontainer-monitor" exists in other_config.
A VM is enlightened if other_config:xscontainer-monitor if true.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- don't update the progress bar when checking disk space (only the description)
- the color used for "in progress" action description (above the progress bar) should be the system default font color, not black
- actions should throw ArgumentNullException, not NullReferenceException
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Before starting the upload to the master hosts, check if there is enough disk space (check only performed for Cream or greater hosts)
- If enough space available the upload starts automatically; otherwise an error is displayed
- If we can free up enough disk space then we offer the option to Clean up. Otherwise we provide the user with the information on required and available space and the user will have to manually free up required space.
- Also Disable the Upload page for oem updates
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The 'Updates' section on host's General tab displays which packs have been installed onto a host, including the version number
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
UploadSupplementalPackAction:
- use http-put with the default timeout
- throw current exception in RemoveVDI (instead of encapsulating it in a new one)
- add other_config key before uploading to make sure the vdi has this flag set from the beginning of its lifetime
- upload progress bar now shows the total progress per row
Also included a cosmetic rewrite of PatchingWizard_PatchingPage,GetUpdateName function
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
1.Add xapi version check in cream since Cream and Creedence have the same platform version
2.Check feature-ts2 to see if turn on RDP feature can use on specific VM PV tool
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
- update the Patch property even when the selected update type is not "Existing patch". This will be set it to null if the selected type is supplemental pack.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Select a supp pack in the hotfix wizard
- Recognise that it's a supp pack not a hotfix
- Check if there's enough space on a SR to contain it: (1) default SR if shared or (2) any shared SR or (3) local SR on each host in pool
- Create a VDI to contain it
- Upload the supp pack to the VDI
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- In the case that there are two hosts in a pool, one with GPU and one without, then the one without will display a text saying "There are no GPUs on this server".
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added check for Clearwater SP1 or greater to the gpu capability on the New VM wizard
- On the GPU tab, draw the grid on the shiny bar only if the capacity is greater than one
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changes following code review:
- Added VM.CanHaveVGpu function (at the moment just returns CanHaveGpu, but it will change in the future)
- Added vGPU_type.IsPassthrough function and used it everywhere we needed to test for passthrough (max-heads==0)
- Simplified code in Helpers.GpuCapability, Helpers.VGpuCapability, NewVMWizard (gpuCapability), MainWindow and GpuRow
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
New properties:
- Pool.HasGpu = Pool has at least one PGPU
- Pool.HasVGpu = Pool has at least one PGPU that HasVGpu
- PGPU.HasVGpu = PGPU has at least one supported_VGPU_type that is not pass-through
New or modified helper functions:
- Helpers.GpuCapability = GPU feature not restricted (by licensing) and Pool.HasGpu
- Helpers.VGpuCapability = vGPU feature not restricted (by licensing) and Pool.HasVGpu
- Helpers.ClearwaterSp1OrGreater = API version is 2.1 or greater
The GPU dialogs are displayed as follows:
- GPU page on VM properties dialog: Visible only if VM.CanHaveGpu and the GPU feature not restricted (by licensing)
- GPU page on New VM Wizard: Visible only if VM.CanHaveGpu and the pool has GPU capability (Helpers.GpuCapability)
- GPU page on Pool properties dialog: Visible only if the pool has vGPU capability (Helpers.VGpuCapability)
- GPU tab: Visible only if the pool has GPU capability (Helpers.GpuCapability) and is Clearwater SP1 or greater
- On the GPU tab, the "Placement policy" panel: Visible only if the pool has vGPU capability (Helpers.VGpuCapability)
- On the GPU tab, the "Edit" button on the "vGPU types" panel: Visible only if the PGPU.HasVGpu and vGPU feature not restricted (by licensing)
Also:
- VM.CanHaveVGpu function renamed to CanHaveGpu
- On the GPU tab, renamed "Allowed vGPU types" to "vGPU types
Instead of showing just the name, this code is showing name with location information in title for all objects that appear in the tree view.
(A new property (NameWithLocation) with a getter accessor defined in IXenObject and has been implemented as virtual in XenObject and overridden at several child classes.)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Show pool (or standalone server) name on the Upload page.
Also corrected some resource strings.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added new page to the patching wizard, called "Upload" which displays the upload actions for each server and the progress of these actions
- MultipleAction: added the functionality to optionally stop the action on first failure
- Fixed the error where an existing patch downloaded from another server and then uploaded to a new one was not deleted on cancelling the wizard [CA-156788]
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
