are set unless the new value is actually different. Small efficiency improvements
to the DownloadPatch action and plan action.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
a message in this case as the SRs are reconnected after reboot and this may lead
to duplicate messages. Also, simplified check-and-plug methods for PBDs to avoid
repetition of iterations.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* Deprecate set but unused Status property in favour of ProgressDescription.
* Deprecate set but unused TitlePlan property.
* Deprecated property Title in favour of ProgressDescription.
* Removed unused plan RebootHostPlanAction.
* Updated event declaration.
* Removed property Visible. The plan is to have the actions log their history as soon as some is available.
* Reworked the logging for the plan actions. The main change is the replacement of
the ProgressDescription with a stack where all the steps of an action are stored,
i.e. the action is responsible for its history, not the worker running it.
* Lock the progress history before accessing it.
* Better handling of error logging and user cancellation.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
1) Always pool level selection of hosts, except uploading sup pack file
from disk.
2) Revert homogeneity precheck change recently. It won't happen in new version
update any more.
3) User can never update slaves to a higher version than master, so delete
master_version_not_compatible_problem.
Signed-off-by: Ji Jiang <ji.jiang@citrix.com>
- In the RPU case, re-enable the host after the upgrade is done, as the host will be put back into maintenance mode when needed during the update process.
- The VMs should not be repatriated during the RPU
- When a host is rebooted, it needs to be disabled first (even if an evacuation is not needed), otherwise the reboot won't happen
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Renamed HostPlanActions class to HostPlan to avoid confusion with the HostPlanAction class.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Also corrected the function that creates the update plan action in RPU: when running a retry, these actions shouldn't be regenerated.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Some methods have been moved/added to the base class to facilitate the calculation of the plan actions in the RPU case.
- Also fixed the calculation of the progress bar value.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The base class contains all the code for creating and starting the background workers, displaying the progress of the actions, handling failures and retries.
The derived classes override the property for label at the top of the page and the method that generates the plan actions.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- ensure that an action is only added once to the DoneActions and InProgressActions
- reset the wizard buttons (Cancel, Finish) when a retry is started
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CP-28286: Support resume from a partially upgraded pool via Update wizard
Signed-off-by: Ji Jiang <ji.jiang@citrix.com>
* CP-28286: Fix comments of the previous commit
Signed-off-by: Ji Jiang <ji.jiang@citrix.com>
and unregister item event in a try-finally block (may cure CA-289721); suspend-resume
layout when updating the datagridview.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- use the plan action's ProgressDescription property to display the steps in RestartHostPlanAction (evacuate host, reboot host, bring babies back);
- the plan action should not be visible if the restart is skipped;
- The change to the DownloadAndUnzipXenServerPatchAction is to ensure that the download progress description is updated on the wizard with the correct description (in automated updates mode, via DownloadPatchPlanAction); DownloadPatchPlanAction is using the ActionChanged event to update its description based on the action's DownloadProgressDescription property, but the ActionChanged event is called when the PercentComplete is updated, so this needs to happen after DownloadProgressDescription has been updated.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- also fixing an error on the patching wizard where a null reference exception is thrown if, when the wizard is cancelled, the host where an update has been uploaded is not connected anymore
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- The LVMOHBAWarningDialog class has been changed to display the type of the existing SR and the requested type (that will be used for formatting)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Move the scan for HBA devices after the Provisioning page
- Fix the device-config for HBA (removed uri)
- Add probe_ext in FibreChannelProbeAction and the method to process the result
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
When we scan the LUN to see if there are any existing SRs, we need to do an additional probe if the probe for the desired type didn't find any SRs.
E.g. if GFS2 is selected and no GFS2 SR was found on the LUN, then we need to also check if there is a LVM over iSCSI SR, and if there is one we will offer to reattach it (as LVM over iSCSI) or format it as GFS2
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CP-26363: Display the remaining VF numbers in NIC TabPage
* correct the link status of Networking TabPage
* show the warning when creating SR-IOV network
* fix some comments
* modify the action
Signed-off-by: Jisheng Xing <jisheng.xing@citrix.com>
* update the XenAPI according to the Jason-RPC
* CP-26362: Enable create SR-IOV network
* fix review comments
* fix the judgement on SR-IOV details page
* disable the finish button
Signed-off-by: Jisheng Xing <jisheng.xing@citrix.com>
* CA-274082: Check status of SR uploaded updates during update installation
* fix review comments
Signed-off-by: Jisheng Xing <jisheng.xing@citrix.com>
us a lot of broken builds. Fixed bug where the HostPlanAction.CurrentHost was
always null (as the private field was never set).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
PageLoaded override in derived classes, enforce it by wrapping the page specific
code in a new virtual method, which the derived classes can override and PageLoaded
can call after its own logic.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
override in derived classes, enforce it by wrapping the page specific code in
a new virtual method, which the derived classes can override and PageLeave can
call before its own logic.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
WizardContentUpdater is invoked and information flows from the SelectInstallMethod
page to the following pages.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
For this purpose, the evacuate-reboot-bringbabiesback triplet was replaced by a
new RestartHostPlanAction, which allows fallback to toolstack restart if live
patching has succeeded. Also, created new abstract class HostPlanAction to
reduce code duplication.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
List in order to enforce the order of checks (the Dictionary is not guaranteed to
keep the order the items are added). Also, extra null check.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
in the Host extensions. Moved method TryResolveWithTimeout to the Connection class
where it is more relevant. Removed wrapper methods WaitForReboot and WaitForAgent
as they were not particularly useful.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
alongside the wizard progress buttons. For this purpose, the separate UpdateControls
method was removed and the logic was moved in the EnableNext method. The OnPageUpdated
method that fires this is now called every time the checks start.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
calculating the AfterApplyGuidanceActionsForPatch twice when the patch had
mandatory guidance.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-280329: Fix CrossPoolMigrateDestinationPage with Current Server showing
Signed-off-by: Kun Ma <kun.ma@citrix.com>
* CA-280329: Refine usage of CreateTargetServerFilterList
Signed-off-by: Kun Ma <kun.ma@citrix.com>
* CA-281646: Do not download the update again when using an update from disk
When applying a "new version" update, XenCenter starts an automated updates sequence that by default downloads all the updates. However, when using an update from disk, we shouldn't download it again.
With these changes, when an update from disk is used we save the [update, path] mapping, which we then use in the automated updates sequence, so we don't download that update again.
Also fixed a bug where a zipped update file from disk is not identified as a new version.
* CA-281646: Remove unused directive
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-280287: Fix the null reference exception on the Import wizard
- Added a check so that we don't attempting to show the license warning if the wizard is open without a preselected host/pool.
- The license warning is now updated whenever the host selection changes; plus, we are not attempting to show it if the wizard is open without a preselected host/pool.
- Also a minor refactoring in the GlobalSelectHost page to fix this issue: when the wizard is open with a pre-selected host, we pass this to the page by assigning SelectedHost property, which in turn sets the m_selectedHost. The getter for SelectedHost resets m_selectedHost to the selected item in the host list. If the getter is used before the host list selection is updated, then the desired pre-selection is lost, because m_selectedHost is reset to null.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-280287: Corrections following code review
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- The new "server selection" precheck is added for Inverness or greater pools and checks if all the servers in the pool are selected (if update not already applied) when applying an update that has the "enforce-homogeneity" flag set to true
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CP-25564: Changed clusteringEnabled variable
* CP-26026: Added a link to enable clustering on SR Wizard
* CP-26026: Tweaked according to PR feedback
* CP-25967: Added license restriction for GFS2
Signed-off-by: serenc <seren.corbett@citrix.com>
Instead of showing the cross-pool migration upsell dialog, we now show the wizard, where user can try to perform an intra-pool copy (the cross-pool option is disabled with an explanatory message displayed)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Increased the wait between host_enable attempts, allowing to wait more for the host to reboot.
This will affect Automated Updates and other normal Patching Wizard
operations as well.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
CA-267330: [Update Wizard Improvements] The Update wizard: block the installation of an update on slaves if a reboot or a toolstack restart is pending on master
when the max tolerance is being calculated, the text and icon on top of HA
wizard is no longer visible after this fix.
Signed-off-by: Ji Jiang <ji.jiang@citrix.com>
* CP-24412: Apply a filter before adding USBs to candidate list in Attach Dialog.
* CP-24333: Apply HA restraint.
* CP-24412: Fix a merge error.
* CP-24412: implement actions to attach/detach/passthrough.
* CP-24412: Add license check before making UI components visible.
* CP-24412: Change layout of new components to Dpi.
* Fixed all comments.
* Fix comments.
* fixed comments
* CP-24709: Add a warning in the New VM wizard and Import wizard if the pool is licensed using XD/XA entitlement
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CP-24709: Add a warning in the New VM wizard and Import wizard if the pool is licensed using XD/XA entitlement
Fixed unintended designer code additions/changes
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Also includes some improvements to the Select Pools page of the RPU wizard
- do not show the checkbox if the item is disabled
- show the icon for the pool items, not only for hosts (making this consistent with the similar page in the Update Wizard)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The commit fixes bug and unify sorting rules in ManageUpdatesPage,
PatchingWizard_SelectServers and RollingUpgradeWizardSelectPool data
grid views.
The rules are:
1) Name column sorted purely by name.
2) Other columns sorted by string value, if the same, sorted by default,
which is still in order even in reverse direction.
Signed-off-by: Ji Jiang <ji.jiang@citrix.com>
on the VM Snapshots page; update VM's status on the Snapshots page when the
VM's membership in a policy changes.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Fixed a bug that caused XenCenter to try to apply an update (that the user manually selected) multiple times and therefore failed. This was only present when the Select All button was used.
it's not needed as it does not make server calls. Some more refactoring and corrections
here and there.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
prevent them from being serialised alongside the API properties. This will also
be useful for moving the API bindings out of XenModel.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Change the "Web page" column alignment to TopLeft, to match the other columns
- When trying to find an alert from a filename, use the patch name instead of the alert name, because now the alert name can also be a version name
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-249823 - Accept zip files in Updates Wizard
* CA-258326 - Improve implementation of CA-248823(Accept zip files in Updates Wizard)
* Small unrelated bugfix: Stop selectFromDiskRadioButton being checked when
restoring dismissed updates.
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
* CA-257574: Manage vApps dialog is unusable with a vApp containing a large number of VMs
- In the VMAppliancesDialog, change event handlers to reduce the number of refreshes when something changes: only reload the appliances when the VM_appliance collection change; if a relevant property is changed (in VM_appliance or VM), then update only the affected rows.
- Improve the way we assign VMs to a group (AssignVMsToVMApplianceAction and AssignVMsToPolicyAction): only update the VMs that really changed.
- Also improve the way we update the VM startup options and HA restart priorities on a set of VMs
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-257574: Manage vApps dialog is unusable with a vApp containing a large number of VMs: changes following code review
- reverted the changes to the AssignVMsToGroup actions that added the additional constructor
- changed the AssignVMsToGroup actions to calculate the set difference between two lists more efficiently
- added code to deregister PropertyChanged events on VM_appliances
- removed getCurrentSettings() method as it is not needed, GetChangedSettings can be used in all cases
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Ensure that the disk-space plugin functions are not called on Ely or greater hosts, except for the 'get_avail_host_disk_space' function, which is still needed
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Due to a regression (introduced by [1]), XenCenter will not run delayed actions in the correct host-order at all times. This can cause the master to be not the first host to be rebooted what may result in connections being lost to slaves should the API change between restarts/updates in a way that it would not be compatible to the previous version. This would make the wizard fail and users would have to restart their master host manually to make it connect to its slaves again.
This commit fixes the order of the hosts when executing the delayed actions.
[1]: 15827512e1
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- removed unused methods and properties from the NewPolicyWizard class
- made the wizard pages private in the NewPolicyWizard class
- removed unused constructor from the NewPolicySnapshotTypePage class
- removed unused property from the PolicyHistory class
- removed the public properties TreeView and DataGridView from the SnapshotsPage
- removed the PolicyType from the PolicyAlert class and the constructor that is no longer used
- removed unused property from the VMSS class
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
In rare cases, the GetMaster could return null, causing the update progress to fail with "Pool_patch or Pool_update not found". (when the Cache hasn't been populated by the execution gets here)
This commit drops GetMaster and uses a pre-saved masterUuid instead of waiting for the Cache what would be the other way to solve this issue.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Moved "Legacy Windows" template to the bottom of the Windows templates
to discourage users from selecting it and avoid it being selected by default
at the top of the list as was the case.
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
