of the hosts to be upgraded and not only on the first one in the list.
For this purpose, the test has been moved to the prechecks, and the
failures are now shown as a non-fixable problem.
Further, specification of the network location of the installer files
has moved closer to the upgrade mode selection.
Also, moved the hotfix and upgrade related checks immediately after the
host liveness check.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Moved these errors to the FriendlyNames, which is reserved for resources with
keys coming verbatim from the server.
Some code efficiency corrections to the page's workflow.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
because it only manages friendly names; moved it closer to the relevant resource files.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CP-30335: Fix RPU wizard tests
* CP-30335: Add abstract class WarningWithMoreInfo and use it for two of the existing Warnings
* CP-30335: Add a new precheck which produces a warning if the Dom0 memory after the upgrade will be increased.
- if the Dom0 memory after the upgrade is known, then a warning is shown if this is higher than the current memory, regardless of the version of the upgrade
- if the Dom0 memory after the upgrade is not known (e.g. because the rpu plugin does not have the function that returns this), then a warning is shown if upgrading from a pre-Naples version
* CP-30335: Add a more detailed error message if the host evacuation fails due to not enough memory in the RPU and Patching wizards
* CP-30335: Add branding variable for version 8.0
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Moved Install Location (RollingUpgradeWizard_SelectInstallMethod) page immediatelly after the Upgrade Mode page (and before the Prechecks page)
- Added a new page, called Extras, which contains the updates and supp pack installation options. These options have been moved here from the "Upgrade Mode" and "Ready To Upgrade" pages. This page is also inserted before the Prechecks
- There is no "Ready To Upgrade" page anymore. So the wizard pages are:
- when automatic mode is selected: Before You Start, Select Pools, Upgrade Mode, Installer Location, Extras, Prechecks, Apply Upgrade.
- when manual mode is selected: Before You Start, Select Pools, Upgrade Mode, Extras, Prechecks, Apply Upgrade.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
or upgrade process (either when cancelling the wizard itself or when exiting
the application). Rephrased confirmation message for clarity.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- removal of the SystemStatusAction launching the individual SingleHostStatusActions,
because the connection was set incorrectly to the last one of the selected
connections and, if an error occurred to that connection, the data collection
for all of them failed.
- proper handling of HTTP.CancelledExceptions.
- replacement of the FlickerFreeListBox by the more versatile DataGridViewEx.
- corrections to reporting progress for individual hosts as well as page totals.
- made collection of client side data more obvious.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* Simplification: use auto-properties.
* Removed unnecessary null check. Converted private methods to linq method chain.
* Removed unused file. Added null check.
* Corrected property names as it was difficult to distinguish between the alert,
the patch and the filepath.
* Removed duplicate lock.
* CA-296490: Rewrote the logic uploading single updates so as to facilitate uploading to multiple pools in parallel.
* Corrections as per code review.
* Account for the case of uploading from disk legacy updates that do not correspond to an update alert.
Removed unfriendly error messages (the failure is written out in the logs anyway).
* Wizard test corrections and some modernising:
- Only call cancel on the last page if the test allows us to.
- Do finish the UpdatesWizard test.
- Finish the RunWizardKeyboardTests using key strokes instead of button clicks.
- Ensure the Cancel/Previous buttons do not have focus when sending an Enter stroke.
- Use optional parameters in the WizardTest constructor and string interpolation.
* Renamed badly named property.
* Improved code cloning VMs by assigning new opaque_refs to cloned VBDs.
Compacted test object provider: use optional parameters instead of method overloads.
* Modifications to prevent multiple update of enabled state and ensure the wizard
buttons are updated last.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Signed-off-by: Aaron Robson <aaron.robson@citrix.com> (+1 squashed commits)
Squashed commits:
[170a204c] CP-29875: Campaign/Version number should have underscores as separators not points.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com> (+1 squashed commits)
Squashed commits:
[ead4af87] CP-29857: Ensure that the help URL is fully lower case.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com> (+2 squashed commit)
Squashed commit:
[0350c0a6] CP-29875: Include campaign, medium and source in the help URLs.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com>
[1e1c1c1c] CP-29875: Refactor and unit test current help URL behavior.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com>
* Updated API bindings to include fix for CA-305383 (Do not save unchanged Snapshot Schedule information). Added unit tests for corrected Helper.AreEqual2 which now considers identical, though not reference equal, generic lists or dictionaries to be equal.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com>
updates until Refresh was clicked. Also, some UX improvements:
- The Install Updates button should always be enabled in case the user wants
to install supp packs.
- If a type of update is disabled, show always the message at the top of the
grid view, for both views, and even if the list is not completely empty,
otherwise the user may easily forget the update is disabled and be misled.
In this case, the centred warning does not need to show the reason why no
updates were found.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Use two separate feature flags, `guefi` and `guefi-secureboot`, with the following rules:
- If the feature is disabled, then the option is hidden in XenCenter.
- If the feature is enabled and experimental, then the option is visible and a warning is displayed in XenCenter (in the New Vm and Import wizards).
Also show the reason why a boot mode option is greyed out (when the uefi/uefi-secure boot mode is not supported in the selected template).
(On the Page_InstallationMedia control, I moved the BootModeContol and PvBootBox controls inside the TableLayoutPanel, to allow better alignment and for better visibility in the design mode)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- In the New VM wizard, the boot mode control is only visible for Naples or greater hosts
- In the Import wizard, I had moved the boot mode options to a separate page, added after the target selection page, to allow the version check. The new "Boot options" page is only added for Naples or greater hosts.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CP-29856: Support minimum number of vCPUs in guest templates
- Show a warning if the user wants to set a smaller number of vCPUs than the minimum specified in the template
- Add a null check; Set the warning label text before making it visible to avoid flickering.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Refactored redundant IP Address parsing code from XenAPI-Extensions/VIF.IPAddresses and XenSeach/Common.IPAddressProperty into the FindIpAddresses method in the Helpers class to handle multiple networks on a single line with a separator. Added unit tests.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com>
CA-303516: Cannot change dom0 memory via XenCenter.
Allowing the user to proceed (not set the value and min/max to 0.0GB) even if the memory static min and max is in the wrong order.
Adding further detail to the error message in case an out of bounds value is sent to the API which could potentially happen due to the range widening that occurs if the min/max would invalidate the existing value.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com>
closed on double-clicking on the node expanded icon. Some improvement in the
use of the folder name prompt dialog.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Corrected folder selection; reduced clicks required to select folders;
improved text; added delete button.
- Moved FolderChangeDialogTreeView to the same folder as the other TreeViews;
- Added missing null checks to the MutliSelectTreeView and hid properties
HScrollPos and VScrollPos from VS's designer (the former was initialised
to zero every time the designer was updated, causing the treeview images
to disappear).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Stepping up the PercentageComplete manually is not required as PollToCompletion is doing this for us already.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com>
This fixes the bug in the Patching wizard, where the wizard does not show any error and does not notice the disconnection, so it is stuck in the Installing update phase.
The Patching wizard only uses the ApplyUpdateAction class, but I had also changed the ApplyPatchAction class to avoid similar problems in the RPU wizard, where this action is used to install the RPU hotfix during the prechecks.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-272847: Compilation time is way overestimated (when creating a server status report).
- As the times are made up of server timeouts they overestimate quite significantly, we are removing the time estimates from the screen.
- Do not mention being able to see the time that has been removed inside the explanatory label.
- Removing further unused Util functions LThanTime and GThanTime.
- Redone the layout with the privacy link on a separate row to avoid wrapping at smaller sizes and to even up the layout of the Select/Clear buttons with the Total Size label.
- Fixed the tab indexes and removed the invisible Split Container.
- Adjusted the blurb margins to our default and set the last row with the privacy link to be AutoSize rather than absolute in case of truncation in other languages.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com>
When XenCenter checks if a VM can be storage-migrated (including in the same pool), it only checks if migration is possible to one SR (the first SR from the SR list that supports vdi creation), which could be a GFS2 SR, where migration is not supported. With this fix, we will only consider the SRs which support migration (instead of vdi creation).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Also, simplified the logic selecting the single update when we leave the
SelectPatchPage so as to avoid ambiguities in which properties are to be set
and refactored the error handling methods to avoid duplicate checks and
provide the right error message (for example, the error message was misleading
for a non-existent path; or, the level of detail provided in the case of
invalid zip content was of lesser relevance to the user).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CP-27819: Manually setting the ToolsVersion to 15.0 (VS2017) in all .csproj files for consistency and to attempt to enforce consistency of dev environments with the explicitness of the msbuild scripts as used in the build environments.
Auto updated as many of the .sln and .csproj files as VS2017 was willing to do https://docs.microsoft.com/en-us/visualstudio/ide/reference/upgrade-devenv-exe?view=vs-2017 and included changes to the gitignore to ensure that the update report and backup files are not included in the repo.
* CP-27819: Tidying up by removing FileUpgradeFlags, OldToolsVersion and UpgradeBackupLocation nodes from the .csproj files as they are produced as hints for how to revert project upgrades for which we can use version control.
* CP-27819: Removing redundant "ManifestCertificateThumbprint" and "ManifestTimestampUrl" nodes from project files "mk\sign.bat" has been used for this purpose for some time now.
* CP-27819: Updated readme to reflect that VS2017 is now in use.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com>
* CA-172658: Descriptive error message when failing to suspend a VM f om XenCenter.
Checking if a VM has a pass-through GPU or a vGPU assigned and showing the reason in dialog and tooltip.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com>
