- Handle validation for OVF files with a name different from the containing
OVA package. Other corrections to wrong validation logic.
- Show validation warnings on a dialog that can be turned off.
- Clean up extracted files after an OVA package has been imported.
- Plus code refactoring and simplification.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Fixed button enablement on the IntraPoolCopy page.
- Regression on the NewDiskDialog were selection was considered valid
even if the SR was disabled.The SrSelectionChanged and SelectedIndexChanged
were fired in the wrong order. To fix this the event SrSelectionChanged
is removed (in reality after the refactoring in 5b79b1dc94
it became obsolete).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Moved path validation checks from the wizard to its last page (planning
to remove XenWizardBase.FinishCancelled in future).
- If the directory did not exist, the user saw a message about inability
to write a file which was misleading. Check directory existence explicitly.
- Populate the last wizard page on load rather than on construction to
avoid unnecessary validations.
- Save in the settings the report output directory, not the filename.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, minor layout correction, and usability enhancement: do not disable
the controls under the radio button when the latter is deselected.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CP-30958: Initial implementation of the Conversion Manager in XenCenter.
* Corrections following review and improvements.
* Further corrections and improvements.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
The blurbs should be user-centric rather than developer-centric.
No need to disable the page controls in the absence of signature/manifest
since the whole page becomes disabled in that case.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Verification of appliance files in chunks to avoid StreamTooLong exception.
- Disposal of HashAlgorithms and X509Certificates after use.
- General code simplification.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Made storage selector blurb for XVA import a bit more informative.
- A simple checkbox for starting the new VMS on the finish page is adequate.
- Typos. Property modernisation.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- When asserting if a VM can be migrated to a pool we don't have to check all the hosts in the pool at this point, we can enable the pool when we find the first host where migration is possible; we will check the rest of the hosts only if that pool is selected.
- If the destination pool is older than the source, then we don't need to do any server calls because we know that migration to an older host is not allowed.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- hide the boot mode control if there is only one option (BIOS boot);
- add text "(experimental)" to the experimental options (in the radio button text);
- if an option is disabled, then hide the experimantal warning, as there is already a note saying why it is disabled;
- more detailed experimental warning.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
(either when cancelling the wizard itself or exiting the application).
Implemented in the first instance for compiling the server status report.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Use two separate feature flags, `guefi` and `guefi-secureboot`, with the following rules:
- If the feature is disabled, then the option is hidden in XenCenter.
- If the feature is enabled and experimental, then the option is visible and a warning is displayed in XenCenter (in the New Vm and Import wizards).
Also show the reason why a boot mode option is greyed out (when the uefi/uefi-secure boot mode is not supported in the selected template).
(On the Page_InstallationMedia control, I moved the BootModeContol and PvBootBox controls inside the TableLayoutPanel, to allow better alignment and for better visibility in the design mode)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- In the New VM wizard, the boot mode control is only visible for Naples or greater hosts
- In the Import wizard, I had moved the boot mode options to a separate page, added after the target selection page, to allow the version check. The new "Boot options" page is only added for Naples or greater hosts.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- if a VM can migrate inside a pool, then we will allow it in the wizard, even if storage migration is not allowed
- If it is a intra-pool migration (without moving the disks), then use the VM migrate action (which does a VM.pool_migrate), not the cross pool migrate action.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-301156: VM created from disk import for a UEFI VM has missing values
Set default params when importing VHD
Signed-off-by: Tim Liu <tim.liu@citrix.com>
hidden and in all other cases it was set by the implementing control, i.e.
the label was not reusable, hence no reason to have it in the control and risk
layout issues. This means that the SrPicker does not need to be a control
encapsulating a CustomTreeVIew, but simply derive from the latter.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-297020: Do not download imported appliance on a modal dialog, but rather
asynchronously on the ImportSourcePage, so that the rest of XenCenter is usable
while the download is taking place; used the page's progress bar for this purpose
and removed the DownloadApplianceDialog.
* Corrections to the validation of the import source.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
having preselected a connection on the treeview. Also added a null check to
prevent crash if the connection is suddenly interrupted while moving away
from the select destination host page.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CP-28679: XC: Allow choosing boot options during disk import
Signed-off-by: Tim Liu <tim.liu@citrix.com>
* CP-28679: XC: Allow choosing boot options during disk import
1. Keep spaces instead of tabs
2. Update page header text to reflect the new control
3. Refine UI
Signed-off-by: Tim Liu <tim.liu@citrix.com>
asynchronously on the SelectImportSourcePage, so that the rest of XenCenter
is usable while the unzip is taking place; for this purpose a progress bar
was added on the page and the DecompressApplianceDialog was removed.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
PageLoaded override in derived classes, enforce it by wrapping the page specific
code in a new virtual method, which the derived classes can override and PageLoaded
can call after its own logic.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
override in derived classes, enforce it by wrapping the page specific code in
a new virtual method, which the derived classes can override and PageLeave can
call before its own logic.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-280329: Fix CrossPoolMigrateDestinationPage with Current Server showing
Signed-off-by: Kun Ma <kun.ma@citrix.com>
* CA-280329: Refine usage of CreateTargetServerFilterList
Signed-off-by: Kun Ma <kun.ma@citrix.com>
* CA-280287: Fix the null reference exception on the Import wizard
- Added a check so that we don't attempting to show the license warning if the wizard is open without a preselected host/pool.
- The license warning is now updated whenever the host selection changes; plus, we are not attempting to show it if the wizard is open without a preselected host/pool.
- Also a minor refactoring in the GlobalSelectHost page to fix this issue: when the wizard is open with a pre-selected host, we pass this to the page by assigning SelectedHost property, which in turn sets the m_selectedHost. The getter for SelectedHost resets m_selectedHost to the selected item in the host list. If the getter is used before the host list selection is updated, then the desired pre-selection is lost, because m_selectedHost is reset to null.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-280287: Corrections following code review
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CP-24709: Add a warning in the New VM wizard and Import wizard if the pool is licensed using XD/XA entitlement
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CP-24709: Add a warning in the New VM wizard and Import wizard if the pool is licensed using XD/XA entitlement
Fixed unintended designer code additions/changes
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
prevent them from being serialised alongside the API properties. This will also
be useful for moving the API bindings out of XenModel.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Added a new method in XenTabPage which the derived classes can implement to select a default control after the page is loaded.
- Added a new wizard test that runs through the wizard by pressing the Enter key and checks if it has landed on the right page.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
because the differentiation was in the filters, which can be passed in as parameters
to the base class, and other than this they were only adding complexity.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Expose both the HIMN network and any VIFs associated with the HIMN
network using XenCenter when the "View->Show Hidden Objects" option
is displayed. However the shown HIMN should not be able to autoplug,
edit or delete.
Mostly just terminology changes from home server to target server in the CPM wizard. Changes in shared component SelectMultipleVMDestinationPage (shared with ImportWizard) to allow CPM wizard to rename the Home Server column (as it can the VM/template one - using the same pattern).
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
FolderBrowser dialogs. Fixed text which caused label to look unaligned. Prevent
crash when attempting to launch the DownloadAppliance dialog with "http://" as URI.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
We observed that some threads can reach deadlock-ish state after they have Invoked into a control's UI thread. When it happens they are all in a waiting for join or in sleep state for very long time, although there should not be any deadlock situations.
It seems this has something to do with multiple parent controls and with which control we invoked on. This should not make a difference, because we have got one UI thread (for MainWindow) they should wait for, but we have seen it does.
The solution that fixed this issue was to invoke on the MainWindow instead of various controls (see a4fe507adf ).
This changeset is changing all our Invokes to invoke into MainWindow
instead of a control itself. (MainWindow's UI thread is the only UI thread
all Control is using in XenCenter)
This changeset should be in place until we have found the root cause or the exact reason for the above.
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1376062101 -3600
# Node ID e9a03389b4dfd447a4034b55d74827d30e3950be
# Parent d0a3fa6db59fcaea186f0909053866153d15d450
CA-112877: Set the description text of the transfer VM network page when the export/import
mode is set ratehr than when the page is populated to avoid refreshing issues. Also,
fixed string formatting issue which could potentially cause problems with the word
order in languages other than English.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
NewAction to use the Action<ActionBase> delegate instead of EventHandler. Thus
there is no need to fire them with Empty or null EventArgs and on several occasions
we avoid casting objects in the event handlers.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
