- in the ConfigurePvsSiteAction, we now check if a site still exists, before trying to configure it
- added a CollectionChanged event handler in the Cache configuration dialog, and if we observe that a site has been added, we add it to the dialog as a new page
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Using new XAPI functionality in Install Update Wizard required by the new packaging format (ISO updates)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- If the PVS site cannot be removed (it has running proxies) then popup a dialog stating the reason, instead of starting the action and failing there. We still have the same check in the action, just in case the situation changed in the meantime.
- Removed unused controls
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
PVS Tab:
- Move the "View PVS sites" button inside the "Configure PVS Cache" dialog (next to Remove button) and make it per-site (showing only the PVS servers from that site)
- Remove "Currently attached" column from the VMs section
- Rename "Status" column to "Read caching status"
Configure PVS Cache" dialog:
- Make sure there is a scrollbar to accommodate all hosts in a pool
- Add a confirmation dialog when a site is removed. The action is executed when the Remove button is pressed.
- When Memory SR is selected, set the maximum value to the dom0-extra-memory..
- Allow empty configuration (but see next point): The OK button should only be disabled if the PVS site name is empty
- Add an extra option in the "Cache storage" combobox, with text "Not configured", selected by default on a new site. When this is selected, we will remove the existing entry in pvs_cache_storage and will not create a new one.
- When a PVS site is deleted (forgotten), we first delete all the associated PVS_servers, otherwise the site cannot be deleted.
as move (halted) or migrate (suspended) destination; this was caused by using the
VM's resident_on instead of Home() host. Also, changed the disabled reason to be
a bit more generic and cover cases other than migration.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Allow move of multiple VDIs
- CA-187659: show better messages when batching move/migration of multiple VDIs.
- Show different tooltips for single vs. multiple VDI move/migration/deletion.
- Refactored the MoveDiskDdialog. Removed the inherited class VDIMigrateDialog and
the batching manager as it was not very different from its parent, it was registering
the events twice, and was batching migration of even single VDIs.
- Tidied up the Move- and MigrateVirtualDisk commands so they're easier to compare.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- new image for PVS_site
- added cache size restrictions based on the SR selected
- added button to remove the PVS site on the page
- fixed the error where the subtext for a new PVS sites showed as "Not configured" even after it has been configured
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CP-16922: UI changes to PvsPage to replace the single configure button with a separate enable and disable one, per the design doc
* CP-16922: Intermediate checkin - command + dialog implemented, but PVS page has some layout problems.
* CP-16922: Implement GUI for enabling PVS read caching and marking/unmarking VMs for prepopulation
Fix the broken layout by reverting MainWindow.resx (which shouldn't have changed) back to the previous commit. Also removed duplicate properties button code.
* CP-16922: PVS Page changes, to properly display all VMs (not just ones with proxy), only populating proxy columns if there is a proxy set.
* CP-16922: Use a CommandButton for the enable button, connected to the same command as the VM main menu button, and using the table selection as its selection manager.
* CP-16922: Delete the old enable button click behaviour (because it now has a proper command), was causing the dialog to show up twice
* CP-16922: Properly list VMs by hiding those that should be hidden (in addition to non-VMs, also hide the __gui__ prefix and others covered by Show function). Also fixes a bug in NewVMGroupVMsPage discovered when fixing this - it would show VMs that should be hidden if you used the search bar.
* CP-16922: Use ButtonText on the Command to set the text on the PVS enable button
* CP-16922: Add the disable PVS read-caching command, and its associated proxy destroy action. Both based off enable equivalents (main difference is no dialog for now). Not used yet but will be in main window menu + disable button
* CP-16922: Add disable PVS read-caching to the main window menu (under enable), with the disable command attached to it
* CP-16922: Add support for disabling PVS read-caching for selected hosts via the PVS tab page by converting the disable button into a CommandButton in the same way as the enable button, using its own command + selection manager (because Selection Managers only bind to one control)
* CP-16922: Design - adding the "read caching enabled" column from the design, so that we display both whether caching is enabled and whether the VM is currently cached. If it's disabled all other values are missing.
* CP-16922: Add the PVS site column per the design to show the site a VM's PVS Proxy is on if it has a proxy
* CP-16922: Add an event handler for VMs changing so that newly provisioned VMs immediately show up in the PVS tab page
* CP-16922: Support for properly remembering the selection when the VM list is refreshed. A new method returns the list of VMs for the selected rows, and we can then check if the VM for the row being added is in this list. If there was no previous selection then we still select the first row by default.
* CP-16922: Remove prepopulate, which is being removed from the design. The next XAPI version will remove it, so just pass False as prepopulate for now, and remove the option from the dialog and PVS tab page.
* CP-16922: Improve UI appearance for a missing Storage Repository. Per the design, if there is no SR show the message None (memory only) instead of an empty cell
* CP-16922: Improved sorting behaviour. All columns (except VM name, which always uses it) use the VM tag as a sorting fallback (since they all have duplicates). New default sort which sorts by caching enabled first (yes before no), and then VM tag as a tiebreaker. Support for remembering the current sort on refresh, ie when a value changes.
* CP-16922: Refactoring to use a VM extension method to get the PVSProxy (or null if none exists) for a VM. This was used in the PVS Page + commands which are now much simpler.
* CP-16922: Move where the SelectionChanged event handler is set when refreshing the PVS table, so that the command buttons are updated correctly.
* CP-16922: Improvements to PVS read-caching dialog. Set accept/cancel buttons properly + adjust tab values, so focus acts as expected
* CP-16922: Remove the images from the menu for Enable/Disable PVS read-caching, most commands in the menu don't have one
* CP-16922: Sorting out the strings for the actions + ParallelAction calls, and moving them into the resx. Also reverting wrong MainWindow.resx changes.
* CAR-2184: XAPI changes. I've made the minimal possible changes to PvsPage to ensure it compiles, but it's had a lot of feature work (CP-16922) that supersedes this, these small changes should keep that merge painless.
* CAR-2184 XAPI: Reverse the unrelated changes, only keep the PVS ones.
* CP-16922: Merge latest XAPI changes, notably changes to Pvs_site.create
* CP-16922: Change tab show/hide logic for PVS tab, show it even if there are no PVS sites.
* CP-16922: Implement GUI for enabling PVS read caching
Design changes - remove the storage repo column and replace it with status, which is populated with a friendly version of the pvs_proxy_status enum. Also populate site list using site.name_label
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* CP-16922: Implement GUI for enabling PVS read caching
Adjusting the CanExecute of Enable PVS read-caching command to require at least one PVS site to be created. Since the PVS tab can show up without any sites, we need this because we can't create a proxy without a site.
* CP-16922: Code review changes.
Tidied up messages, and ensured actions run async properly, and without exiting before their task.
* CP-16922: Code review changes.
Update dialog resx, wider combobox on dialog, update action descriptions before setting RelatedTask, add friendly message body for PVS error notifications.
The else if (vm.power_state == vm_power_state.Suspended) block had been incorrectly moved out an indent level to the outer if.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
Where we have a host the VM is running on (ie vm.resident_on is not null) at the time it is reverted, attempt to start/resume on that host if possible, instead of the home server of the VM.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* CAR-2184: XAPI changes. I've made the minimal possible changes to PvsPage to ensure it compiles, but it's had a lot of feature work (CP-16922) that supersedes this, these small changes should keep that merge painless.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* CAR-2184 XAPI: Reverse the unrelated changes, only keep the PVS ones.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
We already renamed the column to target server, this changes the message in the case where the user doesn't choose a server on this page to also use target server.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
Adjusted messages, and added a tooltip to the Automatic restart radio when it's disabled. Also now support standalone hosts in addition to pooled.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
Expose both the HIMN network and any VIFs associated with the HIMN
network using XenCenter when the "View->Show Hidden Objects" option
is displayed. However the shown HIMN should not be able to autoplug,
edit or delete.
- Immediately complete the ParallelAction when there are no subactions to be executed, to avoid on infinite lock while waiting for the actions to be completed.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
If we are expecting to live patch, but at the end
hosts.patches_requring_reboot contains the patch, then warn the user that
live patching has failed for the host - and it needs to be rebooted.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
- when the cd drive or the tools iso cannot be found, the action should fail.
- if the tools SR is broken, do not show the error on a pop-up because the UX is
bad when installation is attempted on multiple VMS.
- added one more entry to the list of possible tools iso names.
- small performance improvement.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Generalising to also support pools. New CheckHostPatchesRequiringReboot method with the same behaviour as old method (return list of KeyValue warning messages). Pool updates on Ely use the union of messages from this method instead of the old one. Also localised the "{hotfix} on {server}" string per todo (hence resx changes).
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
- Made the action PureAsyncAction, so that it automatically checks if the current user can perform all the necessary api calls
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Mostly just terminology changes from home server to target server in the CPM wizard. Changes in shared component SelectMultipleVMDestinationPage (shared with ImportWizard) to allow CPM wizard to rename the Home Server column (as it can the VM/template one - using the same pattern).
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
Fixed test:
1) Test Failure : XenAdminTests.UnitTests.MiscTests.NamesAndMessagesTests.XapiFriendlyNameStaticMethodsReturnStrings
Null value returned for get_SR_BACKEND_FAILURE_457
Expected: not null
But was: null
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
This means that if license_params doesn't contain this key we consider it restricted.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
- Moved progress bar at the bottom of the page and made it the same height as on Upload page; This progress bar is now used when the prechecks are performed (existing functionality) and also for the "resolve" actions (new functionality).
- Added a label for displaying action progress.
- The icon and label saying that you need to resolve problems is hidden when there are no issues found and when an action is in progress (when the progress label is shown instead).
- When a resolve action is in progress, all controls on the page are disabled, apart from Cancel; pressing Cancel will cancel the "resolve" action and the wizard.
- Also put everything in a TableLayoutPanel (hence all the designer changes)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Add the Live Patching tab as a new part of PropertiesDialog, shown for pools and standalone hosts. Tab contains one checkbox which toggles the live_patching_disabled XenServer API property. Not yet implemented: license check ("The option should only be shown if the pool is licensed")
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
Partially upgraded pools are not supported. If the versions of servers mismatch in a pool, Automatic updating will be disabled with the appropriate info message.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
even when automatic mode was supported for them. The problem was that the xenserver
versions were not retrieved from the DownloadUpdatesXmlAction once the latter had run.
Also, minor refactoring.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Added Control Domain memory entry in the host memory control on Memory tab.
- Control domain memory is editable for Ely and greater hosts.
- Can be changed from a dialog that requires host to be in maintenance mode and triggers a host reboot after the memory is changed.
- This dialog is available from Server main menu and from the host memory tab.
- Also removed unused unit controls on host and VM memory bars.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Fixed the way we calculate PercentComplete for ParallelAction: use the sum of actions in actionsByConnection and actionsWithNoConnection instead of subActions.Count, to avoid waiting for the completion of actions that we never start, because we exclude actions with disconnected connections from actionsByConnections
If there is no <minimalpatches /> tag, the version is not supported. This check has priority over licensed state when displaying the reason why a server is not supported.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Implemented pre-check to check whether there is enough free disk space
before starting updating a pool.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
more obvious to the user that they can edit it. To this purpose change the button
Properties to Edit (and do the same on the Networking page for consistence). Also
show the name of the disk (ellipsized if too long) on the wizard's finish page.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- The multiple action is cancellable if is at least one sub action is not completed
- When a multiple action is cancelled, we try to cancel all sub actions that are not completed
- Also changed the way we calculate the percent complete for the parent action, to report partial progress of the sub actions
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changed message to "Deleting update installation file ..." to match wording in previous page of the wizard.
Signed-off-by: Frezzle <frederico.mazzone@citrix.com>
Removed unused properties.
Added new string resource to set the pvs farm dialog's title.
Extended XenAPI's PVS_farm class to override Name property to allow for simpler sorting code.
Removed embedded icon in resource file; dialog now inherits the application's icon.
Signed-off-by: Frezzle <frederico.mazzone@citrix.com>
FolderBrowser dialogs. Fixed text which caused label to look unaligned. Prevent
crash when attempting to launch the DownloadAppliance dialog with "http://" as URI.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Changes following code review
- Made PVS tab localizable and added Chinese and Japanese resources
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
title so we can tell the one from the other. For consistency I used a format similar
to Import/export XVA. I also removed the gerund from the latter as it cannot be
used when the action is completed.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
XenCenter no longer ignores checking if the master host already has the specified patch applied; it now checks before trying to apply it, which means we get no error in the Patching Wizard's Patching Page.
Signed-off-by: Frezzle <frederico.mazzone@citrix.com>
Replaced the call to Task.destroy() with the DestroyTask() method, which additionally sets RelatedTask to null. This ensures that we stop polling the task for its progress and report the error.
- tab visible on pool or standalone server if the feature is not restricted and the pools has at least one farm
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Replaced the call to Task.destroy() with the DestroyTask() method, which additionally sets RelatedTask to null. This ensures that we stop polling the task for its progress and report the error.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- removed unnecessary casts
- no need to catch exception only to rethrow it; do not interrupt the call stack by using "throw ex"
- redundant check and value setting
Assigned Proxy property in all WebClient, WebRequest and HttpWebRequest instances.
Removed "proxy not supported" message from Download Appliance dialog, since the download does work with a proxy.
Signed-off-by: Frezzle <frederico.mazzone@citrix.com>
Added comment on why we don't use StreamReader, for future reference.
Changed lambda syntax to more compact version, for readability.
Signed-off-by: Frezzle <frederico.mazzone@citrix.com>
- For Dundee and newer hosts: the feature is restricted only if the "restrict_ssl_legacy_switch" flag exists and it is set to true
- For pre-Dundee hosts: the feature is restricted if the "restrict_ssl_legacy_switch" is absent or it is present and set to true
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Moved MD5Hash function from EncryptionUtils to HTTP class.
Replaced unnecessary new string/List-related functions with existing methods.
Removed redundant string.IsNullOrEmpty() call.
Changed duplicate hotkey in Connection Options page.
Signed-off-by: Frezzle <frederico.mazzone@citrix.com>
VM with the hci-warn-before-shutdown flag. Minor changes to make the warnings for
rebooting and shutting down more consistent (preselect the No button for rebooting;
extended the Yes button text; modified warning text)
Now transfers proxy credentials in encrypted format and checks for default empty credentials when loading them for first time.
Fixed a break in unit test in HTTP.ReadHttpHeaders().
Signed-off-by: Frederico Mazzone <fredericom@citrite.net>
[CA-211369] Console switching when snapshot completes
ConsolePanel.setCurrentSource() being called in ConsolePanel.Snapshot() was causing the console view to switch to the target snapshotted VM's console, but only if the user is already on a console tab. The screenshot now happens before the snapshot begins, instead of after; this way, the screenshot always occurs when not on the console tab.
Signed-off-by: Frederico Mazzone <fredericom@citrite.net>
Removed last bits of code relating to "Bypass proxy server for local addresses" option.
New proxy settings are sent from XenCenter to health check service and used to configure the proxy using GetProxyFromSettings().
Health check service now correctly saves its proxy settings and updates the static Proxy property for the Session class; done in new ReconfigureConnectionSettings().
Signed-off-by: Frederico Mazzone <fredericom@citrite.net>
Added 2 textboxes for proxy username and password; encrypted when saved and decrypted when loaded.
Added 2 checkboxes; one for bypassing proxy for xenserver connections, one for providing proxy credentials.
Removed checkbox for bypassing proxy for local addresses.
Controls are no longer enabled/disabled when the related proxy option is selected/deselected.
Making changes to a control (e.g. username, bypass checkbox, etc) selects the 'Use this proxy server' option automatically.
Removed "Bypass proxy server for local addresses" option.
Basic and Digest authentication implemented. Tested with FreeProxy (Basic+Digest), CCProxy (Basic) and AnalogX Proxy (no authentication); each were tested with correct credentials, incorrect credentials and missing credentials; all gave expected results.
Signed-off-by: Frederico Mazzone <fredericom@citrite.net>
If the license does not allow VM migration, then cause the VMs to be shut down / suspended on the pre-checks page
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changed heading from Recommended Updates to Required Updates following further discussions around wording
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Showing recommended* hotfixes for servers when the data is available (Check For Updates xml has been downloaded and has minimalPatches node in it for the given server version). *:Not applied ones from the minimal set.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CA-77990: Report required actions for all VMs at once in the hotfix wizard / RPUW
* CA-77990: Resolve precheck problems in parallel in the Patching wizard
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-77990: Resolve precheck problems in parallel in the Patching wizard
Changes following code review: Made the ParallelAction work across connections and removed CrossConnectionParallelAction
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-77990: Modified ParallelAction to create queue on RunSubActions only, with the correct queue size
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Added support for defining custom update.xml location in Registry. This
can be either a local file or an URL. This will be beneficial when testing XenCenter.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Changed the FolderAction class so that it can be used to delete or move multiple folders across connections, instead of having multiple actions (one for each holder) which can not run in parallel.
- The api calls that update the EMPTY_FOLDERS entry in pool's other_config are preformed last for all connections, avoiding cross-thread exceptions when two threads try to add/remove the same key.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Calling disable as best effort. (We always call disable AD before enabling AD - CA-48122)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
DownloadUpdatesXmlAction is called on PageLeave and not when the user selects Automatic Mode. This way we get the error message at the right time, also showing a progress dialog what makes the UX much better.
New tooltips for servers on the Select Server Page to to cover two more cases
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
My commit fixes the error message so the dialog will show "Could not create SSL/TLS secure channel." instead of "An unknown error occurred". This text is localised.
Unfortunately we see only a WebException with Status=SecureChannelFailure with no other details - couldn't provide an improved error message
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Added AD-related strings to japanese and chinese resource files; still need translation.
Changed F1/Help mapping of the AD upsell tab to go to the 'Managing Users' help page.
Signed-off-by: Frederico Mazzone <fredericom@citrite.net>
Implemented error handling.
If there has been an error in a pool, we stop executing actions in that pool immediately, and report the error once every other actions have finished. Error in one pool will not affect the upgrade process of other pools.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Try to get the analysis progress from cis (as an integer value representing percentage 0 - 100). If this function returns a valid progress less than 100, then we don't try to get the report analysis and continue to display "Analysis not yet available"
- If the progress is 100 then we get the analysis result and display it
- If the progress cannot be obtained, then we try to get the analysis result; If an empty result is obtained within 10 minutes from the upload completion, then we assume that the analysis is still in progress and continue to display "Analysis not yet available"
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Check different feature flag for Windows VMs on Dundee to detect Dundee guest agent. For earlier versions nothing is changed.
This will cause XC to report "Management not installed" for Windows VMs on Dundee hosts with Cream guest agent (This is the case when a host has been upgraded from Cream to Dundee).
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Added a Precheck to the RPU wizard, to check if the hosts in the pool have different CPU feature sets (using the old feature check for pre-Dundee pools) and display an error, offering to shut down all VMs.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
XAPI expects "OpaqueRef:NULL" in the value field to unassign a VM from
a particular policy, however XC is sending an empty string "". As a fix
the empty string is replaced with Helper.NullOpaqueRef.
Signed-off-by: Sharath Babu <Sharath.Babu@citrix.com>
Disableded non-required pages in the wizard
Added placeholder for new pages
Changed sequence of pages
Removed unnecessary code
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Intra pool migration should be restricted only if the "restrict_xen_motion" key exists and it is true, as this license key has been introduced in Dundee and therefore pre-Dundee hosts won't have it
Signed-off-by: Mihaela Stoica <Mihaela.Stoica@citrix.com>
