Removed ApplyLicenseEditionCommand as it was unnecessary (there was no
button/menuitem calling it). Use the ApplyLicenseEditionAction instead.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- CA-359068¨Match the whole datasource name (previously the wrong one was picked
for disk read/write latency).
- New/edit Graph dialog: differentiate between enabled/disabled datasources and
visible/hidden (known/unknown units; the latter may mean no data).
- Some refactoring.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-34231: Replace negative language with `block list` in code and references
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `stop` in code and references
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `freezing` in code
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run/ran` in code comments
Some paramater mentions have been renamed, as they will be renamed in future commits.
Excluded mentions in XenAPI/Host.cs and XenAPI/VM.cs since code is autogenerated.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# CFUValidator/CommandLineOptions/CFUCommandLineOptionManager.cs
# XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
# XenAdmin/Dialogs/Wlb/WorkloadReports.cs
* CA-34231: Replace negative language with `run` in Command.cs Run method
Used Resharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/TabPages/GeneralTabPage.cs
* CA-34231: Replace negative language with `run` in Command.cs CanRun method
Used Resharper rename utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs CanRunCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/DRConfigureCommand.cs
# XenAdmin/Commands/DRDryrunCommand.cs
# XenAdmin/Commands/DRFailbackCommand.cs
# XenAdmin/Commands/DRFailoverCommand.cs
# XenAdmin/Commands/DisasterRecoveryCommand.cs
# XenAdmin/Commands/VMGroupCommand.cs
* CA-34231: Replace negative language with `run` in Command.cs RunCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs GetCantExecuteReasonCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs GetCantRunReasons method
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in Command.cs
Also applied to related symbols. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in methods named CanRun
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in methods in CrossPoolMigrateCommand.cs
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/CrossPoolMigrateCommand.cs
* CA-34231: Replace negative language with `run` in remaining Run methods
Also updated negative language in `DeleteVMCommand`
Also updated in comment in `CrossPoolMigrateCommand`
Also renamed missed instances of `CanRun`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in `CanRunCore` and `RunCore`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in Commands folder
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in XenAdmin/Controls folder
Used ReSharper renaming utility. Had to rename `WlbReportView.xs:RunReport()` to `WlbReportView.xs:StartRunReport()` to resolve conflict with change from `WlbReportView:ExecuteReport()` to `WlbReportView:RunReport()`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
# XenAdmin/Dialogs/Wlb/WorkloadReports.cs
# XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs
* CA-34231: Replace all remaining negative language with `run` in code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/Controls/WlbRecommendations.cs
# XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs
# XenModel/WLB/WlbScheduledTask.cs
* CA-34231: Replace negative language with `supporter` or `bond member` in code strings
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `supporter` or `bond member` in Messages string
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/MainWindow.cs
# XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace remaining negative language with `supporter` in .resx files
Used ReSharper renaming utility. FriendlyErrorNames.resx has been excluded.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `supporter` or `bond member` in XenAdmin code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace negative language with `supporter` or `bond member` in XenModel code
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in CFUValidator code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# CFUValidator/CFUValidator.cs
* CA-34231: Replace negative language with `coordinator` in solution's comments and hardcoded strings
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `Helpers:GetCoordinator` method
Used ReSharper renaming utility.
also renamed similarly named method in `ObjectChange.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Alerts/Types/HotfixEligibilityAlert.cs
# XenAdmin/Controls/CustomDataGraph/ArchiveMaintainer.cs
* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`
Used ReSharper renaming utility. Excluded jp and zh resources
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/EvacuateHostDialog.resx
* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`
Used ReSharper renaming utility. Excluded jp and zh resource files.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.resx
* CA-34231: Rename missing language references for change to `coordinator`
Misc files were not saved before last commits.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `Messages.resx`'s code
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/HACommand.cs
# XenAdmin/TabPages/AdPage.cs
# XenModel/Actions/Network/CreateBondAction.cs
# XenModel/Actions/Network/NetworkAction.cs
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace negative language with `coordinator` in `ExternalPluginAction.cs`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`
Used ReSharper renaming utility. Also replace negative language in missed comment in `ExternalPluginAction.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/AddHostToPoolCommand.cs
# XenAdmin/Commands/HACommand.cs
* CA-34231: Replace negative language with `coordinator` in `Helpers.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `NetworkingHelper.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `PoolJoinRules.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`, `Controls`, and `Core`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/AddHostToPoolCommand.cs
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Diagnostics`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Dialogs`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenAdmin`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/MainWindow.cs
# XenAdmin/TabPages/GeneralTabPage.cs
# XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeExtrasPage.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizard.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizardPrecheckPage.cs
# XenAdmin/XenSearch/Columns.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenModel\Actions`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenModel/Actions/Network/CreateBondAction.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenModel`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative strings with `main` in `Messages.resx`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace remaining negative string names with `main` in `Messages.resx`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs
# XenModel/Messages.resx
* CA-34231: Rename dialogs to replace negative connotations with `main`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `SaveAndResoreOptionsPage.cs`
Also updated its resx file. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs
* CA-34231: Fix invalid reference in `SaveAndRestoreOptionsPage.Designer.cs` after renaming
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `EnterMainPasswordDialog.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `ChangeMainPasswordDialog.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Fix invalid reference not changed after renaming `EnterMainPasswordDialog.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `main` in `XenAdmin/Dialogs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Update class names in HelpManager.resx
Following renaming of main password dialog. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `Metadata.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Remove remaning negative language with `coordinator` from `Messages.resx`
Used ReSharper renaming
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Remove remaning negative language with `other pool member` from `Messages.resx`
Used ReSharper
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language in solution
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Remove commented out code in VNCGraphicsClient.cs
Code has only been improved partially as it's not strictly relevant to the PR
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend negative word replacement in XSVNCScreen.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Simplify debug call formatting in NewPoolDialog.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Add code mistakenly removed in MainWindow.cs
Removed as part of `f155f9c8`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Revert renaming of constant related to Windows' API
Considered external to CH Center
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend hotkey for Coordinator field in `NewPoolDialog`
Previous ALT+<key> hotkey was conflicting with CreatePool
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Remove unecessary whitespace in EvacuateHostDialog.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Update if block to exclude unecessary else in DRFailoverWizard.cs
Not relevant to the PR, but the change is small enought to no need extra testing
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend typo in PoolJoinRules.cs
supporer -> supporter
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace missing negative language with `coordinator` in `XenAPI-Extensions/Pool.cs`
Variables and methods XenAPI-Extensions were mistakenly skipped
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace negative language in `XenApi-Extensions` with `coordinator/interface`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace negative language in `XenApi-Extensions` with `supporter/member`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace remaining negative language in `XenServerHealthCheckBugTool.cs`
This is only used to format the string
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Change line-endings to CRLF in `Page_CloudConfigParamters.cs`
Done in order to fix merge conflict into master
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend misc negative language renaming typos
`XenServerHealthCheckBugTool` and `XenServerHealthCheckService`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
- Moved the business logic classes to XenModel close to their base class.
- Moved WorkloadReports dialog close to the other WLB dialogs.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, NoTargetServerPoolItem class should be private to the SelectMultipleVMDestinationPage
because it is not used anywhere else.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
For reasons of code reduction and also because the look and feel of this dialog
was slightly different from the usual application pop-ups.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CP-35838: Add health check precheck into RPU wizard
* CP-35838: Add disable Health Check in RPU precheck warning
Signed-off-by: Ji Jiang <ji.jiang@citrix.com>
Not sure why I had added that since the containing protected method is probably
more relevant as a static method in the Problem class.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* Hid properties from the designer and renamed them because they give the wrong impression.
* Fixed some inefficiencies around the NetworkComboboxItem.
- Move NetworkComboBoxItem into the NetworkComboBox class.
- Moved XenAdmin.Dialogs.NetworkComboBoxItem into the VIFDialog class and made it
private to avoid ambiguousness with the public XenAdmin.Controls.NetworkComboBox.NetworkComboboxItem.
- Create a NetworkComboBoxItem only if needed and assign its name at construction time.
- Add method to select a NetworkComboBoxItem and property to return the SelectedNetwork.
* CA-339233: Do not allow selection of networks while they're locked.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Previously this was not possible due to XenModel-XenOvfTransport cyclical references.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-343763: Corrected the handling of VMSS alert priority/severity according to CA-342874.
- Distinguish between warnings and errors.
- Made PolicyAlert derive from MessageAlert to conform with other alert types.
- Replaced EventType column by a simple image column because it adds to clatter
without really offering useful information.
* Correction as per code review.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* Replaced LicenseWarningDialog with a simple WarningDialog.
* Replaced VcpuWarningDialog with a simple WarningDialog.
* Replaced RemoveCrashdumpsWarningDialog with a simple WarningDialog.
* Replaced UsbUsageDialog with a simple WarningDialog.
* Replaced WlbDeleteReportSubscriptionDialog with a simple WarningDialog. Added null checks to event invocation.
* Replaced DisableWlbDialog with a simple Warning dialog.
* Replaced ConnectionRefusedDialog with a simple Error dialog.
* Replaced UserDeviceDialog with a simple Warning dialog.
* Replaced RevertDialog with a simple Warning dialog.
* Removed unused dialogs.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Since the standalone VNC control was removed, the VNC code has been used only by
the UI project. According to Microsoft's performance guidelines large single
assemblies are preferable to multiple smaller ones.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
This fixes various workflow bugs and disallows re-attaching GFS2 SR if clustering
is disabled.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
