* [CA-233454] PVS tab doesn't show a new VM when it's created
Refined the rules for not adding a VM to the table, if it is a template (thus not_a_real_vm), and it has the __gui__ prefix (thus hidden), we still add it, but hide it.
When its name is changed (to remove the __gui__ prefix), we update its name and re-calculate whether it should be visible (in the case of a new VM this will be true once the __gui__ prefix is gone). Also resort the table if a node changes from hidden to visible, because it appears as an addition to the table.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* [CA-233454] Update criteria for VM visibility to include is_a_real_vm
is_a_template is changed before the name_label removes the __gui__ prefix, so this works with no other changes to the vm property changed event.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* [CA-233454] Update when the VMs are shown in the PVS list
New observable property IsBeingCreated for VMs, set to true when they're made a hidden object, and false when they're removed from hidden objects (both in CreateVMAction). In the PVS Page when this is set to false, we re-evaluate whether a VM can be shown. This means that new VMs show here at the same time they're added to the tree (only different is tree refresh time), instead of far earlier (and before their networks were added).
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* [CA-233454] Set IsbeingCreated in the CreateVMFastAction
* [CA-233454] Properly support the VM Fast Create action
Further changes to CreateVMFastAction, to ensure it works with PVS tab - use the __gui__ prefix when the VM is created and then change it back just before showing.
* [CA-233454] Small logic adjustments/tidying up
We have some new RRDs - read, write, read_latency and write_latency. This adds support for them by adding a friendly name and using it to display them. It also adds some filtering (see GraphHelpers.cs) because for backward compatibility io_throughput_read and io_throughput_write (which differ from read and write only in scale) are still available, but shouldn't be displayed in XC. If the new read or write are available, we filter these old datasources out.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* CP-16922: UI changes to PvsPage to replace the single configure button with a separate enable and disable one, per the design doc
* CP-16922: Intermediate checkin - command + dialog implemented, but PVS page has some layout problems.
* CP-16922: Implement GUI for enabling PVS read caching and marking/unmarking VMs for prepopulation
Fix the broken layout by reverting MainWindow.resx (which shouldn't have changed) back to the previous commit. Also removed duplicate properties button code.
* CP-16922: PVS Page changes, to properly display all VMs (not just ones with proxy), only populating proxy columns if there is a proxy set.
* CP-16922: Use a CommandButton for the enable button, connected to the same command as the VM main menu button, and using the table selection as its selection manager.
* CP-16922: Delete the old enable button click behaviour (because it now has a proper command), was causing the dialog to show up twice
* CP-16922: Properly list VMs by hiding those that should be hidden (in addition to non-VMs, also hide the __gui__ prefix and others covered by Show function). Also fixes a bug in NewVMGroupVMsPage discovered when fixing this - it would show VMs that should be hidden if you used the search bar.
* CP-16922: Use ButtonText on the Command to set the text on the PVS enable button
* CP-16922: Add the disable PVS read-caching command, and its associated proxy destroy action. Both based off enable equivalents (main difference is no dialog for now). Not used yet but will be in main window menu + disable button
* CP-16922: Add disable PVS read-caching to the main window menu (under enable), with the disable command attached to it
* CP-16922: Add support for disabling PVS read-caching for selected hosts via the PVS tab page by converting the disable button into a CommandButton in the same way as the enable button, using its own command + selection manager (because Selection Managers only bind to one control)
* CP-16922: Design - adding the "read caching enabled" column from the design, so that we display both whether caching is enabled and whether the VM is currently cached. If it's disabled all other values are missing.
* CP-16922: Add the PVS site column per the design to show the site a VM's PVS Proxy is on if it has a proxy
* CP-16922: Add an event handler for VMs changing so that newly provisioned VMs immediately show up in the PVS tab page
* CP-16922: Support for properly remembering the selection when the VM list is refreshed. A new method returns the list of VMs for the selected rows, and we can then check if the VM for the row being added is in this list. If there was no previous selection then we still select the first row by default.
* CP-16922: Remove prepopulate, which is being removed from the design. The next XAPI version will remove it, so just pass False as prepopulate for now, and remove the option from the dialog and PVS tab page.
* CP-16922: Improve UI appearance for a missing Storage Repository. Per the design, if there is no SR show the message None (memory only) instead of an empty cell
* CP-16922: Improved sorting behaviour. All columns (except VM name, which always uses it) use the VM tag as a sorting fallback (since they all have duplicates). New default sort which sorts by caching enabled first (yes before no), and then VM tag as a tiebreaker. Support for remembering the current sort on refresh, ie when a value changes.
* CP-16922: Refactoring to use a VM extension method to get the PVSProxy (or null if none exists) for a VM. This was used in the PVS Page + commands which are now much simpler.
* CP-16922: Move where the SelectionChanged event handler is set when refreshing the PVS table, so that the command buttons are updated correctly.
* CP-16922: Improvements to PVS read-caching dialog. Set accept/cancel buttons properly + adjust tab values, so focus acts as expected
* CP-16922: Remove the images from the menu for Enable/Disable PVS read-caching, most commands in the menu don't have one
* CP-16922: Sorting out the strings for the actions + ParallelAction calls, and moving them into the resx. Also reverting wrong MainWindow.resx changes.
* CAR-2184: XAPI changes. I've made the minimal possible changes to PvsPage to ensure it compiles, but it's had a lot of feature work (CP-16922) that supersedes this, these small changes should keep that merge painless.
* CAR-2184 XAPI: Reverse the unrelated changes, only keep the PVS ones.
* CP-16922: Merge latest XAPI changes, notably changes to Pvs_site.create
* CP-16922: Change tab show/hide logic for PVS tab, show it even if there are no PVS sites.
* CP-16922: Implement GUI for enabling PVS read caching
Design changes - remove the storage repo column and replace it with status, which is populated with a friendly version of the pvs_proxy_status enum. Also populate site list using site.name_label
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* CP-16922: Implement GUI for enabling PVS read caching
Adjusting the CanExecute of Enable PVS read-caching command to require at least one PVS site to be created. Since the PVS tab can show up without any sites, we need this because we can't create a proxy without a site.
* CP-16922: Code review changes.
Tidied up messages, and ensured actions run async properly, and without exiting before their task.
* CP-16922: Code review changes.
Update dialog resx, wider combobox on dialog, update action descriptions before setting RelatedTask, add friendly message body for PVS error notifications.
- Added Control Domain memory entry in the host memory control on Memory tab.
- Control domain memory is editable for Ely and greater hosts.
- Can be changed from a dialog that requires host to be in maintenance mode and triggers a host reboot after the memory is changed.
- This dialog is available from Server main menu and from the host memory tab.
- Also removed unused unit controls on host and VM memory bars.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The restriction that Storage Motion was not possible in the presence of WLB has been removed in Dundee. This commit removes the check in XenCenter.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Fixed issues where total initial allocation for an SR was not calculated correctly. Also some minor improvements.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Creates a new function MemorySizeStringSuitableUnits that takes one more parameter that specifies the units that must be used when the number of bytes is 0.
Adds tab indexing to the control for allocation and changes label names.
Corrects mistake that led to exception being thrown when the Disk Size is decreased in the the New Disk Dialog.
- while upgrading a host, throw a HOST_OFFLINE ("Server could not be contacted") exception if the host can no longer be resolved (instead of HANDLE_INVALID)
- also corrected the parameters of the HANDLE_INVALID exception, as an extra parameter is needed for the friendly error name.
- in the UpdateManualHostPlanAction class I replaced Host with the private property _host in several places, so we are no longer trying to resolve the host each time we want to write something into logs
- added some null checks, to avoid reporting null reference exception
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- this applies to the Cloud-config page on the New VM Wizard and VM properties dialog.
- same for the container enlightenment page on the VM properties dialog.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
1.Add xapi version check in cream since Cream and Creedence have the same platform version
2.Check feature-ts2 to see if turn on RDP feature can use on specific VM PV tool
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
Changes following code review:
- Added VM.CanHaveVGpu function (at the moment just returns CanHaveGpu, but it will change in the future)
- Added vGPU_type.IsPassthrough function and used it everywhere we needed to test for passthrough (max-heads==0)
- Simplified code in Helpers.GpuCapability, Helpers.VGpuCapability, NewVMWizard (gpuCapability), MainWindow and GpuRow
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
New properties:
- Pool.HasGpu = Pool has at least one PGPU
- Pool.HasVGpu = Pool has at least one PGPU that HasVGpu
- PGPU.HasVGpu = PGPU has at least one supported_VGPU_type that is not pass-through
New or modified helper functions:
- Helpers.GpuCapability = GPU feature not restricted (by licensing) and Pool.HasGpu
- Helpers.VGpuCapability = vGPU feature not restricted (by licensing) and Pool.HasVGpu
- Helpers.ClearwaterSp1OrGreater = API version is 2.1 or greater
The GPU dialogs are displayed as follows:
- GPU page on VM properties dialog: Visible only if VM.CanHaveGpu and the GPU feature not restricted (by licensing)
- GPU page on New VM Wizard: Visible only if VM.CanHaveGpu and the pool has GPU capability (Helpers.GpuCapability)
- GPU page on Pool properties dialog: Visible only if the pool has vGPU capability (Helpers.VGpuCapability)
- GPU tab: Visible only if the pool has GPU capability (Helpers.GpuCapability) and is Clearwater SP1 or greater
- On the GPU tab, the "Placement policy" panel: Visible only if the pool has vGPU capability (Helpers.VGpuCapability)
- On the GPU tab, the "Edit" button on the "vGPU types" panel: Visible only if the PGPU.HasVGpu and vGPU feature not restricted (by licensing)
Also:
- VM.CanHaveVGpu function renamed to CanHaveGpu
- On the GPU tab, renamed "Allowed vGPU types" to "vGPU types
- The VLAN can be set to 0 only for Creedence or greater hosts on the vSwitch backend.
- When VLAN 0 is selected, an info is shown next to the control, saying "VLAN 0 will receive all traffic not on any other VLAN"
- Also fixed an error on New Network Wizard, where the "VLAN in use" message was still visible when changing the NIC.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
