Using new XAPI functionality in Install Update Wizard required by the new packaging format (ISO updates)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- If the PVS site cannot be removed (it has running proxies) then popup a dialog stating the reason, instead of starting the action and failing there. We still have the same check in the action, just in case the situation changed in the meantime.
- Removed unused controls
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
because the differentiation was in the filters, which can be passed in as parameters
to the base class, and other than this they were only adding complexity.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Allow move of multiple VDIs
- CA-187659: show better messages when batching move/migration of multiple VDIs.
- Show different tooltips for single vs. multiple VDI move/migration/deletion.
- Refactored the MoveDiskDdialog. Removed the inherited class VDIMigrateDialog and
the batching manager as it was not very different from its parent, it was registering
the events twice, and was batching migration of even single VDIs.
- Tidied up the Move- and MigrateVirtualDisk commands so they're easier to compare.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- new image for PVS_site
- added cache size restrictions based on the SR selected
- added button to remove the PVS site on the page
- fixed the error where the subtext for a new PVS sites showed as "Not configured" even after it has been configured
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CP-16922: UI changes to PvsPage to replace the single configure button with a separate enable and disable one, per the design doc
* CP-16922: Intermediate checkin - command + dialog implemented, but PVS page has some layout problems.
* CP-16922: Implement GUI for enabling PVS read caching and marking/unmarking VMs for prepopulation
Fix the broken layout by reverting MainWindow.resx (which shouldn't have changed) back to the previous commit. Also removed duplicate properties button code.
* CP-16922: PVS Page changes, to properly display all VMs (not just ones with proxy), only populating proxy columns if there is a proxy set.
* CP-16922: Use a CommandButton for the enable button, connected to the same command as the VM main menu button, and using the table selection as its selection manager.
* CP-16922: Delete the old enable button click behaviour (because it now has a proper command), was causing the dialog to show up twice
* CP-16922: Properly list VMs by hiding those that should be hidden (in addition to non-VMs, also hide the __gui__ prefix and others covered by Show function). Also fixes a bug in NewVMGroupVMsPage discovered when fixing this - it would show VMs that should be hidden if you used the search bar.
* CP-16922: Use ButtonText on the Command to set the text on the PVS enable button
* CP-16922: Add the disable PVS read-caching command, and its associated proxy destroy action. Both based off enable equivalents (main difference is no dialog for now). Not used yet but will be in main window menu + disable button
* CP-16922: Add disable PVS read-caching to the main window menu (under enable), with the disable command attached to it
* CP-16922: Add support for disabling PVS read-caching for selected hosts via the PVS tab page by converting the disable button into a CommandButton in the same way as the enable button, using its own command + selection manager (because Selection Managers only bind to one control)
* CP-16922: Design - adding the "read caching enabled" column from the design, so that we display both whether caching is enabled and whether the VM is currently cached. If it's disabled all other values are missing.
* CP-16922: Add the PVS site column per the design to show the site a VM's PVS Proxy is on if it has a proxy
* CP-16922: Add an event handler for VMs changing so that newly provisioned VMs immediately show up in the PVS tab page
* CP-16922: Support for properly remembering the selection when the VM list is refreshed. A new method returns the list of VMs for the selected rows, and we can then check if the VM for the row being added is in this list. If there was no previous selection then we still select the first row by default.
* CP-16922: Remove prepopulate, which is being removed from the design. The next XAPI version will remove it, so just pass False as prepopulate for now, and remove the option from the dialog and PVS tab page.
* CP-16922: Improve UI appearance for a missing Storage Repository. Per the design, if there is no SR show the message None (memory only) instead of an empty cell
* CP-16922: Improved sorting behaviour. All columns (except VM name, which always uses it) use the VM tag as a sorting fallback (since they all have duplicates). New default sort which sorts by caching enabled first (yes before no), and then VM tag as a tiebreaker. Support for remembering the current sort on refresh, ie when a value changes.
* CP-16922: Refactoring to use a VM extension method to get the PVSProxy (or null if none exists) for a VM. This was used in the PVS Page + commands which are now much simpler.
* CP-16922: Move where the SelectionChanged event handler is set when refreshing the PVS table, so that the command buttons are updated correctly.
* CP-16922: Improvements to PVS read-caching dialog. Set accept/cancel buttons properly + adjust tab values, so focus acts as expected
* CP-16922: Remove the images from the menu for Enable/Disable PVS read-caching, most commands in the menu don't have one
* CP-16922: Sorting out the strings for the actions + ParallelAction calls, and moving them into the resx. Also reverting wrong MainWindow.resx changes.
* CAR-2184: XAPI changes. I've made the minimal possible changes to PvsPage to ensure it compiles, but it's had a lot of feature work (CP-16922) that supersedes this, these small changes should keep that merge painless.
* CAR-2184 XAPI: Reverse the unrelated changes, only keep the PVS ones.
* CP-16922: Merge latest XAPI changes, notably changes to Pvs_site.create
* CP-16922: Change tab show/hide logic for PVS tab, show it even if there are no PVS sites.
* CP-16922: Implement GUI for enabling PVS read caching
Design changes - remove the storage repo column and replace it with status, which is populated with a friendly version of the pvs_proxy_status enum. Also populate site list using site.name_label
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* CP-16922: Implement GUI for enabling PVS read caching
Adjusting the CanExecute of Enable PVS read-caching command to require at least one PVS site to be created. Since the PVS tab can show up without any sites, we need this because we can't create a proxy without a site.
* CP-16922: Code review changes.
Tidied up messages, and ensured actions run async properly, and without exiting before their task.
* CP-16922: Code review changes.
Update dialog resx, wider combobox on dialog, update action descriptions before setting RelatedTask, add friendly message body for PVS error notifications.
XenCenter will check host.patches_requiring_reboot when a host restart is due while a batch update is in progress. If the restart is not required, XenCenter will skip relevant PlanActions.
The intention here is to check this whenever a restart is due according to the original schedule - this way a completely livepatchable update can prevent the restart while the key batch hotfixing logic is not changed.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Mostly just terminology changes from home server to target server in the CPM wizard. Changes in shared component SelectMultipleVMDestinationPage (shared with ImportWizard) to allow CPM wizard to rename the Home Server column (as it can the VM/template one - using the same pattern).
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
Add the Live Patching tab as a new part of PropertiesDialog, shown for pools and standalone hosts. Tab contains one checkbox which toggles the live_patching_disabled XenServer API property. Not yet implemented: license check ("The option should only be shown if the pool is licensed")
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
- Added Control Domain memory entry in the host memory control on Memory tab.
- Control domain memory is editable for Ely and greater hosts.
- Can be changed from a dialog that requires host to be in maintenance mode and triggers a host reboot after the memory is changed.
- This dialog is available from Server main menu and from the host memory tab.
- Also removed unused unit controls on host and VM memory bars.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Implemented pre-check to check whether there is enough free disk space
before starting updating a pool.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Changes following code review
- Made PVS tab localizable and added Chinese and Japanese resources
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- tab visible on pool or standalone server if the feature is not restricted and the pools has at least one farm
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Implemented error handling.
If there has been an error in a pool, we stop executing actions in that pool immediately, and report the error once every other actions have finished. Error in one pool will not affect the upgrade process of other pools.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Added a Precheck to the RPU wizard, to check if the hosts in the pool have different CPU feature sets (using the old feature check for pre-Dundee pools) and display an error, offering to shut down all VMs.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Disableded non-required pages in the wizard
Added placeholder for new pages
Changed sequence of pages
Removed unnecessary code
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Tried to keep changes at one place while not abstracting things too much as we have don't need any complex functionality yet.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- XenCenter build system picks up the RPU hotfixes from Artifactory
- RPU001 and RPU002 replace XS62E006 and XS65ESP1006
- Removed hotfixes from the solution, moved XS60E001 to Branding folder
- also cleaned up code in the HotfixFactory class, removing MNR and Cowley hotfixes (not supported anymore)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Revert "Merge pull request #708 from GaborApatiNagy/master_windows_update"
This reverts commit fe03f1382f, reversing
changes made to 423065a2c8.
Conflicts:
XenAdminTests/TabsAndMenus/MainMenuGeorge.cs
Implementing Upgrading VMs to Windows Update
New screen features:
-Create skeleton of the Upgrade VM dialog
-Implement a Go To Console link (just a link that opens a vm console)
-Implement logic to show the right status for a VM (includes rules to
get the states). Includes updating the dialog whenever the status changes.
-Add status texts to Messages, proper text on the UI
-Add stub methods to VM class in XenAPI-Extensions to r/w states from
Guest Agent
-UI: Implement rules what vms to display, checkbox rules, read only vms,
and when to enable the Upgrade button
-Implement Upgrade button (writes state for GA, mounts ISO) + maximum
parallel executions/actions
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Created ThinProvisioningParametersControl user control using existing code to have the thin provisioning settings at one place. It needs to be initialized by providing an SR and it will expose its internal state via NewSMConfig property that we need at other places.
This does not include refactoring of existing code or replacing existing code to use this new control, but the new Conversion dialog is using this. Next step would be to remove existing code and start using this new ThinProvisioningParametersControl instead.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Check call home enrollment status on connecting to a pool: If status is unknown it means that the pool is not enrolled (enabled) and has never been (disabled). If that's the case, then show the Health Check Overview dialog with the pool selected
- "Enroll now" on Health Check Overview will try enroll the selected pool into call home using existing token authentication. If this is not possible, then a dialog will be presented for the user to perform the initial authentication.
testSafe2Upgrade pugin function in prepare_host_upgrade.py is called as part of the RPU pre-checks
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
