Implemented error handling.
If there has been an error in a pool, we stop executing actions in that pool immediately, and report the error once every other actions have finished. Error in one pool will not affect the upgrade process of other pools.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Removed the first item instead of changing it - it is more logical to not to have it displayed here.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Re-position the version radio-buttons, so that is clear that the selected version applies to both Create and Reattach
- Pass the selected version to the attach command in the device_config parameter
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
When an exception is reported during the RPU, XenCenter tries to re-enable the host. But when this fails, we should just ignore it and report the original exception.
Signed-off-by: Mihaela Stoica <Mihaela.Stoica@citrix.com>
Disableded non-required pages in the wizard
Added placeholder for new pages
Changed sequence of pages
Removed unnecessary code
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Now we set Increment exactly as on other pages
when the unit is MB: the increment it will be calculated dynamically (1, 2, 4,...)
when GB, increment will be 1 GB for values >=10GB, 0.1GB otherwise
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Changes to the the layout: order of radio buttons, removed group box around the manual setting of shadow multiplier;
- Shadow multiplier edit box no longer disabled when "Optimize manually" not checked
- Also changed the wording on the Name page of the new VM wizard
- Added PoolPatchCleanAction which is called for each pool after the patch has been applied on all selected hosts
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Copy VM or Copy Templates wizard will point to the same help: "Copying VMs and Templates"
Migrate and Move VM will show: "Migrate Virtual Machines"
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- XenCenter build system picks up the RPU hotfixes from Artifactory
- RPU001 and RPU002 replace XS62E006 and XS65ESP1006
- Removed hotfixes from the solution, moved XS60E001 to Branding folder
- also cleaned up code in the HotfixFactory class, removing MNR and Cowley hotfixes (not supported anymore)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Fixed code to treat uuids of patches case-insensitive when consuming, but not changing them (eg. to lowercase) to keep compatibility with older XAPIs.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- InvisibleMessages.resx contains the default value for the update file extension (xsupdate), which can be overwritten in Branding.cs
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- The license restriction for vss snapshots already exists in trunk. This commit just amends the message displayed when the feature is not available.
Cherry picked from cream-indigo:
CA-190395: Replace the usage of FEATURE_NOT_AVAILABLE_NEED_ENTERPRISE_OR_PLATINUM_PLURAL
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
The restriction that Storage Motion was not possible in the presence of WLB has been removed in Dundee. This commit removes the check in XenCenter.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changes following code review:
* Disabled MTU control and added info label when MTU cannot be changed (due to Min==Max)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
I assumed the problem was that vm.resident_on is always unknown for stopped vms, but this is there intentionally to match only running vms and be always false for stopped ones. However, we still need similar logic to not to send VIF mapping when not needed in the assert.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Fixed filters that are used to determine whether a vm can be migrated to a destination or not.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Fixed how we set the Maximum for the dropdown controls on:
* Creating External network,
* Creating Bonds
pages on the New Network Wizard
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Now CrossPoolMigrateCanMigrateFilter can accept a parameter to decide whether to allow same target pool or not -- if allowSameTargetPool is false, it won't.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- rearranged the controls (removed group box, indented upload-related controls)
- also changed the progress bar style for the upload action to Marquee, as the Blocks style did not show any progress and it looked like the upload hasn't started
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Add Trim() to the instances where we check if the username is null or empty and also where we use it for authentication
- This applies to both XenServer username and Citrix username
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added Case Number edit box on the Destination page of the wizard
- valid case number needs to be 9 or less digits
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
In the RPU wizard, after we notice that the host has been rebooted we try to resolve the host from cache, but sometimes the cache is not populated at that point.
Then, because we cannot resolve the host, we cannot check the host version and we assume is a newer version (which might not be true).
This commit adds a call to retry to resolve the host (with timeout).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Fixed issues where total initial allocation for an SR was not calculated correctly. Also some minor improvements.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- removed unneeded code, as the item.OverCommit is set to None at the beginning of the function
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- renamed srSpace and srInitialSpace variables
- removed unnecessary checks for thin provisioned sr
- fixed some error on NewDiskDialog.SMConfig property (smconfig was wrongly populated based on controls enablement; the conversion to long was made before converting to bytes
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- If the new disks cannot be created because their total initial size is greater than the SR free space, then an error icon (with tooltip) is displayed and Next button is disabled.
- If the total size of the new disks is greater than the SR free space, but the disks can still be created (because the initial allocation is smaller), then a warning icon (with tooltip) is displayed and Next button is enabled.
- The tooltip mentions the initial space required for thinly provisioned SRs (initial allocation).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Not applied updates do not appear anymore in the General Tab of a pool. (Related to CA-180577)
- If we apply a patch that was already applied (happens when we take a file from disk that is not in the updates list taken from the Citrix website -> no metadata), on cancel we are now removing the uploaded patch from the host.
Changed all the health check actions to perform the necessary role checks
- HealthCheckAuthenticationAction: changed so it does not save the tokens, so no role checks required in this action (all the checks are performed in SaveHealthCheckSettingsAction)
- GetHealthCheckAnalysisActions: added role checks
On the Health Check Overview dialog, a pool is displayed as read-only if connected as a user with roles that don't permit changing the health check settings:
- the following actions are not available: enroll, edit settings, disable health check, request upload, get analysis result
Adds tab indexing to the control for allocation and changes label names.
Corrects mistake that led to exception being thrown when the Disk Size is decreased in the the New Disk Dialog.
- no “the” is needed in front of “Citrix Insight Services” (e.g. “…authenticate with Citrix Insight Services…” and not “…authenticate with the Citrix Insight Services…”)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Memory Tab uses GB units for values greater or equal to 1 GB, otherwise show in MB;
- Search Tab displays values in GB or MB in the same as the Memory Tab (e.g. 512 MB of 1 GB, 256 MB of 512 MB, 2.5 GB of 16 GB).
- The shiny bar present in the Memory Tab and in Memory Settings dialog shows the scaling in the following way: If smaller than 1 GB, then show as before, else show only labels with values multiples of half a GB.
- The units used in Memory Setting Dialog are set depending on the static_max. If it is greater or equal to 1 GB, then the units are GB, else MB. The user does not have the possibility of changing them.
- Thick provisioning - > Fully provisioned
- Subsequent allocations -> Incremental allocations
Also, updated the Next button on the Location page of HBA SR, to say "Next" for Dundee or greater and "Create" for pre-Dundee pools.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
CA-157785: Hotfix wizard forgets which servers should be greyed out.
When clicking Download and Install update in the Updates Tab, instead of opening a new dialog, it opens the Updates Wizard on the Select Servers Page and download the file in the Upload Page.
Fixes issue regarding the upload of the update every time that the user gets to Upload Page. Now it only uploads it if it has not been uploaded before.
Fixes issue regarding the download of the update every time the user goes back to the Select Patch Page. If the user goes back, but does not change the choice of the update, the download will not be done again.
CP-13035 : Add Refresh button to list of updates on the Updates wizard.
CP-13037 : Provide option from the Updates wizard to navigate to the web page of any hotfix.
- show new NIC column on the Location page (visible for FCoE only)
- display the summary page
- resource strings for default SR name and the blurb on the first page in the wizard
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Add New Virtual Page (VDI):
By default, the SR's default initial size allocation percentage (that may be different for different SRs) is used.
Once the user has changed the initial allocation rate, the page would only use the custom value from that point.
New SR Wizard:
Minimal change in if statement and added comment in RunNextPagePrecheck
method for LvmoHba.
- add the option on the destination page of the wizard
- for authentication purposes, MyCitrix credentials are required.
- these credentials are only used to obtain an upload token that will be used for the upload.
- the upload token expires in 24 hours and is not saved in the xapi database.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Changed code, because API needs 0-100 percent values as 0..1
-Code for HBA SRs
-Changed free space check for new VDIs to condider initial disk size only
when the SR is thin provisioned
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
testSafe2Upgrade pugin function in prepare_host_upgrade.py is called as part of the RPU pre-checks
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- changes to the text to be suitable for migrate and copy operations, where possible
- added different text for copy on some pages
- also different text for single and multiple selection
- changes to text alignment, tab order, hotkeys on the copy pages
- removed Finish page from the intra-pool copy wizard
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- while upgrading a host, throw a HOST_OFFLINE ("Server could not be contacted") exception if the host can no longer be resolved (instead of HANDLE_INVALID)
- also corrected the parameters of the HANDLE_INVALID exception, as an extra parameter is needed for the friendly error name.
- in the UpdateManualHostPlanAction class I replaced Host with the private property _host in several places, so we are no longer trying to resolve the host each time we want to write something into logs
- added some null checks, to avoid reporting null reference exception
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added some null checks
- in the Cross pool migrate wizard, add Transfer network page for all cases except intra-pool move (which is performed via VMMoveAction)
- added comments to VMCrossPoolMigrateAction constructor to make it cleared what the copy parameter means
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-New Network Wizard: Changing the layout on the network type selection page to make this page "dpi aware" using FlowLayoutPanel. Additional info is shown on the bottom of the panel instead of tooltips, some code has been removed that used fix positions and moved controls around.
We observed that some threads can reach deadlock-ish state after they have Invoked into a control's UI thread. When it happens they are all in a waiting for join or in sleep state for very long time, although there should not be any deadlock situations.
It seems this has something to do with multiple parent controls and with which control we invoked on. This should not make a difference, because we have got one UI thread (for MainWindow) they should wait for, but we have seen it does.
The solution that fixed this issue was to invoke on the MainWindow instead of various controls (see a4fe507adf ).
This changeset is changing all our Invokes to invoke into MainWindow
instead of a control itself. (MainWindow's UI thread is the only UI thread
all Control is using in XenCenter)
This changeset should be in place until we have found the root cause or the exact reason for the above.
- modified CopyTemplateCommand to launch a cross pool copy if permitted
- added CrossPoolCopyTemplateCommand which opens the Cross pool migration wizard in "copy" mode
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added a "copy mode" page to the Cross pool migrate wizard (when in copy mode) where the user can select intra-pool or cross-pool copy
- If intra-pool option is selected, then the wizard will display a page similar to what we currently have in the Copy VM dialog
- If cross-pool option is selected, then the wizard will display all the cross pool migration pages
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- modified the VMCopyCommand to launch a cross pool copy if permitted
- added the CrossPoolCopyVMCommand which opens the Cross pool migration wizard in "copy" mode
- modified the cross pool migrate action with an extra "copy" parameter, which will add a copy option to the vm.migrate_send function call
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changes following code review:
- add static methods to the cross pool migrate and move commands to determine if the command can execute
- In the Cross Pool migrate wizard: add Transfer network page for cross-pool move (and copy) operation (as well as all migrate cases)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Making CIFS radio button invisible (instead of visible but disabled) when CIFS is restricted (license)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
-New SR Wizard - SR Type Selection page: radio buttons are now on a TableLayoutPanel with auto sized rows
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- With these changes, a stopped or suspended VM can be moved across pools; this is performed as a vm migrate operation.
- The intra pool move will continue to be a vdi.copy + destroy operation for stopped VMs, but for suspended VMs we need to do it a as vm migrate operation.
- We use the Cross Pool migrate wizard for both intra and cross pool move operations, but introduced a wizard mode parameter in order to adapt the wizard to the specific operation we want to perform (migrate, move or copy)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-NFS version selector radio buttons now belong to the Create new SR option. This section is disabled on reattaching.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
New SR Wizard:
* Removed "V" Alt-key from "NFS Version" text
* Changed the alignment of the NFS version selector radio buttons to vertical
* Fixed tab orders at all places
"* New SR wizard -> Type page: Add more info for CIFS (similar to what we display for NFS)
* New SR wizard -> Type page: Rename the other types to:
** Virtual disk storage: NFS, iSCSI, Hardware HBA, CIFS
** ISO library: Windows File Sharing (CIFS), NFS ISO
* Autogenerated description should say "CIFS SR" (not NFS SR)
* SR type (as displayed on the General tab for a CIFS SR) should by CIFS (not Unknown)
* New SR wizard -> Location page for CIFS: correct tab order"
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
-updating Errors property in SrWizardType_Cifs with the Failures that can occur when doing CIFS SR operations
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
-Added support for CIFS (SR type, SR Wizard)
-Added some Debug.Asserts to the Create SR action to watch for clear text paswords
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- When the install fails, log the full error description
- Added a specific exception for the supp pack installation failure
- Better action title (depending on the number of servers it applies to)
- Added a "More Info" button on the "Update" page, which displays a message with more information on the supp pack installation failure
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- If failed to retrieve the config parameters, then make the ConfigDriveTemplate textbox read-only and display the reason why it is not editable (similar with what we do for running VMs).
- In the New VM Wizard, if the action on "Reset to Default" button fails, then popup a message box with an error saying that we were unable to retrieve the default parameters. In this case, the ConfigDriveTemplate textbox remains unchanged.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- this applies to the Cloud-config page on the New VM Wizard and VM properties dialog.
- same for the container enlightenment page on the VM properties dialog.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- The cloud config parameters page is only visible on a VM that already has a config drive.
- The cloud config parameters can only be changed when the VM is halted.
- In the New VM wizard, if a template is selected that already has a config drive, them the wizard will display the existing configuration, not the default one.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Added HostOutOfSpaceProblem to let the user to clean up disk space when getting PATCH_PRECHECK_FAILED_OUT_OF_SPACE error at precheck stage in the patch install wizard.
-A bit of refactoring of DiskSpaceRequirements class in order to be reused here
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- don't update the progress bar when checking disk space (only the description)
- the color used for "in progress" action description (above the progress bar) should be the system default font color, not black
- actions should throw ArgumentNullException, not NullReferenceException
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Before starting the upload to the master hosts, check if there is enough disk space (check only performed for Cream or greater hosts)
- If enough space available the upload starts automatically; otherwise an error is displayed
- If we can free up enough disk space then we offer the option to Clean up. Otherwise we provide the user with the information on required and available space and the user will have to manually free up required space.
- Also Disable the Upload page for oem updates
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
UploadSupplementalPackAction:
- use http-put with the default timeout
- throw current exception in RemoveVDI (instead of encapsulating it in a new one)
- add other_config key before uploading to make sure the vdi has this flag set from the beginning of its lifetime
- upload progress bar now shows the total progress per row
Also included a cosmetic rewrite of PatchingWizard_PatchingPage,GetUpdateName function
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- update the Patch property even when the selected update type is not "Existing patch". This will be set it to null if the selected type is supplemental pack.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Select a supp pack in the hotfix wizard
- Recognise that it's a supp pack not a hotfix
- Check if there's enough space on a SR to contain it: (1) default SR if shared or (2) any shared SR or (3) local SR on each host in pool
- Create a VDI to contain it
- Upload the supp pack to the VDI
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added check for Clearwater SP1 or greater to the gpu capability on the New VM wizard
- On the GPU tab, draw the grid on the shiny bar only if the capacity is greater than one
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changes following code review:
- Added VM.CanHaveVGpu function (at the moment just returns CanHaveGpu, but it will change in the future)
- Added vGPU_type.IsPassthrough function and used it everywhere we needed to test for passthrough (max-heads==0)
- Simplified code in Helpers.GpuCapability, Helpers.VGpuCapability, NewVMWizard (gpuCapability), MainWindow and GpuRow
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
New properties:
- Pool.HasGpu = Pool has at least one PGPU
- Pool.HasVGpu = Pool has at least one PGPU that HasVGpu
- PGPU.HasVGpu = PGPU has at least one supported_VGPU_type that is not pass-through
New or modified helper functions:
- Helpers.GpuCapability = GPU feature not restricted (by licensing) and Pool.HasGpu
- Helpers.VGpuCapability = vGPU feature not restricted (by licensing) and Pool.HasVGpu
- Helpers.ClearwaterSp1OrGreater = API version is 2.1 or greater
The GPU dialogs are displayed as follows:
- GPU page on VM properties dialog: Visible only if VM.CanHaveGpu and the GPU feature not restricted (by licensing)
- GPU page on New VM Wizard: Visible only if VM.CanHaveGpu and the pool has GPU capability (Helpers.GpuCapability)
- GPU page on Pool properties dialog: Visible only if the pool has vGPU capability (Helpers.VGpuCapability)
- GPU tab: Visible only if the pool has GPU capability (Helpers.GpuCapability) and is Clearwater SP1 or greater
- On the GPU tab, the "Placement policy" panel: Visible only if the pool has vGPU capability (Helpers.VGpuCapability)
- On the GPU tab, the "Edit" button on the "vGPU types" panel: Visible only if the PGPU.HasVGpu and vGPU feature not restricted (by licensing)
Also:
- VM.CanHaveVGpu function renamed to CanHaveGpu
- On the GPU tab, renamed "Allowed vGPU types" to "vGPU types
Show pool (or standalone server) name on the Upload page.
Also corrected some resource strings.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added new page to the patching wizard, called "Upload" which displays the upload actions for each server and the progress of these actions
- MultipleAction: added the functionality to optionally stop the action on first failure
- Fixed the error where an existing patch downloaded from another server and then uploaded to a new one was not deleted on cancelling the wizard [CA-156788]
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
In some cases calling Control.Invoke() from a background thread causes that thread to go in a "sleep, wait, or join" mode, while waiting for Invoke to happen, although the UI thread is running normally.
If the Control is the MainWindow, it works as expected, but we've seen it happening while connecting or disconnecting from a large pool, on calling Invoke on controls like NavigationView, AlertSummaryPage, HistoryPage, etc.
To fix this, we call the Invoke on the MainWindow in all the places where we've seen the issue.
With this changes, the previous fix for CA-148245 (call RequestRefreshTreeView on CacheClearing event) is not needed anymore, so I removed that call.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Showing link to CTX page if StorageLink problem was found at pre-check (in RPU Wizard)
-Enable the Resolve All button on the pre-check page only when there is at least one problem found and all the problems have solution/fix - minor refactoring
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Show the page and grey out the irrelevant options (i.e. the installation media if the template has no CD drive).
- Only disable the Installation media step if the template has no installation media and we don't show the boot options (because is HVM).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Updates view: on pressing Download and Install, open the wizard at "Servers" page, select all the servers that the patch applies to, and disable all the others.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- The problem was the Summary page was displayed before the lists of succeeded and failed actions have been populated (on the Completed event of each action).
- To fix it, we populate these lists after all the actions are completed, and on the event thread.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Suppress reporting of success and failure for sub-actions:
The suppress history flag is set when the action is created and if is false (by default) the action is added to the history (the Events list).
In order to suppress history for the subactions, we need change all actions used in Edit pages so their constructor can set the SuppressHistory flag and then use these constructors with suppressHistory = true on all the implementations of IEditPage.SaveSettings() where an action is created
(then we need to remember to do the same everytime we introduce a new page and / or "save" action).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Renamed “Checking can evacuate host status” precheck group to “Checking VM migration status”
- Prechecks page – check that all VMs have valid vCPU settings (i.e. number of vCPUs is a multiple of number of cores per socket).
- This check is included in the ‘Checking VM migration status” group
- If a VM has invalid vCPU settings, the precheck will display the problem with a solution to “Fix vCPU configuration” which opens the VM Properties dialog on the CPU page.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Text on CPU page - changed to include topology.
- Summary page on the New VM Wizard – changed to include topology
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Made the radio button invisible for Creedence or higher XS hosts.
Removed previous StorageLink-related upgrade pre-checks and added (strict) check to prevent upgrade when StorageLink is used.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- The VLAN can be set to 0 only for Creedence or greater hosts on the vSwitch backend.
- When VLAN 0 is selected, an info is shown next to the control, saying "VLAN 0 will receive all traffic not on any other VLAN"
- Also fixed an error on New Network Wizard, where the "VLAN in use" message was still visible when changing the NIC.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
If errors are found the error info at the bottom of the page shows up, however this should not happen while still checking and before any errors have been found.
Same applies for Prechecks page of Install Update Wizard.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
common code to the base class BackgroundThreadBase; removed classes inheriting from
EventArgs; use Action/Action<T> delegates instead of EventHandler<T>.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also GPU page on Pool properties dialogs should not be shown for non vGPU pools.
# HG changeset patch
# User Mihaela Stoica <Mihaela.Stoica@citrix.com>
# Date 1385743406 0
# Fri Nov 29 16:43:26 2013 +0000
# Node ID e28f9921a0a17efb1e3a8d185acf18b5b6e116b1
# Parent 59229250db34dd4cc1f34fbdab055467a1570f87
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
no forms are open. Since there is no event notifying about the Application.OpenForms
changing, created a new base class for all XenCenter dialogs and wizards with a
static event to which the main windw can subscribe.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- before leaving each page of the wizard, check if all selected VMs are still available for migration
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
and preselected combobox item when the user first lands on the GpuEditPage.
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1382365049 -3600
# Mon Oct 21 15:17:29 2013 +0100
# Node ID addf480a5eeb1c2bfc1a2756fee55dfa966d1751
# Parent dc93a040fbe1e9ca80e39352dc776941fd4c7802
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
sortable; substituted balloon warning with tooltip; moved privace statement link
to the bottom of the page; reordered select/clear all buttons.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
can start typing immediately. Thus the watermark with the example text is lost,
but I restored in on the label under the textbox instead.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
padding and docking values to make things look right, increases the possibility
of future layout bugs, especially in non-EN laguages).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1376062101 -3600
# Node ID e9a03389b4dfd447a4034b55d74827d30e3950be
# Parent d0a3fa6db59fcaea186f0909053866153d15d450
CA-112877: Set the description text of the transfer VM network page when the export/import
mode is set ratehr than when the page is populated to avoid refreshing issues. Also,
fixed string formatting issue which could potentially cause problems with the word
order in languages other than English.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
the same code. Use a CommandToolStripItem to launch the BugToolWizard like we do
for other wizards. Added overload for the MainWindowCommandInterface.ShowForm
method which allows to pass arguments to a wizard constructor.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
NewAction to use the Action<ActionBase> delegate instead of EventHandler. Thus
there is no need to fire them with Empty or null EventArgs and on several occasions
we avoid casting objects in the event handlers.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
1. Added additional check to DownloadAndInstall method in ManageUpdatesDialog.cs: will proceed to the prechecks page in the Install Update Wizard only when there are selected servers on the previous page.
2. Modified code to allow hotfix installation when the host is in maintenance mode; however the host cannot be upgraded when in maintenance mode.
3. Modified test to reflect changes described above.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
Moved LMVoHBA related code from UpdateWizardContent() method to CanShowLVMoHBASummaryPage() method which is called from RunNextPagePrecheck() method now: the code prepares all lvmohbaSrDescriptors for each LUN selected by the user and executes RunFinalAction() method.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
New info dialog displayed when the user cancels the last page (Apply Upgrade page) of the Rolling Pool Upgrade wizard.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
1. Changed definition of IsDetached property in SR.cs: SR is detached when it has no PBDs or when all its PBDs are unplugged.
2. Added bool HasPBDs property in SR.cs (replaced previous IsDetached property definition).
3. Reviewed all usages of sr.IsDetached property.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
Added Summary page to the New SR Wizard for HBA SRs. This page will display how many SRs were created successfully and how many failed to create.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
Make Resolve All button visible (the button and the "resolve all" logic existed already; the button's visibility was set to False).
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
been previously upgraded.
Introduced Host.LongProductVersion property which returns host's
product version and build number (e.g. 5.6.100.72258), or null if
product version can't be found. We use this property to check
if the master has been updraded and to decide which slaves need
to be upgraded or to skip hosts already upgraded.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Clear All button disabled when no rows selected; Select All button
disabled when all rows selected.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
1. Resized columns on the LOcate Mirrored SRs page in the DR Wizard.
2. Changed wording of DR_WIZARD_STORAGEPAGE_DESCRIPTION_FAILBACK and
DR_WIZARD_STORAGEPAGE_DESCRIPTION_FAILOVER messages.
