On the General tab XenCenter shows a list of updates that requires the host to be restarted. This is shown for applied updates for which the required guidance hasn't been done (eg. restartHost or restartAgent after-apply-guidances)
This commit fixes a regression that caused restartToolstack warnings to be not shown in the list of warnings.
The displayed messages are also improved, XenCenter will show Toolstack restart or host restart appropriately and not just restart only as it used to.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Renamed Add/Remove PVS Site buttons
- Added a note on the PVS Cache configuration page, regarding the recommended cache size and the allowed size for "memory only"
- Added a warning about the Site configuration not being complete until the PVS part is done as well (only visible if PVS_uuid is not set for a PVS_site)
- Added PVS Read Caching status on the VM's general tab
- The absolute maximum allowed for a cache size is 2TB
- Changed the rubric on the Enable PVS read caching dialog
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- instead of repopulating the whole grid when a proxy or a site changes, we now refresh just the row that needs refreshing, and when the refresh is indeed needed.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
removing event registration unless it's written out fully like the rest of the
autogenerated code.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Removed the cache configuration gridview from the PVS tab. This tab now contains the button to configure PVS cache and the VMs grid
- Show the confirmation dialog even when deleting a new site
- Enabled the "View PVS servers" button only if the site has servers
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
PVS Tab:
- Move the "View PVS sites" button inside the "Configure PVS Cache" dialog (next to Remove button) and make it per-site (showing only the PVS servers from that site)
- Remove "Currently attached" column from the VMs section
- Rename "Status" column to "Read caching status"
Configure PVS Cache" dialog:
- Make sure there is a scrollbar to accommodate all hosts in a pool
- Add a confirmation dialog when a site is removed. The action is executed when the Remove button is pressed.
- When Memory SR is selected, set the maximum value to the dom0-extra-memory..
- Allow empty configuration (but see next point): The OK button should only be disabled if the PVS site name is empty
- Add an extra option in the "Cache storage" combobox, with text "Not configured", selected by default on a new site. When this is selected, we will remove the existing entry in pvs_cache_storage and will not create a new one.
- When a PVS site is deleted (forgotten), we first delete all the associated PVS_servers, otherwise the site cannot be deleted.
- Was only able to move and not migrate vdi if selected from the objects view.
- The text on the ToolStripMenuItems on the SrStoragePage was different from the
corresponding buttons.
- Added item move/migrate to the multiple VDI context menu. The Properties item
should not be shown in this case.
* CP-16922: UI changes to PvsPage to replace the single configure button with a separate enable and disable one, per the design doc
* CP-16922: Intermediate checkin - command + dialog implemented, but PVS page has some layout problems.
* CP-16922: Implement GUI for enabling PVS read caching and marking/unmarking VMs for prepopulation
Fix the broken layout by reverting MainWindow.resx (which shouldn't have changed) back to the previous commit. Also removed duplicate properties button code.
* CP-16922: PVS Page changes, to properly display all VMs (not just ones with proxy), only populating proxy columns if there is a proxy set.
* CP-16922: Use a CommandButton for the enable button, connected to the same command as the VM main menu button, and using the table selection as its selection manager.
* CP-16922: Delete the old enable button click behaviour (because it now has a proper command), was causing the dialog to show up twice
* CP-16922: Properly list VMs by hiding those that should be hidden (in addition to non-VMs, also hide the __gui__ prefix and others covered by Show function). Also fixes a bug in NewVMGroupVMsPage discovered when fixing this - it would show VMs that should be hidden if you used the search bar.
* CP-16922: Use ButtonText on the Command to set the text on the PVS enable button
* CP-16922: Add the disable PVS read-caching command, and its associated proxy destroy action. Both based off enable equivalents (main difference is no dialog for now). Not used yet but will be in main window menu + disable button
* CP-16922: Add disable PVS read-caching to the main window menu (under enable), with the disable command attached to it
* CP-16922: Add support for disabling PVS read-caching for selected hosts via the PVS tab page by converting the disable button into a CommandButton in the same way as the enable button, using its own command + selection manager (because Selection Managers only bind to one control)
* CP-16922: Design - adding the "read caching enabled" column from the design, so that we display both whether caching is enabled and whether the VM is currently cached. If it's disabled all other values are missing.
* CP-16922: Add the PVS site column per the design to show the site a VM's PVS Proxy is on if it has a proxy
* CP-16922: Add an event handler for VMs changing so that newly provisioned VMs immediately show up in the PVS tab page
* CP-16922: Support for properly remembering the selection when the VM list is refreshed. A new method returns the list of VMs for the selected rows, and we can then check if the VM for the row being added is in this list. If there was no previous selection then we still select the first row by default.
* CP-16922: Remove prepopulate, which is being removed from the design. The next XAPI version will remove it, so just pass False as prepopulate for now, and remove the option from the dialog and PVS tab page.
* CP-16922: Improve UI appearance for a missing Storage Repository. Per the design, if there is no SR show the message None (memory only) instead of an empty cell
* CP-16922: Improved sorting behaviour. All columns (except VM name, which always uses it) use the VM tag as a sorting fallback (since they all have duplicates). New default sort which sorts by caching enabled first (yes before no), and then VM tag as a tiebreaker. Support for remembering the current sort on refresh, ie when a value changes.
* CP-16922: Refactoring to use a VM extension method to get the PVSProxy (or null if none exists) for a VM. This was used in the PVS Page + commands which are now much simpler.
* CP-16922: Move where the SelectionChanged event handler is set when refreshing the PVS table, so that the command buttons are updated correctly.
* CP-16922: Improvements to PVS read-caching dialog. Set accept/cancel buttons properly + adjust tab values, so focus acts as expected
* CP-16922: Remove the images from the menu for Enable/Disable PVS read-caching, most commands in the menu don't have one
* CP-16922: Sorting out the strings for the actions + ParallelAction calls, and moving them into the resx. Also reverting wrong MainWindow.resx changes.
* CAR-2184: XAPI changes. I've made the minimal possible changes to PvsPage to ensure it compiles, but it's had a lot of feature work (CP-16922) that supersedes this, these small changes should keep that merge painless.
* CAR-2184 XAPI: Reverse the unrelated changes, only keep the PVS ones.
* CP-16922: Merge latest XAPI changes, notably changes to Pvs_site.create
* CP-16922: Change tab show/hide logic for PVS tab, show it even if there are no PVS sites.
* CP-16922: Implement GUI for enabling PVS read caching
Design changes - remove the storage repo column and replace it with status, which is populated with a friendly version of the pvs_proxy_status enum. Also populate site list using site.name_label
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* CP-16922: Implement GUI for enabling PVS read caching
Adjusting the CanExecute of Enable PVS read-caching command to require at least one PVS site to be created. Since the PVS tab can show up without any sites, we need this because we can't create a proxy without a site.
* CP-16922: Code review changes.
Tidied up messages, and ensured actions run async properly, and without exiting before their task.
* CP-16922: Code review changes.
Update dialog resx, wider combobox on dialog, update action descriptions before setting RelatedTask, add friendly message body for PVS error notifications.
* CAR-2184: XAPI changes. I've made the minimal possible changes to PvsPage to ensure it compiles, but it's had a lot of feature work (CP-16922) that supersedes this, these small changes should keep that merge painless.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* CAR-2184 XAPI: Reverse the unrelated changes, only keep the PVS ones.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
- show/hide the context menu items instead of creating and adding new ones each time the context menu opens
- right click menu with rescan/add was not available for empty list or when empty space was clicked
- the condition for the edit button was slightly different from the edit toolstripmenuitem
- improved button layout (part of CA-100083)
- tidied up button event handlers and renamed one or two class members
- removed unused parameter in constructor and method of VDIRow
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- fixed issue where the context menu with add/attach items was not available
for empty list or when empty space was clicked; in the latter case I also clear
the selections
- added ability to launch the context menu by using the windows properties button
- moved context menu to the designer; changed code to show/hide the relevant menu
items instead of adding new ones each time the context menu opens
- added icon to the context menu item Properties
- fixed button layout (part of CA-100083), then removed separators between buttons
because when they wrap it looks a bit strange
- fixed some weird cross-threading exception (could not reproduce reliably)
- renamed one or two class members and tidied up the button event handlers
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Making the requested changes: Name is now sorted by the generic CompareTo method (which uses name with opaque ref as tiebreaker), and Description also uses opaque ref as tiebreaker for consistency.
Change the sorting on the Name and Description columns to use StringUtility.NaturalCompare, which correctly sorts strings with numbers at the end (eg name, name0, name1, name2, name10 will now sort correctly while alphabetic sorting is incorrect). Also added a tie break on uuid to make sorting behave predictably with duplicates in these columns.
Now using the EscapeAmpersands string extension method. Also resolved the custom fields display issue in the same way.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
The ticket said the character after the & became a hotkey (like labels etc do with UseMnemonic enabled) but I couldn't reproduce that - & symbols were simply removed from the string. The fix is to replace them with &&, so the string.format prints a single & as it should.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
Generalising to also support pools. New CheckHostPatchesRequiringReboot method with the same behaviour as old method (return list of KeyValue warning messages). Pool updates on Ely use the union of messages from this method instead of the old one. Also localised the "{hotfix} on {server}" string per todo (hence resx changes).
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
For servers running Ely or greater we now produce messages for patching requiring reboot using the host.patches_requiring_reboot field. The Pool_patch objects resolved are sufficient to produce the same messages. Note that some patches produce a message in the old API but not the new, this is intentional. Still to do: update pool updates in the same way,
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
