Also, corrected the RBAC permission check after stopping using the conversion plugin.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* Corrections and enhancements.
Fixed version compatibility check. Added context menu to the conversion list.
* Exclude templates and snapshots when looking for the conversion VM.
* Further corrections.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CP-30958: Initial implementation of the Conversion Manager in XenCenter.
* Corrections following review and improvements.
* Further corrections and improvements.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Removed comments that did not provide further info than the class name
they were documenting. Removed unused code. Launch progress dialog within
a using block.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
1. Update AddVGPUDialog title;
2. Add label above the combobox;
3. In the combobox, add text to the entry saying if multiple vGPU is supported;
4. When the dialog is open, focus on the combobox;
5. Preselect the vGPU type if there is only one option available;
6. Setup the Help ID for dialog;
7. Optimize vGPU adding and deleting in GpuAssignAction.
Signed-off-by: Michael Z <michael.zhao@citrix.com>
* CP-31063: Add support for multiple vGPU
(incomplete)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CP-31063: Add support for multiple vGPU
(part 2)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* AddVGPUDialog
Signed-off-by: Michael Z <michael.zhao@citrix.com>
* Update bindings.
Signed-off-by: Michael Z <michael.zhao@citrix.com>
* REQ-720: Initial implementation of AddVgpuDialog.
Signed-off-by: Michael Z <michael.zhao@citrix.com>
* Improve the handling of buttons and combobox. Fix comments.
Signed-off-by: Michael Z <michael.zhao@citrix.com>
* Fix comments.
Signed-off-by: Michael Z <michael.zhao@citrix.com>
- On the dialog show the next run time in both the client's and the server's local time zone.
- On the VMSS frequency page allow the user to pick the schedule in the client's
local time zone and show then next run time in both the client's and the server's local time zone.
- Refactoring to fix workflow and class design, reduce amount of code and simplify logic.
- Various layout improvements.
Signed-off-by: Aaron Robson aaron.robson@citrix.com
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Refactored MeddlingAction and Task classes: moved the logic for building a MeddlingAction outside the Task class and switched to using the vm_operations enum to identify which tasks are suitable for MeddlingAction
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
because it only manages friendly names; moved it closer to the relevant resource files.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* Simplification: use auto-properties.
* Removed unnecessary null check. Converted private methods to linq method chain.
* Removed unused file. Added null check.
* Corrected property names as it was difficult to distinguish between the alert,
the patch and the filepath.
* Removed duplicate lock.
* CA-296490: Rewrote the logic uploading single updates so as to facilitate uploading to multiple pools in parallel.
* Corrections as per code review.
* Account for the case of uploading from disk legacy updates that do not correspond to an update alert.
Removed unfriendly error messages (the failure is written out in the logs anyway).
* Wizard test corrections and some modernising:
- Only call cancel on the last page if the test allows us to.
- Do finish the UpdatesWizard test.
- Finish the RunWizardKeyboardTests using key strokes instead of button clicks.
- Ensure the Cancel/Previous buttons do not have focus when sending an Enter stroke.
- Use optional parameters in the WizardTest constructor and string interpolation.
* Renamed badly named property.
* Improved code cloning VMs by assigning new opaque_refs to cloned VBDs.
Compacted test object provider: use optional parameters instead of method overloads.
* Modifications to prevent multiple update of enabled state and ensure the wizard
buttons are updated last.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Use two separate feature flags, `guefi` and `guefi-secureboot`, with the following rules:
- If the feature is disabled, then the option is hidden in XenCenter.
- If the feature is enabled and experimental, then the option is visible and a warning is displayed in XenCenter (in the New Vm and Import wizards).
Also show the reason why a boot mode option is greyed out (when the uefi/uefi-secure boot mode is not supported in the selected template).
(On the Page_InstallationMedia control, I moved the BootModeContol and PvBootBox controls inside the TableLayoutPanel, to allow better alignment and for better visibility in the design mode)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CP-29856: Support minimum number of vCPUs in guest templates
- Show a warning if the user wants to set a smaller number of vCPUs than the minimum specified in the template
- Add a null check; Set the warning label text before making it visible to avoid flickering.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Refactored redundant IP Address parsing code from XenAPI-Extensions/VIF.IPAddresses and XenSeach/Common.IPAddressProperty into the FindIpAddresses method in the Helpers class to handle multiple networks on a single line with a separator. Added unit tests.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com>
CA-303516: Cannot change dom0 memory via XenCenter.
Allowing the user to proceed (not set the value and min/max to 0.0GB) even if the memory static min and max is in the wrong order.
Adding further detail to the error message in case an out of bounds value is sent to the API which could potentially happen due to the range widening that occurs if the min/max would invalidate the existing value.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com>
When XenCenter checks if a VM can be storage-migrated (including in the same pool), it only checks if migration is possible to one SR (the first SR from the SR list that supports vdi creation), which could be a GFS2 SR, where migration is not supported. With this fix, we will only consider the SRs which support migration (instead of vdi creation).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- When the host/pool was disconnected or when changing selection from connected to disconnected pool
the header was not updated with the new licence status.
- If the pool hosts' edition is none of the known editions, show unknown, not free.
- Tidy up: moved the Pool.LicenseString method to Helpers.GetFriendlyLicenseName.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
1. Update the duplicated shortcuts on CPU&Mem Page
2. Default radio boxes invisible
3. Move hardcoded logic to VM.cs
4. BIOS boot should be always enabled
5. Move radio boxes to Installation Media page
6. Extract radio boxes as a user control
7. Update summary
Signed-off-by: Tim Liu <tim.liu@citrix.com>
* Remove restriction on creating >2TB disk
* Changed restrictions for resizing VDI
* Removed old method and replaced it with direct calls to new method
Signed-off-by: serenc <seren.corbett@citrix.com>
Also add a sleep to try and avoid getting a VDI_IN_USE exception when deleting the VDI after the upload failed or has been cancelled by the user
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
a message in this case as the SRs are reconnected after reboot and this may lead
to duplicate messages. Also, simplified check-and-plug methods for PBDs to avoid
repetition of iterations.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-287856: Add new API calls and update SR repair
* CA-287856: changed setIscsiIQN and added try/catch
* CA-287856: correct method
* CA-287856: add else
the action was failing to create a metadata session; the latter was due to accessing
directly properties of the xmlrpc proxy which is null since we use the jsonrpc backend.
Also fixed some more areas where the same might occur.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CP-26363: Display the remaining VF numbers in NIC TabPage
* correct the link status of Networking TabPage
* show the warning when creating SR-IOV network
* fix some comments
* modify the action
Signed-off-by: Jisheng Xing <jisheng.xing@citrix.com>
* CP-26884: add network-sriov info in OVF file when exporting vm
Signed-off-by: Jisheng Xing <jisheng.xing@citrix.com>
* CP-27199: Block VF assignment to VM according to recommendations
Signed-off-by: Jisheng Xing <jisheng.xing@citrix.com>
* fix some comments
* revert the Messages.resx
* update the XenAPI according to the Jason-RPC
* CP-26362: Enable create SR-IOV network
* fix review comments
* fix the judgement on SR-IOV details page
* disable the finish button
Signed-off-by: Jisheng Xing <jisheng.xing@citrix.com>
For this purpose, the evacuate-reboot-bringbabiesback triplet was replaced by a
new RestartHostPlanAction, which allows fallback to toolstack restart if live
patching has succeeded. Also, created new abstract class HostPlanAction to
reduce code duplication.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
in the Host extensions. Moved method TryResolveWithTimeout to the Connection class
where it is more relevant. Removed wrapper methods WaitForReboot and WaitForAgent
as they were not particularly useful.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-283656: Linked SM and SR
* CA-283656: Checks new SR_MULTIPATHABLE capability
* CA-283656: Changed properties into methods
* CA-283656: Change key
Signed-off-by: serenc <seren.corbett@citrix.com>
it's obvious what it is. The Session's uuid will be deprecated from the API bindings.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Restored API version 2.10 in test database. Private member Session._uuid
has been removed from the SDK.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CP-25564: Changed clusteringEnabled variable
* CP-26026: Added a link to enable clustering on SR Wizard
* CP-26026: Tweaked according to PR feedback
* CP-25967: Added license restriction for GFS2
Signed-off-by: serenc <seren.corbett@citrix.com>
