The restriction that Storage Motion was not possible in the presence of WLB has been removed in Dundee. This commit removes the check in XenCenter.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changes following code review:
* Disabled MTU control and added info label when MTU cannot be changed (due to Min==Max)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
I assumed the problem was that vm.resident_on is always unknown for stopped vms, but this is there intentionally to match only running vms and be always false for stopped ones. However, we still need similar logic to not to send VIF mapping when not needed in the assert.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Fixed filters that are used to determine whether a vm can be migrated to a destination or not.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Fixed how we set the Maximum for the dropdown controls on:
* Creating External network,
* Creating Bonds
pages on the New Network Wizard
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Now CrossPoolMigrateCanMigrateFilter can accept a parameter to decide whether to allow same target pool or not -- if allowSameTargetPool is false, it won't.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- rearranged the controls (removed group box, indented upload-related controls)
- also changed the progress bar style for the upload action to Marquee, as the Blocks style did not show any progress and it looked like the upload hasn't started
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Add Trim() to the instances where we check if the username is null or empty and also where we use it for authentication
- This applies to both XenServer username and Citrix username
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added Case Number edit box on the Destination page of the wizard
- valid case number needs to be 9 or less digits
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
In the RPU wizard, after we notice that the host has been rebooted we try to resolve the host from cache, but sometimes the cache is not populated at that point.
Then, because we cannot resolve the host, we cannot check the host version and we assume is a newer version (which might not be true).
This commit adds a call to retry to resolve the host (with timeout).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Fixed issues where total initial allocation for an SR was not calculated correctly. Also some minor improvements.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- removed unneeded code, as the item.OverCommit is set to None at the beginning of the function
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- renamed srSpace and srInitialSpace variables
- removed unnecessary checks for thin provisioned sr
- fixed some error on NewDiskDialog.SMConfig property (smconfig was wrongly populated based on controls enablement; the conversion to long was made before converting to bytes
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- If the new disks cannot be created because their total initial size is greater than the SR free space, then an error icon (with tooltip) is displayed and Next button is disabled.
- If the total size of the new disks is greater than the SR free space, but the disks can still be created (because the initial allocation is smaller), then a warning icon (with tooltip) is displayed and Next button is enabled.
- The tooltip mentions the initial space required for thinly provisioned SRs (initial allocation).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Not applied updates do not appear anymore in the General Tab of a pool. (Related to CA-180577)
- If we apply a patch that was already applied (happens when we take a file from disk that is not in the updates list taken from the Citrix website -> no metadata), on cancel we are now removing the uploaded patch from the host.
Changed all the health check actions to perform the necessary role checks
- HealthCheckAuthenticationAction: changed so it does not save the tokens, so no role checks required in this action (all the checks are performed in SaveHealthCheckSettingsAction)
- GetHealthCheckAnalysisActions: added role checks
On the Health Check Overview dialog, a pool is displayed as read-only if connected as a user with roles that don't permit changing the health check settings:
- the following actions are not available: enroll, edit settings, disable health check, request upload, get analysis result
Adds tab indexing to the control for allocation and changes label names.
Corrects mistake that led to exception being thrown when the Disk Size is decreased in the the New Disk Dialog.
- no “the” is needed in front of “Citrix Insight Services” (e.g. “…authenticate with Citrix Insight Services…” and not “…authenticate with the Citrix Insight Services…”)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Memory Tab uses GB units for values greater or equal to 1 GB, otherwise show in MB;
- Search Tab displays values in GB or MB in the same as the Memory Tab (e.g. 512 MB of 1 GB, 256 MB of 512 MB, 2.5 GB of 16 GB).
- The shiny bar present in the Memory Tab and in Memory Settings dialog shows the scaling in the following way: If smaller than 1 GB, then show as before, else show only labels with values multiples of half a GB.
- The units used in Memory Setting Dialog are set depending on the static_max. If it is greater or equal to 1 GB, then the units are GB, else MB. The user does not have the possibility of changing them.
- Thick provisioning - > Fully provisioned
- Subsequent allocations -> Incremental allocations
Also, updated the Next button on the Location page of HBA SR, to say "Next" for Dundee or greater and "Create" for pre-Dundee pools.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
CA-157785: Hotfix wizard forgets which servers should be greyed out.
When clicking Download and Install update in the Updates Tab, instead of opening a new dialog, it opens the Updates Wizard on the Select Servers Page and download the file in the Upload Page.
Fixes issue regarding the upload of the update every time that the user gets to Upload Page. Now it only uploads it if it has not been uploaded before.
Fixes issue regarding the download of the update every time the user goes back to the Select Patch Page. If the user goes back, but does not change the choice of the update, the download will not be done again.
CP-13035 : Add Refresh button to list of updates on the Updates wizard.
CP-13037 : Provide option from the Updates wizard to navigate to the web page of any hotfix.
- show new NIC column on the Location page (visible for FCoE only)
- display the summary page
- resource strings for default SR name and the blurb on the first page in the wizard
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Add New Virtual Page (VDI):
By default, the SR's default initial size allocation percentage (that may be different for different SRs) is used.
Once the user has changed the initial allocation rate, the page would only use the custom value from that point.
New SR Wizard:
Minimal change in if statement and added comment in RunNextPagePrecheck
method for LvmoHba.
- add the option on the destination page of the wizard
- for authentication purposes, MyCitrix credentials are required.
- these credentials are only used to obtain an upload token that will be used for the upload.
- the upload token expires in 24 hours and is not saved in the xapi database.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Changed code, because API needs 0-100 percent values as 0..1
-Code for HBA SRs
-Changed free space check for new VDIs to condider initial disk size only
when the SR is thin provisioned
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
testSafe2Upgrade pugin function in prepare_host_upgrade.py is called as part of the RPU pre-checks
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- changes to the text to be suitable for migrate and copy operations, where possible
- added different text for copy on some pages
- also different text for single and multiple selection
- changes to text alignment, tab order, hotkeys on the copy pages
- removed Finish page from the intra-pool copy wizard
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- while upgrading a host, throw a HOST_OFFLINE ("Server could not be contacted") exception if the host can no longer be resolved (instead of HANDLE_INVALID)
- also corrected the parameters of the HANDLE_INVALID exception, as an extra parameter is needed for the friendly error name.
- in the UpdateManualHostPlanAction class I replaced Host with the private property _host in several places, so we are no longer trying to resolve the host each time we want to write something into logs
- added some null checks, to avoid reporting null reference exception
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added some null checks
- in the Cross pool migrate wizard, add Transfer network page for all cases except intra-pool move (which is performed via VMMoveAction)
- added comments to VMCrossPoolMigrateAction constructor to make it cleared what the copy parameter means
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-New Network Wizard: Changing the layout on the network type selection page to make this page "dpi aware" using FlowLayoutPanel. Additional info is shown on the bottom of the panel instead of tooltips, some code has been removed that used fix positions and moved controls around.
We observed that some threads can reach deadlock-ish state after they have Invoked into a control's UI thread. When it happens they are all in a waiting for join or in sleep state for very long time, although there should not be any deadlock situations.
It seems this has something to do with multiple parent controls and with which control we invoked on. This should not make a difference, because we have got one UI thread (for MainWindow) they should wait for, but we have seen it does.
The solution that fixed this issue was to invoke on the MainWindow instead of various controls (see a4fe507adf ).
This changeset is changing all our Invokes to invoke into MainWindow
instead of a control itself. (MainWindow's UI thread is the only UI thread
all Control is using in XenCenter)
This changeset should be in place until we have found the root cause or the exact reason for the above.
- modified CopyTemplateCommand to launch a cross pool copy if permitted
- added CrossPoolCopyTemplateCommand which opens the Cross pool migration wizard in "copy" mode
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added a "copy mode" page to the Cross pool migrate wizard (when in copy mode) where the user can select intra-pool or cross-pool copy
- If intra-pool option is selected, then the wizard will display a page similar to what we currently have in the Copy VM dialog
- If cross-pool option is selected, then the wizard will display all the cross pool migration pages
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- modified the VMCopyCommand to launch a cross pool copy if permitted
- added the CrossPoolCopyVMCommand which opens the Cross pool migration wizard in "copy" mode
- modified the cross pool migrate action with an extra "copy" parameter, which will add a copy option to the vm.migrate_send function call
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
