Add New Virtual Page (VDI):
By default, the SR's default initial size allocation percentage (that may be different for different SRs) is used.
Once the user has changed the initial allocation rate, the page would only use the custom value from that point.
New SR Wizard:
Minimal change in if statement and added comment in RunNextPagePrecheck
method for LvmoHba.
- add the option on the destination page of the wizard
- for authentication purposes, MyCitrix credentials are required.
- these credentials are only used to obtain an upload token that will be used for the upload.
- the upload token expires in 24 hours and is not saved in the xapi database.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Changed code, because API needs 0-100 percent values as 0..1
-Code for HBA SRs
-Changed free space check for new VDIs to condider initial disk size only
when the SR is thin provisioned
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
testSafe2Upgrade pugin function in prepare_host_upgrade.py is called as part of the RPU pre-checks
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- changes to the text to be suitable for migrate and copy operations, where possible
- added different text for copy on some pages
- also different text for single and multiple selection
- changes to text alignment, tab order, hotkeys on the copy pages
- removed Finish page from the intra-pool copy wizard
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- while upgrading a host, throw a HOST_OFFLINE ("Server could not be contacted") exception if the host can no longer be resolved (instead of HANDLE_INVALID)
- also corrected the parameters of the HANDLE_INVALID exception, as an extra parameter is needed for the friendly error name.
- in the UpdateManualHostPlanAction class I replaced Host with the private property _host in several places, so we are no longer trying to resolve the host each time we want to write something into logs
- added some null checks, to avoid reporting null reference exception
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added some null checks
- in the Cross pool migrate wizard, add Transfer network page for all cases except intra-pool move (which is performed via VMMoveAction)
- added comments to VMCrossPoolMigrateAction constructor to make it cleared what the copy parameter means
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-New Network Wizard: Changing the layout on the network type selection page to make this page "dpi aware" using FlowLayoutPanel. Additional info is shown on the bottom of the panel instead of tooltips, some code has been removed that used fix positions and moved controls around.
We observed that some threads can reach deadlock-ish state after they have Invoked into a control's UI thread. When it happens they are all in a waiting for join or in sleep state for very long time, although there should not be any deadlock situations.
It seems this has something to do with multiple parent controls and with which control we invoked on. This should not make a difference, because we have got one UI thread (for MainWindow) they should wait for, but we have seen it does.
The solution that fixed this issue was to invoke on the MainWindow instead of various controls (see a4fe507adf ).
This changeset is changing all our Invokes to invoke into MainWindow
instead of a control itself. (MainWindow's UI thread is the only UI thread
all Control is using in XenCenter)
This changeset should be in place until we have found the root cause or the exact reason for the above.
- modified CopyTemplateCommand to launch a cross pool copy if permitted
- added CrossPoolCopyTemplateCommand which opens the Cross pool migration wizard in "copy" mode
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added a "copy mode" page to the Cross pool migrate wizard (when in copy mode) where the user can select intra-pool or cross-pool copy
- If intra-pool option is selected, then the wizard will display a page similar to what we currently have in the Copy VM dialog
- If cross-pool option is selected, then the wizard will display all the cross pool migration pages
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- modified the VMCopyCommand to launch a cross pool copy if permitted
- added the CrossPoolCopyVMCommand which opens the Cross pool migration wizard in "copy" mode
- modified the cross pool migrate action with an extra "copy" parameter, which will add a copy option to the vm.migrate_send function call
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changes following code review:
- add static methods to the cross pool migrate and move commands to determine if the command can execute
- In the Cross Pool migrate wizard: add Transfer network page for cross-pool move (and copy) operation (as well as all migrate cases)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Making CIFS radio button invisible (instead of visible but disabled) when CIFS is restricted (license)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
-New SR Wizard - SR Type Selection page: radio buttons are now on a TableLayoutPanel with auto sized rows
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- With these changes, a stopped or suspended VM can be moved across pools; this is performed as a vm migrate operation.
- The intra pool move will continue to be a vdi.copy + destroy operation for stopped VMs, but for suspended VMs we need to do it a as vm migrate operation.
- We use the Cross Pool migrate wizard for both intra and cross pool move operations, but introduced a wizard mode parameter in order to adapt the wizard to the specific operation we want to perform (migrate, move or copy)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-NFS version selector radio buttons now belong to the Create new SR option. This section is disabled on reattaching.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
New SR Wizard:
* Removed "V" Alt-key from "NFS Version" text
* Changed the alignment of the NFS version selector radio buttons to vertical
* Fixed tab orders at all places
"* New SR wizard -> Type page: Add more info for CIFS (similar to what we display for NFS)
* New SR wizard -> Type page: Rename the other types to:
** Virtual disk storage: NFS, iSCSI, Hardware HBA, CIFS
** ISO library: Windows File Sharing (CIFS), NFS ISO
* Autogenerated description should say "CIFS SR" (not NFS SR)
* SR type (as displayed on the General tab for a CIFS SR) should by CIFS (not Unknown)
* New SR wizard -> Location page for CIFS: correct tab order"
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
-updating Errors property in SrWizardType_Cifs with the Failures that can occur when doing CIFS SR operations
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
-Added support for CIFS (SR type, SR Wizard)
-Added some Debug.Asserts to the Create SR action to watch for clear text paswords
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- When the install fails, log the full error description
- Added a specific exception for the supp pack installation failure
- Better action title (depending on the number of servers it applies to)
- Added a "More Info" button on the "Update" page, which displays a message with more information on the supp pack installation failure
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- If failed to retrieve the config parameters, then make the ConfigDriveTemplate textbox read-only and display the reason why it is not editable (similar with what we do for running VMs).
- In the New VM Wizard, if the action on "Reset to Default" button fails, then popup a message box with an error saying that we were unable to retrieve the default parameters. In this case, the ConfigDriveTemplate textbox remains unchanged.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- this applies to the Cloud-config page on the New VM Wizard and VM properties dialog.
- same for the container enlightenment page on the VM properties dialog.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- The cloud config parameters page is only visible on a VM that already has a config drive.
- The cloud config parameters can only be changed when the VM is halted.
- In the New VM wizard, if a template is selected that already has a config drive, them the wizard will display the existing configuration, not the default one.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Added HostOutOfSpaceProblem to let the user to clean up disk space when getting PATCH_PRECHECK_FAILED_OUT_OF_SPACE error at precheck stage in the patch install wizard.
-A bit of refactoring of DiskSpaceRequirements class in order to be reused here
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- don't update the progress bar when checking disk space (only the description)
- the color used for "in progress" action description (above the progress bar) should be the system default font color, not black
- actions should throw ArgumentNullException, not NullReferenceException
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Before starting the upload to the master hosts, check if there is enough disk space (check only performed for Cream or greater hosts)
- If enough space available the upload starts automatically; otherwise an error is displayed
- If we can free up enough disk space then we offer the option to Clean up. Otherwise we provide the user with the information on required and available space and the user will have to manually free up required space.
- Also Disable the Upload page for oem updates
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
UploadSupplementalPackAction:
- use http-put with the default timeout
- throw current exception in RemoveVDI (instead of encapsulating it in a new one)
- add other_config key before uploading to make sure the vdi has this flag set from the beginning of its lifetime
- upload progress bar now shows the total progress per row
Also included a cosmetic rewrite of PatchingWizard_PatchingPage,GetUpdateName function
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- update the Patch property even when the selected update type is not "Existing patch". This will be set it to null if the selected type is supplemental pack.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Select a supp pack in the hotfix wizard
- Recognise that it's a supp pack not a hotfix
- Check if there's enough space on a SR to contain it: (1) default SR if shared or (2) any shared SR or (3) local SR on each host in pool
- Create a VDI to contain it
- Upload the supp pack to the VDI
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added check for Clearwater SP1 or greater to the gpu capability on the New VM wizard
- On the GPU tab, draw the grid on the shiny bar only if the capacity is greater than one
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changes following code review:
- Added VM.CanHaveVGpu function (at the moment just returns CanHaveGpu, but it will change in the future)
- Added vGPU_type.IsPassthrough function and used it everywhere we needed to test for passthrough (max-heads==0)
- Simplified code in Helpers.GpuCapability, Helpers.VGpuCapability, NewVMWizard (gpuCapability), MainWindow and GpuRow
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
New properties:
- Pool.HasGpu = Pool has at least one PGPU
- Pool.HasVGpu = Pool has at least one PGPU that HasVGpu
- PGPU.HasVGpu = PGPU has at least one supported_VGPU_type that is not pass-through
New or modified helper functions:
- Helpers.GpuCapability = GPU feature not restricted (by licensing) and Pool.HasGpu
- Helpers.VGpuCapability = vGPU feature not restricted (by licensing) and Pool.HasVGpu
- Helpers.ClearwaterSp1OrGreater = API version is 2.1 or greater
The GPU dialogs are displayed as follows:
- GPU page on VM properties dialog: Visible only if VM.CanHaveGpu and the GPU feature not restricted (by licensing)
- GPU page on New VM Wizard: Visible only if VM.CanHaveGpu and the pool has GPU capability (Helpers.GpuCapability)
- GPU page on Pool properties dialog: Visible only if the pool has vGPU capability (Helpers.VGpuCapability)
- GPU tab: Visible only if the pool has GPU capability (Helpers.GpuCapability) and is Clearwater SP1 or greater
- On the GPU tab, the "Placement policy" panel: Visible only if the pool has vGPU capability (Helpers.VGpuCapability)
- On the GPU tab, the "Edit" button on the "vGPU types" panel: Visible only if the PGPU.HasVGpu and vGPU feature not restricted (by licensing)
Also:
- VM.CanHaveVGpu function renamed to CanHaveGpu
- On the GPU tab, renamed "Allowed vGPU types" to "vGPU types
Show pool (or standalone server) name on the Upload page.
Also corrected some resource strings.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added new page to the patching wizard, called "Upload" which displays the upload actions for each server and the progress of these actions
- MultipleAction: added the functionality to optionally stop the action on first failure
- Fixed the error where an existing patch downloaded from another server and then uploaded to a new one was not deleted on cancelling the wizard [CA-156788]
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
