before move; thus, if the SR does not support migration, the user can at least
detach the disk and try a move.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
home host from a shared to a local storage (while it was possible from the CLI).
Minor refactoring.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Allow move of multiple VDIs
- CA-187659: show better messages when batching move/migration of multiple VDIs.
- Show different tooltips for single vs. multiple VDI move/migration/deletion.
- Refactored the MoveDiskDdialog. Removed the inherited class VDIMigrateDialog and
the batching manager as it was not very different from its parent, it was registering
the events twice, and was batching migration of even single VDIs.
- Tidied up the Move- and MigrateVirtualDisk commands so they're easier to compare.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Was only able to move and not migrate vdi if selected from the objects view.
- The text on the ToolStripMenuItems on the SrStoragePage was different from the
corresponding buttons.
- Added item move/migrate to the multiple VDI context menu. The Properties item
should not be shown in this case.
- new image for PVS_site
- added cache size restrictions based on the SR selected
- added button to remove the PVS site on the page
- fixed the error where the subtext for a new PVS sites showed as "Not configured" even after it has been configured
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Replace PATCH_PRECHECK_LIVEPATCH_MISSING to PATCH_PRECHECK_LIVEPATCH_NOT_APPLICABLE due to changes in XAPI
Note: if XAPI change gets active before this change we will see UNKNOWN instead of PATCH_PRECHECK_LIVEPATCH_NOT_APPLICABLE in XenCenter what will make no difference
* CP-16922: UI changes to PvsPage to replace the single configure button with a separate enable and disable one, per the design doc
* CP-16922: Intermediate checkin - command + dialog implemented, but PVS page has some layout problems.
* CP-16922: Implement GUI for enabling PVS read caching and marking/unmarking VMs for prepopulation
Fix the broken layout by reverting MainWindow.resx (which shouldn't have changed) back to the previous commit. Also removed duplicate properties button code.
* CP-16922: PVS Page changes, to properly display all VMs (not just ones with proxy), only populating proxy columns if there is a proxy set.
* CP-16922: Use a CommandButton for the enable button, connected to the same command as the VM main menu button, and using the table selection as its selection manager.
* CP-16922: Delete the old enable button click behaviour (because it now has a proper command), was causing the dialog to show up twice
* CP-16922: Properly list VMs by hiding those that should be hidden (in addition to non-VMs, also hide the __gui__ prefix and others covered by Show function). Also fixes a bug in NewVMGroupVMsPage discovered when fixing this - it would show VMs that should be hidden if you used the search bar.
* CP-16922: Use ButtonText on the Command to set the text on the PVS enable button
* CP-16922: Add the disable PVS read-caching command, and its associated proxy destroy action. Both based off enable equivalents (main difference is no dialog for now). Not used yet but will be in main window menu + disable button
* CP-16922: Add disable PVS read-caching to the main window menu (under enable), with the disable command attached to it
* CP-16922: Add support for disabling PVS read-caching for selected hosts via the PVS tab page by converting the disable button into a CommandButton in the same way as the enable button, using its own command + selection manager (because Selection Managers only bind to one control)
* CP-16922: Design - adding the "read caching enabled" column from the design, so that we display both whether caching is enabled and whether the VM is currently cached. If it's disabled all other values are missing.
* CP-16922: Add the PVS site column per the design to show the site a VM's PVS Proxy is on if it has a proxy
* CP-16922: Add an event handler for VMs changing so that newly provisioned VMs immediately show up in the PVS tab page
* CP-16922: Support for properly remembering the selection when the VM list is refreshed. A new method returns the list of VMs for the selected rows, and we can then check if the VM for the row being added is in this list. If there was no previous selection then we still select the first row by default.
* CP-16922: Remove prepopulate, which is being removed from the design. The next XAPI version will remove it, so just pass False as prepopulate for now, and remove the option from the dialog and PVS tab page.
* CP-16922: Improve UI appearance for a missing Storage Repository. Per the design, if there is no SR show the message None (memory only) instead of an empty cell
* CP-16922: Improved sorting behaviour. All columns (except VM name, which always uses it) use the VM tag as a sorting fallback (since they all have duplicates). New default sort which sorts by caching enabled first (yes before no), and then VM tag as a tiebreaker. Support for remembering the current sort on refresh, ie when a value changes.
* CP-16922: Refactoring to use a VM extension method to get the PVSProxy (or null if none exists) for a VM. This was used in the PVS Page + commands which are now much simpler.
* CP-16922: Move where the SelectionChanged event handler is set when refreshing the PVS table, so that the command buttons are updated correctly.
* CP-16922: Improvements to PVS read-caching dialog. Set accept/cancel buttons properly + adjust tab values, so focus acts as expected
* CP-16922: Remove the images from the menu for Enable/Disable PVS read-caching, most commands in the menu don't have one
* CP-16922: Sorting out the strings for the actions + ParallelAction calls, and moving them into the resx. Also reverting wrong MainWindow.resx changes.
* CAR-2184: XAPI changes. I've made the minimal possible changes to PvsPage to ensure it compiles, but it's had a lot of feature work (CP-16922) that supersedes this, these small changes should keep that merge painless.
* CAR-2184 XAPI: Reverse the unrelated changes, only keep the PVS ones.
* CP-16922: Merge latest XAPI changes, notably changes to Pvs_site.create
* CP-16922: Change tab show/hide logic for PVS tab, show it even if there are no PVS sites.
* CP-16922: Implement GUI for enabling PVS read caching
Design changes - remove the storage repo column and replace it with status, which is populated with a friendly version of the pvs_proxy_status enum. Also populate site list using site.name_label
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* CP-16922: Implement GUI for enabling PVS read caching
Adjusting the CanExecute of Enable PVS read-caching command to require at least one PVS site to be created. Since the PVS tab can show up without any sites, we need this because we can't create a proxy without a site.
* CP-16922: Code review changes.
Tidied up messages, and ensured actions run async properly, and without exiting before their task.
* CP-16922: Code review changes.
Update dialog resx, wider combobox on dialog, update action descriptions before setting RelatedTask, add friendly message body for PVS error notifications.
* CAR-2184: XAPI changes. I've made the minimal possible changes to PvsPage to ensure it compiles, but it's had a lot of feature work (CP-16922) that supersedes this, these small changes should keep that merge painless.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
* CAR-2184 XAPI: Reverse the unrelated changes, only keep the PVS ones.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
- The value of the spinner control is rounded to the nearest, while the minimum is rounded up and the maximum down (or, in some cases, min and max are not rounded at all).
In most cases this is fine, but if the current value (in bytes) is equal to one of these ranges, by rounding this way we might end up with a value that is outside of the control's ranges (causing ArgumentOutOfRange exception).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Leaving the new pool's name field empty, forcing user to enter a name before the Next button is enabled.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
We already renamed the column to target server, this changes the message in the case where the user doesn't choose a server on this page to also use target server.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
The bad message was in the dialog created in the BugToolWizard after selecting servers. Since this method is the only one using the ActionProgressDialog(String) constructor, I've modified that ctor to hide the subaction label - which makes sense because there is no action in that ctor (to set a subaction) and no other appropriate label.
Shorten the ellipsise to the first 40 characters instead of 45, which allows the ellipsis, quotation and question marks to fit correctly onto the line.
avoid buttons on the console tab overlapping. Removed some panels from the console
tab to reduce control nesting.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- show/hide the context menu items instead of creating and adding new ones each time the context menu opens
- right click menu with rescan/add was not available for empty list or when empty space was clicked
- the condition for the edit button was slightly different from the edit toolstripmenuitem
- improved button layout (part of CA-100083)
- tidied up button event handlers and renamed one or two class members
- removed unused parameter in constructor and method of VDIRow
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- fixed issue where the context menu with add/attach items was not available
for empty list or when empty space was clicked; in the latter case I also clear
the selections
- added ability to launch the context menu by using the windows properties button
- moved context menu to the designer; changed code to show/hide the relevant menu
items instead of adding new ones each time the context menu opens
- added icon to the context menu item Properties
- fixed button layout (part of CA-100083), then removed separators between buttons
because when they wrap it looks a bit strange
- fixed some weird cross-threading exception (could not reproduce reliably)
- renamed one or two class members and tidied up the button event handlers
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Fixed regression caused by 5555709337.
Supplemental packs can now be installed again in automatic mode.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Adjusted messages, and added a tooltip to the Automatic restart radio when it's disabled. Also now support standalone hosts in addition to pooled.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
Expose both the HIMN network and any VIFs associated with the HIMN
network using XenCenter when the "View->Show Hidden Objects" option
is displayed. However the shown HIMN should not be able to autoplug,
edit or delete.
Changed the ellipsise length from 45 to 90 characters. This means that the first row of text becomes variable length, so I've reworked the dialog to support this and work like others: icon/rows of text in table cells, right aligned flow panel for buttons.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
- When building the list of servers that require post-install actions, ignore the ones where the patch has already been installed.
- Also fixing the infinite recursion in Build() method (causing StackOverflowException when installing a supplemental pack).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
This fixes the NullReferenceException that occurs when trying to evacuate a host after a non-livepatch update (that requires reboot) has been installed
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The truncating of the custom field name by space (instead of ellipsising) seems to be a Windows default, but it's not ideal. This change edits the text displayed in the dropdown when an item is selected so that if a custom field is selected it is ellipsised to an appropriate length. It doesn't affect the dropdown itself, which continues to display the full custom field name.
Making the requested changes: Name is now sorted by the generic CompareTo method (which uses name with opaque ref as tiebreaker), and Description also uses opaque ref as tiebreaker for consistency.
XenCenter will check host.patches_requiring_reboot when a host restart is due while a batch update is in progress. If the restart is not required, XenCenter will skip relevant PlanActions.
The intention here is to check this whenever a restart is due according to the original schedule - this way a completely livepatchable update can prevent the restart while the key batch hotfixing logic is not changed.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Automatic is disabled if any pool forbids auto restart (per Neptune), and reboot is required. It's also disabled if the update type isn't one of the three in the switch statement. If it's enabled it is checked by default.
Change the sorting on the Name and Description columns to use StringUtility.NaturalCompare, which correctly sorts strings with numbers at the end (eg name, name0, name1, name2, name10 will now sort correctly while alphabetic sorting is incorrect). Also added a tie break on uuid to make sorting behave predictably with duplicates in these columns.
other than strings. Moved settings of the FullScreenForm from the VNCTabView to
the former class. The FullScreenFormof the VNCTabView is only initialised as
FullSCreenFrom so no casts are necessary. The FullScreenForm is responsible for
updating the connection bar text with the value obtained from the vncScreen everytime
the name of the connection changes. Also reduced visibility of certain members.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
to be shown. It is complicated to have the one control call a method in the other
which checks the state on the first control.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
If we are expecting to live patch, but at the end
hosts.patches_requring_reboot contains the patch, then warn the user that
live patching has failed for the host - and it needs to be rebooted.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
This commit implements the check for LiveUpdate capability of a patch. If
the patch is completely live-updatable, XenCenter will not restart the
host (but will do further checks once it has finished installing the
update - separate ticket)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Now using the EscapeAmpersands string extension method. Also resolved the custom fields display issue in the same way.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
The ticket said the character after the & became a hotkey (like labels etc do with UseMnemonic enabled) but I couldn't reproduce that - & symbols were simply removed from the string. The fix is to replace them with &&, so the string.format prints a single & as it should.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
the checks before the page is loaded. Corrected the conditions for enabling the
Previous and Next buttons on this page. This commit fixes broken RPU wizard test.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Comparing uuids instead of references that likely will be changed after the Cache has been repopulated.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- when the cd drive or the tools iso cannot be found, the action should fail.
- if the tools SR is broken, do not show the error on a pop-up because the UX is
bad when installation is attempted on multiple VMS.
- added one more entry to the list of possible tools iso names.
- small performance improvement.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Generalising to also support pools. New CheckHostPatchesRequiringReboot method with the same behaviour as old method (return list of KeyValue warning messages). Pool updates on Ely use the union of messages from this method instead of the old one. Also localised the "{hotfix} on {server}" string per todo (hence resx changes).
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
For servers running Ely or greater we now produce messages for patching requiring reboot using the host.patches_requiring_reboot field. The Pool_patch objects resolved are sufficient to produce the same messages. Note that some patches produce a message in the old API but not the new, this is intentional. Still to do: update pool updates in the same way,
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
Now behaves as expected - alert interval (top control) has lowest tab stop, all other groups incremented by 1.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
Instead of adding a second table layout panel for the rubric label, I have extended the original table to include two new rows at the top - one for the label rubric, and one for the repeat interval controls (previously not in the table).
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
The CancelHostConnectionCommand executes by using a DisconnectCommand, so the fix here is to allow that command to execute on connections in progress as well as those that are connected.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
By passing null as the srHost parameter to the affinity picker, the "no home server" radio button remains enabled, even when no shared SRs are available, allowing users to unset the home server of a VM
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Mostly just terminology changes from home server to target server in the CPM wizard. Changes in shared component SelectMultipleVMDestinationPage (shared with ImportWizard) to allow CPM wizard to rename the Home Server column (as it can the VM/template one - using the same pattern).
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
This is resolved by moving the label into a TableLayoutPanel, docked to the top and with auto-grow on.
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
- Moved progress bar at the bottom of the page and made it the same height as on Upload page; This progress bar is now used when the prechecks are performed (existing functionality) and also for the "resolve" actions (new functionality).
- Added a label for displaying action progress.
- The icon and label saying that you need to resolve problems is hidden when there are no issues found and when an action is in progress (when the progress label is shown instead).
- When a resolve action is in progress, all controls on the page are disabled, apart from Cancel; pressing Cancel will cancel the "resolve" action and the wizard.
- Also put everything in a TableLayoutPanel (hence all the designer changes)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Add the Live Patching tab as a new part of PropertiesDialog, shown for pools and standalone hosts. Tab contains one checkbox which toggles the live_patching_disabled XenServer API property. Not yet implemented: license check ("The option should only be shown if the pool is licensed")
Signed-off-by: Callum McIntyre <callumiandavid.mcintyre@citrix.com>
Partially upgraded pools are not supported. If the versions of servers mismatch in a pool, Automatic updating will be disabled with the appropriate info message.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
even when automatic mode was supported for them. The problem was that the xenserver
versions were not retrieved from the DownloadUpdatesXmlAction once the latter had run.
Also, minor refactoring.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Added Control Domain memory entry in the host memory control on Memory tab.
- Control domain memory is editable for Ely and greater hosts.
- Can be changed from a dialog that requires host to be in maintenance mode and triggers a host reboot after the memory is changed.
- This dialog is available from Server main menu and from the host memory tab.
- Also removed unused unit controls on host and VM memory bars.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
If there is no <minimalpatches /> tag, the version is not supported. This check has priority over licensed state when displaying the reason why a server is not supported.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
hotkeys; button enabled state; some memory leaks; added spinner while check for
updates is in progress; added alternative text for when automatic mode is not available.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Implemented pre-check to check whether there is enough free disk space
before starting updating a pool.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
more obvious to the user that they can edit it. To this purpose change the button
Properties to Edit (and do the same on the Networking page for consistence). Also
show the name of the disk (ellipsized if too long) on the wizard's finish page.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Add a new update to the list of uploaded updates only when the upload action has completed successfully.
- Do not perform the disk space check if there is nothing to upload (update has already been uploaded).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
in the calculation of the never-expiring licence ("greater than 3653 days" in
LicenceAlert and LicenceStatus vs "greater than or equal to 3653 days" elsewhere).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Despite the update sequences are correct by host, when they are flattened, the original order (order in minimal patches) was not considered properly, so a missing patch was scheduled for later in the sequence than it should have been, thus the upgrade failed with a precheck-error.
This bug occurs when we are given
* a pool of more than one host,
* with (at least) patchA not installed on 2 or more hosts
* patchA requires patchR that is not installed on at least one of the above hosts (but not not on all)
* the host that is missing patchR is ahead of other hosts in pool.Hosts.Cache
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
The PatchPrechecksOnMultipleHostsInAPoolPlanAction did not filter the patchmappings by masterhost, so with some probability, it could choose the wrong mapping (pool_patch object for the same update, but in different pool). This bug is being fixed in this commit, other changes only renamed (for more consistent naming) a class and removed an unused field.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- The "Alarm Settings" action on Alerts page should open host's properties dialog for Dom0 alerts
- Also added help id for the Control Domain Memory Usage alert
Removed unused properties.
Added new string resource to set the pvs farm dialog's title.
Extended XenAPI's PVS_farm class to override Name property to allow for simpler sorting code.
Removed embedded icon in resource file; dialog now inherits the application's icon.
Signed-off-by: Frezzle <frederico.mazzone@citrix.com>
Added event handlers for changes made to PVS server; it may end up calling Rebuild() twice but that's not a problem.
Signed-off-by: Frezzle <frederico.mazzone@citrix.com>
Even though the correct row have been selected by the time the grid becomes visible, it is not displayed properly. This change set fixes the problem by selecting the row again.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Bugs fixed:
* OK button not re-enabling when switching back to using existing credentials in Health Check Enrollment dialog
* Using empty credentials to authenticate with Citrix Insight Services does not disable OK button in Health Check Enrollment dialog
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
a selected item collection - there was no need to make temporarily each one of them
the command selection just to call CanExecute on them. (2) Do not mix the methods
returning the can't-execute-reasons (which can be unknown) with the tooltip property
(which can be null).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
to null, otherwise the wrond text is shown for items with null can't-execute-reason
that are selected after items with non-null can't execute reason.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
FolderBrowser dialogs. Fixed text which caused label to look unaligned. Prevent
crash when attempting to launch the DownloadAppliance dialog with "http://" as URI.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Changes following code review
- Made PVS tab localizable and added Chinese and Japanese resources
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
In the New Network wizard, when the "Single-Server Private Network" type is selected, the Network settings page should not display the MTU hint message, because it is not relevant to any controls on the page
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
title so we can tell the one from the other. For consistency I used a format similar
to Import/export XVA. I also removed the gerund from the latter as it cannot be
used when the action is completed.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
XenCenter no longer ignores checking if the master host already has the specified patch applied; it now checks before trying to apply it, which means we get no error in the Patching Wizard's Patching Page.
Signed-off-by: Frezzle <frederico.mazzone@citrix.com>
- tab visible on pool or standalone server if the feature is not restricted and the pools has at least one farm
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* [CA-214953] Multiple connection dialogs while attempting to connect
ConnectingToServerDialog now keeps track of the dialogs for each connection and focuses on them if they already exist, instead of creating new ones.
Signed-off-by: Frezzle <frederico.mazzone@citrix.com>
* [CA-214953] Multiple connection dialogs while attempting to connect
Moved code to handle open connection dialogs to XenConnectionUI, instead of being done inside ConnectingToServerDialog.
Only one error message appears now upon connection failure.
If connection dialog was minimized, and user double-clicks again to connect, it now returns to normal state on the screen as well as taking focus.
Signed-off-by: Frezzle <frederico.mazzone@citrix.com>
Also fixed a similar issue, where the broken SR was selectable (Create new virtual disk from the SR Storage tab)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
VMstorage page uses the default colours of the controls, hence we only need to set
them on the VNCTabView and the linklabel does not need to be public.
Where (in code removed by this commit) we iterated through the planActionsByHost dictionary, the hosts were iterated through in the order how the dictionary was initialized. Despite the actions were added in the right order, they then were screwed up, because the Cache.Hosts can have the hosts randomly while we want the master to be first.
To fix the bug, I changed the data structure from a dictionary to a list that has the actions exactly in the (good) order, the order they were added, eliminating the risk of the actions being retrieved in the wrong order.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Refactored to hide/show error controls instead of adding/removing them. Removed duplicate null check.
Do not use a second list to track active VM consoles.
Fixed display issue, now showing pools (and standalone hosts at the same level), not masters.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- removed unnecessary casts
- no need to catch exception only to rethrow it; do not interrupt the call stack by using "throw ex"
- redundant check and value setting
- For Dundee and newer hosts: the feature is restricted only if the "restrict_ssl_legacy_switch" flag exists and it is set to true
- For pre-Dundee hosts: the feature is restricted if the "restrict_ssl_legacy_switch" is absent or it is present and set to true
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
VM with the hci-warn-before-shutdown flag. Minor changes to make the warnings for
rebooting and shutting down more consistent (preselect the No button for rebooting;
extended the Yes button text; modified warning text)
If the license does not allow VM migration, then cause the VMs to be shut down / suspended on the pre-checks page
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The last pGPU's row was stretching to the bottom, causing the lowest select box to fill its space and go down too much.
Changed the select boxs' dock style and margin.
Signed-off-by: Frederico Mazzone <fredericom@citrite.net>
Changed heading from Recommended Updates to Required Updates following further discussions around wording
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Showing recommended* hotfixes for servers when the data is available (Check For Updates xml has been downloaded and has minimalPatches node in it for the given server version). *:Not applied ones from the minimal set.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CA-77990: Report required actions for all VMs at once in the hotfix wizard / RPUW
* CA-77990: Resolve precheck problems in parallel in the Patching wizard
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-77990: Resolve precheck problems in parallel in the Patching wizard
Changes following code review: Made the ParallelAction work across connections and removed CrossConnectionParallelAction
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-77990: Modified ParallelAction to create queue on RunSubActions only, with the correct queue size
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Added support for defining custom update.xml location in Registry. This
can be either a local file or an URL. This will be beneficial when testing XenCenter.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Changed the FolderAction class so that it can be used to delete or move multiple folders across connections, instead of having multiple actions (one for each holder) which can not run in parallel.
- The api calls that update the EMPTY_FOLDERS entry in pool's other_config are preformed last for all connections, avoiding cross-thread exceptions when two threads try to add/remove the same key.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
DownloadUpdatesXmlAction is called on PageLeave and not when the user selects Automatic Mode. This way we get the error message at the right time, also showing a progress dialog what makes the UX much better.
New tooltips for servers on the Select Server Page to to cover two more cases
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
All event handlers are now unsubscribed when AttachDiskDialog is closed, allowing its memory to be garbage collected.
Image for each VDI now references an existing image instead of creating a new object.
Signed-off-by: Frederico Mazzone <fredericom@citrite.net>
My commit fixes the error message so the dialog will show "Could not create SSL/TLS secure channel." instead of "An unknown error occurred". This text is localised.
Unfortunately we see only a WebException with Status=SecureChannelFailure with no other details - couldn't provide an improved error message
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Added AD-related strings to japanese and chinese resource files; still need translation.
Changed F1/Help mapping of the AD upsell tab to go to the 'Managing Users' help page.
Signed-off-by: Frederico Mazzone <fredericom@citrite.net>
Implemented error handling.
If there has been an error in a pool, we stop executing actions in that pool immediately, and report the error once every other actions have finished. Error in one pool will not affect the upgrade process of other pools.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Made textbox bigger in health check policy dialog.
Made textbox bigger in the 'Authentication with Citrix Insight Services'
section of the health check enrollment dialog.
Adjusted some control properties to correct the position of OK/Cancel
buttons.
Changed 'User name:' labels to 'Username:' in health check enrollment
dialog.
Changed Chinese and Japanese resource files to match English changes.
Signed-off-by: Frederico Mazzone <fredericom@citrite.net>
* CA-210732: XenCenter VM properties GPU always shows "None"
The error occurs when there is a gpu group with only one vgpu type: When setting the selected item in the vGPU combobox, XenCenter tries to select the group header instead of the vGPU type; because the group header is not selectable, we then default to "None".
With this fix, we ensure that two items are not equal if one is a group header and the other is a subitem.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-210732: XenCenter VM properties GPU always shows "None"
Changes following code review: Added the reverse case in the Equals function
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-210732: XenCenter VM properties GPU always shows "None"
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Removed the first item instead of changing it - it is more logical to not to have it displayed here.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
