title so we can tell the one from the other. For consistency I used a format similar
to Import/export XVA. I also removed the gerund from the latter as it cannot be
used when the action is completed.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- tab visible on pool or standalone server if the feature is not restricted and the pools has at least one farm
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
VM with the hci-warn-before-shutdown flag. Minor changes to make the warnings for
rebooting and shutting down more consistent (preselect the No button for rebooting;
extended the Yes button text; modified warning text)
If the license does not allow VM migration, then cause the VMs to be shut down / suspended on the pre-checks page
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Showing recommended* hotfixes for servers when the data is available (Check For Updates xml has been downloaded and has minimalPatches node in it for the given server version). *:Not applied ones from the minimal set.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CA-77990: Report required actions for all VMs at once in the hotfix wizard / RPUW
* CA-77990: Resolve precheck problems in parallel in the Patching wizard
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-77990: Resolve precheck problems in parallel in the Patching wizard
Changes following code review: Made the ParallelAction work across connections and removed CrossConnectionParallelAction
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-77990: Modified ParallelAction to create queue on RunSubActions only, with the correct queue size
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
DownloadUpdatesXmlAction is called on PageLeave and not when the user selects Automatic Mode. This way we get the error message at the right time, also showing a progress dialog what makes the UX much better.
New tooltips for servers on the Select Server Page to to cover two more cases
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
My commit fixes the error message so the dialog will show "Could not create SSL/TLS secure channel." instead of "An unknown error occurred". This text is localised.
Unfortunately we see only a WebException with Status=SecureChannelFailure with no other details - couldn't provide an improved error message
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Implemented error handling.
If there has been an error in a pool, we stop executing actions in that pool immediately, and report the error once every other actions have finished. Error in one pool will not affect the upgrade process of other pools.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Added a Precheck to the RPU wizard, to check if the hosts in the pool have different CPU feature sets (using the old feature check for pre-Dundee pools) and display an error, offering to shut down all VMs.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
There is a new pool join rule in xapi: the joining host may only have physical PIFs, i.e. no bonds, VLANs and tunnels (cross-server private networks). This is checked by asserting that for all PIFs of the joining host, PIF.physical = true. When this occurs, people should be encouraged to manually remove any existing bonds, VLANs or tunnels and try again.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
1. Changed the Messages to remove ambiguity between scheduled snapshots and
snapshot schedules
2. Made some functions as properties in IVMPolicy
3. Removed some redundant code
Signed-off-by: Koushik Chakravarty <Koushik.Chakravarty@citrix.com>
- InvisibleMessages.resx contains the default value for the saved search (xensearch), which can be overwritten in Branding.cs
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- InvisibleMessages.resx contains the default value for the update file extension (xsupdate), which can be overwritten in Branding.cs
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Updated the GetLocation extension method for ActionBase objects to return action.Connection.FriendlyName should it have no Host or Pool set up. This way we see location for MeddlingActions.
Also changed some messages (Task Names) to include "VM" in them too, because xe command line initiated VM lifecycle actions looked really misleading after the above fix in XenCenter (Eg. restarting a VM would show up as "Restarting", "server" which would suggest that not just the VM, but the host is being restarted.)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Show "Able to receive Updates via Windows Update" or "Able to receive Updates via Windows Update" for Windows VMs
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Now CrossPoolMigrateCanMigrateFilter can accept a parameter to decide whether to allow same target pool or not -- if allowSameTargetPool is false, it won't.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Revert "Merge pull request #708 from GaborApatiNagy/master_windows_update"
This reverts commit fe03f1382f, reversing
changes made to 423065a2c8.
Conflicts:
XenAdminTests/TabsAndMenus/MainMenuGeorge.cs
- added Case Number edit box on the Destination page of the wizard
- valid case number needs to be 9 or less digits
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Implementing Upgrading VMs to Windows Update
New screen features:
-Create skeleton of the Upgrade VM dialog
-Implement a Go To Console link (just a link that opens a vm console)
-Implement logic to show the right status for a VM (includes rules to
get the states). Includes updating the dialog whenever the status changes.
-Add status texts to Messages, proper text on the UI
-Add stub methods to VM class in XenAPI-Extensions to r/w states from
Guest Agent
-UI: Implement rules what vms to display, checkbox rules, read only vms,
and when to enable the Upgrade button
-Implement Upgrade button (writes state for GA, mounts ISO) + maximum
parallel executions/actions
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Changed the virtualization state values on the search to: Not optimized, Unknown, Out of date, I/O optimized only, Management Agent installed, Fully optimized ("Management agent installed" not included)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Moving GetVirtualisationWarningMessages back to VM
Also added EVACUATE_HOST_INSTALL_MGMNT_PROMPT what is shown on the EvacuateHostDialog when a 'new' VM is given and Management Agent can be installed
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- If the new disks cannot be created because their total initial size is greater than the SR free space, then an error icon (with tooltip) is displayed and Next button is disabled.
- If the total size of the new disks is greater than the SR free space, but the disks can still be created (because the initial allocation is smaller), then a warning icon (with tooltip) is displayed and Next button is enabled.
- The tooltip mentions the initial space required for thinly provisioned SRs (initial allocation).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- when the user changes the disk size (or initial allocation), the selection in the SR list should not change and the list should not be automatically resorted
- users should not be allowed to create disks larger than the SR size (the SR is disabled and an explicit reason is displayed)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Removed PV_DRIVERS_NOT_INSTALLED=0 from the VirtualisationStatus [Flags]enum - 0 will mean the same (to avoid bugs with enum.HasFlag(0) is always true)
Extracted common code to VMLifeCycleCommand.GetCantExecuteNoToolsOrDriversReasonCore() method (instead of defining overridden GetCantExecuteReasonCore() method at this level, because not all child classes need this...)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Creates a new function MemorySizeStringSuitableUnits that takes one more parameter that specifies the units that must be used when the number of bytes is 0.
Removed Optimized state and using I/O & Management instead (even for old VMs)
Changed messages to be different for old and new VMs instead of saying Tools or I/O drivers for instance
Removed the extra enum property from the VM class that had been added for search
Fixed code in GroupingTypes class (possible KeyNotFoundException)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Extended the enum, aimed for minimal changes, also using Flags on the enum now
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- no “the” is needed in front of “Citrix Insight Services” (e.g. “…authenticate with Citrix Insight Services…” and not “…authenticate with the Citrix Insight Services…”)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Memory Tab uses GB units for values greater or equal to 1 GB, otherwise show in MB;
- Search Tab displays values in GB or MB in the same as the Memory Tab (e.g. 512 MB of 1 GB, 256 MB of 512 MB, 2.5 GB of 16 GB).
- The shiny bar present in the Memory Tab and in Memory Settings dialog shows the scaling in the following way: If smaller than 1 GB, then show as before, else show only labels with values multiples of half a GB.
- The units used in Memory Setting Dialog are set depending on the static_max. If it is greater or equal to 1 GB, then the units are GB, else MB. The user does not have the possibility of changing them.
- Thick provisioning - > Fully provisioned
- Subsequent allocations -> Incremental allocations
Also, updated the Next button on the Location page of HBA SR, to say "Next" for Dundee or greater and "Create" for pre-Dundee pools.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
CA-157785: Hotfix wizard forgets which servers should be greyed out.
When clicking Download and Install update in the Updates Tab, instead of opening a new dialog, it opens the Updates Wizard on the Select Servers Page and download the file in the Upload Page.
Fixes issue regarding the upload of the update every time that the user gets to Upload Page. Now it only uploads it if it has not been uploaded before.
Fixes issue regarding the download of the update every time the user goes back to the Select Patch Page. If the user goes back, but does not change the choice of the update, the download will not be done again.
- When "Request upload now" is clicked, instead of disabling it, change the link to an unclickable text saying "Upload requested at....".
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- show new NIC column on the Location page (visible for FCoE only)
- display the summary page
- resource strings for default SR name and the blurb on the first page in the wizard
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Changed code, because API needs 0-100 percent values as 0..1
-Code for HBA SRs
-Changed free space check for new VDIs to condider initial disk size only
when the SR is thin provisioned
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Added this information on the VM's general tab, and it could be one of the following:
- Operating mode: Paravirtualized (PV)
- Operating mode: Fully virtualized (HVM)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
testSafe2Upgrade pugin function in prepare_host_upgrade.py is called as part of the RPU pre-checks
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Changed the name of the operation in XenCenter to "Migrate VM" for suspended VMs, instead of "Move".
This clarifies the distinction between copy/move and migration:
- running and suspended VMs can only be migrated
- stopped VMs can be moved and copied
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
