* CA-359809 improved illegal character message
Signed-off-by: Christophe25 <christopher.lancaste1@citrix.com>
* CA-359809 cleared whitespace, improve code readability
Signed-off-by: Christophe25 <christopher.lancaste1@citrix.com>
* CA-359809 implemented reviewer comments.
Moved Path validator to XenModel Project where other language files have already been set up.
Improved error messages.
Signed-off-by: Christophe25 <christopher.lancaste1@citrix.com>
* CA-359809 improved string localisation, Code tidy
Cannot became can not, messages file alphabetised, improved readability with using xenmodel as opposed to direct call
Signed-off-by: Christophe25 <christopher.lancaste1@citrix.com>
* CA-359809 changed can not to cannot
Signed-off-by: Christophe25 <christopher.lancaste1@citrix.com>
Removed ApplyLicenseEditionCommand as it was unnecessary (there was no
button/menuitem calling it). Use the ApplyLicenseEditionAction instead.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- CA-359068¨Match the whole datasource name (previously the wrong one was picked
for disk read/write latency).
- New/edit Graph dialog: differentiate between enabled/disabled datasources and
visible/hidden (known/unknown units; the latter may mean no data).
- Some refactoring.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
`reaonly` should be used for items that can't be modified. The changed collections/arrays are modified, so `readonly` is misleading
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
Mixture of correctly implementing `Trim()` calls, and removing calls that generate useless ephemeral variables.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
Also, no need to use a different message for single and multiple VMs or templates.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-34231: Replace negative language with `block list` in code and references
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `stop` in code and references
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `freezing` in code
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run/ran` in code comments
Some paramater mentions have been renamed, as they will be renamed in future commits.
Excluded mentions in XenAPI/Host.cs and XenAPI/VM.cs since code is autogenerated.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# CFUValidator/CommandLineOptions/CFUCommandLineOptionManager.cs
# XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
# XenAdmin/Dialogs/Wlb/WorkloadReports.cs
* CA-34231: Replace negative language with `run` in Command.cs Run method
Used Resharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/TabPages/GeneralTabPage.cs
* CA-34231: Replace negative language with `run` in Command.cs CanRun method
Used Resharper rename utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs CanRunCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/DRConfigureCommand.cs
# XenAdmin/Commands/DRDryrunCommand.cs
# XenAdmin/Commands/DRFailbackCommand.cs
# XenAdmin/Commands/DRFailoverCommand.cs
# XenAdmin/Commands/DisasterRecoveryCommand.cs
# XenAdmin/Commands/VMGroupCommand.cs
* CA-34231: Replace negative language with `run` in Command.cs RunCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs GetCantExecuteReasonCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs GetCantRunReasons method
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in Command.cs
Also applied to related symbols. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in methods named CanRun
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in methods in CrossPoolMigrateCommand.cs
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/CrossPoolMigrateCommand.cs
* CA-34231: Replace negative language with `run` in remaining Run methods
Also updated negative language in `DeleteVMCommand`
Also updated in comment in `CrossPoolMigrateCommand`
Also renamed missed instances of `CanRun`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in `CanRunCore` and `RunCore`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in Commands folder
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in XenAdmin/Controls folder
Used ReSharper renaming utility. Had to rename `WlbReportView.xs:RunReport()` to `WlbReportView.xs:StartRunReport()` to resolve conflict with change from `WlbReportView:ExecuteReport()` to `WlbReportView:RunReport()`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
# XenAdmin/Dialogs/Wlb/WorkloadReports.cs
# XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs
* CA-34231: Replace all remaining negative language with `run` in code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/Controls/WlbRecommendations.cs
# XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs
# XenModel/WLB/WlbScheduledTask.cs
* CA-34231: Replace negative language with `supporter` or `bond member` in code strings
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `supporter` or `bond member` in Messages string
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/MainWindow.cs
# XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace remaining negative language with `supporter` in .resx files
Used ReSharper renaming utility. FriendlyErrorNames.resx has been excluded.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `supporter` or `bond member` in XenAdmin code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace negative language with `supporter` or `bond member` in XenModel code
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in CFUValidator code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# CFUValidator/CFUValidator.cs
* CA-34231: Replace negative language with `coordinator` in solution's comments and hardcoded strings
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `Helpers:GetCoordinator` method
Used ReSharper renaming utility.
also renamed similarly named method in `ObjectChange.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Alerts/Types/HotfixEligibilityAlert.cs
# XenAdmin/Controls/CustomDataGraph/ArchiveMaintainer.cs
* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`
Used ReSharper renaming utility. Excluded jp and zh resources
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/EvacuateHostDialog.resx
* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`
Used ReSharper renaming utility. Excluded jp and zh resource files.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.resx
* CA-34231: Rename missing language references for change to `coordinator`
Misc files were not saved before last commits.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `Messages.resx`'s code
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/HACommand.cs
# XenAdmin/TabPages/AdPage.cs
# XenModel/Actions/Network/CreateBondAction.cs
# XenModel/Actions/Network/NetworkAction.cs
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace negative language with `coordinator` in `ExternalPluginAction.cs`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`
Used ReSharper renaming utility. Also replace negative language in missed comment in `ExternalPluginAction.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/AddHostToPoolCommand.cs
# XenAdmin/Commands/HACommand.cs
* CA-34231: Replace negative language with `coordinator` in `Helpers.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `NetworkingHelper.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `PoolJoinRules.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`, `Controls`, and `Core`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/AddHostToPoolCommand.cs
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Diagnostics`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Dialogs`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenAdmin`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/MainWindow.cs
# XenAdmin/TabPages/GeneralTabPage.cs
# XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeExtrasPage.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizard.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizardPrecheckPage.cs
# XenAdmin/XenSearch/Columns.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenModel\Actions`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenModel/Actions/Network/CreateBondAction.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenModel`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative strings with `main` in `Messages.resx`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace remaining negative string names with `main` in `Messages.resx`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs
# XenModel/Messages.resx
* CA-34231: Rename dialogs to replace negative connotations with `main`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `SaveAndResoreOptionsPage.cs`
Also updated its resx file. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs
* CA-34231: Fix invalid reference in `SaveAndRestoreOptionsPage.Designer.cs` after renaming
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `EnterMainPasswordDialog.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `ChangeMainPasswordDialog.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Fix invalid reference not changed after renaming `EnterMainPasswordDialog.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `main` in `XenAdmin/Dialogs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Update class names in HelpManager.resx
Following renaming of main password dialog. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `Metadata.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Remove remaning negative language with `coordinator` from `Messages.resx`
Used ReSharper renaming
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Remove remaning negative language with `other pool member` from `Messages.resx`
Used ReSharper
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language in solution
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Remove commented out code in VNCGraphicsClient.cs
Code has only been improved partially as it's not strictly relevant to the PR
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend negative word replacement in XSVNCScreen.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Simplify debug call formatting in NewPoolDialog.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Add code mistakenly removed in MainWindow.cs
Removed as part of `f155f9c8`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Revert renaming of constant related to Windows' API
Considered external to CH Center
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend hotkey for Coordinator field in `NewPoolDialog`
Previous ALT+<key> hotkey was conflicting with CreatePool
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Remove unecessary whitespace in EvacuateHostDialog.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Update if block to exclude unecessary else in DRFailoverWizard.cs
Not relevant to the PR, but the change is small enought to no need extra testing
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend typo in PoolJoinRules.cs
supporer -> supporter
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace missing negative language with `coordinator` in `XenAPI-Extensions/Pool.cs`
Variables and methods XenAPI-Extensions were mistakenly skipped
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace negative language in `XenApi-Extensions` with `coordinator/interface`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace negative language in `XenApi-Extensions` with `supporter/member`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace remaining negative language in `XenServerHealthCheckBugTool.cs`
This is only used to format the string
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Change line-endings to CRLF in `Page_CloudConfigParamters.cs`
Done in order to fix merge conflict into master
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend misc negative language renaming typos
`XenServerHealthCheckBugTool` and `XenServerHealthCheckService`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Hide GPU page if the host has no GPU capability
* Hid GPU page in PropertiesDialog
* Hid GPU page in NewVMWizard
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Move GPU availability check to Helpers class
* Switch from field to method based check
* Update affected logic
* Remove rubric toggle in PopulatePage when GpuEditPage is shown
* Hide AddVGPUDialog when GpusAvailable returns false
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Remove missing GPUs strings in Messages.resx
* GPU_RUBRIC_NO_GPUS_POOL
* GPU_RUBRIC_NO_GPUS_SERVER
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Disable combobox in AddVGPUDialog when there are no GPUs
Avoids exception being thrown if user tries to select empty first item
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Amend position of GPU availability check
Moved since gpuCapability is used in the Finish method of the wizard
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Remove unecessary null checks in Helpers method
The Cache and its properties (e.g. GPU_groups) are readonly and initialised as empty.
The API object properties that are ref lists (g.PGPUs, g.supported_VGPU_types) are also initialised as empty and are demarshalled by the SDK as empty if they have no values.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* The solution libraries do not need a config file like the applications.
In fact the config file of XenAdminTests was mostly an unneeded copy of the
XenAdmin app.config; the NUnit setting has moved to the AssemblyInfo in NUnit3.
* Removed unused XenOvfApi settings.
* The constants in the Settings were largely not configurable, hence I moved them into the code.
The ones marked with TODO will be revisited within CP-32779.
* Removed config file from library XenOvfApi. Restored broken cryptography algorithm lookup.
(The list of algorithms had been removed from the Settings within the fix to CA-350574).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* DataSet field Uuid is not really a uuid. Renamed to Id to avoid misunderstandings.
* Renamed properties DataSet.Type and DataSourceItem.DataType to Category. The old name was not reflecting what they were.
* Renamed property DataSet.TypeString to DataSet.DataSourceName so it reflects better what it is.
* Renamed property DataSet.Name to DataSet.FriendlyName for clarity. Removed duplicate string.Format() call.
* The DataSourceItem.Uuid is not really a uuid. Renamed it to Id to avoid misunderstandings. Also, compacted DataSourceItem constructors.
* Removed unused and duplicate properties.
- DataKey.Hide was unused. Once removed, DataSet.Deselected was unused, hence was also removed.
- Dataset.Draw was duplicating DataSet.Show, hence was removed.
- DataSet.NeverShow is not necessary, DataSet.Hide can be used both for datasources
that should not be shown at all as well as datasources that are wrong for this object.
* Made DataSet.FriendlyName a get-only property and compacted repetitive code.
* Use the Helpers regular expressions for assigning the datasource category.
* Removed id from the DataSet constructor parameters. It can be constructed from the XenObject and the datasource name.
* Compacted the code for readability (it was difficult to follow the build of the URIs).
Also, removed use of Helper.GetUuid to avoid the use of reflection. Minimised casts.
* CP-36567: Use the datasource units as specified in the API instead of deducing them from the datasource name.
- Also, merged static method DataSet.Create into the DataSet constructor.
- Minor restructuring of the ArchiveMaintainer file (moved all private fields
and properties closer together).
- Added new resource file so the units can be separated from Messages.
